Up to now, we've been avoiding ctype functions like isspace, isdigit,
etc. because they are locale-dependent. Now that we have the c-ctype
functions, we can start using *them*, to make the code more readable
with changes like these:
- /* This may not work on EBCDIC. */
- if ((*p >= 'a' && *p <= 'z') ||
- (*p >= 'A' && *p <= 'Z') ||
- (*p >= '0' && *p <= '9'))
+ if (c_isalnum(*p))
- while ((*cur >= '0') && (*cur <= '9')) {
+ while (c_isdigit(*cur)) {
Also, some macros in conf.c used names that conflicted with
standard meaning of "BLANK" and "SPACE", so I've adjusted them
to be in line with the definition of e.g., isblank.
In addition, I've wrapped those statement macros with do {...} while (0),
so that we can't forget the ";" after a use. There was one like that
already (fixed below). The missing semicolon would mess up automatic
indenting.
* src/buf.c (virBufferURIEncodeString):
* src/conf.c (IS_EOL, SKIP_BLANKS_AND_EOL, SKIP_BLANKS)
(virConfParseLong, virConfParseValue, virConfParseName)
(virConfParseSeparator, virConfParseStatement, IS_BLANK, IS_CHAR)
(IS_DIGIT, IS_SPACE, SKIP_SPACES):
* src/nodeinfo.c:
* src/qemu_conf.c (qemudParseInterfaceXML):
* src/qemu_driver.c (qemudDomainBlockStats):
* src/sexpr.c:
* src/stats_linux.c:
* src/util.c (virParseNumber, virDiskNameToIndex):
* src/uuid.c (hextobin, virUUIDParse):
* src/virsh.c:
* src/xml.c (parseCpuNumber, virParseCpuSet):
Done using this command (also includes .c.in and .h.in files):
for i in $(g ls-files|grep -E '\.[ch](\.in)?$'|grep -v gnulib); do
expand -i $i > j && mv j $i;done
* docs//* src/conf.c src/hash.c src/libvirt.c src/proxy_internal.c
src/remote_internal.c src/virsh.c src/xen_internal.c
src/xend_internal.c src/xml.c: applied patch from Atsushi SAKAI
fixing a lot of typos
Daniel
Also add "make syntax-check" rules to ensure no new uses sneak in.
There are many uses of write like this:
if (write (fd, xml, towrite) != towrite)
return -1;
The problem is that the syscall can succeed, yet write less than
the requested number of bytes, so the caller should retry
rather than simply failing.
This patch changes most of them to use util.c's safewrite wrapper,
which encapsulates the process. Also, there were a few cases in
which the retry loop was open-coded, and I replaced those, too.
* Makefile.maint (sc_avoid_write): New rule, to avoid recurrence.
* .x-sc_avoid_write: New file. Record two legitimate exemptions.
* qemud/qemud.c (sig_handler, qemudClientWriteBuf): Use safewrite, not write.
* src/conf.c (__virConfWriteFile): Likewise.
* src/qemu_conf.c (qemudSaveConfig, qemudSaveNetworkConfig): Likewise.
* src/qemu_driver.c (qemudWaitForMonitor, qemudStartVMDaemon)
(qemudVMData, PROC_IP_FORWARD): Likewise.
* proxy/libvirt_proxy.c: Include "util.h".
(proxyWriteClientSocket): Use safewrite.
* src/test.c (testDomainSave, testDomainCoreDump): Likewise.
* src/proxy_internal.c (virProxyWriteClientSocket): Likewise.
* src/virsh.c: Include "util-lib.h".
(vshOutputLogFile): Use safewrite.
* src/console.c: Include "util-lib.h".
(vshRunConsole): Use safewrite.
Use <config.h>, not "config.h", per autoconf documentation.
* Makefile.cfg (local-checks-to-skip) [sc_require_config_h]: Enable.
* .x-sc_require_config_h: New file, to list exempted files.
* Makefile.am (EXTRA_DIST): Add .x-sc_require_config_h.
Given code like: T *var = calloc (n, sizeof (T));
Convert to this: T *var = calloc (n, sizeof (*var));
This first-cut change adjusts all malloc, calloc, and
realloc statements.
The only binary differences are in remote_internal.c
(due to the bug fix) and in xmlrpc.c (due to factorization).
* python/libvir.c: As above.
* qemud/event.c: Likewise.
* qemud/mdns.c: Likewise.
* qemud/qemud.c: Likewise.
* qemud/remote.c: Likewise.
* src/bridge.c: Likewise.
* src/buf.c: Likewise.
* src/conf.c: Likewise.
* src/hash.c: Likewise.
* src/iptables.c: Likewise.
* src/openvz_conf.c: Likewise.
* src/qemu_conf.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/test.c: Likewise.
* src/xen_internal.c: Likewise.
* src/xen_unified.c: Likewise.
* src/xm_internal.c: Likewise.
* src/xml.c: Likewise.
* tests/qemuxml2argvtest.c: Likewise.
* src/xmlrpc.c (xmlRpcValuePtr): Likewise, and minor factorization.
* src/remote_internal.c (remoteAuthMakeCredentials): Use the right
type when allocating space for an array of cred _pointers_.
New files go into these directories:
gnulib/lib
gnulib/m4
gnulib/tests
* bootstrap: A wrapper around gnulib-tool.
* configure.in: Invoke gl_EARLY and gl_INIT, being careful to put gl_EARLY
before any macro that uses AC_COMPILE_IFELSE.
(AC_OUTPUT): Add lib/Makefile and gl-tests/Makefile. Remove m4/Makefile.
* Makefile.am (SUBDIRS): Add gnulib/lib and remove m4. Add gnulib/tests
early enough that those tests run before any libvirt unit tests.
* m4/Makefile.am: Remove file. Not needed.
* src/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS, libvirt_la_LIBADD): Add ../gnulib/lib/libgnu.la.
* src/nodeinfo.c: Include "physmem.h".
* qemud/qemud.c, src/remote_internal.c: Include "getaddrinfo.h".
(MEMINFO_PATH, linuxNodeInfoMemPopulate): Remove definitions.
(virNodeInfoPopulate): Use physmem_total, not linuxNodeInfoMemPopulate.
* tests/Makefile.am (INCLUDES): Add -I$(top_srcdir)/gnulib/lib -I../gnulib/lib.
(LDADDS): Add ../gnulib/lib/libgnu.la.
* qemud/Makefile.am (libvirtd_LDADD): Add ../gnulib/lib/libgnu.la.
* tests/nodeinfotest.c (linuxTestCompareFiles): No longer read total
memory from a file.
Update expected output not to include "Memory: NNNN"
* tests/nodeinfodata/linux-nodeinfo-1.txt:
* tests/nodeinfodata/linux-nodeinfo-2.txt:
* tests/nodeinfodata/linux-nodeinfo-3.txt:
* tests/nodeinfodata/linux-nodeinfo-4.txt:
* tests/nodeinfodata/linux-nodeinfo-5.txt:
* tests/nodeinfodata/linux-nodeinfo-6.txt:
* src/test.c [WITH_TEST]: Remove definition of _GNU_SOURCE that
would conflict with the one now in "config.h".
* autogen.sh: Add -I gnulib/m4.
* src/conf.c, src/sexpr.c: Don't define _GNU_SOURCE.
Instead, include "config.h".
* qemud/qemud.c: Remove definition of _GNU_SOURCE.
* src/openvz_driver.c: Likewise.
* src/qemu_driver.c: Likewise.
* src/remote_internal.c: Likewise.
* configure.in: Use AC_CONFIG_AUX_DIR(build-aux), so that a bunch
of gettextize-generated files go into build-aux/, rather than in
the top-level directory.
* .cvsignore: Adjust.
* build-aux/.cvsignore: New file.
Author: Jim Meyering <meyering@redhat.com>
* tests/conftest.c: Use fwrite, not printf, since the
result buffer is not NUL-terminatedi, from Jim Meyering.
* tests/qemuxml2argvtest.c: Initialize vm.migrateFrom[0],
to avoid "read-uninitialized" error from within
qemudBuildCommandLinei, from Jim Meyering.
Daniel
* src/conf.c, src/test.c, src/xen_internal.c: Readd checking
of errors from virBuffer functions.
* src/sexpr.c: Add comment about use of _GNU_SOURCE.
* src/virsh.c: Remove use of _GNU_SOURCE / isblank.
* src/xml.c, tests/Makefile.am: Minor cleanup.
Note: potential ABI break here, but people should
only really be using virError structs returned from
libvirt itself.
* include/libvirt/virterror.h: add virNetwork
to virError
* src/internal.h, src/virterror.c: add network param
to __virRaiseError()
* src/conf.c, src/hash.c, src/libvirt.c, src/proxy_internal.c,
src/qemu_internal.c, src/sexpr.c, src/test.c, src/xen_internal.c,
src/xend_internal.c, src/xm_internal.c, src/xml.c, src/xmlrpc.c,
src/xs_internal.c: update.
* configure.in include/libvirt/virterror.h src/Makefile.am
src/conf.c src/conf.h src/virterror.c src/xen_internal.c:
adding a subset of Xen config file parser, and serializer
* tests/Makefile.am tests/conftest.c tests/test_conf.sh
tests/confdata/Makefile.am tests/confdata/fc4.conf
tests/confdata/fc4.out: adding test program for config in and out
Daniel
