virGetConnectNetwork() calls
virGetConnectGeneric(), which calls
virConnecCacheInitialize(), which is actually a call (only once) to
virConnectCacheOnceInit() which calls
virThreadLocalInit() several times, which calls
pthread_key_create()
If pthread_key_create() fails, it (of course) doesn't log an error
(because it's not a part of libvirt), nor does any other function on
the call chain all the way up to virGetConnectNetwork(). But none of
the callers of virGetConnectNetwork() log an error either, so it is
possible that an API could fail due to virGetConnectNetwork() failing,
but would only log "an error was encountered, but the cause is
unknown. Deal with it." (paraphrasing).
(In all likelyhood, virConnectCacheOnceInit() is going to be called at
some earlier time, and almost certainly pthread_key_create() will
never fail (and if it does, the user will have *much* bigger problems
than an obtuse error message from libvirt)).
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
posix_fallocate() might be not supported by a filesystem, for example,
it's not supported by ZFS. In that case it fails with
return code 22 (EINVAL), and thus safezero_posix_fallocate() returns -1.
As safezero_posix_fallocate() is the first function tried by safezero()
and it tries other functions only when it returns -2, it fails
immediately without falling back to other methods, such as
safezero_slow().
Fix that by returning -2 if posix_fallocate() returns EINVAL, to give
safezero() a chance to try other functions.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The current virPCIDeviceNew() signature, receiving 4 uints in sequence
(domain, bus, slot, function), is not neat.
We already have a way to represent a PCI address in virPCIDeviceAddress
that is used in the code. Aside from the test files, most of
virPCIDeviceNew() callers have access to a virPCIDeviceAddress reference,
but then we need to retrieve the 4 required uints (addr.domain, addr.bus,
addr.slot, addr.function) to satisfy virPCIDeviceNew(). The result is
that we have extra verbosity/boilerplate to retrieve an information that
is already available in virPCIDeviceAddress.
A better way is presented by virNVMEDeviceNew(), where the caller just
supplies a virPCIDeviceAddress pointer and the function handles the
details internally.
This patch changes virPCIDeviceNew() to receive a virPCIDeviceAddress
pointer instead of 4 uints.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Instead of receiving 4 uints in order and write domain/bus/slot/function,
receive a virPCIDeviceAddressPtr instead and write into it.
This change will allow us to simplify the API for virPCIDeviceNew()
in the next patch.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
libxlNodeDeviceGetPCIInfo() and qemuNodeDeviceGetPCIInfo() are equal.
Let's move the logic to a new virDomainDriverNodeDeviceGetPCIInfo()
info to be used by libxl_driver.c and qemu_driver.c.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is no need to open code the PCI address string format
when we have a function that does exactly that.
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Further testing revealed commit f035f53baa regresses Debian bug 955216
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=955216
Restarting libvirt-guests on libvirtd restart is worse than the original
dependency issue, so revert the commit until a better solution is found.
This reverts commit f035f53baa.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Wire up the QEMU command line for this option.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Rename virDomainCheckVirtioOptions into
virDomainCheckVirtioOptionsAreAbsent since it checks if all
virtio options are absent. The old name was very misleading.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add virtio related options iommu, ats and packed as driver element attributes
to vsock devices. Ex:
<vsock model='virtio'>
<cid auto='no' address='3'/>
<driver iommu='on'/>
</vsock>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The virDomainVirtioOptionsCheckABIStability() function is called
from various ABI stability check functions. Every caller checks
if both old and new definitions have virtio options set and only
after that they call the function. This is suboptimal because:
a) this check can be done in the function itself (making all
callers shorter),
b) is inherently wrong, because it doesn't catch case where one
definition has virtio options set and the other doesn't.
Do proper checks at the beginning of the function and simplify
its calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The previous commit rendered this function empty and needless.
Remove it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The aim of virDomainCheckVirtioOptions() function is to check
whether no virtio options are set, i.e. no @iommu no @ats and no
@packed attributes were present in given device's XML (yeah, the
function has very misleading name). Nevertheless, this kind of
check belongs to validation phase, but now is done in post parse
phase. Move the function and its calls to domain_validate.c so
that future code is not tempted to repeat this mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The qemuDomainObjFromDomain() API must be paired with
the virDomainObjEndAPI API. The qemuDomainAuthorizedSSHKeysGet
method simply did 'return -1' leaking a reference and lock
in two paths.
The qemuDomainAuthorizedSSHKeysSet method marked the object
as an autoptr while also have some code paths that will call
virDomainObjEndAPI. As a result the object will be released
but not unlocked in error paths.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
If QEMU driver fails to initialize for whatever reason (it can be
as trivial as a typo on qemu.conf), the control jumps to error
label in qemuStateInitialize() where qemuStateCleanup() is called
which frees the driver. But the daemon then asks drivers to
prepare for shutdown, which in case of QEMU driver is implemented
in qemuStateShutdownPrepare(). In here, the driver is
dereferenced but since it was freed earlier, the pointer is NULL
which leads to instant crash.
Solution is simple - just check if qemu_driver is not NULL. But
doing so only in qemuStateShutdownPrepare() would push the
problem down to virStateShutdownWait(), well
qemuStateShutdownWait(). Therefore, duplicate the trick there
too.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1895359#c14
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
All callers of this function called virStorageFileParseChainIndex
before. Internalize the logic of that function to prevent multiple calls
and passing around unnecessary temporary variables.
This is achieved by calling virStorageFileParseBackingStoreStr and using
it to fill the values internally.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
A terminated chain has a virStorageSource with type ==
VIR_STORAGE_TYPE_NONE at the end. Since virStorageSourceHasBacking
is explicitly returning false in that case we'd probe the chain
needlessly. Just check whether src->backingStore is non-NULL.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'virDomainDiskGetSource' returns src->path effectively. Checking whether
a disk is empty is done via 'virStorageSourceIsEmpty'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use g_autoptr for the hash table and remove the 'ret' variable.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The parsers for the backing store strings are relatively self-contained
and rather massive piece of code. Move them to a new module called
storage_source_backingstore.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
There are no other files using it. Move it and make the functions
static.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Rename the function to virStorageSourceFetchRelativeBackingPath and
return relative paths only. The function is only used to restore the
relative relationship between images so there's no need for it to be
universal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move it together with virStorageSourceGetRelativeBackingPath which is
the main reason why it exists. Upcoming patch will modify the comment
and arguments refering to virStorageSourceGetRelativeBackingPath so it's
better if they are together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As explained in QEMU commit 4c257911dcc7c4189768e9651755c849ce9db4e8
intel-pt features should never be included in the CPU models as it was
not supported by KVM back then and even once it started to be supported,
users have to enable it by passing pt_mode=1 parameter to kvm_intel
module. The Icelake-* CPU models with intel-pt included were added to
QEMU 3.1.0 and removed right in the following 4.0.0 release (and even in
3.1.1 maintenance release).
In libvirt 6.10.0 I introduced 'removed' attribute for features included
in our CPU model definitions which we can use to drop intel-pt from
Icelake-* CPU models. Back then I explained we can safely do so only for
features which could never be enabled, which is not the case of intel-pt.
Theoretically, it could be possible to create an environment in which
QEMU would enable intel-pt without asking for it explicitly: it would
need to use a new enough kernel (not available at the time of QEMU
3.1.0) and pt_mode KVM parameter in combination with QEMU 3.1.0 running
a domain with q35 machine type and all that on a CPU which didn't really
exist at that time.
Migrating such domain to a host with newer SW stack including libvirt
with this patch applied would result in incompatible guest ABI (the
virtual CPU would lose intel-pt). However, QEMU changed its CPU models
unconditionally and thus migration would not work even without this
patch. That said, it is safe to follow QEMU and remove the feature from
Icelake-* CPU models in our cpu_map.
https://bugzilla.redhat.com/show_bug.cgi?id=1853972
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Tim Wiederhake <twiederh@redhat.com>
dtrace invokes the C compiler, so when cross-building we need
to make sure that $CC is set in the environment and that it
points to the cross-compiler rather than the native one.
Until https://github.com/mesonbuild/meson/issues/266
is addressed, the workaround is to call dtrace via env(1).
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=980334
Signed-off-by: Helmut Grohne <helmut@subdivi.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virPCIGetNetName is used to get the name of the netdev associated with
a particular PCI device. This is used when we have a VF name, but need
the PF name in order to send a netlink command (e.g. in order to
get/set the MAC address of the VF).
In simple cases there is a single netdev associated with any PCI
device, so it is easy to figure out the PF netdev for a VF - just look
for the PCI device that has the VF listed in its "virtfns" directory;
the only name in the "net" subdirectory of that PCI device's sysfs
directory is the PF netdev that is upstream of the VF in question.
In some cases there can be more than one netdev in a PCI device's net
directory though. In the past, the only case of this was for SR-IOV
NICs that could have multiple PF's per PCI device. In this case, all
PF netdevs associated with a PCI address would be listed in the "net"
subdirectory of the PCI device's directory in sysfs. At the same time,
all VF netdevs and all PF netdevs have a phys_port_id in their sysfs,
so the way to learn the correct PF netdev for a particular VF netdev
is to search through the list of devices in the net subdirectory of
the PF's PCI device, looking for the one netdev with a "phys_port_id"
matching that of the VF netdev.
But starting in kernel 5.8, the NVIDIA Mellanox driver began linking
the VFs' representor netdevs to the PF PCI address [1], and so the VF
representor netdevs would also show up in the net
subdirectory. However, all of the devices that do so also only have a
single PF netdev for any given PCI address.
This means that the net directory of the PCI device can still hold
multiple net devices, but only one of them will be the PF netdev (the
others are VF representors):
$ ls '/sys/bus/pci/devices/0000:82:00.0/net'
ens1f0 eth0 eth1
In this case the way to find the PF device is to look at the
"phys_port_name" attribute of each netdev in sysfs. All PF devices
have a phys_port_name matching a particular regex
(p[0-9]+$)|(p[0-9]+s[0-9]+$)
Since there can only be one PF in the entire list of devices, once we
match that regex, we've found the PF netdev.
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git/
commit/?id=123f0f53dd64b67e34142485fe866a8a581f12f1
Co-Authored-by: Moshe Levi <moshele@nvidia.com>
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Adrian Chiris <adrianc@nvidia.com>
Reviewed-by: Laine Stump <laine@redhat.com>
This commit add virNetDevGetPhysPortName to read netdevice
phys_port_name from sysfs. It also refactor the code so
virNetDevGetPhysPortName and virNetDevGetPhysPortID will use
same method to read the netdevice sysfs.
Signed-off-by: Moshe Levi <moshele@nvidia.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Fixes a memory leak when hypervCreateInvokeParamsList() fails.
Signed-off-by: Matt Coleman <matt@datto.com>
Reviewed-by: Laine Stump <laine@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code handles XML bits and internal definition and should be
in conf directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Same as virStorageFileBackend, it doesn't belong into util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
It's used only by storage file code so it doesn't make sense to have
it in util directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Up until now we had a runtime code and XML related code in the same
source file inside util directory.
This patch takes the runtime part and extracts it into the new
storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This code is not directly relevant to virStorageSource so move it to
separate file.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce a new storage_file directory where we will keep storage file
related code. Add a backend prefix to the file name to separate it from
other future files with 'storage_file' prefix.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This will allow following patches to move virStorageSource into conf
directory and virStorageDriverData into a new storage_file directory.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
These files are using functions from virstoragefile.h but are missing
explicit include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
