Commit Graph

49 Commits

Author SHA1 Message Date
Daniel P. Berrangé
600462834f Remove all Author(s): lines from source file headers
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-13 16:08:38 +00:00
Jim Fehlig
0a1b565382 xenconfig: add support for openvswitch configuration
Add support for converting openvswitch interface configuration
to/from libvirt domXML and xl.cfg(5). The xl config syntax for
virtual interfaces is described in detail in the
xl-network-configuration(5) man page. The Xen Networking wiki
also contains information and examples for using openvswitch
in xl.cfg config format

https://wiki.xenproject.org/wiki/Xen_Networking#Open_vSwitch

Tests are added to check conversions of openvswitch tagged and
trunked VLAN configuration.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
ACKed-by: Michal Privoznik <mprivozn@redhat.com>
2018-12-06 15:05:16 -07:00
Marek Marczykowski-Górecki
6262ea7148 xenconfig: add support for type="pvh"
Handle PVH domain type in both directions (xen-xl->xml, xml->xen-xl).
And add a test for it.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2018-11-26 16:38:26 -07:00
Marek Marczykowski-Górecki
494fa1fd1b xenconfig: add support for parsing type= xl config entry
builder="hvm" is deprecated since Xen 4.10, new syntax is type="hvm" (or
type="pv", which is default). Since the old one is still supported,
still use it when writing native config, so the config will work on
older Xen too (and will also not complicate tests).

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2018-11-26 16:34:55 -07:00
Erik Skultety
5165ff0971 src: More cleanup of some system headers already contained in internal.h
All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:39 +02:00
Erik Skultety
9403b63102 internal: Move <stdio.h> include to internal.h
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
2018-09-20 10:16:38 +02:00
David Kiarie
d894e49292 xenconfig: remove my name and email from files
Remove my name and email from these files

Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: David Kiarie <davidkiarie4@gmail.com>
2018-05-08 13:45:51 +01:00
Marek Marczykowski-Górecki
c961b59abc tests: add test case for CPUID in xenconfig driver
Check conversion of "cpuid" setting, check all supported policy settings
("1", "0", "x"). Also, check interaction with "nestedhvm" - should not
be included as "vmx=1" in "cpuid" setting.

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-04-17 21:15:27 -06:00
Marek Marczykowski-Górecki
984c534a3f tests: add test for multiple IPs for libxl and xenconfig driver
Test conversion of multiple IP addresses to/from xl format and
domXML. Also test libxl_domain_config generator handling of
multiple IP addresses.

Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2017-12-08 14:04:57 -07:00
Wim ten Have
22098a49b9 xlconfigtest: add tests for vNUMA configuration
Add tests for conversion of domXML vNUMA config to/from
xen-xl native vNUMA config.

Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2017-11-12 19:39:24 -07:00
Andrea Bolognani
3e7db8d3e8 Remove backslash alignment attempts
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.

Generated using

  $ git grep -El '[[:blank:]][[:blank:]]\\$' | \
    grep -E '*\.([chx]|am|mk)$$' | \
    while read f; do \
      sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
    done

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2017-11-03 13:24:12 +01:00
Ján Tomko
e9f3222705 introduce virConfReadString
Rewrite virConfReadMem to take a null-terminated string.
All the callers were calling strlen on it anyway.
2017-08-08 12:19:17 +02:00
Michal Privoznik
4f0aeed871 virDomainXMLOption: Introduce virDomainABIStabilityDomain
While checking for ABI stability, drivers might pose additional
checks that are not valid for general case. For instance, qemu
driver might check some memory backing attributes because of how
qemu works. But those attributes may work well in other drivers.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-06-05 09:08:52 +02:00
Wim ten Have
5ade0ff905 xlconfigtest: add tests for 'nestedhvm' support
Testing various configuration schemas targeting postive and negative
nestedhvm under libvirt <cpu mode="host-passthrough"> configuration.

Mode "host-passthrough" generates nestedhvm=1 in/from xl format where

Intel virtualization (VT-x):
<feature policy='disable' name='vmx'/>

    or

AMD virtualization (AMD-V):
<feature policy='disable' name='svm'/>

disables virtualization mode under guest domains.

Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2017-04-27 15:05:44 -06:00
Andrea Bolognani
4ceac4bf29 tests: Rename VIRT_TEST_* macros to VIR_TEST_*
We use the "vir" prefix pretty consistently in our
APIs, both external and internal, which made these
macros stood out.
2017-04-04 17:30:03 +02:00
Jim Fehlig
d397092591 tests: add xlconfig tests for <timer> configurations 2017-01-24 16:18:13 -07:00
Cédric Bosdonnat
9cae9c886b xen: add QED format test
Follow up of commit 340bb6b7 to add unit tests for the QED format
support. Also add missing QED case in xenFormatXLDisk()
2016-12-21 15:06:40 +01:00
Joao Martins
bff2f781ab xlconfigtest: add test for channel conversion
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Acked-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-09-27 15:15:03 -06:00
Michal Privoznik
c41b989112 virDomainDefParse{File,String}: Introduce @parseOpaque argument
We want to pass the proper opaque pointer instead of NULL to
virDomainDefParse and subsequently virDomainDefParseNode too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-09-26 16:50:12 +02:00
Bob Liu
b43f5e63d2 xlconfigdata: add tests for multi serial
Adding tests for domXML <-> xl.cfg conversions containing multiple
serial devices.

Signed-off-by: Bob Liu <bob.liu@oracle.com>
2016-09-02 12:46:02 -06:00
Chunyan Liu
9a361bbba8 xenconfig: add conversion of usb controller config to and from xml
libxl configuration files conversion can now handle USB controllers.
When parting libxl config file, USB controllers with type PV are
ignored as those aren't handled.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
2016-08-02 14:02:21 +02:00
Chunyan Liu
6fcaf4a547 xlconfigtest: add test for USB config conversion
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-06-14 14:34:50 -06:00
Jim Fehlig
53d98ccea7 xenconfig: support bios=ovmf xl.cfg
Add support to xenconfig for conversion of xl.cfg(5) bios config
to/from libvirt domXml <loader> config. SeaBIOS is the default
for HVM guests using upstream QEMU. ROMBIOS is the default when
using the old qemu-dm. This patch allows specifying OVMF as an
alternate firmware.

Example xl.cfg:
  bios = "ovmf"

Example domXML:
  <os>
    ...
    <loader readonly='yes' type='pflash'>/usr/lib/xen/boot/ovmf.bin</loader>
  </os>

Note that currently Xen does not support a separate nvram for
non-volatile variables.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-06-13 14:13:17 -06:00
Tomáš Ryšavý
239caffb1d tests: Rename virtTestCompareToFile to virTestCompareToFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
401bb813bd Rename virtTestLoadFile to virTestLoadFile.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Tomáš Ryšavý
cd7dd1508d tests: Rename virtTestRun to virTestRun.
This function doesn't follow our convention of naming functions.
2016-06-08 11:23:12 -04:00
Chunyan Liu
c4111209b8 xlconfigtest: add test case for type=vif in xl format
Signed-off-by: Chunyan Liu <cyliu@suse.com>
2016-05-17 14:09:11 -06:00
Jim Fehlig
4c9ffc5388 xenconfig: change 'hap' setting to align with Xen behavior
hap is enabled by default in xm and xl config and usually only
specified when it is desirable to disable hap (hap = 0). Change
the xm,xl <-> xml converter to behave similarly. I.e. only
produce 'hap = 0' when <hap state='off'/> and vice versa.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-03-21 09:28:17 -06:00
Jim Fehlig
6604a3dd9f xenconfig: support xl<->xml conversion of rbd disk devices
The target= setting in xl disk configuration can be used to encode
meta info that is meaningful to a backend. Leverage this fact to
support qdisk network disk types such as rbd. E.g. <disk> config
such as

   <disk type='network' device='disk'>
     <driver name='qemu' type='raw'/>
     <source protocol='rbd' name='pool/image'>
       <host name='mon1.example.org' port='6321'/>
       <host name='mon2.example.org' port='6322'/>
       <host name='mon3.example.org' port='6322'/>
     </source>
     <target dev='hdb' bus='ide'/>
     <address type='drive' controller='0' bus='0' target='0' unit='1'/>
   </disk>

can be converted to the following xl config (and vice versa)

  disk = [ "format=raw,vdev=hdb,access=rw,backendtype=qdisk,
            target=rbd:pool/image:auth_supported=none:mon_host=mon1.example.org\\:6321\\;mon2.example.org\\:6322\\;mon3.example.org\\:6322"
         ]

Note that in xl disk config, a literal backslash in target= must
be escaped with a backslash. Conversion of <auth> config is not
handled in this patch, but can be done in a follow-up patch.

Also add a test for the conversions.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-02-22 11:46:50 -07:00
Jim Fehlig
a44f1f85f9 xenconfig: produce key=value disk config syntax in xl formatter
The most formal form of xl disk configuration uses key=value
syntax to define each configuration item, e.g.

format=raw, vdev=xvda, access=rw, backendtype=phy, target=disksrc

Change the xl disk formatter to produce this syntax, which allows
target= to contain meta info needed to setup a network-based
disksrc (e.g. rbd, nbd, iscsi). For details on xl disk config
format, see  $xen-src/docs/misc/xl-disk-configuration.txt

Update the disk config in the tests to use the formal syntax.
But add tests to ensure disks specified with the positional
parameter syntax are correctly converted to <disk> XML.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-02-22 11:46:50 -07:00
Jim Fehlig
8910ceaf1b xenconfig: replace text 'xm' with 'xl' in xlconfigtest
While at it, improve a few comments. No functional change.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-02-22 11:46:50 -07:00
Joao Martins
d239a5427f conf: add caps to virDomainDefFormat*
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
2016-02-04 12:38:26 +00:00
Ian Campbell
daeace5c5d libxl: Support cmdline= in xl config files
... and consolidate the cmdline/extra/root parsing to facilitate doing
so.

The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).

On the formatting side switch to producing cmdline= instead of extra=.

Update a few tests and add serveral more.
  - test-cmdline is added to test the exclusive use of cmdline.
  - test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
    on the formatting side and now tests the exclusive use of cmdline=.
  - Tests are added for both paravirt and fullvirt where the .cfg uses
    extra= and (paravirt only) root=. These are format (xl->xml) only
    since the inverse will generate cmdline= hence is not a round trip
    (which was already true if using root=, which used to generate
    extra= on the way back).
  - Tests are added for both paravirt and fullvirt where the .cfg
    declares cmdline= as well as bogus extra= and (paravirt only) root=
    entries which should be ignored. Again these are format only tests
    since the inverse won't include the bogus lines.

The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.

In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
2016-01-21 10:48:44 -07:00
Jim Fehlig
ec63000a62 xenconfig: support vif bandwidth in xm and xl parser and formatter
Both xm and xl config have long supported specifying vif rate
limiting, e.g.

vif = [ 'mac=00:16:3E:74:3d:76,bridge=br0,rate=10MB/s' ]

Add support for mapping rate to and from <bandwidth> in the xenconfig
parser and formatter. rate is mapped to the required 'average' attribute
of the <outbound> element, e.g.

  <interface type='bridge'>
    ...
    <bandwidth>
      <outbound average='10240'/>
    </bandwidth>
  </interface>

Also add a unit test to check the conversion logic.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2016-01-08 18:56:00 -07:00
Jim Fehlig
5b74103b0b Xen: support maxvcpus in xm and xl config
From: Ian Campbell <ian.campbell@citrix.com>

xend prior to 4.0 understands vcpus as maxvcpus and vcpu_avail
as a bit map of which cpus are online (default is all).

xend from 4.0 onwards understands maxvcpus as maxvcpus and
vcpus as the number which are online (from 0..N-1). The
upstream commit (68a94cf528e6 "xm: Add maxvcpus support")
claims that if maxvcpus is omitted then the old behaviour
(i.e. obeying vcpu_avail) is retained, but AFAICT it was not,
in this case vcpu==maxcpus==online cpus. This is good for us
because handling anything else would be fiddly.

This patch changes parsing of the virDomainDef maxvcpus and vcpus
entries to use the corresponding 'maxvcpus' and 'vcpus' settings
from xm and xl config. It also drops use of the old Xen 3.x
'vcpu_avail' setting.

The change also removes the maxvcpus limit of MAX_VIRT_VCPUS (since
maxvcpus is simply a count, not a bit mask), which is particularly
crucial on ARM where MAX_VIRT_CPUS == 1 (since all guests are
expected to support vcpu placement, and therefore only the boot
vcpu's info lives in the shared info page).

Existing tests adjusted accordingly, and new tests added for the
'maxvcpus' setting.
2015-12-18 17:52:00 -07:00
Jim Fehlig
7d7c08be1c Xen: xenconfig: remove xendConfigVersion from public functions
Remove use of xendConfigVersion in the xm and xl config formatter/parsers
in src/xenconfig/. Adjust callers in the xen and libxl drivers accordingly.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Jim Fehlig
9e6d721985 Xen: tests: use latest XEND_CONFIG_VERSION in xm/xl tests
Change all tests to use the latest XEND_CONFIG_VERSION
(XEND_CONFIG_VERSION_3_1_0 = 4). Fix tests that do not conform to
the latest version.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-12-17 21:22:33 -07:00
Pavel Hrdina
91a00424db xen: use virDomainDefPostParse for parsing XM/XL/SEXPR cofings
This change ensures to call driver specific post-parse code to modify
domain definition after parsing hypervisor config the same way we do
after parsing XML.

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2015-12-09 12:59:21 +01:00
Jim Fehlig
a5b55bd931 xenconfig: fix spice mousemode and copypaste
From xl.cfg950 man page:

spiceagent_mouse=BOOLEAN
Whether SPICE agent is used for client mouse mode. The default is
true (1) (turn on)

spicevdagent=BOOLEAN
Enables spice vdagent. The Spice vdagent is an optional component for
enhancing user experience and performing guest-oriented management
tasks. Its features includes: client mouse mode (no need to grab
mouse by client, no mouse lag), automatic adjustment of screen
resolution, copy and paste (text and image) between client and domU.
It also requires vdagent service installed on domU o.s. to work.
The default is 0.

spice_clipboard_sharing=BOOLEAN
Enables Spice clipboard sharing (copy/paste). It requires spicevdagent
enabled. The default is false (0).

So if spiceagent_mouse is enabled (client mouse mode) or
spice_clipboard_sharing is enabled, spicevdagent must be enabled.
Along with this change, s/spicedvagent/spicevdagent, set
spiceagent_mouse correctly, and add a test for these spice
features.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-05-18 12:46:16 -06:00
Cole Robinson
ca32929908 tests: Add virtTestCompareToFile
Replaces a common pattern used in many test files
2015-04-23 17:08:48 -04:00
Cole Robinson
bdbe26b504 tests: Use *DefParseFile more 2015-04-23 17:08:48 -04:00
Cole Robinson
835cf84b7e domain: conf: Drop expectedVirtTypes
This needs to specified in way too many places for a simple validation
check. The ostype/arch/virttype validation checks later in
DomainDefParseXML should catch most of the cases that this was covering.
2015-04-20 16:43:43 -04:00
Jim Fehlig
13e2c22099 libxl: support HVM direct kernel boot
Add support for HVM direct kernel boot in libxl.  Also add a
test to verify domXML <-> native conversions.

Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-04-16 16:14:51 -06:00
Ján Tomko
b84c5729d9 Fix xlconfigtest with older libxl
Commit cd5dc30 added this test, but it fails if
LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST is not defined:

6) Xen XM-2-XML Format fullvirt-multiusb
... libvirt:  error : unsupported configuration: multiple USB
devices not supported
FAILED
2015-04-02 15:11:43 +02:00
Marek Marczykowski-Górecki
e1bfa03a83 tests: xenconfig: test for multiple USB devices and other HVM options
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
2015-03-13 12:00:50 -06:00
Jim Fehlig
e274d5882e tests: fix xlconfigtest build failure
When libvirt is configured --without-xen, building the xlconfigtest
fails with

  CCLD   xlconfigtest
  /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../x86_64-linux-gnu/crt1.o
  In function `_start': (.text+0x20): undefined reference to `main'
  collect2: error: ld returned 1 exit status

Introduced in commit 4ed5fb91 by too much copy and paste from
xmconfigtest.
2015-01-20 21:03:09 -07:00
Kiarie Kahurani
4ed5fb9193 tests: Tests for the xen-xl parser
Add disk and spice config tests for the xen_xl config parser

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-14 08:28:50 -07:00
Jim Fehlig
cb4befc748 Revert "tests: Tests for the xen-xl parser"
This reverts commit 6b818d3b09.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-12 10:15:09 -07:00
Kiarie Kahurani
6b818d3b09 tests: Tests for the xen-xl parser
add tests for the xen_xl config parser

Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
2015-01-03 22:41:26 -07:00