Set up the types for the block pull functions and insert them into the
virDriver structure definition. Symbols are exported in this patch to prevent
documentation compile failures.
* include/libvirt/libvirt.h.in: new API
* src/driver.h: add the new entry to the driver structure
* python/generator.py: fix compiler errors, the actual python bindings are
implemented later
* src/libvirt_public.syms: export symbols
Signed-off-by: Adam Litke <agl@us.ibm.com>
Add public virDomainSendKey() and enum libvirt_keycode_set
for the @codeset.
Python version of virDomainSendKey() has not been implemented yet,
it will be done soon.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This patch deprecates following enums:
VIR_DOMAIN_MEM_CURRENT
VIR_DOMAIN_MEM_LIVE
VIR_DOMAIN_MEM_CONFIG
VIR_DOMAIN_VCPU_LIVE
VIR_DOMAIN_VCPU_CONFIG
VIR_DOMAIN_DEVICE_MODIFY_CURRENT
VIR_DOMAIN_DEVICE_MODIFY_LIVE
VIR_DOMAIN_DEVICE_MODIFY_CONFIG
And modify internal codes to use virDomainModificationImpact.
Detected by Coverity. cpumap was allocated with a value of
(unsigned short)*(int), which is an int computation, and then
promotes to size_t. On a 64-bit platform, this fails if bit
32 of the product is set (because of sign extension giving
a HUGE value to malloc), even though a naive programmer would
assume that since the first value is unsigned, the product
is also unsigned and at most 4GB would be allocated.
Won't bite in practice (the product should never be that large),
but worth using the right types to begin with, so that we are
now computing (unsigned short)*(size_t).
* python/libvirt-override.c (libvirt_virDomainGetVcpus): Use
correct type.
This introduces a new domain
VIR_DOMAIN_EVENT_ID_CONTROL_ERROR
Which uses the existing generic callback
typedef void (*virConnectDomainEventGenericCallback)(virConnectPtr conn,
virDomainPtr dom,
void *opaque);
This event is intended to be emitted when there is a failure in
some part of the domain virtualization system. Whether the domain
continues to run/exist after the failure is an implementation
detail specific to the hypervisor.
The idea is that with some types of failure, hypervisors may
prefer to leave the domain running in a "degraded" mode of
operation. For example, if something goes wrong with the QEMU
monitor, it is possible to leave the guest OS running quite
happily. The mgmt app will simply loose the ability todo various
tasks. The mgmt app can then choose how/when to deal with the
failure that occured.
* daemon/remote.c: Dispatch of new event
* examples/domain-events/events-c/event-test.c: Demo catch
of event
* include/libvirt/libvirt.h.in: Define event ID and callback
* src/conf/domain_event.c, src/conf/domain_event.h: Internal
event handling
* src/remote/remote_driver.c: Receipt of new event from daemon
* src/remote/remote_protocol.x: Wire protocol for new event
* src/remote_protocol-structs: add new event for checks
If we can choose live or config when setting, then we need to
be able to choose which one we are querying.
Also, make the documentation clear that set must use a non-empty
subset (some of the hypervisors fail if params is NULL).
* include/libvirt/libvirt.h.in
(virDomainGetSchedulerParametersFlags): New prototype.
* src/libvirt.c (virDomainGetSchedulerParametersFlags): Implement
it.
* src/libvirt_public.syms: Export it.
* python/generator.py (skip_impl): Don't auto-generate.
* src/driver.h (virDrvDomainGetSchedulerParametersFlags): New
callback.
Commit 824dcaff was a regression (thankfully unreleased) for any
client code that used 'struct _virSchedParameter' directly rather
than the preferred virSchedParameter typedef. Adding a #define
avoids even that API change, while rearranging the file makes it
clear what the old vs. new API is.
* include/libvirt/libvirt.h.in: Rearrange older names to the
bottom and improve documentation on preferred names.
(virDomainGetSchedulerParameters, virDomainSetSchedulerParameters)
(virDomainSetSchedulerParametersFlags)
(virDomainSetBlkioParameters, virDomainGetBlkioParameters)
(virDomainSetMemoryParameters, virDomainGetMemoryParameters):
Use newer type names.
* python/libvirt-override.c: Adjust code generation to cope.
Suggested by Daniel P. Berrange.
py_str() function call PyString_AsString(). As written in documentation,
the caller must not free the returned value, because it points to some
internal structures.
The new type is identical to the three old types that it replaces,
and by creating a common type, this allows future patches to share
common code that manipulates typed parameters.
This change is backwards-compatible in API (recompilation works
without any edits) and ABI (an older client that has not been
recompiled uses the same layout) for code using only public
names; only code using private names (those beginning with _)
will have to adapt.
* include/libvirt/libvirt.h.in (virTypedParameterType)
(VIR_TYPED_PARAM_FIELD_LENGTH, _virTypedParameter): New enum,
macro, and type.
(virSchedParameter, virBlkioParameter, virMemoryParameter):
Rewrite in terms of a common type, while keeping all old public
names for backwards compatibility.
(struct _virSchedParameter, struct _virBlkioParameter)
(struct _virMemoryParameter): Delete - these are private names.
* python/generator.py (enum): Cope with the refactoring.
This partially reverts (and fixes that part in a different way) commit
e4384459c9, which replaced
``/usr/bin/python'' with ``/usr/bin/env python'' in all examples or
scripts used during build to generate other files.
However, python bindings module is compiled and linked against a
specific python discovered or explicitly provided in configure phase.
Thus libvirt.py, which is generated and installed into the system,
should use the same python binary for which the module has been built.
The hunk in Makefile.am replaces $(srcdir) with $(PYTHON), which might
seem wrong but it is not. generator.py didn't use any of its command
line arguments so passing $(srcdir) to it was redundant.
On Fedore 14, virt-manager spews a bunch of warnings to the console:
/usr/lib64/python2.7/site-packages/libvirt.py:1781: PendingDeprecationWarning: The CObject type is marked Pending Deprecation in Python 2.7. Please use capsule objects instead.
Have libvirt use the capsule API if available. I've verified this compiles
fine on older python (2.6 in RHEL6 which doesn't have capsules), and
virt-manager seems to function fine.
This is more flexible regarding the location of the python binary
but doesn't allow to pass the -u flag. The -i flag can be passed
from inside the script using the PYTHONINSPECT env variable.
This fixes a problem with the esx_vi_generator.py on FreeBSD.
Add proper documentation to the new VIR_DOMAIN_MEMORY_* macros in
libvirt.h.in to placate apibuild.py.
Mark args as unused in for libvirt_virDomain{Get,Set}MemoryParameters
in the Python bindings and add both to the libvirtMethods array.
Update remote_protocol-structs to placate make syntax-check.
Undo unintended modifications in vboxDomainGetInfo.
Update the function table of the VirtualBox and XenAPI drivers.
This patch adds a structure virMemoryParameter, it contains the name of
the
parameter and the type of the parameter along with a union.
dv:
+ rename enums to VIR_DOMAIN_MEMORY_PARAM_*
+ remove some extraneous tabs
v4:
+ Add unsigned int flags to the public api for future extensions
v3:
+ Protoype for virDomainGetMemoryParameters and dummy python binding.
v2:
+ Includes dummy python bindings for the library to build cleanly.
+ Define string constants like "hard_limit", etc.
+ re-order this patch.
When the last callback is removed using domainEventDeregister(), the
events dispatcher is deregistered from the C-library, but
domainEventsCallbacks is still an empty list.
On shutdown __del__() deregisters the dispatacher again, which SEGVs
# You need the event-loop implementation from the Python examples;
# give the file a name which is importable by Python.
ln examples/domain-events/events-python/event-test.py eloop.py
python -c 'from eloop import *
import sys
def dump(*args): print " ".join(map(str, args))
virEventLoopPureStart()
c = libvirt.open("xen:///")
c.domainEventRegister(dump, None)
c.domainEventDeregister(dump)
sys.exit(0)'
domainEventDeregister() needs to delete domainEventCallbacks so subsequent
calls to __del__() and domainEventRegister() choose the right code paths.
Setting it to None is not enough, since calling domainEventRegiser() again
would trigger an TypeError.
Signed-off-by: Philipp Hahn <hahn@univention.de>
A missing return statement in the python binding meant that
the callers could not get the callback ID, and thus not be
able to unregister event callbacks
* python/libvirt-override-virConnect.py: Add missing return
statement
The IO error callback was forgetting to pass the action
parameter, causing a stack trace when IO errors arrive
* python/libvirt-override-virConnect.py: Add missing action
parameter in IO error callback
Probably a copy-paste-bug in python/libvirt-override-api.xml:
virStorageVolGetInfo() extracts information about a "storage volume",
not the "storage pool" as virStoragePoolGetInfo() does.
Signed-off-by: Philipp Hahn <hahn@univention.de>
This involved a few fixes. To start with,
an virDomainSnapshot object is really tied to a
domain, not a connection, so we have to generate
a slightly different object so that we can get
at self._dom for the object.
Next, we had to "dummy" up an override piece of
XML with a bogus argument that the function doesn't
actually take. That's so that the generator places
virDomainRevertToSnapshot underneath the correct
class (namely, the virDomain class).
Finally, we had to hand-implement the
virDomainRevertToSnapshot implementation, ignoring the
bogus pointer we are being passed.
With all of this in place, I was able to successfully
take a snapshot and revert to it using only the
Python bindings.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR_REASON
This event is the same as the previous VIR_DOMAIN_ID_IO_ERROR
event, but also includes a string describing the cause of
the event.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorReasonCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
const char *reason,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This binds the virDomainGetBlockInfo API to python's blockInfo
method on the domain object
>>> c = libvirt.openReadOnly('qemu:///session')
>>> d = c.lookupByName('demo')
>>> f = d.blockInfo("/dev/loop0", 0)
>>> print f
[1048576000L, 104857600L, 104857600L]
* python/libvirt-override-api.xml: Define override signature
* python/generator.py: Skip C impl generator for virDomainGetBlockInfo
* python/libvirt-override.c: Manual impl of virDomainGetBlockInfo
libvirt.c and libvirt.h are auto-generated files. Mentioning their names
in *_SOURCES includes them in the distribution. During an out-of-tree
build these shipped files are included instead of the auto-generated
version, potentially breaking the build (as it happend in 0.8.0, because
the shipped libvirt.h was missing the declaration for
'libvirt_virDomainUpdateDeviceFlags')
Use the nodist_*_SOURCES automake variable instead.
Signed-off-by: Philipp Hahn <hahn@univention.de>
The generator code was totally wrong for the virDomainSnapshot
APIs, not generating the wrapper class, and giving methods the
wrong names
* generator.py: Set metadata for virDomainSnapshot type & APIs
* libvirt-override-api.xml, libvirt-override.c: Hand-code the
virDomainSnapshotListNames glue layer
In a couple of cases typos meant we were firing the wrong type
of event. In the python code my previous commit accidentally
missed some chunks of the code.
* python/libvirt-override-virConnect.py: Add missing python glue
accidentally left out of previous commit
* src/conf/domain_event.c, src/qemu/qemu_monitor_json.c: Fix typos
in event name / method name to invoke
The generator was disabled for the new event callbacks, since they
need to be hand written. This patch adds the C and python glue to
expose the new APIs in the python binding. The python example
program is extended to demonstrate of the code
* python/libvirt-override.c: Registration and dispatch of events
at the C layer
* python/libvirt-override-virConnect.py: Python glue for events
* examples/domain-events/events-python/event-test.py: Demo use
of new event callbacks
This patch implements the core driver and provides
- management functionality for managing the filter XMLs
- compiling the internal filter representation into ebtables rules
- applying ebtables rules on a network (tap,macvtap) interface
- tearing down ebtables rules that were applied on behalf of an
interface
- updating of filters while VMs are running and causing the firewalls to
be rebuilt
- other bits and pieces
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This introduces a new event type
VIR_DOMAIN_EVENT_ID_GRAPHICS
The same event can be emitted in 3 scenarios
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_CONNECT = 0,
VIR_DOMAIN_EVENT_GRAPHICS_INITIALIZE,
VIR_DOMAIN_EVENT_GRAPHICS_DISCONNECT,
} virDomainEventGraphicsPhase;
Connect/disconnect are triggered at socket accept/close.
The initialize phase is immediately after the protocol
setup and authentication has completed. ie when the
client is authorized and about to start interacting with
the graphical desktop
This event comes with *a lot* of potential information
- IP address, port & address family of client
- IP address, port & address family of server
- Authentication scheme (arbitrary string)
- Authenticated subject identity. A subject may have
multiple identities with some authentication schemes.
For example, vencrypt+sasl results in a x509dname
and saslUsername identities.
This results in a very complicated callback :-(
typedef enum {
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV4,
VIR_DOMAIN_EVENT_GRAPHICS_ADDRESS_IPV6,
} virDomainEventGraphicsAddressType;
struct _virDomainEventGraphicsAddress {
int family;
const char *node;
const char *service;
};
typedef struct _virDomainEventGraphicsAddress virDomainEventGraphicsAddress;
typedef virDomainEventGraphicsAddress *virDomainEventGraphicsAddressPtr;
struct _virDomainEventGraphicsSubject {
int nidentity;
struct {
const char *type;
const char *name;
} *identities;
};
typedef struct _virDomainEventGraphicsSubject virDomainEventGraphicsSubject;
typedef virDomainEventGraphicsSubject *virDomainEventGraphicsSubjectPtr;
typedef void (*virConnectDomainEventGraphicsCallback)(virConnectPtr conn,
virDomainPtr dom,
int phase,
virDomainEventGraphicsAddressPtr local,
virDomainEventGraphicsAddressPtr remote,
const char *authScheme,
virDomainEventGraphicsSubjectPtr subject,
void *opaque);
The wire protocol is similarly complex
struct remote_domain_event_graphics_address {
int family;
remote_nonnull_string node;
remote_nonnull_string service;
};
const REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX = 20;
struct remote_domain_event_graphics_identity {
remote_nonnull_string type;
remote_nonnull_string name;
};
struct remote_domain_event_graphics_msg {
remote_nonnull_domain dom;
int phase;
remote_domain_event_graphics_address local;
remote_domain_event_graphics_address remote;
remote_nonnull_string authScheme;
remote_domain_event_graphics_identity subject<REMOTE_DOMAIN_EVENT_GRAPHICS_IDENTITY_MAX>;
};
This is currently implemented in QEMU for the VNC graphics
protocol, but designed to be usable with SPICE graphics in
the future too.
* daemon/remote.c: Dispatch graphics events to client
* examples/domain-events/events-c/event-test.c: Watch for
graphics events
* include/libvirt/libvirt.h.in: Define new graphics event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle graphics events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for VNC events and emit a libvirt graphics event
* src/remote/remote_driver.c: Receive and dispatch graphics
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
graphics events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for VNC_CONNECTED,
VNC_INITIALIZED & VNC_DISCONNETED events from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_IO_ERROR
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_IO_ERROR_NONE = 0,
VIR_DOMAIN_EVENT_IO_ERROR_PAUSE,
VIR_DOMAIN_EVENT_IO_ERROR_REPORT,
} virDomainEventIOErrorAction;
In addition it has the source path of the disk that had the
error and its unique device alias. It does not include the
target device name (/dev/sda), since this would preclude
triggering IO errors from other file backed devices (eg
serial ports connected to a file)
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventIOErrorCallback)(virConnectPtr conn,
virDomainPtr dom,
const char *srcPath,
const char *devAlias,
int action,
void *opaque);
This is currently wired up to the QEMU block IO error events
* daemon/remote.c: Dispatch IO error events to client
* examples/domain-events/events-c/event-test.c: Watch for
IO error events
* include/libvirt/libvirt.h.in: Define new IO error event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle IO error events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for block IO errors and emit a libvirt IO error event
* src/remote/remote_driver.c: Receive and dispatch IO error
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
IO error events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for BLOCK_IO_ERROR event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_WATCHDOG
This event includes the action that is about to be taken
as a result of the watchdog triggering
typedef enum {
VIR_DOMAIN_EVENT_WATCHDOG_NONE = 0,
VIR_DOMAIN_EVENT_WATCHDOG_PAUSE,
VIR_DOMAIN_EVENT_WATCHDOG_RESET,
VIR_DOMAIN_EVENT_WATCHDOG_POWEROFF,
VIR_DOMAIN_EVENT_WATCHDOG_SHUTDOWN,
VIR_DOMAIN_EVENT_WATCHDOG_DEBUG,
} virDomainEventWatchdogAction;
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventWatchdogCallback)(virConnectPtr conn,
virDomainPtr dom,
int action,
void *opaque);
* daemon/remote.c: Dispatch watchdog events to client
* examples/domain-events/events-c/event-test.c: Watch for
watchdog events
* include/libvirt/libvirt.h.in: Define new watchdg event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle watchdog events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for watchdogs and emit a libvirt watchdog event
* src/remote/remote_driver.c: Receive and dispatch watchdog
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
watchdog events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for WATCHDOG event
from QEMU monitor
This introduces a new event type
VIR_DOMAIN_EVENT_ID_RTC_CHANGE
This event includes the new UTC offset measured in seconds.
Thus there is a new callback definition for this event type
typedef void (*virConnectDomainEventRTCChangeCallback)(virConnectPtr conn,
virDomainPtr dom,
long long utcoffset,
void *opaque);
If the guest XML configuration for the <clock> is set to
offset='variable', then the XML will automatically be
updated with the new UTC offset value. This ensures that
during migration/save/restore the new offset is preserved.
* daemon/remote.c: Dispatch RTC change events to client
* examples/domain-events/events-c/event-test.c: Watch for
RTC change events
* include/libvirt/libvirt.h.in: Define new RTC change event ID
and callback signature
* src/conf/domain_event.c, src/conf/domain_event.h,
src/libvirt_private.syms: Extend API to handle RTC change events
* src/qemu/qemu_driver.c: Connect to the QEMU monitor event
for RTC changes and emit a libvirt RTC change event
* src/remote/remote_driver.c: Receive and dispatch RTC change
events to application
* src/remote/remote_protocol.x: Wire protocol definition for
RTC change events
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c: Watch for RTC_CHANGE event
from QEMU monitor
The current API for domain events has a number of problems
- Only allows for domain lifecycle change events
- Does not allow the same callback to be registered multiple times
- Does not allow filtering of events to a specific domain
This introduces a new more general purpose domain events API
typedef enum {
VIR_DOMAIN_EVENT_ID_LIFECYCLE = 0, /* virConnectDomainEventCallback */
...more events later..
}
int virConnectDomainEventRegisterAny(virConnectPtr conn,
virDomainPtr dom, /* Optional, to filter */
int eventID,
virConnectDomainEventGenericCallback cb,
void *opaque,
virFreeCallback freecb);
int virConnectDomainEventDeregisterAny(virConnectPtr conn,
int callbackID);
Since different event types can received different data in the callback,
the API is defined with a generic callback. Specific events will each
have a custom signature for their callback. Thus when registering an
event it is neccessary to cast the callback to the generic signature
eg
int myDomainEventCallback(virConnectPtr conn,
virDomainPtr dom,
int event,
int detail,
void *opaque)
{
...
}
virConnectDomainEventRegisterAny(conn, NULL,
VIR_DOMAIN_EVENT_ID_LIFECYCLE,
VIR_DOMAIN_EVENT_CALLBACK(myDomainEventCallback)
NULL, NULL);
The VIR_DOMAIN_EVENT_CALLBACK() macro simply does a "bad" cast
to the generic signature
* include/libvirt/libvirt.h.in: Define new APIs for registering
domain events
* src/driver.h: Internal driver entry points for new events APIs
* src/libvirt.c: Wire up public API to driver API for events APIs
* src/libvirt_public.syms: Export new APIs
* src/esx/esx_driver.c, src/lxc/lxc_driver.c, src/opennebula/one_driver.c,
src/openvz/openvz_driver.c, src/phyp/phyp_driver.c,
src/qemu/qemu_driver.c, src/remote/remote_driver.c,
src/test/test_driver.c, src/uml/uml_driver.c,
src/vbox/vbox_tmpl.c, src/xen/xen_driver.c,
src/xenapi/xenapi_driver.c: Stub out new API entries
According to:
http://libvirt.org/html/libvirt-libvirt.html#virNetworkLookupByUUID
virNetworkLookupByUUID() expects a virConnectPtr as its first argument,
thus making it a method of the virConnect Python class.
Currently it's a method of libvirt.virNetwork.
@@ -805,13 +805,6 @@ class virNetwork:
if ret == -1: raise libvirtError ('virNetworkGetAutostart() failed', net=self)
return ret
- def networkLookupByUUID(self, uuid):
- """Try to lookup a network on the given hypervisor based on its UUID. """
- ret = libvirtmod.virNetworkLookupByUUID(self._o, uuid)
- if ret is None:raise libvirtError('virNetworkLookupByUUID() failed', net=self)
- __tmp = virNetwork(self, _obj=ret)
- return __tmp
-
class virInterface:
def __init__(self, conn, _obj=None):
self._conn = conn
@@ -1689,6 +1682,13 @@ class virConnect:
__tmp = virDomain(self,_obj=ret)
return __tmp
+ def networkLookupByUUID(self, uuid):
+ """Try to lookup a network on the given hypervisor based on its UUID. """
+ ret = libvirtmod.virNetworkLookupByUUID(self._o, uuid)
+ if ret is None:raise libvirtError('virNetworkLookupByUUID() failed', conn=self)
+ __tmp = virNetwork(self, _obj=ret)
+ return __tmp
+
Introduce a new public API that provides a way to get progress
info on currently running jobs on a virDomainpPtr. APIs that
are initially within scope of this idea are
virDomainMigrate
virDomainMigrateToURI
virDomainSave
virDomainRestore
virDomainCoreDump
These all take a potentially long time and benefit from monitoring.
The virDomainJobInfo struct allows for various pieces of information
to be reported
- Percentage completion
- Time
- Overall data
- Guest memory data
- Guest disk/file data
* include/libvirt/libvirt.h.in: Add virDomainGetJobInfo
* python/generator.py, python/libvirt-override-api.xml,
python/libvirt-override.c: Override for virDomainGetJobInfo API
* python/typewrappers.c, python/typewrappers.h: Introduce wrapper
for unsigned long long type
The recent commit to implement a python version of this function
didn't drop an explicit 'ignore' check in the generator, so this
never ended up in the bindings.
adds a new python API call for retrieving the running
hypervisor version used by a connection: virConnectGetVersion
* python/generator.py: skip virConnectGetVersion from autogenerated
* python/libvirt-override-api.xml python/libvirt-override.c: define
direct native bindings
The latter is not officially "wrong", but *is* terribly anachronistic.
I think automake documentation or comments call that syntax obsolescent.
* cfg.mk (_makefile_at_at_check_exceptions): Exempt @SCHEMADIR@
and @SYSCONFDIR@ uses -- there are no Makefile variables for those.
* docs/Makefile.am: Use $(INSTALL), not @INSTALL@.
* examples/dominfo/Makefile.am: Similar.
* examples/domsuspend/Makefile.am: Similar.
* proxy/Makefile.am: Similar.
* python/Makefile.am: Similar.
* python/tests/Makefile.am: Similar.
* src/Makefile.am: Similar.
* tests/Makefile.am: Similar.
Enable virDomainMemoryStats in the python API. dom.memoryStats() will return a
dictionary containing the supported statistics. A dictionary is required
because the meaining of each quantity cannot be inferred from its index in a
list.
* python/generator.py: reenable bindings for this entry point
* python/libvirt-override-api.xml python/libvirt-override.c: the
generator can't handle this new function, add the new binding,
and the XML description
Set up the types for the domainMemoryStats function and insert it into the
virDriver structure definition. Because of static initializers, update
every driver and set the new field to NULL.
* include/libvirt/libvirt.h.in: new API
* src/driver.h src/*/*_driver.c src/vbox/vbox_tmpl.c: add the new
entry to the driver structure
* python/generator.py: fix compiler errors, the actual python binding is
implemented later
Commit 66137344fe changed the Python detection
mechanism in configure to use AM_PATH_PYTHON. This results in a changed
install location for the Python bindings, at least on Fedora 12 64bit systems.
Before this commit libvirt.py and libvirtmod.so were installed to
/usr/lib64/python2.6/site-packages
After this commit they are installed to
/usr/lib/python2.6/site-packages
Mixed Python packages (containing *.py and *.so files) should be installed to
the pyexecdir directory detected by AM_PATH_PYTHON.
This restores the install location from before the AM_PATH_PYTHON commit.
* configure.in: remove unnecessary pythondir export
* python/Makefile.am: switch from pythondir to pyexecdir
Using AM_PATH_PYTHON solves the site-packages directory problem. At least
in Ubuntu with Python 2.6 and later site-packages is renamed to dist-packages
and site-packages is not part of sys.path anymore. So installing the libvirt
Python bindings to site-packages renders them unusable, because they can be
imported from there without manually including site-packages into sys.path.
AM_PATH_PYTHON detects the correct site-packages/dist-packages directory.
python-config --includes gives the correct include path for the Python header
files. The old probing code stays there as fallback mechanism.
* configure.in: use AM_PATH_PYTHON and python-config
* python/Makefile.am: remove -I because PYTHON_INCLUDES contains it now
* libvirt-override.c: Add many missing calls to allow threading
when entering C code, otherwise python blocks & then deadlocks
when we have an async event to dispatch back into python code.
Fix return value check for virDomainPinVcpu binding.
* python/generator.py python/libvirt-override-api.xml
python/libvirt-override.c: implement the bindings for
virConnectListInterfaces() and virConnectListDefinedInterfaces()
There is currently no way to determine the libvirt version of a remote
libvirtd we are connected to. This is a useful piece of data to enable
feature detection.
suggested by danpb on irc, patch by danken fixed for proper C syntax
* python/libvirt-override.c: on event callback release the python
interpreter lock and take it again when coming back so that the
callback can reinvoke libvirt.
A mistake in the generator was causing virInterface methods to be generated
with unpredicatable names ('ceUndefine', instead of just 'undefine'). This
fixes the method names to match existing convention.
Does anyone care if we are breaking API compat? My guess is that no one is
using the python interface bindings yet.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
The API docs explictly warn that we shouldn't use the C vir*GetConnect calls
in bindings: doing so can close the internal connection pointer and cause
things to get screwy. Implement these calls in python.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
A special case in the generator wasn't doing its job, and duplicate
conn.createXML functions were being generated. The bindings diff is:
@@ -1079,14 +1079,6 @@ class virConnect:
return __tmp
def createXML(self, xmlDesc, flags):
- """Create a new device on the VM host machine, for example,
- virtual HBAs created using vport_create. """
- ret = libvirtmod.virNodeDeviceCreateXML(self._o, xmlDesc, flags)
- if ret is None:raise libvirtError('virNodeDeviceCreateXML() failed', conn=self)
- __tmp = virNodeDevice(self, _obj=ret)
- return __tmp
-
- def createXML(self, xmlDesc, flags):
"""Launch a new guest domain, based on an XML description
similar to the one returned by virDomainGetXMLDesc() This
function may requires privileged access to the hypervisor.
@@ -1327,6 +1319,14 @@ class virConnect:
__tmp = virNetwork(self, _obj=ret)
return __tmp
+ def nodeDeviceCreateXML(self, xmlDesc, flags):
+ """Create a new device on the VM host machine, for example,
+ virtual HBAs created using vport_create. """
+ ret = libvirtmod.virNodeDeviceCreateXML(self._o, xmlDesc, flags)
+ if ret is None:raise libvirtError('virNodeDeviceCreateXML() failed', conn=self)
+ __tmp = virNodeDevice(self, _obj=ret)
+ return __tmp
+
def nodeDeviceLookupByName(self, name):
"""Lookup a node device by its name. """
ret = libvirtmod.virNodeDeviceLookupByName(self._o, name)
Signed-off-by: Cole Robinson <crobinso@redhat.com>
xmllib has been deprecated since python 2.0, and running the generator throws
a warning. Move to using xml.sax
Signed-off-by: Cole Robinson <crobinso@redhat.com>
FastParser uses sgmlop, a non-standard python module meant as a replacement
for xmllib (which is deprecated since python 2.0). Fedora doesn't even carry
this module, and the generator doesn't have high performance requirements, so
just rip the code out.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
* include/libvirt/libvirt.h.in: Public API contract for
virStreamPtr object
* src/libvirt_public.syms: Export data stream APIs
* src/libvirt_private.syms: Export internal helper APIs
* src/libvirt.c: Data stream API driver dispatch
* src/datatypes.h, src/datatypes.c: Internal helpers for virStreamPtr
object
* src/driver.h: Define internal driver API for streams
* .x-sc_avoid_write: Ignore src/libvirt.c because it trips
up on comments including write()
* python/Makefile.am: Add libvirt-override-virStream.py
* python/generator.py: Add rules for virStreamPtr class
* python/typewrappers.h, python/typewrappers.c: Wrapper
for virStreamPtr
* docs/libvirt-api.xml, docs/libvirt-refs.xml: Regenerate
with new APIs
The python method help docs are copied across from the C
funtion comments, but in the process all line breaks and
indentation was being lost. This made the resulting text
and code examples completely unreadable. Both the API
doc extractor and the python generator were destroying
whitespace & this fixes them to preserve it exactly.
* docs/apibuild.py: Preserve all whitespace when extracting
function comments. Print function comment inside a <?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
Given code like: T *var = calloc (n, sizeof (T));
Convert to this: T *var = calloc (n, sizeof (*var));
This first-cut change adjusts all malloc, calloc, and
realloc statements.
The only binary differences are in remote_internal.c
(due to the bug fix) and in xmlrpc.c (due to factorization).
* python/libvir.c: As above.
* qemud/event.c: Likewise.
* qemud/mdns.c: Likewise.
* qemud/qemud.c: Likewise.
* qemud/remote.c: Likewise.
* src/bridge.c: Likewise.
* src/buf.c: Likewise.
* src/conf.c: Likewise.
* src/hash.c: Likewise.
* src/iptables.c: Likewise.
* src/openvz_conf.c: Likewise.
* src/qemu_conf.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/test.c: Likewise.
* src/xen_internal.c: Likewise.
* src/xen_unified.c: Likewise.
* src/xm_internal.c: Likewise.
* src/xml.c: Likewise.
* tests/qemuxml2argvtest.c: Likewise.
* src/xmlrpc.c (xmlRpcValuePtr): Likewise, and minor factorization.
* src/remote_internal.c (remoteAuthMakeCredentials): Use the right
type when allocating space for an array of cred _pointers_.
* python/libvir.c, python/libvirt_wrap.h, qemud/qemud.c,
qemud/remote.c, src/internal.h, src/openvz_conf.c,
src/openvz_driver.c, src/proxy_internal.h, src/qemu_conf.c,
src/qemu_driver.c, src/remote_internal.h, src/test.h, src/util.c,
src/xen_unified.c, src/xen_unified.h, tests/nodeinfotest.c,
tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c, tests/reconnect.c,
tests/sexpr2xmltest.c, tests/virshtest.c, tests/xencapstest.c,
tests/xmconfigtest.c, tests/xml2sexprtest.c:
Change #include <> to #include "" for local includes.
Removed many includes from src/internal.h and put them in
the C files which actually use them.
Removed <ansidecl.h> - unused.
Added a comment around __func__.
Removed a clashing redefinition of VERSION symbol.
All limits (PATH_MAX etc) now done in src/internal.h, so we
don't need to include those headers in other files.
* python/libvir.c, python/libvir.py: Make Python aware that
the C bindings module is called cygvirtmod.dll when compiled
by CYGWIN.
* python/Makefile.am: Remove symlink libvirtmod.dll -> cygvirtmod.dll
no longer necessary because of the above.
* configure.in: Remove AM_CONDITIONAL(CYGWIN).
* configure.in: Added CYGWIN_EXTRA_LDFLAGS, CYGWIN_EXTRA_LIBADD,
CYGWIN_EXTRA_PYTHON_LIBADD, CYGWIN automake conditional.
* src/Makefile.am: Extra flags required to build DLL of libvirt
for Cygwin.
* python/Makefile.am: Extra flags and rule required to build
Python module for Cygwin.
* Makefile.am: Expand some "*" wildcards, and (for now) disable
the relatively unimportant, distuninstallcheck target.
Fix a few redirect-directly-to-target bugs.
Add a few $(srcdir)/ prefixes and add an uninstall-local rule.
* docs/Makefile.am: More of the same. Split some long lines.
* python/Makefile.am: Likewise.
* python/tests/Makefile.am: Likewise.
* qemud/Makefile.am: Likewise.
* tests/Makefile.am: Remove the directories already listed in SUBDIRS.
* docs/examples/index.py: Adapt to produce the desired changes in
docs/examples/Makefile.am. Also, sort *.c, so results are reproducible,
and emit a comment telling emacs and vi that the file is read-only.
* docs/examples/Makefile.am: Regenerate.
Author: Jim Meyering <meyering@redhat.com>
* src/remote_internal.c, python/Makefile.am: Python bindings
fixed, and now building virConnect.getHostname and
virConnect.getURI. Fixed a problem which stopped
libvirt.py from being (re-)built. Rearranged
python/Makefile.am to make it cleaner and clearer.
* include/libvirt/libvirt.h.in, src/libvirt.c, src/libvirt_sym.version,
python/generator.py: Added virDomainGetConnect and
virNetworkGetConnect to allow us to get the "hidden"
connection associated with each domain or network.
+
+ * python/generator.py, python/libvir.c, python/libvir.py:
+ Wrap the virGetVersion call as Python libvirt.getVersion.
+
+ * src/libvirt.c: Change virGetVersion so that the driver name
+ is case insensitive.
+
* acinclude.m4: add LIBVIRT_COMPILE_WARNINGS, copied from
GNOME but with a few more flags we'd been using.
* configure.in: use that instead of setting CFLAGS
directly.
* proxy/Makefile.am, python/Makefile.am, qemud/Makefile.am,
src/Makefile.am, tests/Makefile.am: use $(WARN_CFLAGS)
include/libvirt/virterror.h python/generator.py python/libvir.c
python/libvirt_wrap.h src/driver.h src/internal.h src/test.h
src/virsh.c src/virterror.c src/xend_internal.c src/xend_internal.h
src/xml.c src/xml.h: moved the includes from include/ to
include/libvirt to reflect the installed include tree. This
avoid using "" in the includes themselves.
Daniel
src/internal.h src/libvirt_sym.version src/xen_internal.c
src/xs_internal.c: added a new entry point to get node hardware
informations virGetNodeInfo, and associated driver hook.
* src/xend_internal.c: implemented the node and version information
hooks for the Xen Daemon
* python/libvir.c python/libvirt-python-api.xml python/generator.py:
also added Python bindings for the new call
Daniel
* src/libvirt_sym.version: add initialize entry point
* src/libvirt.c: make sure we always initialize the lib
* python/tests/*.py: start updating exemple for exception
handling as pointed by Jim Meyering
Daniel
src/virterror.c: created a new module related to Xen Store accesses
* src/libvirt.c src/xen_internal.[ch] src/xend_internal.[ch]:
nearly completed the separation of the code from the different modules
Daniel
* python/Makefile.am python/generator.py python/libvir.c
python/libvir.py: improved python binding, raise exception
when an instance creation or lookup fails, and add support
for the global error handler, per conn handler still needed
* python/tests/error.py python/tests/Makefile.am: adding a
regression test
Daniel
* python/generator.py python/libvir.c python/libvirt-python-api.xml:
also fixing the binding for getting a domain UUID
* python/tests/Makefile.am python/tests/uuid.py: added a test
for the new UUID API
Daniel
* python/tests/Makefile.am: fix a small PYTHONPATH bug
* docs//*: fixed the xsl a bit for toc names, added doc for
the python bindings, regenerated
Daniel
docs/site.xsl: integates the examples page in the web site
* docs//* : fixed generator and rebuilt the docs
* python/tests/basic.py python/tests/create.py: couple cleanups
Daniel
difficult since it requires a system image
* src/libvirt.c src/xend_internal.c: fixed the shutdown API which
was broken due to a bad reason at the xend level.
Daniel
* include/libvirt.h* src/libvirt.c src/xend_internal.[ch]
src/xml.[ch]: added XML parsing for Xen domain descriptions
needed for creates, plugged in a converter to s-exp and
xend call. Modified the virDomainCreateLinux() to reflect
that XML based description. Seems to work.
* python/tests/create.py: added a test case which seems to work
not tested much yet
* docs/*: regenerated
Daniel
version for python bindings, heavilly based on libxml2/libxslt
way of doing things, maybe this need to be revisited. Added packaging
too.
* src/hash.h: fixed the Copyright notice.
Daniel
