Provide the ability to specify a default timeout value for
successful completion of openvswitch calls in the libvirtd
configuration file.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add a "tls_priority" config option to /etc/libvirt/libvirtd.conf
to allow the administrator to override the built-in default
setting. This only affects the server side configuration.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Daemon config parameter switch between reading host uuid
either from smbios or machine-id:
host_uuid_source = "smbios|machine-id"
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Commit 1199edb1d4 added config option max_queued_clients and documented the
default value as 1000 but never actually set that value. This patch sets the
default value.
This addresses an issue whereby the following error message is reported if too
many migrations are started simultaneously:
error: End of file while reading data: Ncat: Invalid argument.: Input/output error
The problem is that too many ncat processes are spawned on the destination
system. They all attempt to connect to the libvirt socket. Because the
destination libvirtd cannot respond to the connect requests quickly enough we
overrun the socket's pending connections queue.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work. It just effectively disables all incoming
connections. That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive. Thus, according to the server,
no client supports keepalive.
Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet. And that won't happen until after we dispatched
the ConnectOpen call.
Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is not going to be very widely used, but for some corner cases and
easier (unsafe) debugging, it might be nice.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1160995
In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.
The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=992980
This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This configuration knob lets user to set the length of queue of
connection requests waiting to be accept()-ed by the daemon. IOW, it
just controls the @backlog passed to listen:
int listen(int sockfd, int backlog);
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Commit id 'ed3bac71' introduced the following:
TEST: libvirtdconftest
........................................ 40 OK
==25875== 690 (480 direct, 210 indirect) bytes in 30 blocks are definitely lost in loss record 18 of 24
==25875== at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25875== by 0x4C737DF: virAllocN (viralloc.c:152)
==25875== by 0x403BC8: remoteConfigGetStringList (libvirtd-config.c:74)
==25875== by 0x4042CF: daemonConfigLoadOptions (libvirtd-config.c:382)
==25875== by 0x4052F5: daemonConfigLoadData (libvirtd-config.c:479)
==25875== by 0x40222C: testCorrupt (libvirtdconftest.c:112)
==25875== by 0x40321F: virtTestRun (testutils.c:158)
==25875== by 0x401FEE: mymain (libvirtdconftest.c:228)
==25875== by 0x40385A: virtTestMain (testutils.c:722)
==25875== by 0x37C1021A04: (below main) (libc-start.c:225)
==25875==
PASS: libvirtdconftest
Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.
This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.
Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.
* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/; If/. If/
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)
You should have received a copy of the GNU General Public License
along with Foobar. If not, see <http://www.gnu.org/licenses/>.
This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').
Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:
src/security/security_selinux.h
src/security/security_driver.h
src/security/security_selinux.c
src/security/security_apparmor.h
src/security/security_apparmor.c
src/security/security_driver.c
Update the libvirtd config handling code to use virReportError
instead of the virConfError custom macro
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory
These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html
This offers a number of advantages:
* Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
* Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
* Supports performing smart or selective migration of settings
between different OS versions
* Supports reseting settings without breaking things
* Makes it possible to clear cache data to make room when the disk
is filling up
* Allows us to write a robust and efficient backup solution
* Allows an admin flexibility to change where data and settings are stored
* Dramatically reduces the complexity and incoherence of the
system for administrators
* daemon/libvirtd-config.c (daemonConfigFree): fix memory leaks.
How to reproduce?
% make && make -C tests check TESTS=libvirtdconftest
% cd tests && valgrind -v --leak-check=full ./libvirtdconftest
actual result:
==11008== 185 bytes in 5 blocks are definitely lost in loss record 3 of 5
==11008== at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==11008== by 0x39CF07F6E1: strdup (strdup.c:43)
==11008== by 0x406626: daemonConfigLoadOptions (libvirtd-config.c:438)
==11008== by 0x406800: daemonConfigLoadData (libvirtd-config.c:492)
==11008== by 0x403CCF: testCorrupt (libvirtdconftest.c:110)
==11008== by 0x404FAD: virtTestRun (testutils.c:145)
==11008== by 0x403A34: mymain (libvirtdconftest.c:219)
==11008== by 0x404687: virtTestMain (testutils.c:700)
==11008== by 0x39CF01ECDC: (below main) (libc-start.c:226)
==11008==
==11008== LEAK SUMMARY:
==11008== definitely lost: 185 bytes in 5 blocks
Signed-off-by: Alex Jia <ajia@redhat.com>
Rename existing daemonConfigLoad API to daemonConfigLoadFile and
add an alternative daemonConfigLoadData
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Add
daemonConfigLoadData and rename daemonConfigLoad to
daemonConfigLoadFile
* daemon/libvirtd.c: Update for renamed API
To enable creation of unit tests, split the libvirtd config file
loading code out into separate files.
* daemon/libvirtd.c: Delete config loading code / structs
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Config
file loading APIs
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
