Commit Graph

14 Commits

Author SHA1 Message Date
Martin Kletzander
0c56d94318 tools: Fix connect command
The man page says: "(Re)-Connect to the hypervisor. When the shell is
first started, this is automatically run with the URI parameter
requested by the "-c" option on the command line."  However, if you run:

  virsh -c 'test://default' 'connect; uri'

the output will not be 'test://default'.  That's because the 'connect'
command does not care about any virsh-only related settings and if it is
run without parameters, it connects with @uri == NULL.  Not only that
doesn't comply to what the man page describes, but it also doesn't make
sense.  It also means you aren't able to reconnect to whatever you are
connected currently.

So let's fix that in both virsh and virt-admin add a test case for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2016-05-02 07:18:25 +02:00
Eric Blake
041f7c9304 tests: avoid realpath in test-lib.sh
Ever since commit ace4aecd, running 'make check' on RHEL 6 produces:

./test-lib.sh: line 21: realpath: command not found

for every shell script test, because 'realpath' was not part of
coreutils back then.

* tests/test-lib.sh (_scriptdir): Compute with only portable shell.

Signed-off-by: Eric Blake <eblake@redhat.com>
2016-02-01 13:03:28 -07:00
Cole Robinson
ace4aecd5e tests: Fix running schematests directly from topdir
Previously it failed like:

$ ./tests/domainschematest
./tests/domainschematest: line 4: ./test-lib.sh: No such file or directory
2016-01-08 21:21:34 -05:00
Wei Jiangang
28a72d65ca tests: make redirects happen in correct order
It should redirect stdout to /dev/null first,
then redirect stderr to whatever stdout currently points at.

Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com>
2015-10-14 13:10:38 +02:00
Martin Kletzander
38716772d0 test-lib: Make case skipping possible 2013-09-13 10:25:56 +02:00
Eric Blake
38d4bf49a0 tests: add helper to determine when to skip expensive tests
The logic set up in previous patch for exposing VIR_TEST_EXPENSIVE
to individual tests is as follows:

make check VIR_TEST_EXPENSIVE=0   => getenv("VIR_TEST_EXPENSIVE") sees "0"
make check VIR_TEST_EXPENSIVE=1   => getenv("VIR_TEST_EXPENSIVE") sees "1"
make check                        => getenv("VIR_TEST_EXPENSIVE") sees
either "0" or "1", based on configure options
cd tests; ./FOOtest               => getenv("VIR_TEST_EXPENSIVE") sees
whatever is in your environment (usually NULL, but possibly garbage)

Merely checking if VIR_TEST_EXPENSIVE is set in the environment
does the wrong thing; likewise, it is unsafe to assume the
variable will always contain a valid number.

As such, it helps to have helper functions, instead of making each
expensive test repeat the probe of the environment.

* tests/testutils.h (virTestGetExpensive): New prototype.
* tests/testutils.c (virTestGetExpensive): Implement it.
* tests/test-lib.sh (very_expensive_): Rename...
(test_expensive): ...and tweak to use VIR_TEST_EXPENSIVE.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-08-12 10:06:41 -06:00
Eric Blake
9693e29395 tests: simplify formatting
The shell version would output 40 extra spaces for a test with
a multiple of 40 sub-tests, and the C version can use the same
printf optimization for avoiding a loop over single space output
as the shell version.

* tests/testutils.c (virtTestMain): Avoid loop for alignment.
* tests/test-lib.sh: Fix formatting when counter is multiple of 40.
2011-07-11 09:21:37 -06:00
Matthias Bolte
b1c9bf27cb tests: Fix compressed test output padding logic
The current logic tries to count from 1 to 40 and ignores paddings
of 0 and 1 to 40. This doesn't work for counter + 1 mod 40 == 0
like here for counter value 159

TEST: virsh-all
      ........................................ 40
      ........................................ 80
      ........................................ 120
      ....................................... 159 OK
PASS: virsh-all

Also seq isn't portable. Therefore, calculate the correct padding
length directly and use printf to output it at once.
2011-07-09 15:40:23 +02:00
Eric Blake
e07cf19fe5 build: don't use "test cond1 -o cond2": it's not portable
* configure.ac: Use "test cond1 || test cond2" instead.
* m4/compiler-flags.m4 (gl_COMPILER_FLAGS): Likewise.
* tests/test-lib.sh (verbose): Likewise.
2010-03-25 09:28:24 +01:00
Jim Meyering
ca7db6cb80 tests: shell script portability and clean-up
* tests/test-lib.sh: "echo -n" is not portable.  Use printf instead.
Remove unnecessary uses of "eval-in-subshell" (subshell is sufficient).
Remove uses of tests' -a operator; it is not portable.
Instead, use "test cond && test cond2".
* tests/schematestutils.sh: Replace use of test's -a.
2010-03-24 09:23:01 +01:00
Matthias Bolte
8a7783c163 tests: Don't add extra padding if counter mod 40 is 0
This change only affects the output of tests that have an exact
multiple of 40 test cases. For example the domainschematest currently:

TEST: domainschematest
      ........................................ 40
      ........................................ 80
      ........................................ 120
      ........................................ 160
      ........................................                                         200 OK
PASS: domainschematest

It outputs additional 40 spaces on the last line.

The domainschematest output is fixed by the change in test-lib.sh. The
change in testutils.c fixes this for tests written in C. Currently no
C test has an exact multiple of 40 test cases, but I checked it and
the same problem exists there.

This patch stops that in both cases.
2010-03-24 01:07:57 +01:00
Daniel P. Berrange
e8ac4a79f1 Make test suite output less verbose
Only print out '.' for each test case, full test output can be
re-enabled with VIR_TEST_VERBOSE=1, or VIR_TEST_DEBUG=XXXX

Sample output now looks like

  TEST: statstest
        ........................................ 40
        ...................................      75  OK
  PASS: statstest
  TEST: qparamtest
        ................................         32  OK
  PASS: qparamtest
  TEST:
        ............                             12  OK
2010-01-15 16:28:05 +00:00
Jim Meyering
3ce465f819 Don't fail to read a file because it's non-seekable (e.g., a pipe).
* src/util.c (fread_file_lim): New function.
(__virFileReadAll): Use fread_file_lim, rather than requiring
that stat.st_size provide a usable file size.
* tests/read-non-seekable: New test, for the above.
* tests/Makefile.am (test_scripts): Add read-non-seekable.
* tests/test-lib.sh (mkfifo_or_skip_): New helper function.
2008-04-08 15:33:16 +00:00
Jim Meyering
f15efcdf27 Add new testing framework and the first test to use it.
* tests/Makefile.am (test_scripts): Add vcpupin.
(EXTRA_DIST): Add test-lib.sh.
* tests/test-lib.sh: Testing framework, from coreutils.
* tests/vcpupin: New file.
* build-aux/mktempd: New file, from gnulib.
* bootstrap: Add posix-shell and mktempd to the list of imported modules.
* gnulib/m4/posix-shell.m4: New file, from gnulib.
2008-03-24 10:19:36 +00:00