Not all files we want to find using virFileFindResource{,Full} are
generated when libvirt is built, some of them (such as RNG schemas) are
distributed with sources. The current API was not able to find source
files if libvirt was built in VPATH.
Both RNG schemas and cpu_map.xml are distributed in source tarball.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Jumping to the cleanup label prior to starting the container failed to
properly clean everything up that is handled by the virLXCProcessCleanup
which is called if virLXCProcessStop is called on failure after the
container properly starts. Most importantly is prior to this patch none
of the stop/release hooks, host device reattachment, and network cleanup
(that is reverse of virLXCProcessSetupInterfaces).
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Modify the VIR_DEBUG message in virLXCProcessCleanup to make it clearer
about the path. Also add some more VIR_DEBUG messages in virLXCProcessStart
in order to help debug error flow.
https://bugzilla.redhat.com/show_bug.cgi?id=1176503
Move the two console checks - one for zero nconsoles present and the
other for an invalid console type to earlier in the processing rather than
getting after performing some setup that has to be undone for what amounts
to an invalid configuration.
This resolves the above bug since it's not not possible to have changed
the security labels when we cause the configuration check failure.
We do have a check for valid per-domain security model, however we still
do permit an invalid security model for a domain's device (those which
are specified with <source> element).
This patch introduces a new function virSecurityManagerCheckAllLabel
which compares user specified security model against currently
registered security drivers. That being said, it also permits 'none'
being specified as a device security model.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485
Signed-off-by: Ján Tomko <jtomko@redhat.com>
commit a58e1cb4 didn't fix the bug if the security_default_confined is
not set to 1. We now clean up even if there is no seclabel defined or
the default one.
Return 0 instead of ERR_NO_SUPPORT in each driver
where we don't support managed save or -1 if
the domain does not exist.
This avoids spamming daemon logs when 'virsh dominfo' is run.
https://bugzilla.redhat.com/show_bug.cgi?id=1095637
Record the index of each host-side veth device created and report
them to systemd, so they show up in machinectl status for the VM.
lxc-shell(95449419f969d649d9962566ec42af7d)
Since: Fri 2015-01-16 16:53:37 GMT; 3s ago
Leader: 28085 (sh)
Service: libvirt-lxc; class container
Iface: vnet0
Address: fe80::216:3eff:fe00:c317%124
OS: Fedora 21 (Twenty One)
Unit: machine-lxc\x2dshell.scope
└─28085 /bin/sh
Add more logging to the lxc controller and container files to
facilitate debugging startup problems. Also make it clear when
the container is going to close stdout and thus no longer do
any logging.
Don't create the cgroups ahead of launching the container since
there is no need for the limits to apply during initial bootstrap.
Create the cgroup after the container PID is known and tell
systemd the initpid is the leader, instead of the controller
pid.
Currently when launching the LXC controller we first write out
the plain, inactive XML configuration, then launch the controller,
then replace the file with the live status XML configuration.
By good fortune this hasn't caused any problems other than some
misleading error messages during failure scenarios.
This simplifies the code so it only writes out the XML once and
always writes the live status XML. To do this we need to handshake
with the child process, to make execution pause just before exec()
so we can write the XML status with the child PID present.
Currently the lxc controller process itself is responsible for
daemonizing itself into the background and writing out its pid
file. The lxc driver would fork the controller and then attempt
to connect to the lxc monitor. This connection would only
succeed after the controller has backgrounded itself, setup
cgroups and written its pid file, so startup was race free.
The problem is that we need to delay create of the cgroups to
much later, such that we can tell systemd the container init
pid when we create the cgroups. If we delay cgroup creation
though the current synchronization won't work.
A second problem is that the controller needs the XML config
of the guest. Currently we write out the plain virDomainDefPtr
XML before starting the controller, and then later replace it
with the full virDomainObjPtr status XML. This is kind of gross
and also means that the controller doesn't get a record of the
live XML config right away. This means it doesn't have a record
of the veth device names either and so can't give that info
to systemd when creating the cgroups.
To address this we change the startup sequencing. The goal
is that we want to get the PID as soon as possible, before
the LXC controller even starts. So we stop letting the LXC
controller daemonize itself, and instead use virCommand's
built-in capabilities. This daemonizes and writes the PID
before LXC controller is exec'd. So the driver can read
the PID as soon as virCommandRun returns. It is no longer
safe to connect to the monitor or detect the cgroups though.
Fortunately the LXC controller already has a second point
of synchronization. Immediately before its event loop
starts running, it performs a handshake with the driver.
So we move the opening of the monitor connection and cgroup
detection after this synchronization point.
Build the pidfile string once when starting a guest and then
use the same string thereafter. This will benefit following
patches which need the pidfile string in more situations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainDefineXMLFlags and virDomainCreateXML APIs both
gain new flags allowing them to be told to validate XML.
This updates all the drivers to turn on validation in the
XML parser when the flags are set
systemd-machined introduced a new method CreateMachineWithNetwork
that obsoletes CreateMachine. It expects to be given a list of
VETH/TAP device indexes for the host side device(s) associated
with a container/machine.
This falls back to the old CreateMachine method when the new
one is not supported.
https://bugzilla.redhat.com/show_bug.cgi?id=1165993
So, there are still plenty of vNIC types that we don't know how to set
bandwidth on. Let's warn explicitly in case user has requested it
instead of pretending everything was set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
The typical case for the problem is starting a domain needing a network
that isn't started. Even after starting the network, we get an unknown error
when starting the container.
This is due to dynamic security label not being removed.
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Some programs want to change some values for the network interfaces
configuration in /proc/sys/net/ipv[46] folders. Giving RW access on them
allows wicked to work on openSUSE 13.2+.
Reusing the lxcNeedNetworkNamespace function to tell
lxcContainerMountBasicFS if the netns is disabled. When no netns is
set up, then we don't mount the /proc/sys/net/ipv[46] folder RW as
these would provide full access to the host NICs config.
lxcProcessSetupInterfaces() used to have a special case for
actualType='network' (a network with forward mode of route, nat, or
isolated) to call the libvirt public API to retrieve the bridge being
used by a network. That is no longer necessary - since all network
types that use a bridge and tap device now get the bridge name stored
in the ActualNetDef, we can just always use
virDomainNetGetActualBridgeName() instead.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as
internal error: guest failed to start: Kernel doesn't support user
namespace: Link has been severed
We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The typical case where we had a problem is with such a filesystem
definition as created by virt-sandbox-service:
<filesystem type='bind' accessmode='passthrough'>
<source dir='/var/lib/libvirt/filesystems/mysshd/var'/>
<target dir='/var'/>
</filesystem>
In this case, we don't want to unmount the /var subtree or we may
loose the access to the source folder.
Resolving symlinks can fail before mounting any file system if one file
system depends on another being mounted. Symlinks are now resolved in
two passes:
* Before any file system is mounted, but then we are more gentle if
the source path can't be accessed
* Right before mounting a file system, so that we are sure that we
have the resolved path... but then if it can't be accessed we raise
an error.
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When user calls setmem on a running LXC machine, we do update its cgroup
entry, however we neither update domain's runtime XML nor
we update our internal structures and this patch fixes it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1131919
If the memory mode in numatune is not 'strict', we should not setup
cpuset.mems. Before commit 1a7be8c600
we have checked the memory mode in virDomainNumatuneGetNodeset. This
patch adds the check as before.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around. This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.
The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.
Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c8515620) that doesn't support
non-contiguous nodesets. It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.
[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
A domain without a console quietly dies soon after start,
because we try to set /dev/null as a controlling TTY
2014-10-30 15:10:59.705+0000: 1: error : lxcContainerSetupFDs:283 :
ioctl(TIOCSCTTY) failed: Inappropriate ioctl for device
Report an error early instead of trying to start it.
https://bugzilla.redhat.com/show_bug.cgi?id=1155410
It fails after 30 seconds with this error:
error : virDBusCall:1429 : error from service: CanSuspend:
Did not receive a reply. Possible causes include: the remote
application did not send a reply, the message bus security
policy blocked the reply, the reply timeout expired, or the
network connection was broken.
Only probe for the power mgmt capabilities when driver is non-NULL.
This speeds up domain startup by 30 seconds.
https://bugzilla.redhat.com/show_bug.cgi?id=1159227
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
https://bugzilla.redhat.com/show_bug.cgi?id=993411
On some systems (using libtirpc instead of glibc's
implementation), xdr_uint64_t exists rather under different name:
xdr_u_int64_t. This makes compilation fail then:
libvirt_lxc-lxc_monitor_protocol.o: In function `xdr_virLXCMonitorInitEventMsg':
/usr/local/src/libvirt/libvirt-1.1.1/src/./lxc/lxc_monitor_protocol.c:31: undefined reference to `xdr_uint64_t'
Therefore we rather mirror the d707c866 commit and redefine
xdr_uint64_t if needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Clean up all _virDomainMemoryStat.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainBlockStats.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Clean up all _virDomainInterfaceStats.
Signed-off-by: Wang Yufei <james.wangyufei@huawei.com>
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
If we jump to cleanup before allocating 'result', then the call to
virBlkioDeviceArrayClear() could dereference result
Signed-off-by: John Ferlan <jferlan@redhat.com>
I'm about to add a syntax check that enforces our documented
HACKING style of always using matching {} on if-else statements.
This patch focuses on drivers that had several issues.
* src/lxc/lxc_fuse.c (lxcProcGetattr, lxcProcReadMeminfo): Correct
use of {}.
* src/lxc/lxc_driver.c (lxcDomainMergeBlkioDevice): Likewise.
* src/phyp/phyp_driver.c (phypConnectNumOfDomainsGeneric)
(phypUUIDTable_Init, openSSHSession, phypStoragePoolListVolumes)
(phypConnectListStoragePools, phypDomainSetVcpusFlags)
(phypStorageVolGetXMLDesc, phypStoragePoolGetXMLDesc)
(phypConnectListDefinedDomains): Likewise.
* src/vbox/vbox_common.c (vboxAttachSound, vboxDumpDisplay)
(vboxDomainRevertToSnapshot, vboxDomainSnapshotDelete): Likewise.
* src/vbox/vbox_tmpl.c (vboxStorageVolGetXMLDesc): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
We lacked of HOME environment variable,
set 'HOME=/' as default.
The kernel sets up $HOME for the init process.
Therefore any init can assume that $HOME is set.
libvirt currently violates that implicit rule.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Memory is allocated for 'mnt_src' by VIR_STRDUP in the loop. Next
loop it will be allocated again. So we need to free 'mnt_src'
before continue the loop.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
On some places in the libvirt code we have:
f(a,z)
instead of
f(a, z)
This trivial patch fixes couple of such occurrences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The gid value passed to devpts has to be translated by hand as
virLXCControllerSetupDevPTS() is called before setting up the user
and group mappings.
Otherwise devpts will use an unmapped gid and openpty()
will fail within containers.
Linux kernel commit 23adbe12
("fs,userns: Change inode_capable to capable_wrt_inode_uidgid")
uncovered that issue.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
This patch changes the setmaxmem function to support the '--live',
'--config', and '--current' flags by revectoring the code through
the setmem function using the VIR_DOMAIN_MEM_MAXIMUM flag. The
setmem code is refactored to handle both cases depending on the flag.
The changed maxmem code for the MEM_MAXIMUM path will not allow
modification to the memory values of an active guest unless the --config
switch is used.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Otherwise this beautiful error would be overwritten when
the function is called with a really high rate number:
2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
Usage: ... qdisc add ... htb [default N] [r2q N]
default minor id of class to which unclassified packets are sent {0}
r2q DRR quantums are computed as rate in Bps/r2q {10}
debug string of 16 numbers each 0-3 {0}
... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
[prio P] [slot S] [pslot PS]
[ceil R2] [cburst B2] [mtu MTU] [quantum Q]
rate rate allocated to this class (class can still borrow)
burst max bytes burst which can be accumulated during idle period {computed}
mpu minimum packet size used in rate computations
overhead per-packet size overhead used in rate computations
linklay adapting to a linklayer e.g. atm
ceil definite upper class rate (no borrows) {rate}
cburst burst but for ceil {computed}
mtu max packet size we create rate map for {1600}
prio priority of leaf; lowe
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
This patch adds back the virDomainDef typedef into domain_conf and
makes all the numatune_conf functions independent of any virDomainDef
definitions.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1122205
Although the edits were changing in-memory XML, it was not flushed
to disk; so unless some other action changes XML, a libvirtd restart
would lose the changed information.
* src/conf/domain_conf.c (virDomainObjSetMetadata): Add parameter,
to save live status across restarts.
(virDomainSaveXML): Allow for test driver.
* src/conf/domain_conf.h (virDomainObjSetMetadata): Adjust
signature.
* src/bhyve/bhyve_driver.c (bhyveDomainSetMetadata): Adjust caller.
* src/lxc/lxc_driver.c (lxcDomainSetMetadata): Likewise.
* src/qemu/qemu_driver.c (qemuDomainSetMetadata): Likewise.
* src/test/test_driver.c (testDomainSetMetadata): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The patch described above introduced two problems caught by the compiler
and thus breaking the build.
One of the problems was comparison of unsigned with < 0 and the second
one jumped a variable init.
Before:
virsh # dominfo chx3
State: shut off
Max memory: 92160 KiB
Used memory: 92160 KiB
After:
virsh # dominfo container1
State: shut off
Max memory: 92160 KiB
Used memory: 0 KiB
Similar to qemu cases.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
kernel commit 7dc5dbc879bd0779924b5132a48b731a0bc04a1e
forbid us doing a fresh mount for sysfs
when enable userns but disable netns.
This patch will create a bind mount in this senario.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
LXC network devices can now be assigned a custom NIC device name on the
container side. For example, this is configured with:
<interface type='network'>
<source network='default'/>
<guest dev="eth1"/>
</interface>
In this example the network card will appear as eth1 in the guest.
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.
The XML looks like:
<interface type='vhostuser'>
<mac address='52:54:00:3b:83:1a'/>
<source type='unix' path='/tmp/vhost.sock' mode='server'/>
<model type='virtio'/>
</interface>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.
Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.
In lxc, we could not use setmem command
with --config options.
This patch will add support for this.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
In the future we might need to track state of individual images. Move
the readonly and shared flags to the virStorageSource struct so that we
can keep them in a per-image basis.
For inactive domains, set both current and maximum memory
to the specified 'maximum memory' value.
This matches the behavior of QEMU driver's SetMaxMemory.
https://bugzilla.redhat.com/show_bug.cgi?id=1091132
We invoked virCgroupHasController twice for checking
VIR_CGROUP_CONTROLLER_DEVICES
in lxcDomainAttachDeviceDiskLive.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Replace:
if (virBufferError(&buf)) {
virBufferFreeAndReset(&buf);
virReportOOMError();
...
}
with:
if (virBufferCheckError(&buf) < 0)
...
This should not be a functional change (unless some callers
misused the virBuffer APIs - a different error would be reported
then)
So far, we only report an error if formatting the siblings bitmap
in NUMA topology fails.
Be consistent and always report error in virCapabilitiesFormatXML.
The comments for lxcDomainCreateXMLWithFiles are out of date. So update them.
And add comments for lxcDomainCreateXML
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Yue wenyuan <yuewenyuan@huawei.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Fix lxcDomainGetMemoryParameters and lxcDomainGetSchedulerParametersFlags:
virsh -c lxc:/// memtune DOMAIN
error: Unable to get number of memory parameters
error: unsupported flags (0x4) in function lxcDomainGetMemoryParameters
Introduced by commit 399394.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
For future work we want to get info for not only the free memory
but overall memory size too. That's why the function must have
new signature too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As part of the work on backing chains, I'm finding that it would
be easier to directly manipulate chains of pointers (adding a
snapshot merely adjusts pointers to form the correct list) rather
than copy data from one struct to another. This patch converts
domain disk source to be a pointer.
In this patch, the pointer is ALWAYS allocated (thanks in part to
the previous patch forwarding all disk def allocation through a
common point), and all other changse are just mechanical fallout of
the new type; there should be no functional change. It is possible
that we may want to leave the pointer NULL for a cdrom with no
medium in a later patch, but as that requires a closer audit of the
source to ensure we don't fault on a null dereference, I didn't do
it here.
* src/conf/domain_conf.h (_virDomainDiskDef): Change type of src.
* src/conf/domain_conf.c: Adjust all clients.
* src/security/security_selinux.c: Likewise.
* src/qemu/qemu_domain.c: Likewise.
* src/qemu/qemu_command.c: Likewise.
* src/qemu/qemu_conf.c: Likewise.
* src/qemu/qemu_process.c: Likewise.
* src/qemu/qemu_migration.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/lxc/lxc_controller.c: Likewise.
* tests/securityselinuxlabeltest.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
"Freezed" is not an English word.
* src/lxc/lxc_driver.c (lxcFreezeContainer): Fix typo.
* src/qemu/qemu_driver.c (qemuDomainSnapshotFSFreeze): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The LXC controller itself needs to mknod the USB device
node in /dev/bus/usb, so we can't block mknod permission
from the cgroup.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The check for a network being active during interface attach was being
done individually in several places (by both the lxc driver and the
qemu driver), but those places were too specific, leading to it *not*
being checked when allocating a connection/device from a macvtap or
hostdev network.
This patch puts a single check in networkAllocateActualDevice(), which
is always called before the any network interface is attached to any
type of domain. It also removes all the other now-redundant checks
from the lxc and qemu drivers.
NB: the following patches are prerequisites for this patch, in the
case that it is backported to any branch:
440beeb network: fix virNetworkObjAssignDef and persistence
8aaa5b6 network: create statedir during driver initialization
b9e9549 network: change location of network state xml files
411c548 network: set macvtap/hostdev networks active if their state
file exists
This fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=880483
Instead of hardcoding LIBEXECDIR as the location of the libvirt_lxc
binary set in the LXC driver capabilities, use virFileFindResource
to optionally find it in the current build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, virCgroupGetPercpuStats is only used by the LXC driver,
filling out the CPUTIME stats. qemuDomainGetPercpuStats does this
and also filles out VCPUTIME stats.
Extend virCgroupGetPercpuStats to also report VCPUTIME stats if
nvcpupids is non-zero. In the LXC driver, we don't have cpupids.
In the QEMU driver, there is at least one cpupid for a running domain,
so the behavior shouldn't change for QEMU either.
Also rename getSumVcpuPercpuStats to virCgroupGetPercpuVcpuSum.
Commit b9dd878f (util: make it easier to grab only regular command exit)
changed the call semantics of virCommandRun() and therefore of virRun()
too. But lxcCheckNetNsSupport() was not updated.
As consequence of this lxcCheckNetNsSupport always failed and broke LXC.
Signed-off-by: Richard Weinberger <richard@nod.at>
Now that we ditched our custom pthread impl for Win32, we can
use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids
the need to use a virOnce one-time global initializer in a
number of places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since it is an abbreviation, USB should always be fully
capitalized or full lower case, never Usb.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Every caller checked the return value and logged an error
- one if no device with the specified MAC was found,
other if there were multiple devices matching the MAC address
(except for qemuDomainUpdateDeviceConfig which logged the same
message in both cases).
Move the error reporting into virDomainNetFindIdx, since in both cases,
we couldn't find one single match - it's just the error messages that
differ.
Currently, the Linux kernel treats values of '0' and '1' as
the minimum of 2. Values larger than the maximum are changed
to the maximum.
Re-reading the shares value after setting it reflects this in
the live domain XML.
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.
Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
It's finally time to start tracking disk backing chains in
<domain> XML. The first step is to start refactoring code
so that we have an object more convenient for representing
each host source resource in the context of a single guest
<disk>. Ultimately, I plan to move the new type into src/util
where it can be reused by virStorageFile, but to make the
transition easier to review, this patch just creates the
new type then fixes everything until it compiles again.
* src/conf/domain_conf.h (_virDomainDiskDef): Split...
(_virDomainDiskSourceDef): ...to new struct.
(virDomainDiskAuthClear): Use new type.
* src/conf/domain_conf.c (virDomainDiskDefFree): Split...
(virDomainDiskSourceDefClear): ...to new function.
(virDomainDiskGetType, virDomainDiskSetType)
(virDomainDiskGetSource, virDomainDiskSetSource)
(virDomainDiskGetDriver, virDomainDiskSetDriver)
(virDomainDiskGetFormat, virDomainDiskSetFormat)
(virDomainDiskAuthClear, virDomainDiskGetActualType)
(virDomainDiskDefParseXML, virDomainDiskSourceDefFormat)
(virDomainDiskDefFormat, virDomainDiskDefForeachPath)
(virDomainDiskDefGetSecurityLabelDef)
(virDomainDiskSourceIsBlockType): Adjust all users.
* src/lxc/lxc_controller.c (virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceMknodHelper):
Likewise.
* src/qemu/qemu_command.c (qemuAddRBDHost, qemuParseRBDString)
(qemuParseDriveURIString, qemuParseGlusterString)
(qemuParseISCSIString, qemuParseNBDString)
(qemuDomainDiskGetSourceString, qemuBuildDriveStr)
(qemuBuildCommandLine, qemuParseCommandLineDisk)
(qemuParseCommandLine): Likewise.
* src/qemu/qemu_conf.c (qemuCheckSharedDevice)
(qemuAddISCSIPoolSourceHost, qemuTranslateDiskSourcePool):
Likewise.
* src/qemu/qemu_driver.c (qemuDomainUpdateDeviceConfig)
(qemuDomainPrepareDiskChainElement)
(qemuDomainSnapshotCreateInactiveExternal)
(qemuDomainSnapshotPrepareDiskExternalBackingInactive)
(qemuDomainSnapshotPrepareDiskInternal)
(qemuDomainSnapshotPrepare)
(qemuDomainSnapshotCreateSingleDiskActive)
(qemuDomainSnapshotUndoSingleDiskActive)
(qemuDomainBlockPivot, qemuDomainBlockJobImpl)
(qemuDomainBlockCopy, qemuDomainBlockCommit): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/qemu/qemu_process.c (qemuProcessGetVolumeQcowPassphrase)
(qemuProcessInitPasswords): Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/storage/storage_driver.c (virStorageFileInitFromDiskDef):
Likewise.
* tests/securityselinuxlabeltest.c (testSELinuxLoadDef):
Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Part of a series of cleanups to use new accessor methods.
* src/lxc/lxc_cgroup.c (virLXCCgroupSetupDeviceACL): Use
accessors.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDeviceDisk)
(virLXCControllerSetupNBDDeviceDisk)
(virLXCControllerSetupLoopDevices, virLXCControllerSetupDisk):
Likewise.
* src/lxc/lxc_driver.c (lxcDomainAttachDeviceDiskLive)
(lxcDomainDetachDeviceDiskLive): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
When checking compatibility of a device with a domain definition, we
should know what we're going to do with the device. Because we may need
to check for different things when we're attaching a new device versus
detaching an existing device.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
A device needs to be checked for compatibility with the domain
definition it corresponds to. Specifically, for VIR_DOMAIN_AFFECT_CONFIG
case we should check against persistent def rather than active def.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Coverity found an issue in lxc_driver and uml_driver that we don't
check the return value of register functions.
I've also updated all other places and unify the way we check the
return value.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Many of the domain xml format functions (including all of the device
format functions) had hard-coded spaces, which made for incorrect
indentation when those functions were called in a different context
(for example, commit 2122cf39 added <interface> XML into the document
provided to a network hook script, and in this case it should have
been indented by 2 spaces, but was instead indented by 6 spaces).
To make it possible to insert a properly indented device anywhere into
an XML document, this patch removes hardcoded spaces from the
formatting functions, and calls virBufferAdjustIndent() at appropriate
places instead. (a regex search of domain_conf.c was done to assure
that all occurrences of hardcoded spaces were removed).
virDomainDiskSourceDefFormatInternal() is also called from
snapshot_conf.c, so two virBufferAdjustIndent() calls were temporarily
added around that call - those functions will have hardcoded spaces
removed in a separate patch.
This could cause some conflicts when backporting future changes to the
formatting functions to older branches, but fortunately the changes
are almost all trivial, so conflict resolution will be obvious.
Change any variable names with Usb, Pci or Scsi to use
USB, PCI and SCSI since they are abbreviations.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Auditing all callers of virCommandRun and virCommandWait that
passed a non-NULL pointer for exit status turned up some
interesting observations. Many callers were merely passing
a pointer to avoid the overall command dying, but without
caring what the exit status was - but these callers would
be better off treating a child death by signal as an abnormal
exit. Other callers were actually acting on the status, but
not all of them remembered to filter by WIFEXITED and convert
with WEXITSTATUS; depending on the platform, this can result
in a status being reported as 256 times too big. And among
those that correctly parse the output, it gets rather verbose.
Finally, there were the callers that explicitly checked that
the status was 0, and gave their own message, but with fewer
details than what virCommand gives for free.
So the best idea is to move the complexity out of callers and
into virCommand - by default, we return the actual exit status
already cleaned through WEXITSTATUS and treat signals as a
failed command; but the few callers that care can ask for raw
status and act on it themselves.
* src/util/vircommand.h (virCommandRawStatus): New prototype.
* src/libvirt_private.syms (util/command.h): Export it.
* docs/internals/command.html.in: Document it.
* src/util/vircommand.c (virCommandRawStatus): New function.
(virCommandWait): Adjust semantics.
* tests/commandtest.c (test1): Test it.
* daemon/remote.c (remoteDispatchAuthPolkit): Adjust callers.
* src/access/viraccessdriverpolkit.c (virAccessDriverPolkitCheck):
Likewise.
* src/fdstream.c (virFDStreamCloseInt): Likewise.
* src/lxc/lxc_process.c (virLXCProcessStart): Likewise.
* src/qemu/qemu_command.c (qemuCreateInBridgePortWithHelper):
Likewise.
* src/xen/xen_driver.c (xenUnifiedXendProbe): Simplify.
* tests/reconnect.c (mymain): Likewise.
* tests/statstest.c (mymain): Likewise.
* src/bhyve/bhyve_process.c (virBhyveProcessStart)
(virBhyveProcessStop): Don't overwrite virCommand error.
* src/libvirt.c (virConnectAuthGainPolkit): Likewise.
* src/openvz/openvz_driver.c (openvzDomainGetBarrierLimit)
(openvzDomainSetBarrierLimit): Likewise.
* src/util/virebtables.c (virEbTablesOnceInit): Likewise.
* src/util/viriptables.c (virIpTablesOnceInit): Likewise.
* src/util/virnetdevveth.c (virNetDevVethCreate): Fix debug
message.
* src/qemu/qemu_capabilities.c (virQEMUCapsInitQMP): Add comment.
* src/storage/storage_backend_iscsi.c
(virStorageBackendISCSINodeUpdate): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Right now, a caller waiting for a child process either requires
the child to have status 0, or must use WIFEXITED() and friends
itself. But in many cases, we want the middle ground of treating
fatal signals as an error, and directly accessing the normal exit
value without having to use WEXITSTATUS(), in order to easily
detect an expected non-zero exit status. This adds the middle
ground to the low-level virProcessWait; the next patch will add
it to virCommand.
* src/util/virprocess.h (virProcessWait): Alter signature.
* src/util/virprocess.c (virProcessWait): Add parameter.
(virProcessRunInMountNamespace): Adjust caller.
* src/util/vircommand.c (virCommandWait): Likewise.
* src/util/virfile.c (virFileAccessibleAs): Likewise.
* src/lxc/lxc_container.c (lxcContainerHasReboot)
(lxcContainerAvailable): Likewise.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* tools/virt-login-shell.c (main): Likewise.
* tools/virsh-domain.c (cmdLxcEnterNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* tests/commandtest.c (test23): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
This function is needed for user namespaces, where we need to chmod()
the cgroup to the initial uid/gid such that systemd is allowed to
use the cgroup.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.
While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupXXX APIs' return value must be checked for
being less than 0, not equal to 0.
An VIR_ERR_OPERATION_INVALID error must also be raised
when the VM is not running to prevent a crash on NULL
priv->cgroup field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Destroying a suspended domain needs special action.
We cannot simply terminate all process because they are frozen.
Do deal with that we send them SIGKILL and thaw them.
Upon wakeup the process sees the pending signal and dies immediately.
Signed-off-by: Richard Weinberger <richard@nod.at>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite multiple hotunplug functions to to use the
virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with an absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevMiscLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevStorageLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevSubsysUSBLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceDiskLive function to use the
virProcessRunInMountNamespace helper. This avoids risk of
a malicious guest replacing /dev with a absolute symlink,
tricking the driver into changing the host OS filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use helper virProcessRunInMountNamespace in lxcDomainShutdownFlags and
lxcDomainReboot. Otherwise, a malicious guest could use symlinks
to force the host to manipulate the wrong file in the host's namespace.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Eric Blake <eblake@redhat.com>
The check for whether the cgroup devices ACL is available is
done quite late during LXC hotplug - in fact after the device
node is already created in the container in some cases. Better
to do it upfront so we fail immediately.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC disk hotplug code was allowing block or character devices
to be given as disk. A disk is always a block device.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When detaching a USB device from an LXC guest we must remove
the device from the cgroup ACL. Unfortunately we were telling
the cgroup code to use the guest /dev path, not the host /dev
path, and the guest device node had already been unlinked.
This was, however, fortunate since the code passed &priv->cgroup
instead of priv->cgroup, so would have crash if the device node
were accessible.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
After hotplugging a USB device, the LXC driver forgot
to add the device def to the virDomainDefPtr.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC code missed the 'usb' component out of the path
/dev/bus/usb/$BUSNUM/$DEVNUM, so it failed to actually
setup cgroups for the device. This was in fact lucky
because the call to virLXCSetupHostUsbDeviceCgroup
was also mistakenly passing '&priv->cgroup' instead of
just 'priv->cgroup'. So once the path is fixed, libvirtd
would then crash trying to access the bogus virCgroupPtr
pointer. This would have been a security issue, were it
not for the bogus path preventing the pointer reference
being reached.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The problem with VLAN is that the user still has to manually create the
vlan interface on the host. Then the generated configuration will use
it as a nerwork hostdev device. So the generated configurations of the
following two fragments are equivalent (see rhbz#1059637).
lxc.network.type = phys
lxc.network.link = eth0.5
lxc.network.type = vlan
lxc.network.link = eth0
lxc.network.vlan.id = 5
Some of the LXC configuration properties aren't migrated since they
would only cause problems in libvirt-lxc:
* lxc.network.ipv[46]: LXC driver doesn't setup IP address of guests,
see rhbz#1059624
* lxc.network.name, see rhbz#1059630
If no network configuration is provided, LXC only provides the loopback
interface. To match this, we need to use the privnet feature. LXC will
also define a 'none' network type in its 1.0.0 version that fits
libvirt LXC driver's default.
LXC rootfs can be either a directory or a block device or an image
file. The first two types have been implemented, but the image file is
still to be done since LXC auto-guesses the file format at mount time
and the LXC driver doesn't support the 'auto' format.
This function aims at converting LXC configuration into a libvirt
domain XML description to help users migrate from LXC to libvirt.
Here is an example of how the lxc configuration works:
virsh -c lxc:/// domxml-from-native lxc-tools /var/lib/lxc/migrate_test/config
It is possible that some parts couldn't be properly mapped into a
domain XML fragment, so users should carefully review the result
before creating the domain.
fstab files in lxc.mount lines will need to be merged into the
configuration file as lxc.mount.entry.
As we can't know the amount of memory of the host, we have to set a
default value for max_balloon that users will probably want to adjust.
https://bugzilla.redhat.com/show_bug.cgi?id=1058839
Commit f9f56340 for CVE-2014-0028 almost had the right idea - we
need to check the ACL rules to filter which events to send. But
it overlooked one thing: the event dispatch queue is running in
the main loop thread, and therefore does not normally have a
current virIdentityPtr. But filter checks can be based on current
identity, so when libvirtd.conf contains access_drivers=["polkit"],
we ended up rejecting access for EVERY event due to failure to
look up the current identity, even if it should have been allowed.
Furthermore, even for events that are triggered by API calls, it
is important to remember that the point of events is that they can
be copied across multiple connections, which may have separate
identities and permissions. So even if events were dispatched
from a context where we have an identity, we must change to the
correct identity of the connection that will be receiving the
event, rather than basing a decision on the context that triggered
the event, when deciding whether to filter an event to a
particular connection.
If there were an easy way to get from virConnectPtr to the
appropriate virIdentityPtr, then object_event.c could adjust the
identity prior to checking whether to dispatch an event. But
setting up that back-reference is a bit invasive. Instead, it
is easier to delay the filtering check until lower down the
stack, at the point where we have direct access to the RPC
client object that owns an identity. As such, this patch ends
up reverting a large portion of the framework of commit f9f56340.
We also have to teach 'make check' to special-case the fact that
the event registration filtering is done at the point of dispatch,
rather than the point of registration. Note that even though we
don't actually use virConnectDomainEventRegisterCheckACL (because
the RegisterAny variant is sufficient), we still generate the
function for the purposes of documenting that the filtering
takes place.
Also note that I did not entirely delete the notion of a filter
from object_event.c; I still plan on using that for my upcoming
patch series for qemu monitor events in libvirt-qemu.so. In
other words, while this patch changes ACL filtering to live in
remote.c and therefore we have no current client of the filtering
in object_event.c, the notion of filtering in object_event.c is
still useful down the road.
* src/check-aclrules.pl: Exempt event registration from having to
pass checkACL filter down call stack.
* daemon/remote.c (remoteRelayDomainEventCheckACL)
(remoteRelayNetworkEventCheckACL): New functions.
(remoteRelay*Event*): Use new functions.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Drop unused parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/domain_event.c (virDomainEventFilter): Delete unused
function.
* src/conf/network_event.c (virNetworkEventFilter): Likewise.
* src/libxl/libxl_driver.c: Adjust caller.
* src/lxc/lxc_driver.c: Likewise.
* src/network/bridge_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/vbox/vbox_tmpl.c: Likewise.
* src/xen/xen_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Coverity complains about default: label in libxl_driver.c not be able
to be reached. It's by design for the code and since it's not necessary
in the code nor does it elicit any compiler/make check warnings - just
remove it rather than adding a coverity[dead_error_begin] tag.
While I'm at it, lxc_driver.c and nodeinfo.c have the same design, so I
removed the default labels and the existing coverity tags.
The NWFilter code has as a deadlock race condition between
the virNWFilter{Define,Undefine} APIs and starting of guest
VMs due to mis-matched lock ordering.
In the virNWFilter{Define,Undefine} codepaths the lock ordering
is
1. nwfilter driver lock
2. virt driver lock
3. nwfilter update lock
4. domain object lock
In the VM guest startup paths the lock ordering is
1. virt driver lock
2. domain object lock
3. nwfilter update lock
As can be seen the domain object and nwfilter update locks are
not acquired in a consistent order.
The fix used is to push the nwfilter update lock upto the top
level resulting in a lock ordering for virNWFilter{Define,Undefine}
of
1. nwfilter driver lock
2. nwfilter update lock
3. virt driver lock
4. domain object lock
and VM start using
1. nwfilter update lock
2. virt driver lock
3. domain object lock
This has the effect of serializing VM startup once again, even if
no nwfilters are applied to the guest. There is also the possibility
of deadlock due to a call graph loop via virNWFilterInstantiate
and virNWFilterInstantiateFilterLate.
These two problems mean the lock must be turned into a read/write
lock instead of a plain mutex at the same time. The lock is used to
serialize changes to the "driver->nwfilters" hash, so the write lock
only needs to be held by the define/undefine methods. All other
methods can rely on a read lock which allows good concurrency.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I noticed that we allow virDomainGetVcpusFlags even for read-only
connections, but that with a flag, it can require guest agent
interaction. It is feasible that a malicious guest could
intentionally abuse the replies it sends over the guest agent
connection to possibly trigger a bug in libvirt's JSON parser,
or withhold an answer so as to prevent the use of the agent
in a later command such as a shutdown request. Although we
don't know of any such exploits now (and therefore don't mind
posting this patch publicly without trying to get a CVE assigned),
it is better to err on the side of caution and explicitly require
full access to any domain where the API requires guest interaction
to operate correctly.
I audited all commands that are marked as conditionally using a
guest agent. Note that at least virDomainFSTrim is documented
as needing a guest agent, but that such use is unconditional
depending on the hypervisor (so the existing domain:fs_trim ACL
should be sufficient there, rather than also requirng domain:write).
But when designing future APIs, such as the plans for obtaining
a domain's IP addresses, we should copy the approach of this patch
in making interaction with the guest be specified via a flag, and
use that flag to also require stricter access checks.
* src/libvirt.c (virDomainGetVcpusFlags): Forbid guest interaction
on read-only connection.
(virDomainShutdownFlags, virDomainReboot): Improve docs on agent
interaction.
* src/remote/remote_protocol.x
(REMOTE_PROC_DOMAIN_SNAPSHOT_CREATE_XML)
(REMOTE_PROC_DOMAIN_SET_VCPUS_FLAGS)
(REMOTE_PROC_DOMAIN_GET_VCPUS_FLAGS, REMOTE_PROC_DOMAIN_REBOOT)
(REMOTE_PROC_DOMAIN_SHUTDOWN_FLAGS): Require domain:write for any
conditional use of a guest agent.
* src/xen/xen_driver.c: Fix clients.
* src/libxl/libxl_driver.c: Likewise.
* src/uml/uml_driver.c: Likewise.
* src/qemu/qemu_driver.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
With this patch,user can set throttle blkio cgroup for
lxc domain through virsh tool.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
This patch introduces virCgroupSetBlkioDeviceReadIops,
virCgroupSetBlkioDeviceWriteIops,
virCgroupSetBlkioDeviceReadBps and
virCgroupSetBlkioDeviceWriteBps,
we can use these interfaces to set up throttle
blkio cgroup for domain.
This patch also adds the new throttle blkio cgroup
elements to the test xml.
Signed-off-by: Guan Qiang <hzguanqiang@corp.netease.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The public virConnectRef and virConnectClose API are just thin
wrappers around virObjectRef/virObjectRef, with added object
validation and an error reset. Within our backend drivers, use
of the object validation is just an inefficiency since we always
pass valid objects. More important to think about is what
happens with the error reset; our uses of virConnectRef happened
to be safe (since we hadn't encountered any earlier errors), but
in several cases the use of virConnectClose could lose a real
error.
Ideally, we should also avoid calling virConnectOpen() from
within backend drivers - but that is a known situation that
needs much more design work.
* src/qemu/qemu_process.c (qemuProcessReconnectHelper)
(qemuProcessReconnect): Avoid nested public API call.
* src/qemu/qemu_driver.c (qemuAutostartDomains)
(qemuStateInitialize, qemuStateStop): Likewise.
* src/qemu/qemu_migration.c (doPeer2PeerMigrate): Likewise.
* src/storage/storage_driver.c (storageDriverAutostart):
Likewise.
* src/uml/uml_driver.c (umlAutostartConfigs): Likewise.
* src/lxc/lxc_process.c (virLXCProcessAutostartAll): Likewise.
(virLXCProcessReboot): Likewise, and avoid leaking conn on error.
Signed-off-by: Eric Blake <eblake@redhat.com>
Ever since ACL filtering was added in commit 7639736 (v1.1.1), a
user could still use event registration to obtain access to a
domain that they could not normally access via virDomainLookup*
or virConnectListAllDomains and friends. We already have the
framework in the RPC generator for creating the filter, and
previous cleanup patches got us to the point that we can now
wire the filter through the entire object event stack.
Furthermore, whether or not domain:getattr is honored, use of
global events is a form of obtaining a list of networks, which
is covered by connect:search_domains added in a93cd08 (v1.1.0).
Ideally, we'd have a way to enforce connect:search_domains when
doing global registrations while omitting that check on a
per-domain registration. But this patch just unconditionally
requires connect:search_domains, even when no list could be
obtained, based on the following observations:
1. Administrators are unlikely to grant domain:getattr for one
or all domains while still denying connect:search_domains - a
user that is able to manage domains will want to be able to
manage them efficiently, but efficient management includes being
able to list the domains they can access. The idea of denying
connect:search_domains while still granting access to individual
domains is therefore not adding any real security, but just
serves as a layer of obscurity to annoy the end user.
2. In the current implementation, domain events are filtered
on the client; the server has no idea if a domain filter was
requested, and must therefore assume that all domain event
requests are global. Even if we fix the RPC protocol to
allow for server-side filtering for newer client/server combos,
making the connect:serach_domains ACL check conditional on
whether the domain argument was NULL won't benefit older clients.
Therefore, we choose to document that connect:search_domains
is a pre-requisite to any domain event management.
Network events need the same treatment, with the obvious
change of using connect:search_networks and network:getattr.
* src/access/viraccessperm.h
(VIR_ACCESS_PERM_CONNECT_SEARCH_DOMAINS)
(VIR_ACCESS_PERM_CONNECT_SEARCH_NETWORKS): Document additional
effect of the permission.
* src/conf/domain_event.h (virDomainEventStateRegister)
(virDomainEventStateRegisterID): Add new parameter.
* src/conf/network_event.h (virNetworkEventStateRegisterID):
Likewise.
* src/conf/object_event_private.h (virObjectEventStateRegisterID):
Likewise.
* src/conf/object_event.c (_virObjectEventCallback): Track a filter.
(virObjectEventDispatchMatchCallback): Use filter.
(virObjectEventCallbackListAddID): Register filter.
* src/conf/domain_event.c (virDomainEventFilter): New function.
(virDomainEventStateRegister, virDomainEventStateRegisterID):
Adjust callers.
* src/conf/network_event.c (virNetworkEventFilter): New function.
(virNetworkEventStateRegisterID): Adjust caller.
* src/remote/remote_protocol.x
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER)
(REMOTE_PROC_CONNECT_DOMAIN_EVENT_REGISTER_ANY)
(REMOTE_PROC_CONNECT_NETWORK_EVENT_REGISTER_ANY): Generate a
filter, and require connect:search_domains instead of weaker
connect:read.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventRegisterAny)
(testConnectNetworkEventRegisterAny): Update callers.
* src/remote/remote_driver.c (remoteConnectDomainEventRegister)
(remoteConnectDomainEventRegisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventRegisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventRegisterAny): Likewise.
* src/qemu/qemu_driver.c (qemuConnectDomainEventRegister)
(qemuConnectDomainEventRegisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventRegisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventRegisterAny): Likewise.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventRegisterAny): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
the unix socket /var/run/libvirt/lxc/domain.sock is not created
under the selinux context which configured by <seclabel>.
If we try to connect the domain.sock under the selinux context
of domain in virtLXCProcessConnectMonitor,selinux will deny
this connect operation.
type=AVC msg=audit(1387953696.067:662): avc: denied { connectto } for pid=21206 comm="libvirtd" path="/usr/local/var/run/libvirt/lxc/systemd.sock" scontext=unconfined_u:system_r:svirt_lxc_net_t:s0:c770,c848 tcontext=unconfined_u:system_r:unconfined_t:s0-s0:c0.c1023 tclass=unix_stream_socket
fix this problem by creating socket under selinux context of domain.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
The @name variable is VIR_STRDUP()-ed into, but never freed. In fact,
there's no need to duplicate a command line argument since all places
where @name is used expect const char.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Ever since their introduction (commit 1509b80 in v0.5.0 for
virConnectDomainEventRegister, commit 4445723 in v0.8.0 for
virConnectDomainEventDeregisterAny), the event deregistration
functions have been documented as returning 0 on success;
likewise for older registration (only the newer RegisterAny
must return a non-zero callbackID). And now that we are
adding virConnectNetworkEventDeregisterAny for v1.2.1, it
should have the same semantics.
Fortunately, all of the stateful drivers have been obeying
the docs and returning 0, thanks to the way the remote_driver
tracks things (in fact, the RPC wire protocol is unable to
send a return value for DomainEventRegisterAny, at least not
without adding a new RPC number). Well, except for vbox,
which was always failing deregistration, due to failure to
set the return value to anything besides its initial -1.
But for local drivers, such as test:///default, we've been
returning non-zero numbers; worse, the non-zero numbers have
differed over time. For example, in Fedora 12 (libvirt 0.8.2),
calling Register twice would return 0 and 1 [the callbackID
generated under the hood]; while in Fedora 20 (libvirt 1.1.3),
it returns 1 and 2 [the number of callbacks registered for
that event type]. Since we have changed the behavior over
time, and since it differs by local vs. remote, we can safely
argue that no one could have been reasonably relying on any
particular behavior, so we might as well obey the docs, as well
as prepare callers that might deal with older clients to not be
surprised if the docs are not strictly followed.
For consistency, this patch fixes the code for all drivers,
even though it only makes an impact for vbox and for local
drivers. By fixing all drivers, future copy and paste from
a remote driver to a local driver is less likely to
reintroduce the bug.
Finally, update the testsuite to gain some coverage of the
issue for local drivers, including the first test of old-style
domain event registration via function pointer instead of
event id.
* src/libvirt.c (virConnectDomainEventRegister)
(virConnectDomainEventDeregister)
(virConnectDomainEventDeregisterAny): Clarify docs.
* src/libxl/libxl_driver.c (libxlConnectDomainEventRegister)
(libxlConnectDomainEventDeregister)
(libxlConnectDomainEventDeregisterAny): Match documentation.
* src/lxc/lxc_driver.c (lxcConnectDomainEventRegister)
(lxcConnectDomainEventDeregister)
(lxcConnectDomainEventDeregisterAny): Likewise.
* src/test/test_driver.c (testConnectDomainEventRegister)
(testConnectDomainEventDeregister)
(testConnectDomainEventDeregisterAny)
(testConnectNetworkEventDeregisterAny): Likewise.
* src/uml/uml_driver.c (umlConnectDomainEventRegister)
(umlConnectDomainEventDeregister)
(umlConnectDomainEventDeregisterAny): Likewise.
* src/vbox/vbox_tmpl.c (vboxConnectDomainEventRegister)
(vboxConnectDomainEventDeregister)
(vboxConnectDomainEventDeregisterAny): Likewise.
* src/xen/xen_driver.c (xenUnifiedConnectDomainEventRegister)
(xenUnifiedConnectDomainEventDeregister)
(xenUnifiedConnectDomainEventDeregisterAny): Likewise.
* src/network/bridge_driver.c
(networkConnectNetworkEventDeregisterAny): Likewise.
* tests/objecteventtest.c (testDomainCreateXMLOld): New test.
(mymain): Run it.
(testDomainCreateXML): Check return values.
Signed-off-by: Eric Blake <eblake@redhat.com>
The libvirt_internal.h header was included by the internal.h header.
This made it painful to add new stuff to the header file that would
require some more specific types. Remove inclusion by internal.h and add
it to appropriate places manually.
This reverts commit aa4619337c.
This patch was accidentally pushed prematurely, and has incorrect
logic for which shutdown methods to attempt.
Signed-off-by: Eric Blake <eblake@redhat.com>
We weren't very consistent in our use of VIR_ERR_NO_SUPPORT; many
users just passed __FUNCTION__ on, while others passed "%s" to
silence over-eager compilers that warn about __FUNCTION__ not
containing any %. It's nicer to route all these uses through
a single macro, so that if we ever need to change the reporting,
we can do it in one place.
I verified that 'virsh -c test:///default qemu-monitor-command test foo'
gives the same error message before and after this patch:
error: this function is not supported by the connection driver: virDomainQemuMonitorCommand
Note that in libvirt.c, we were inconsistent on whether virDomain*
API used virLibConnError() (with VIR_FROM_NONE) or virLibDomainError()
(with VIR_FROM_DOMAIN); this patch unifies these errors to all use
VIR_FROM_NONE, on the grounds that it is unlikely that a caller
learning that a call is unimplemented can do anything in particular
with extra knowledge of which error domain it belongs to.
One particular change to note is virDomainOpenGraphics which was
trying to fail with VIR_ERR_NO_SUPPORT after a failed
VIR_DRV_SUPPORTS_FEATURE check; all other places that fail a
feature check report VIR_ERR_ARGUMENT_UNSUPPORTED.
* src/util/virerror.h (virReportUnsupportedError): New macro.
* src/libvirt-qemu.c: Use new macro.
* src/libvirt-lxc.c: Likewise.
* src/lxc/lxc_driver.c: Likewise.
* src/security/security_manager.c: Likewise.
* src/util/virinitctl.c: Likewise.
* src/libvirt.c: Likewise.
(virDomainOpenGraphics): Use correct error for unsupported feature.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, the @flags usage is a bit unclear at first sight to say the
least. There's no need for such unclear code especially when we can
borrow the working code from qemuDomainShutdownFlags().
In addition, this fixes one bug too. If user requested both
VIR_DOMAIN_SHUTDOWN_INITCTL and VIR_DOMAIN_SHUTDOWN_SIGNAL at the same
time, he is basically saying: 'Use the force Luke! If initctl fails try
sending a signal.' But with the current code we don't do that. If
initctl fails for some reason (e.g. inability to write to /dev/initctl)
we don't try sending any signal but fail immediately. To make things
worse, making a domain shutdown with bare _SIGNAL was working by blind
chance of a @rc variable being placed at correct place on the stack so
its initial value was zero.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain> --hard-limit 133T'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 26826)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf718) at util/vircgroup.c:1764
#1 0x00007ffff70e9206 in virCgroupSetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffe409f360 "1073741824")
at util/vircgroup.c:669
#2 0x00007ffff70e98b4 in virCgroupSetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=1073741824) at util/vircgroup.c:740
#3 0x00007ffff70ee518 in virCgroupSetMemory (group=0x0, kb=1048576) at util/vircgroup.c:1904
#4 0x00007ffff70ee675 in virCgroupSetMemoryHardLimit (group=0x0, kb=1048576)
at util/vircgroup.c:1944
#5 0x00005555557d54c8 in lxcDomainSetMemoryParameters (dom=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at lxc/lxc_driver.c:774
#6 0x00007ffff72c20f9 in virDomainSetMemoryParameters (domain=0x7fffe40cc420,
params=0x7fffe409f100, nparams=1, flags=0) at libvirt.c:4051
#7 0x000055555561365f in remoteDispatchDomainSetMemoryParameters (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510)
at remote_dispatch.h:7621
#8 0x00005555556133fd in remoteDispatchDomainSetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ec4b10, msg=0x555555eb94e0, rerr=0x7fffec8bfb70, args=0x7fffe40b8510,
ret=0x7fffe40b84f0) at remote_dispatch.h:7591
#9 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:435
#10 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ec4b10, msg=0x555555eb94e0)
at rpc/virnetserverprogram.c:305
#11 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ec4b10,
prog=0x555555ec3ae0, msg=0x555555eb94e0) at rpc/virnetserver.c:165
#12 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ec3e30, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#13 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#14 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#15 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#16 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The function doesn't check whether the request is made for active or
inactive domain. Thus when the domain is not running it still tries
accessing non-existing cgroups (priv->cgroup, which is NULL).
I re-made the function in order for it to work the same way it's qemu
counterpart does.
Reproducer:
1) Define an LXC domain
2) Do 'virsh memtune <domain>'
Backtrace:
Thread 6 (Thread 0x7fffec8c0700 (LWP 13387)):
#0 0x00007ffff70edcc4 in virCgroupPathOfController (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", path=0x7fffec8bf750) at util/vircgroup.c:1764
#1 0x00007ffff70e958c in virCgroupGetValueStr (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf7c0) at util/vircgroup.c:705
#2 0x00007ffff70e9d29 in virCgroupGetValueU64 (group=0x0, controller=3,
key=0x7ffff75734bd "memory.limit_in_bytes", value=0x7fffec8bf810) at util/vircgroup.c:804
#3 0x00007ffff70ee706 in virCgroupGetMemoryHardLimit (group=0x0, kb=0x7fffec8bf8a8)
at util/vircgroup.c:1962
#4 0x00005555557d590f in lxcDomainGetMemoryParameters (dom=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at lxc/lxc_driver.c:826
#5 0x00007ffff72c28d3 in virDomainGetMemoryParameters (domain=0x7fffd40024a0,
params=0x7fffd40027a0, nparams=0x7fffec8bfa24, flags=0) at libvirt.c:4137
#6 0x000055555563714d in remoteDispatchDomainGetMemoryParameters (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote.c:1895
#7 0x00005555556052c4 in remoteDispatchDomainGetMemoryParametersHelper (server=0x555555eb7e00,
client=0x555555ebaef0, msg=0x555555ebb3e0, rerr=0x7fffec8bfb70, args=0x7fffd40024e0,
ret=0x7fffd4002420) at remote_dispatch.h:4050
#8 0x00007ffff73b293f in virNetServerProgramDispatchCall (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:435
#9 0x00007ffff73b207f in virNetServerProgramDispatch (prog=0x555555ec3ae0,
server=0x555555eb7e00, client=0x555555ebaef0, msg=0x555555ebb3e0)
at rpc/virnetserverprogram.c:305
#10 0x00007ffff73a4d2c in virNetServerProcessMsg (srv=0x555555eb7e00, client=0x555555ebaef0,
prog=0x555555ec3ae0, msg=0x555555ebb3e0) at rpc/virnetserver.c:165
#11 0x00007ffff73a4e8d in virNetServerHandleJob (jobOpaque=0x555555ebc7e0, opaque=0x555555eb7e00)
at rpc/virnetserver.c:186
#12 0x00007ffff7187f3f in virThreadPoolWorker (opaque=0x555555eb7ac0) at util/virthreadpool.c:144
#13 0x00007ffff718733a in virThreadHelper (data=0x555555eb7890) at util/virthreadpthread.c:161
#14 0x00007ffff468ed89 in start_thread (arg=0x7fffec8c0700) at pthread_create.c:308
#15 0x00007ffff3da26bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:113
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Systemd specified that any /dev/pts/NNN device on which it
is expected to spawn a agetty login, should be listed in
the 'container_ttys' env variable. It should just contain
the relative paths, eg 'pts/0' not '/dev/pts/0' and should
be space separated.
http://cgit.freedesktop.org/systemd/systemd/commit/?id=1d97ff7dd71902a5604c2fed8964925d54e09de9
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently, if virFileMakePath() fails, the @ret is left initialized from
virAsprintf() just a few lines above leading to a wrong return value of
zero whereas -1 should be returned.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When setting up filesystems backed by block devices or file
images, the SELinux mount options must be used to ensure the
correct context is set
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the code for lxcContainerGetSubtree into the virfile
module creating 2 new functions
int virFileGetMountSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
int virFileGetMountReverseSubtree(const char *mtabpath,
const char *prefix,
char ***mountsret,
size_t *nmountsret);
Add a new virfiletest.c test case to validate the new code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Also after commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to umount the mounts that
inherited from parent mountns.
right now, I have no good idea to fix this problem, we need
to do more research. this patch just skip unmounting these
mounts for shared root.
BTW, I think when libvirt lxc enables user namespace, the
configuation that shares root with host is very rara.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
After kernel commit 5ff9d8a65ce80efb509ce4e8051394e9ed2cd942
vfs: Lock in place mounts from more privileged users,
unprivileged user has no rights to move the mounts that
inherited from parent mountns. we use this feature to move
the /stateDir/domain-name.{dev, devpts} to the /dev/ and
/dev/pts directroy of container. this commit breaks libvirt lxc.
this patch changes the behavior to bind these mounts when
user namespace is enabled and move these mounts when user
namespace is disabled.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/lxc/lxc_container.c: Consistently use commas.
* src/openvz/openvz_driver.c: Likewise.
* src/openvz/openvz_util.c: Likewise.
* src/remote/remote_driver.c: Likewise.
* src/test/test_driver.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Without a 'return 0' in the stub lxcStartFuse() method, the
compiler warns:
lxc/lxc_fuse.c:374: error: control reaches end of non-void function
[-Wreturn-type]
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The glibc setxid is supposed to be async signal safe, but
libc developers confirm that it is not. This causes a problem
when libvirt_lxc starts the FUSE thread and then runs clone()
to start the container. If the clone() was done before the
FUSE thread has completely started up, then the container
will hang in setxid after clone().
The fix is to avoid creating any threads until after the
container has been clone()'d. By avoiding any threads in
the parent, the child is no longer required to run in an
async signal safe context, and we thus avoid the glibc
bug.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the host side of an LXC container console disconnected
and the guest side continued to write data, until the PTY
buffer filled up, the LXC controller would busy wait. It
would repeatedly see POLLHUP from poll() and not disable
the watch.
This was due to some bogus logic detecting blocking
conditions. Upon seeing a POLLHUP we must disable all
reading & writing from the PTY, and setup the epoll to
wake us up again when the connection comes back.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently we were storing domain feature flags in a bit field as the
they were either enabled or disabled. New features such as paravirtual
spinlocks however can be tri-state as the default option may depend on
hypervisor version.
To allow storing tri-state feature state in the same place instead of
having to declare dedicated variables for each feature this patch
refactors the bit field to an array.
Currently the LXC container tries to skip selinux/securityfs
mounts if the directory does not exist in the filesystem,
or if SELinux is disabled.
The former check is flawed because the /sys/fs/selinux
or /sys/kernel/securityfs directories may exist in sysfs
even if the mount type is disabled. Instead of just doing
an access() check, use an virFileIsMounted() to see if
the FS is actually present in the host OS. This also
avoids the need to check is_selinux_enabled().
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Some mounts must be skipped if running inside a user namespace,
since the kernel forbids their use. Instead of strcmp'ing the
filesystem type in the body of the loop, set an explicit flag
in the lxcBasicMounts table.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the lxcBasicMounts array has separate entries for
most mounts, to reflect that we must do a separate mount
operation to make mounts read-only. Remove the duplicate
entries and instead set the MS_RDONLY flag against the main
entry. Then change lxcContainerMountBasicFS to look for the
MS_RDONLY flag, mask it out & do a separate bind mount.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The 'srcpath' variable is initialized from 'mnt->src' and never
changed thereafter. Some places continue to use 'mnt->src' and
others use 'srcpath'. Remove the pointless 'srcpath' variable
and use 'mnt->src' everywhere.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virLXCBasicMountInfo struct contains a 'char *opts'
field passed onto the mount() syscall. Every entry in the
list sets this to NULL though, so it can be removed to
simplify life.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Expand the "secmodel" XML fragment of "host" with a sequence of
baselabel's which describe the default security context used by
libvirt with a specific security model and virtualization type:
<secmodel>
<model>selinux</model>
<doi>0</doi>
<baselabel type='kvm'>system_u:system_r:svirt_t:s0</baselabel>
<baselabel type='qemu'>system_u:system_r:svirt_tcg_t:s0</baselabel>
</secmodel>
<secmodel>
<model>dac</model>
<doi>0</doi>
<baselabel type='kvm'>107:107</baselabel>
<baselabel type='qemu'>107:107</baselabel>
</secmodel>
"baselabel" is driver-specific information, e.g. in the DAC security
model, it indicates USER_ID:GROUP_ID.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The lxcContainerSetID() method prints a misleading log
message about setting the uid/gid when no ID map is
present in the XML config. Skip the debug message in
this case.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Most of the usage of getuid()/getgid() is in cases where we are
considering what privileges we have. As such the code should be
using the effective IDs, not real IDs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Unconditional use of getenv is not secure in setuid env.
While not all libvirt code runs in a setuid env (since
much of it only exists inside libvirtd) this is not always
clear to developers. So make all the code paranoid, even
if it only ever runs inside libvirtd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When running setuid, we must be careful about what env vars
we allow commands to inherit from us. Replace the
virCommandAddEnvPass function with two new ones which do
filtering
virCommandAddEnvPassAllowSUID
virCommandAddEnvPassBlockSUID
And make virCommandAddEnvPassCommon use the appropriate
ones
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A typo in the setup of NBD backed filesystems meant the
/dev/nbdN device would not be added to the cgroups device
ACL.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up all remaining offenders.
* src/lxc/lxc_process.c (virLXCProcessSetupInterfaceBridged): Drop
needless const.
* src/uml/uml_driver.c (umlMonitorCommand): Use intended type.
(umlMonitorAddress): Fix fallout.
* src/xen/xm_internal.c (xenXMDomainSearchForUUID): Use intended type.
Signed-off-by: Eric Blake <eblake@redhat.com>
'const fooPtr' is the same as 'foo * const' (the pointer won't
change, but it's contents can). But in general, if an interface
is trying to be const-correct, it should be using 'const foo *'
(the pointer is to data that can't be changed).
Fix up offenders in src/conf/domain_conf, and their fallout.
Several things to note: virObjectLock() requires a non-const
argument; if this were C++, we could treat the locking field
as 'mutable' and allow locking an otherwise 'const' object, but
that is a more invasive change, so I instead dropped attempts
to be const-correct on domain lookup. virXMLPropString and
friends require a non-const xmlNodePtr - this is because libxml2
is not a const-correct library. We could make the src/util/virxml
wrappers cast away const, but I figured it was easier to not
try to mark xmlNodePtr as const. Finally, virDomainDeviceDefCopy
was a rather hard conversion - it calls virDomainDeviceDefPostParse,
which in turn in the xen driver was actually modifying the domain
outside of the current device being visited. We should not be
adding a device on the first per-device callback, but waiting until
after all per-device callbacks are complete.
* src/conf/domain_conf.h (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainObjAssignDef, virDomainObjListAdd): Drop attempt at
const.
(virDomainDeviceDefCopy): Use intended type.
(virDomainDeviceDefParse, virDomainDeviceDefPostParseCallback)
(virDomainVideoDefaultType, virDomainVideoDefaultRAM)
(virDomainChrGetDomainPtrs): Make const-correct.
* src/conf/domain_conf.c (virDomainObjListFindByID)
(virDomainObjListFindByUUID, virDomainObjListFindByName)
(virDomainDeviceDefCopy, virDomainObjListAdd)
(virDomainObjAssignDef, virDomainHostdevSubsysUsbDefParseXML)
(virDomainHostdevSubsysPciOrigStatesDefParseXML)
(virDomainHostdevSubsysPciDefParseXML)
(virDomainHostdevSubsysScsiDefParseXML)
(virDomainControllerModelTypeFromString)
(virDomainTPMDefParseXML, virDomainTimerDefParseXML)
(virDomainSoundCodecDefParseXML, virDomainSoundDefParseXML)
(virDomainWatchdogDefParseXML, virDomainRNGDefParseXML)
(virDomainMemballoonDefParseXML, virDomainNVRAMDefParseXML)
(virSysinfoParseXML, virDomainVideoAccelDefParseXML)
(virDomainVideoDefParseXML, virDomainHostdevDefParseXML)
(virDomainRedirdevDefParseXML)
(virDomainRedirFilterUsbDevDefParseXML)
(virDomainRedirFilterDefParseXML, virDomainIdMapEntrySort)
(virDomainIdmapDefParseXML, virDomainVcpuPinDefParseXML)
(virDiskNameToBusDeviceIndex, virDomainDeviceDefCopy)
(virDomainVideoDefaultType, virDomainHostdevAssignAddress)
(virDomainDeviceDefPostParseInternal, virDomainDeviceDefPostParse)
(virDomainChrGetDomainPtrs, virDomainControllerSCSINextUnit)
(virDomainSCSIDriveAddressIsUsed)
(virDomainDriveAddressIsUsedByDisk)
(virDomainDriveAddressIsUsedByHostdev): Fix fallout.
* src/openvz/openvz_driver.c (openvzDomainDeviceDefPostParse):
Likewise.
* src/libxl/libxl_domain.c (libxlDomainDeviceDefPostParse):
Likewise.
* src/qemu/qemu_domain.c (qemuDomainDeviceDefPostParse)
(qemuDomainDefaultNetModel): Likewise.
* src/lxc/lxc_domain.c (virLXCDomainDeviceDefPostParse):
Likewise.
* src/uml/uml_driver.c (umlDomainDeviceDefPostParse): Likewise.
* src/xen/xen_driver.c (xenDomainDeviceDefPostParse): Split...
(xenDomainDefPostParse): ...since per-device callback is not the
time to be adding a device.
Signed-off-by: Eric Blake <eblake@redhat.com>
Make the virLXCProcessReadLogOutputData method ignore the log
lines about the container startup argv, ignore the generic
error message from libvirt_lxc when lxcContainerMain fails
and skip over blank lines.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The lxcContainerResolveSymlinks method merely logged some errors
as debug messages, rather than reporting them as proper errors.
This meant startup failures were not diagnosed at all.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Ensure the lxcContainerMain method reports any errors that
occur during setup to stderr, where libvirtd will pick them
up.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In Fedora 20, libvirt_lxc crashes immediately at startup with a
trace
#0 0x00007f0cddb653ec in free () from /lib64/libc.so.6
#1 0x00007f0ce0e16f4a in virFree (ptrptr=ptrptr@entry=0x7f0ce1830058) at util/viralloc.c:580
#2 0x00007f0ce0e2764b in virResetError (err=0x7f0ce1830030) at util/virerror.c:354
#3 0x00007f0ce0e27a5a in virResetLastError () at util/virerror.c:387
#4 0x00007f0ce0e28858 in virEventRegisterDefaultImpl () at util/virevent.c:233
#5 0x00007f0ce0db47c6 in main (argc=11, argv=0x7fff4596c328) at lxc/lxc_controller.c:2352
Normally virInitialize calls virErrorInitialize and
virThreadInitialize, but we don't link to libvirt.so
in libvirt_lxc, and nor did we ever call the error
or thread initializers.
I have absolutely no idea how this has ever worked, let alone
what caused it to stop working in Fedora 20.
In addition not all code paths from virLogSetFromEnv will
ensure virLogInitialize is called correctly, which is another
possible crash scenario.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC code would read the log file if an LXC guest failed to
startup. There were a number of failure cases where the guest
will not start and libvirtd never gets as far as looking at the
log file.
Fix this by replacing some earlier generic errors with messages
from the log.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller main() method initialized 'rc' to 1
rather than '-1'. In the cleanup path it will print any
error to stderr, if-and-only-if rc < 0. Hence the incorrect
initialization caused errors to be lost.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The LXC controller uses dbus to talk to systemd to create
cgroups. This means that each LXC controller instance has
a dbus connection. The DBus daemon is limited to 256
connections by default and we want to be able to run many
1000 of containers.
While the dbus limit could be raised in the config files,
it is simpler to make libvirt LXC controller close its
dbus connection once everything is configured.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Since 76b644c when the support for RAM filesystems was introduced,
libvirt accepted the following XML:
<source usage='1024' unit='KiB'/>
This was parsed correctly and internally stored in bytes, but it
was formatted as (with an extra 's'):
<source usage='1024' units='KiB'/>
When read again, this was treated as if the units were missing,
meaning libvirt was unable to parse its own XML correctly.
The usage attribute was documented as being in KiB, but it was not
scaled if the unit was missing. Transient domains still worked,
because this was balanced by an extra 'k' in the mount options.
This patch:
Changes the parser to use 'units' instead of 'unit', as the latter
was never documented (fixing persistent domains) and some programs
(libvirt-glib, libvirt-sandbox) already parse the 'units' attribute.
Removes the extra 'k' from the tmpfs mount options, which is needed
because now we parse our own XML correctly.
Changes the default input unit to KiB to match documentation, fixing:
https://bugzilla.redhat.com/show_bug.cgi?id=1015689
The virConnectPtr is passed around loads of nwfilter code in
order to provide it as a parameter to the callback registered
by the virt drivers. None of the virt drivers use this param
though, so it serves no purpose.
Avoiding the need to pass a virConnectPtr means that the
nwfilterStateReload method no longer needs to open a bogus
QEMU driver connection. This addresses a race condition that
can lead to a crash on startup.
The nwfilter driver starts before the QEMU driver and registers
some callbacks with DBus to detect firewalld reload. If the
firewalld reload happens while the QEMU driver is still starting
up though, the nwfilterStateReload method will open a connection
to the partially initialized QEMU driver and cause a crash.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If veth device allocation has a fatal error, the veths
array may contain NULL device names. Avoid calling the
virNetDevVethDelete function on such names.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
During container cleanup there is a race where the kernel may
have destroyed the veth device before we try to set it offline.
This causes log error messages. Given that we're about to
delete the device entirely, setting it offline is pointless.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We forgot to do cleanup when lxcContainerMountFSTmpfs
failed to bind fs as read-only.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
The problem is described by [0] but its effect on libvirt is that
starting a container with a full distro running systemd after having
stopped it simply fails.
The container cleanup now calls the machined Terminate function to make
sure that everything is in order for the next run.
[0]: https://bugs.freedesktop.org/show_bug.cgi?id=68370
If a dir does not exist, raise an immediate error in logs
rather than letting virFileResolveAllLinks fail, since this
gives better error reporting to the user.
Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
