With this script you can run libvirt programs without needing to
install them first. You just have to do for example:
./run ./tools/virsh [args ...]
If you are already in the tools/ subdirectory, then the following
command will also work:
../run ./virsh [...]
You can also run the C programs under valgrind like this:
./run valgrind [valgrind opts...] ./program
or under gdb:
./run gdb --args ./program
This also works with sudo (eg. if you need root access for libvirt):
sudo ./run ./tools/virsh list --all
Derived from libguestfs and simplified. The ./run script in
libguestfs is much more sophisticated:
https://github.com/libguestfs/libguestfs/blob/master/run.in
The Mingw32 toolchain is broadly obsoleted by the Mingw64 toolchain.
The latter has been adopted by Fedora 17 and newer. Maintaining a
RPM spec for Mingw32 is a needless burden, so switch to a Mingw64
RPM spec (which provides 32 & 64 bit builds).
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I went with the shorter license notice used by src/libvirt.c,
rather than spelling out the full LGPLv2+ clause into each of
these files.
* configure.ac: Declare copyright.
* all Makefile.am: Likewise.
The rule of thumb is that any file generated by config.status
is a) reproducible by any user, b) dependent on configure options.
Therefore, it is inappropriate to include such generated files
in the tarball (for proof, Makefile is generated from Makefile.in;
the former is not in the tarball while the latter is).
* Makefile.am (EXTRA_DIST): Remove files covered by AC_OUTPUT.
Not every day you see a patch that nukes 27 files!
* .gnulib: Update to latest, for maint.mk improvements
* bootstrap: Resync to gnulib.
* bootstrap.conf (ACLOCAL): Swap the secondary aclocal include
directory, now that bootstrap picks up gnulib/m4 instead of m4.
* Makefile.am (syntax_check_exceptions, EXTRA_DIST): No longer
worry about nuked files.
* cfg.mk (sc_x_sc_dist_check): Delete dead rule.
(VC_LIST_ALWAYS_EXCLUDE_REGEX): Add HACKING.
(exclude_file_name_regexp--sc_*): Inline and simplify contents...
* .x-sc_*: ...from here, then delete the files.
commit f1fe9671e was supposed to make sure we use files.h
macros to avoid double close, but it didn't work.
Meanwhile, virCommand is vastly superior to system(), fork(),
and popen() (also to virExec, but we haven't completed that
conversion), so enforce that, too.
* cfg.mk (sc_prohibit_close): Fix typo that excluded close, and
add pclose.
(sc_prohibit_fork_wrappers): New rule, for fork, system, and popen.
* .x-sc_prohibit_close: More exemptions.
* .x-sc_prohibit_fork_wrappers: New file.
* Makefile.am (syntax_check_exceptions): Ship new file.
* src/datatypes.c (virReleaseConnect): Tweak comment to avoid
false positive.
* src/util/files.h (VIR_CLOSE): Likewise.
* .gnulib: Update, for sc_prohibit_strcmp fix.
* cfg.mk: Adjust copyright; the only FSF portions come from when
this file was copied from coreutils.
(sc_prohibit_strncmp): Copy bug-fixes from sc_prohibit_strcmp.
* .x-sc_prohibit_strcmp: Delete, now that rule is smarter.
* .x-sc_prohibit_strncmp: Likewise.
* Makefile.am (syntax_check_exceptions): Track deletion.
Making this change makes it easier to spot the memory leaks
that will be fixed in the next patch.
* cfg.mk (sc_prohibit_xmlGetProp): New rule.
* .x-sc_prohibit_xmlGetProp: New exception.
* Makefile.am (EXTRA_DIST): Ship exception file.
* tools/virsh.c (cmdDetachInterface, cmdDetachDisk): Adjust
offenders.
* src/conf/storage_conf.c (virStoragePoolDefParseSource):
Likewise.
* src/conf/network_conf.c (virNetworkDHCPRangeDefParseXML)
(virNetworkIPParseXML): Likewise.
* Makefile.am (EXTRA_DIST): Factor exceptions files...
(syntax_check_excpetions): into new list. Include recently added
exceptions.
* cfg.mk (sc_x_sc_dist_check): New check, copied from coreutils.
Using 'int ret = strcmp(a, b)' in a qsort function is a valid use of
str[n]cmp that should _not_ be turned to STREQ, but it was falling
foul of our specific syntax-check. Meanwhile, gnulib's maint.mk
already has a tighter bound for strcmp, so we can copy that regex and
just check for strncmp, which results in fewer false positives that
require exceptions.
* cfg.mk (sc_prohibit_strcmp_and_strncmp): Rename...
(sc_prohibit_strncmp): ...to this, and tighten, to mirror
maint.mk's sc_prohibit_strcmp's better regex.
* Makefile.am (syntax_check_exceptions): Update exception rule.
* .x-sc_prohibit_strcmp_and_strncmp: Rename...
* .x-sc_prohibit_strncmp: ...and trim.
Allows bootstrap to work on FreeBSD, where gzip doesn't have a '.'
in its version; and silences false positives in the new
'make syntax-check' rule.
* .gnulib: Update to latest.
* bootstrap: Synchronize to upstream.
* .x-sc_bindtextdomain: New exemptions.
* Makefile.am (syntax_check_exceptions): Ship new file.
* .gitignore: Regenerate per latest bootstrap, anchor entries that
are only in the root directory, and consolidate entries from other
generated .gitignore files.
* build-aux/.gitignore, m4/.gitignore, po/.gitignore: Remove from
version control, since bootstrap generates them.
* cfg.mk (sc_prohibit_trailing_blank_lines): Delete; this is
adequately covered by maint.mk's sc_prohibit_empty_lines_at_EOF.
* .x-sc_prohibit_empty_lines_at_EOF: New file, to exempt raw
patches.
* Makefile.am (EXTRA_DIST): Include new exemption.
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.
This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).
# stap examples/systemtap/client.stp
Client fd=44 connected readonly=0
Client fd=44 auth polkit deny pid:24997,uid:500
Client fd=44 disconnected
Client fd=46 connected readonly=1
Client fd=46 auth sasl allow test
Client fd=46 disconnected
The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.
* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
'./autobuild.sh' with lcov installed discovered that our
coverage support has been bit-rotting for a while. This
restores it back to a successful state, although I have
not yet spent any time looking through the resulting files to
look for low-hanging fruit in the unit test coverage front.
* configure.ac: Clear COMPILER_FLAGS at right place.
* Makefile.am (cov): Newer genhtml no longer likes plain -s.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Don't AC_SUBST
COMPILER_FLAGS; it is a shell variable for use in configure only.
* src/Makefile.am (AM_CFLAGS, AM_LDFLAGS): New variables, to make
it easier to provide global flag additions. Use throughout, to
uniformly apply coverage flags.
* .gitignore: Globally ignore gcov output.
* daemon/.gitignore: Simplify.
* src/.gitignore: Likewise.
* tests/.gitignore: Likewise.
tests/virt-aa-helper-test and examples/apparmor are not included in
official tarballs, but should be. Attached is a patch to fix that
which works when apparmor is and is not available.
We should always be using virGetHostname in place of
gethostname; thus add in a new syntax-check rule to make
sure no new uses creep in.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Make a pass over the syntax-check files, tightening up regex's,
un-ignoring certain files, and cleaning things up.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Removes some auto-generated files still under version control.
It also moves the rule for generating NEWS into the Makefile.am
that's in the same directory as the output file to avoid confusion
* docs/libvirt-api.xml, docs/libvirt-refs.xml, NEWS: Remove
auto-generated files from source control
* Makefile.am: Add rule for generating NEWS file
* docs/Makefile.am: Remove rule for generating NEWS file
* Makefile.am: examples/domain-events/events-python should be added
to dist tarball
* libvirt.spec.in: there is no makefile in domain-events but in
domain-events/events-c and python/libvirtclass.txt has vanished
* docs/storage/: Move to examples/xml/storage/
* docs/test*.xml: Move to examples/xml/test/
* docs/Makefile.am: Remove example XML files from dist
* Makefile.am: Add examples/xml to EXTRA_DIST
* tests/virshtest.c: Update for moved test XML
* libvirt.spec.in: Include example XML files as docs
* tests/int-overflow: UPdate for moved XML
* Makefile.am: Add examples/dominfo examples/domsuspend examples/python
as SUBDIRS
* configure.in: Update AC_OUTPUT for new/old Makefiles
* docs/Makefile.am: Remove examples from SUBDIRS
* docs/examples/info1.c: Move to examples/dominfo/info1.c
* docs/examples/suspend.c: Move to examples/domsuspend/suspend.c
* docs/examples: Remove all remaining files
* docs/examples/python: Moved to examples/python/
* examples/dominfo/Makefile.am, examples/domsuspend/Makefile.am: New
build files
* libvirt.spec.in: Update to take account of moved examples
Move the virsh tool and its man page into the tools directory
* Makefile.am: Remove rules for virsh.1 man page
* virsh.1: Remove auto-generated file
* docs/Makefile.am: Remove rules for virsh.pod man page
* docs/virsh.pod: Move to tools/ directory
* src/Makefile.am, src/.gitignore: Remove rules for virsh
* src/console.c, src/console.h, src/*.ico, src/virsh_win_icon.rc,
src/virsh.c: Move into tools/ directory
* tools/Makefile.am: Add rules for building virsh
* tools/.gitignore: Ignore virsh built files
* tests/virshtest.c, tests/int-overflow: Update for new
virsh location
When "git pull" (or any other operation) brings in a new version of the
gnulib git submodule, you must rerun the autogen.sh script. With this
change, "make" now fails and tells you to run ./autogen.sh, when needed.
* autogen.sh: Maintain a new file, .git-module-status, containing
the current submodule status. If it doesn't exist or its content
is different from what "git submodule status" prints, then run
./bootstrap
* .gitignore: Add .git-module-status
* cfg.mk: Diagnose out of date submodule and fail.
* README-hacking: Update not to mention bootstrap.
* Makefile.am (MAINTAINERCLEANFILES): Add .git-module-status,
so that "make maintainerclean" will remove it.
No longer maintain a version-controlled ChangeLog file, but do
continue to include a ChangeLog file in distribution tarball.
* Makefile.am (gen-ChangeLog): New rule.
(dist-hook): Depend on it.
(EXTRA_DIST): Add ChangeLog-old.
* bootstrap (modules): Add gitlog-to-changelog.
* ChangeLog: Remove file. Renamed to...
* ChangeLog-old: ...this. New file.
* autogen.sh: Touch ChangeLog, to ensure it exists. For automake.
Since Makefile.maint will soon come from gnulib's maint.mk,
sync Makefile.maint to have the same contents (modulo minor
things). In syncing it, we have to remove some libvirt-specific
rules. Since we want to keep them (of course), put those in cfg.mk.
* Makefile.maint: Merge from gnulib's maint.mk.
* cfg.mk (sc_avoid_write): New rule. From Makefile.cfg.
(sc_prohibit_strcmp_and_strncmp): Likewise, and rename.
(sc_prohibit_asprintf, sc_prohibit_VIR_ERR_NO_MEMORY): Likewise.
(sc_prohibit_nonreentrant): Likewise.
(sc_prohibit_ctype_h): Likewise.
(sc_TAB_in_indentation, sc_avoid_ctype_macros): Likewise.
(sc_prohibit_virBufferAdd_with_string_literal): Likewise.
(sc_prohibit_gethostby): Likewise.
(sc_libvirt_unmarked_diagnostics): Likewise. Also, rename the
rule, inserting "_libvirt", since this rule is a specialization of
the one in gnulib.
* GNUmakefile: Include cfg.mk, not Makefile.cfg
* .x-sc_prohibit_strcmp_and_strncmp: New file.
* Makefile.am (EXTRA_DIST): Add .x-sc_prohibit_strcmp_and_strncmp
Don't use mylibtool, (subsumed by automake's silent rules)
Its use was causing a non-srcdir build to fail.
* Makefile.am (EXTRA_DIST): Remove mylibtool.
* configure.in: Don't use mylibtool.
* configure.in: Use AM_SILENT_RULES([yes]),
but only if that m4 macro is defined.
Thus, it works even on systems that lack automake-1.11.
Daniel Berrange suggested adding the conditional, so that
we don't have a hard requirement on 1.11, e.g., for RHEL5.
* qemud/Makefile.am: Ensure that the generated remote_protocol.c
includes <config.h> first.
* Makefile.maint (sc_require_config_h_first): New rule, so that
"make syntax-check" enforces this.
* .x-sc_require_config_h_first: New file.
* Makefile.am (.x-sc_require_config_h_first): Add it.
* qemud/remote_protocol.x: Don't include <config.h> here.
* qemud/remote_protocol.c: Regenerate.
* include/libvirt/libvirt.h include/libvirt/libvirt.h.in
src/libvirt.c src/libvirt_sym.version: new libvirt event entry
points, big patch provided by Ben Guthro
* Makefile.am configure.in src/driver.h src/event.c src/event.h
src/internal.h src/libvirt.c src/libvirt_sym.version src/lxc_driver.c
src/openvz_driver.c src/qemu_conf.h src/qemu_driver.c
src/remote_internal.c src/storage_backend_fs.c src/test.c
qemud/event.c qemud/event.h qemud/mdns.c qemud/qemud.c
qemud/qemud.h qemud/remote.c qemud/remote_dispatch_localvars.h
qemud/remote_dispatch_proc_switch.h qemud/remote_dispatch_prototypes.h
qemud/remote_protocol.c qemud/remote_protocol.h
qemud/remote_protocol.x proxy/Makefile.am python/generator.py:
Not much is left untouched by the patch adding the events support
* docs/libvirt-api.xml docs/libvirt-refs.xml
docs/html/libvirt-libvirt.html: regenerated the docs
* examples/domain-events/events-c/Makefile.am
examples/domain-events/events-c/event-test.c: a test example
* AUTHORS: added Ben Guthro
daniel
* .cvsignore, Makefile.am, autobuild.sh, configure.in,
mingw32-libvirt.spec.in: Import the latest MinGW libvirt spec
file. Note that the file has been renamed to conform to
new Fedora packaging guidelines.
* autobuild.sh: Fix a bug in the generation of the $EXTRA_RELEASE
field when autobuilding.
