Do not use the rollback code path on success just to avoid extra call to
qemuHotplugRemoveManagedPR.
Rename the label and use it only when rolling back.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The only place which actually checked the return value would skip code
e.g. to delete unused files or stop no longer used services. The rest of
the callers ignored the value.
As this is expected to be used on cleanup code paths which have no
possibility to report errors we should remove the return value
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The block copy operation is supposed to just move the disk to a new
destination. While in certain scenarios it'd make sense to drop the
copy-on-read layer, the definition would not correspond to it.
This was caused by a fix to the behaviour of the block job after
conversion to -blockdev as 'blockdev-mirror' requires the top node of
the disk to be selected. This also causes that the 'copy-on-read' filter
is ejected but libvirt doesn't unplug it.
Instead we need to use the 'replaces' argument of 'blockdev-mirror'
which allows to keep filters in place. This will preserve the
configuration (which can be optimized later) and also fixes a spurious
error logged when trying to unplug the first real file node after
copy-on-read which still looks used to qemu.
This is also needed for the upcoming feature which adds 'throttle'
filter layers as we need to keep those in place too to facilitate the
throttling.
Resolves: https://issues.redhat.com/browse/RHEL-40077
Fixes: e3137539a9c4af25ab085506d5467ec0847b0ecc
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The 'replaces' field controls which node will be replaced by the job.
This can be used to e.g. keep filter nodes in place after the copy
finishes.
This will be used to keep the 'copy-on-read' and 'throttle' layers in
place after a copy.
This patch wires up the monitor and test, but the real callers pass NULL
for now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similarly to 'virtio-blk' users can map multiple iothreads and pin them
appropriately for 'virtio-scsi' controllers to ensure the best
performance.
Implement the validation and command line generation based on the
helpers we have for 'virtio-blk'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Upcoming qemu release will support configuring mapping iothreads to
virtio queues for 'virtio-scsi' controllers in order to improve
performance.
Reuse the infrastructure we have from the same configuration for
'virti-blk' to implement the conf support for this feature.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'virtio-scsi' controller now supports iothread<->virtqueue mapping
configuration.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since commit f23f8ff91a virtio-mem supports also CCW. When hotplugging a
virtio-mem device with a CCW address results in a PCI device getting
attached. The method qemuDomainAssignMemoryDeviceSlot is only
considering PCI as address type and overwriting the CCW address. Adding
support for address type CCW.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Wire the external server RDP support with QEMU.
Check the configuration, allocate a port, start the process
and set the credentials.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This will help with the following patch, which also requires config access.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Helpers to start the qemu-rdp server and set it up.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, if dbus-daemon writes on errfd, it will SIGPIPE.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The following changes are going to communicate with the qemu-rdp server
through the VM D-Bus bus, keep a connection for that and further usage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
RDP server uses port 3389 by default.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Generalize the function, broaden its potential usage.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Like VNC, allow to set credentials for RDP.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Helps avoid/debug a potential SEGV if conn is NULL, since gio will not
set the "gerror" in that case and we will crash later at:
virReportError(VIR_ERR_DBUS_SERVICE, "%s", gerror->message);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
glib anti-pattern, since it aborts on OOM.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Introduce a new ninja target
ninja -C build regen-{PROTO}
eg
ninja -C build regen-admin_protocol
that will re-create the reference output file based on what the
current pdwtags command emits. A small change is made to squash
whitespace on enum declarations so that introducing a new longer
enum name doesn't trigger re-indent of all existing enum names.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This makes the output match what current pdwtags will emit,
modulo some whitespace changes made by the check script
before comparison.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When event handler thread is created inside of
virCHStartEventHandler() the monitor object is refed because the thread
(virCHEventHandlerLoop()) that's created in the very next step
uses it. But right after that, the monitor object is unrefed,
which is wrong because it takes away the reference which was
handed over to the thread. The monitor must be unrefed inside the
thread, when no longer needed.
And while at it, move the unref call of the domain object after
the debug print which obviously accesses the domain definition.
Signed-off-by: Kirill Shchetiniuk <kshcheti@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If starting a CH domain fails an error is reported and
virCHProcessStart() calls virCHProcessStop() to clean up any
residues. Problem is, inside of virCHProcessStop() some public
APIs might be called (e.g. virNetworkLookupByName(),
virNetworkPortLookupByUUID() and/or virNetworkPortDelete()). Per
our design, public APIs reset last error which means the useful
error reported earlier is lost.
Fix this by calling virErrorPreserveLast() + virErrorRestore()
combo inside of virCHProcessStop().
Signed-off-by: Kirill Shchetiniuk <kshcheti@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The original implementation of the passt backend for vhost-user
interfaces erroneously forgot to parse:
<source dev='blah'/>
for interface type='vhostuser', so it wasn't being added to the passt
commandline, and also wasn't being saved to the domain config. Now we
parse it whenever the <backend> type='passt', no matter what the
interface type, and then throw an error during validation if
source/@dev was specified for interface type = 'user|vhostuser' and
backend type != 'passt'.
Fixes: 1e9054b9c79d721a55f413c2983c5370044f8f60
Resolves: https://issues.redhat.com/browse/RHEL-82539
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Also from qemuBuildGraphicsVNCCommandLine
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
No longer required since we don't require driver->privileged anymore.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
qemuCaps is obviously used.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Firstly, let's switch from explicit virCHDriverGetConfig() +
virObjectUnref() combo to g_autoptr(virCHDriverConfig). This
leaves us with the @monitor variable which is initialized to NULL
only to be then set to the retval of virCHMonitorNew() and
returned instantly. Well, the variable is now useless and can be
dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
At the beginning of virCHProcessStop() the ref to driver config
is obtained (via virCHDriverGetConfig()), but corresponding unref
call is lacking. Use g_autoptr() to make sure the config is
unrefed always.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When the CH driver starts a domain virCHProcessSetupIOThreads()
is called eventually which in turn calls
virCHMonitorGetIOThreads(). The latter returns an array of
iothreads which is never freed leading to a memleak:
130 (104 direct, 26 indirect) bytes in 1 blocks are definitely lost in loss record 1,804 of 1,998
at 0x484CEF3: calloc (vg_replace_malloc.c:1675)
by 0x4F0E7A9: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.8000.5)
by 0xB3A9359: virCHMonitorGetIOThreads (ch_monitor.c:1183)
by 0xB3AA5BB: virCHProcessSetupIOThreads (ch_process.c:348)
by 0xB3AAC59: virCHProcessSetup (ch_process.c:480)
by 0xB3AC75A: virCHProcessStart (ch_process.c:973)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
by 0x168F18: remoteDispatchDomainCreateXMLHelper (remote_daemon_dispatch_stubs.h:5167)
by 0x4B20066: virNetServerProgramDispatchCall (virnetserverprogram.c:423)
by 0x4B1FB99: virNetServerProgramDispatch (virnetserverprogram.c:299)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are some members of the virCHDomainObjPrivate struct that
are allocated at various stages of domain lifecycle but then are
never freed:
1) cgroup - allocated in virDomainCgroupSetupCgroup()
2) autoCpuset - this one is actually never allocated (and thus is
always NULL, but soon it may be used. Just free
it for now, which is a NOP anyways.
3) autoNodeset - same story as 2).
There are two more members, which shouldn't be freed:
1) driver - this is just a raw pointer to the CH driver (see
virCHDomainObjPrivateAlloc()).
2) monitor - this member is cleared in virCHProcessStop(), way
before control even gets to
virCHDomainObjPrivateFree().
452 (400 direct, 52 indirect) bytes in 1 blocks are definitely lost in loss record 1,944 of 1,998
at 0x484CEF3: calloc (vg_replace_malloc.c:1675)
by 0x4F0E7A9: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.8000.5)
by 0x49479CE: virCgroupNewFromParent (vircgroup.c:893)
by 0x49481BA: virCgroupNewDomainPartition (vircgroup.c:1068)
by 0x494915E: virCgroupNewMachineManual (vircgroup.c:1378)
by 0x49492FE: virCgroupNewMachine (vircgroup.c:1432)
by 0x4B5E3DE: virDomainCgroupInitCgroup (domain_cgroup.c:377)
by 0x4B5E9CD: virDomainCgroupSetupCgroup (domain_cgroup.c:524)
by 0xB3AC693: virCHProcessStart (ch_process.c:951)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There are two places where curl_slist_append() is called but
corresponding call to curl_slist_free_all() is missing:
virCHMonitorPutNoContent() and virCHMonitorGet() which leads to
memleaks:
41 (16 direct, 25 indirect) bytes in 1 blocks are definitely lost in loss record 992 of 1,998
at 0x4845888: malloc (vg_replace_malloc.c:446)
by 0x5B2F8FE: curl_slist_append (in /usr/lib64/libcurl.so.4.8.0)
by 0xB3A7B41: virCHMonitorPutNoContent (ch_monitor.c:824)
by 0xB3A89FF: virCHMonitorBootVM (ch_monitor.c:1030)
by 0xB3AC6F1: virCHProcessStart (ch_process.c:967)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
by 0x168F18: remoteDispatchDomainCreateXMLHelper (remote_daemon_dispatch_stubs.h:5167)
by 0x4B20066: virNetServerProgramDispatchCall (virnetserverprogram.c:423)
by 0x4B1FB99: virNetServerProgramDispatch (virnetserverprogram.c:299)
by 0x4B28B5E: virNetServerProcessMsg (virnetserver.c:135)
88 (16 direct, 72 indirect) bytes in 1 blocks are definitely lost in loss record 1,501 of 1,998
at 0x4845888: malloc (vg_replace_malloc.c:446)
by 0x5B2F8FE: curl_slist_append (in /usr/lib64/libcurl.so.4.8.0)
by 0xB3A7E41: virCHMonitorGet (ch_monitor.c:864)
by 0xB3A92E2: virCHMonitorGetInfo (ch_monitor.c:1157)
by 0xB3A9CEA: virCHProcessUpdateInfo (ch_process.c:142)
by 0xB3AAD36: virCHProcessSetup (ch_process.c:492)
by 0xB3AC75A: virCHProcessStart (ch_process.c:973)
by 0xB39B7D4: chDomainCreateXML (ch_driver.c:246)
by 0x4CC9D32: virDomainCreateXML (libvirt-domain.c:188)
by 0x168F91: remoteDispatchDomainCreateXML (remote_daemon_dispatch_stubs.h:5186)
by 0x168F18: remoteDispatchDomainCreateXMLHelper (remote_daemon_dispatch_stubs.h:5167)
by 0x4B20066: virNetServerProgramDispatchCall (virnetserverprogram.c:423)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The shutdown inhibitor is created in networkStateInitialize() but
corresponding call to virInhibitorFree() is missing in
networkStateCleanup() leading to a memleak:
116 (72 direct, 44 indirect) bytes in 1 blocks are definitely lost in loss record 1,769 of 1,998
at 0x484CEF3: calloc (vg_replace_malloc.c:1675)
by 0x4F0E7A9: g_malloc0 (in /usr/lib64/libglib-2.0.so.0.8000.5)
by 0x4993B9B: virInhibitorNew (virinhibitor.c:152)
by 0x5279394: networkStateInitialize (bridge_driver.c:654)
by 0x4CC74DC: virStateInitialize (libvirt.c:665)
by 0x15B719: daemonRunStateInit (remote_daemon.c:613)
by 0x49F2B44: virThreadHelper (virthread.c:256)
by 0x5356662: start_thread (in /usr/lib64/libc.so.6)
by 0x53D7DA3: clone (in /usr/lib64/libc.so.6)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The 'transform' attribute of 'bitmaps' was added in qemu-6.0, thus
we can assume all qemus we're willing to use support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
