Commit Graph

1493 Commits

Author SHA1 Message Date
Martin Kletzander
adac38dbbd virsh: Try to keep printed XML pretty with change-media
When adding a new media with change-media and --print-xml, let's try
making it more readable and nice.

Before:
<disk type="file" device="cdrom">
...
      <target dev="hdb" bus="ide"/>
      <address type="drive" controller="0" bus="0" target="0" unit="1"/>
    <source file="/tmp/a.iso"/></disk>

After:
<disk type="file" device="cdrom">
...
      <source file="/tmp/a.iso"/>
      <target dev="hdb" bus="ide"/>
      <address type="drive" controller="0" bus="0" target="0" unit="1"/>
    </disk>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1219719

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-11-26 15:10:55 +01:00
Guido Günther
ba08d16d6c libvirt-guests: Disable shutdown timeout
Since we can't know at service start how many VMs will be running we
can't calculate an apropriate shutdown timeout. So instead of killing
off the service just let it use it's own internal timeout mechanism.

References:
    http://bugs.debian.org/803714
    https://bugzilla.redhat.com/show_bug.cgi?id=1195544
2015-11-18 08:15:12 +01:00
Pavel Hrdina
a9a583d6df virsh-domain: update attach-interface to support type=hostdev
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.

The interface can be attached using --type=hostdev and PCI address or
as --source.  This command also allows you to tell, whether the interface
should be managed.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-11-11 15:03:42 +01:00
Pavel Hrdina
18657e9919 virsh.pod: improve attach-interface section
Rewrite the attach-interface section in man page to be more readable and
extendable.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-11-11 15:01:37 +01:00
Pavel Hrdina
8eddc307e9 virsh-domain: use correct base for virStrToLong_ui
While parsing device addresses we should use correct base and don't
count on auto-detect.  For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong.  Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.

PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-10-27 15:26:44 +01:00
Luyao Huang
c62c59a984 virsh: Display an error when passing count <= 0 to setvcpus
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-10-22 09:22:44 +02:00
Peter Krempa
4ceaa7491e virsh: Use 'format' argument only when specified
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:

 virsh dump VM dump --format '' --memory-only

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
2015-10-16 09:01:17 +02:00
Daniel P. Berrange
9139b46a6b virt-host-validate: check for IOMMU support
This looks for existance of DMAR (Intel) and IVRS (AMD)
files under /sys/firmware/acpi/tables/, as a sign that
the platform has IOMMU present & enabled in the BIOS.

If these are present and /sys/kernel/iommu_groups does
not contain any entries this is taken as a sign that
the kernel has not enabled the IOMMU currently.

If no ACPI tables are found we can't distinguish between
disabled in BIOS and not present in the hardware, so we
have to give the user a generic hint.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-13 10:54:09 +01:00
Daniel P. Berrange
09a7a34076 virt-host-validate: disable mntent code on Win32
Win32 does not have support for mntent.h header, so the
method which uses this must be stubbed out.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-12 14:37:37 +01:00
Daniel P. Berrange
9bf595b172 virt-host-validate: check for required cgroups
Extend the virt-host-validate checks to see if the required
cgroups are compiled into the kernel and that they are
mounted on the system. The cgroups are all optional except
for 3 that LXC mandates

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-12 13:15:00 +01:00
Daniel P. Berrange
fd6d506c50 virt-host-validate: distinguish exists vs accessible for devices
Currently we just check that various devices are accessible.
This leads to inaccurate errors reported for /dev/kvm and
/dev/vhost-net if they exist but an unprivileged user lacks
access. Switch existing checks to look for file existance,
and add a separate check for accessibility of /dev/kvm
since some distros don't grant users access by default.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-12 13:15:00 +01:00
Daniel P. Berrange
8a6b6037f8 virt-host-validate.c: check for kernel namespaces
The LXC driver requires the uts, mnt, pid & ipc
namespaces, while net & user namespaces are
optional. Validate all these are present.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-10-12 13:15:00 +01:00
Michal Privoznik
d72a8f7465 virsh: Preserve startupPolicy in change-media command
https://bugzilla.redhat.com/show_bug.cgi?id=1250331

Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-29 13:29:29 +02:00
Michal Privoznik
1fb8ac4c79 tools: Link libvirt.la and readline to libvirt_shell.a
So, our mingw build is broken. It's because while libvirt_shell
library is using some of our internal APIs, e.g. virStrndup, and
readline API but it's not being linked with nor libvirt.la nor
libreadline.  Only subsequent users of the library, like virsh,
do link to the needed libraries. In fact, I'm surprised Linux
linker doesn't care, because how can it make a static library
with missing symbols is mystery to me.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-25 14:33:06 +02:00
Erik Skultety
2d9fcb3102 vsh: create a noinstall libvirt_shell library
Instead of referencing vsh sources in all relevant client targets,
create a library that the client can link against.
2015-09-24 16:58:28 +02:00
John Ferlan
35369a7d48 virsh: Resolve Coverity DEADCODE
Use 'dead_error_condition' instead of 'dead_error_begin'
2015-09-24 09:53:38 -04:00
Peter Krempa
7acfb940f7 virsh: Fix job status indicator for 0 length block jobs
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
2015-09-23 15:06:56 +02:00
Jiri Denemark
035947eb87 virsh: Notify users about disconnects
After my "client rpc: Report proper error for keepalive disconnections"
patch, virsh would no long print a warning when it closes a connection
to a daemon after a keepalive timeout. Although the warning

    virsh # 2015-09-15 10:59:26.729+0000: 642080: info :
    libvirt version: 1.2.19
    2015-09-15 10:59:26.729+0000: 642080: warning :
    virKeepAliveTimerInternal:143 : No response from client
    0x7efdc0a46730 after 1 keepalive messages in 2 seconds

was pretty ugly, it was still useful. This patch brings the useful part
back while making it much nicer:

virsh # error: Disconnected from qemu:///system due to keepalive timeout

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2015-09-23 13:09:50 +02:00
Michal Privoznik
41d4104d3e virsh: Teach attach-interface to --print-xml
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-16 16:10:48 +02:00
Michal Privoznik
0efe8f5065 virsh: Slightly rework cmdDomblklist
Let's move some variables from an inside loop to global function
declaration header block. It's going to be easier for next
patches. At the same time, order the cleanup calls at the
function's end so it's easier to track which variables are freed
and which not.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-07 11:01:11 +02:00
Erik Skultety
682775fbb8 vsh: Make vshInitDebug static
There's no reason why debug initialization could not be made completely
hidden, just like readline initialization is. The point of the global
initializer vshInit is to make initialization of smaller features transparent
to the user/caller.
2015-09-04 14:12:34 +02:00
Erik Skultety
a02de849a0 virsh: Do not make interactive mode default
Currently, we set interactive mode as default possibly reverting the
setting after we parse the command line arguments. There's nothing
particulary wrong with that, but a call to vshReadlineInit is performed
always in the global initializer just because the default mode is interactive.
Rather than moving vshReadlineInit call somewhere else (because another client
might want to implement interactive mode only), we could make the decision
if we're about to run in interactive mode once the command line is parsed.
2015-09-04 14:12:34 +02:00
Erik Skultety
f59d51f518 vsh: Introduce vshInitReload
Commit a0b6a36f separated vshInitDebug from the original vshInit
(before virsh got split and vshInit became virshInit - commit 834c5720)
in order to be able to debug command line parsing.
After the parsing is finished, debugging is reinitialized to work properly.
There might as well be other features that require re-initialization as
the command line could specify parameters that override our defaults which
had been set prior to calling vshArgvParse.
2015-09-04 14:12:34 +02:00
Erik Skultety
57b8a38840 vsh: adjust vshInit signature and remove redundant error label
As part of the effort to stay consistent, change the vshInit signature
from returning int to returning bool. Moreover, remove the
unnecessary error label as there is no cleanup that would make use of
it.
2015-09-04 14:12:34 +02:00
Michal Privoznik
4fdd873f1a vshInit: Don't leak @histsize_env
Caller is responsible for freeing the result of virStringJoin()
when no longer needed:

==10701== 1 bytes in 1 blocks are definitely lost in loss record 1 of 806
==10701==    at 0x4C29F80: malloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==10701==    by 0xAADB679: strdup (in /lib64/libc-2.20.so)
==10701==    by 0x4F18655: virStrdup (virstring.c:726)
==10701==    by 0x4F175AF: virStringJoin (virstring.c:165)
==10701==    by 0x131D4D: vshReadlineInit (vsh.c:2572)
==10701==    by 0x1322DF: vshInit (vsh.c:2736)
==10701==    by 0x1347C1: main (virsh.c:907)

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-09-03 14:44:57 +02:00
Jonathan Toppins
5c668a78d8 qemu: add udp interface support
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.

The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.

<interface type='udp'>
  <mac address='52:54:00:5c:67:56'/>
  <source address='127.0.0.1' port='11112'>
    <local address='127.0.0.1' port='22222'/>
  </source>
  <model type='virtio'/>
  <address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>

QEMU call:
	-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222

Notice the xml "local" entry becomes the "localaddr" for the qemu call.

reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html

Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2015-09-02 10:17:50 +02:00
Luyao Huang
70f56dd72c virsh: Reset global error after successfull domain lookup
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.

 # virsh domif-setlink 123 vnet1 up
 error: interface (target: vnet1) not found
 error: Domain not found: no domain with matching id 123

This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.

https://bugzilla.redhat.com/show_bug.cgi?id=1254152

Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2015-08-18 14:54:45 +02:00
Luyao Huang
b2da1d453f virsh: fix always return false in domrename
Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-08-17 12:43:17 -04:00
Moshe Levi
0181975689 Remove static keyword from vshReadline when readline does not exist
This patch removes the static keyword from the vshReadline which was
introduced in commit 834c5720e4. With
readline the vshReadline function is not static but when compiling
without readline it was defined as static which caused compilation
error.
2015-08-15 17:14:12 +02:00
Erik Skultety
834c5720e4 tools: Introduce new client generic module vsh
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.

Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.

Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
2015-08-14 15:45:44 +02:00
Tomas Meszaros
9877d8406c Introduce new VIR_DOMAIN_EVENT_DEFINED_RENAMED event
This should be emitted whenever a domain is renamed.

Signed-off-by: Tomas Meszaros <exo@tty.sk>
2015-08-14 10:50:20 +02:00
Tomas Meszaros
ff486e0d29 virsh: Implement "domrename" command
This patch implements new virsh command, domrename.

Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.

It takes two arguments, current domain name and new domain name.

Example:

virsh # list --all
 Id    Name                           State
 ----------------------------------------------------
  -     bar                            shut off

virsh # domrename bar foo
Domain successfully renamed

virsh # list --all
 Id    Name                           State
 ----------------------------------------------------
  -     foo                            shut off

virsh #

Signed-off-by: Tomas Meszaros <exo@tty.sk>
2015-08-14 10:50:20 +02:00
Michal Privoznik
68b2405c67 cmdAttachInterface: Fully implement @floor support
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-12 10:57:36 +02:00
Peter Krempa
73ca6f98a3 virsh: Refactor parseRateStr to avoid false-positive uninitialized variable
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:

virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
             vshError(ctl, _("malformed %s field"), field_name);
             ^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
         if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
             ^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
2015-08-12 07:33:06 +02:00
Michal Privoznik
d7f5c88961 virsh: Implement VIR_DOMAIN_BANDWIDTH_IN_FLOOR
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:

  --inbound average[,peak[,burst[,floor]]]

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-11 16:10:32 +02:00
Michal Privoznik
6983d6d2c3 virsh: Rework parseRateStr
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-08-11 16:10:32 +02:00
Luyao Huang
ee6160b549 virsh: fix domfsinfo output in quiet mode
https://bugzilla.redhat.com/show_bug.cgi?id=1250287

When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.

Signed-off-by: Luyao Huang <lhuang@redhat.com>
2015-08-05 09:58:32 +02:00
Peter Krempa
faa1439123 virsh: Refactor block job waiting in cmdBlockCopy
Similarly to the refactor of cmdBlockCommit in a previous commit this
does the same change for cmdBlockCopy.
2015-07-21 15:32:59 +02:00
Peter Krempa
7408403560 virsh: Refactor block job waiting in cmdBlockCommit
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
2015-07-21 15:32:59 +02:00
Peter Krempa
2e78276364 virsh: Refactor block job waiting in cmdBlockPull
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.

This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
2015-07-21 15:32:59 +02:00
Peter Krempa
44b18323e5 virsh: Refactor argument handling in cmdBlockPull
Put all argument parsing together and refactor the argument checking
code.
2015-07-21 15:32:59 +02:00
Peter Krempa
8e85f62826 virsh: Refactor argument handling in cmdBlockCopy
Put all argument parsing together and refactor the argument checking
code.
2015-07-21 15:32:59 +02:00
Peter Krempa
bd687cf9b9 virsh: Refactor argument checking in cmdBlockCommit
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
2015-07-21 15:32:59 +02:00
Peter Krempa
5dceea2c95 virsh: Kill blockJobImpl by moving the final impl into cmdBlockCommit
Final cleanup to get rid of the hub function.
2015-07-21 15:32:59 +02:00
Peter Krempa
bb5a145d2d virsh: Split out block pull implementation from blockJobImpl 2015-07-21 15:32:59 +02:00
Peter Krempa
a538ff8d9c virsh: block job: separate abort from blockJobImpl 2015-07-21 15:32:59 +02:00
Peter Krempa
42c9c6fcfc virsh: blockjob: Split out vshBlockJobSetSpeed from blockJobImpl 2015-07-21 15:32:58 +02:00
Peter Krempa
2f12cb9355 virsh: cmdBlockJob: Switch to declarative flag interlocking
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
2015-07-21 15:32:58 +02:00
Peter Krempa
dda95b531f virsh: blockjob: Extract block job info code into a separate function
cmdBlockJob will be converted to a hub that will call into the
individual executor functions.
2015-07-21 15:32:58 +02:00
Martin Kletzander
0f49f1dc6f virsh: Don't output node frequency if unknown
Commit ed8155eafb documented that
mhz field in virNodeInfo might be 0 if the frequency is unknown.  Modify
virsh to know about that.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-07-16 11:56:15 +02:00