Move all bits of the formatting of the 'backing' attribute to a single
condition and make it use a single extracted copy of the backing store.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since libvirt stores the backing chain into the XML in a nested way it
is the prime possibility to hit libxml2's parsing limit of 256 layers.
Introduce code which will crawl the backing chain and verify that it's
not too deep. The maximum nesting is set to 200 layers so that there's
still some space left for additional properties or nesting into snapshot
XMLs.
The check is applied to all disk use cases (starting, hotplug, media
change) as well as block copy which changes image and snapshots.
We simply report an error and refuse the operation.
Without this check a restart of libvirtd would result in the status XML
failing to be parsed and thus losing the VM.
https://bugzilla.redhat.com/show_bug.cgi?id=1524278
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With blockdev we must issue the block_set_io_throttle QMP command to
setup disk throttling as we currently can't do it with the 'throttle'
layer.
Unfortunately there's nothing we can do if it fails.
https://bugzilla.redhat.com/show_bug.cgi?id=1733163
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When virtlogd is used to capture QEMU's stdout, qemuDomainObjTaint would
always fail to write the message to the log file when QEMU is already
running (i.e., outside qemuProcessLaunch). This can happen during device
hotplug or by sending a custom QEMU guest agent command:
warning : qemuDomainObjTaint:8757 : Domain id=9 name='blaf'
uuid=9cfa4e37-2930-405b-bcb4-faac1829dad8 is tainted:
custom-ga-command
error : virLogHandlerDomainOpenLogFile:388 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
error : virNetClientProgramDispatchError:172 : Cannot open log file:
'/var/log/libvirt/qemu/blaf.log': Device or resource busy
The fix is easy, we just need to use the right API for appending a
message to QEMU log file instead of creating a new log context.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The 'u' modifier creates an unsigned int JSON attribute but the disk size
and capacity fields are unsigned long long. If the size of the created
image would be more than 4GiB we'd overflow and create sub-4G image.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The xenapi driver has not seen any development since its initial
contribution 9 years ago. There have been no bug reports, no patches,
and no queries about the driver on the developer or user mailing lists.
Remove the driver from the libvirt sources.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
A specially crafted XML which would reference a non-existing disk but
request the mirror to be registered with the blockjob could potentially
make the parser dereference NULL. Fix it by moving the code slightly and
just treat it as a wrong job XML. Found by Coverity.
Reported-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The (pre-copy) bandwidth was historically the only bandwidth we
supported and thus it is called just "bandwidth" in all other places.
E.g., virsh migrate-setspeed or in the migration typed parameter name.
Let's make the new option for virsh migrate consistent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
If a block job reaches failed/cancelled state, or is completed
without pivot then we must remove security driver metadata
associated to the backing chain so that we don't leave any
metadata behind.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1741456
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
When a block job is completed, the security image metadata are
moved to the new image. If this fails an warning is printed, but
the message contains only domain name and lacks image paths. Put
them both into the warning message.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Currently, there are only a few lines of code so a separate
function was not necessary, but this will change. So instead of
putting all the new code under 'case
QEMU_BLOCKJOB_TYPE_ACTIVE_COMMIT' create a separate function.
Just like every other case has one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
I guess the reason for that was the automatic interpretation/stringification of
setfilecon_errno, but the code was not nice to read and it was a bit confusing.
Also, the logs and error states get cleaner this way.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Coverity noted that 'reply' can be NULL after calling
qemuAgentCommand(). Avoid dereferencing reply in
qemuAgentErrorComandUnsupported() in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Introduced by commit <c854e0bd33c7a5afb04a36465bf04f861b2efef5> that
tried to fix an issue where we would fail to parse values from files.
We cannot change the original pointer that is going to be used by
VIR_AUTOFREE.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1747440
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
'virQEMUDriverConfigPtr cfg' is declared, initiated, but never
used in virQEMUDriverCreateCapabilities().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Christophe de Dinechin <dinechin@redhat.com>
There are some network file systems that do support XATTRs (e.g.
gluster via FUSE). And they appear to support SELinux too.
However, not really. Problem is, that it is impossible to change
SELinux label of a file stored there, and yet we claim success
(rightfully - hypervisor succeeds in opening the file). But this
creates a problem for us - from XATTR bookkeeping POV, we haven't
changed the label and thus if we remembered any label, we must
roll back and remove it.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1740506
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
This function is no longer needed because after previous commits
it's just an alias to virSecuritySELinuxSetFilecon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Now, that we don't need to remember if setting context is
'optional' (the argument only made
virSecuritySELinuxSetFileconImpl() return a different success
code), we can drop it from the _virSecuritySELinuxContextItem
structure as we don't need to remember it in transactions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There is no real difference between
virSecuritySELinuxSetFilecon() and
virSecuritySELinuxSetFileconOptional(). Drop the latter in favour
of the former.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The only thing that the @optional argument does is that it makes
the function return 1 instead of 0 if setting SELinux context
failed in a non-critical fashion. Drop the argument then and
return 1 in that case. This enables caller to learn if SELinux
context was set or not.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As qemu documents we should use everything in the 'props' sub-object of
the data returned by query-hotpluggable-cpus. Until now we only used
everything we recognized, but that may break in cases when qemu
introduces new fields.
This change requires a fix to the test data as some fields were
reordered.
https://bugzilla.redhat.com/show_bug.cgi?id=1741658
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
In addition to the data that libvirt needs and extracts internally,
copy and store the whole 'props' JSON sub-object of the data returned by
query-hotpluggable-cpus for future use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
On error paths, info_ret could potentially leak. Make sure it's freed.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
After 7cfb7aab57 commit starting a domain pullutes logs with
warnings like [1]. The reason is resource files do not
have timestamp before starting a domain and after destroying
domain the timestamp is cleared. Let's check the timestamp
only if attribute with refcounter is found.
[1] warning : virSecurityValidateTimestamp:198 : Invalid XATTR timestamp detected on \
/some/path secdriver=dac
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Use the templates at https://github.com/terinjokes/StickerConstructorSpec
to provide square and hexagon logos for libvirt, suitable for printing
as stickers.
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
It appears that all commands were originally fully in alphabetical order
but as new commands were added, they were sometimes inserted out of
order. Fix up all domain commands so that they're in alphabetical order
again.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'guestinfo' command uses the new virDomainGetGuestInfo() API to
query information about the specified domain and print it out for the
user. The output is modeled roughly on the 'domstats' command.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When we're collecting guest information, older agents may not support
all agent commands. In the case where the user requested all info
types (i.e. types == 0), ignore unsupported command errors and gather as
much information as possible. If the agent command failed for some other
reason, or if the user explciitly requested a specific info type (i.e.
types != 0), abort on the first error.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Due to a typo, some of the field names didn't have closing quotes,
the information about the hostname was omitted and there was an
empty line missing after filesystem info description (which helps
our docs generator produce better looking HTML).
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
According to HTML specification, <a name=''> works in HTML4, but
<a id=''> works in both HTML4 and HTML5. This is followed even in
docs/page.xsl where HTML bookmark links are generated only for
those anchors which have @id attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add support to specify a boot order on vfio-ccw passthrough devices.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Refactoring the method signatures in preparation for
checking boot index of the mediated devices.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Changing the error messages to report the problem encountered.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Moving the hostdev boot support validation from the command line
generator code into the domain validation code.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Adding a failure test for booting from a vhost scsi hostdev device.
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
