In preparation to tracking which USB addresses are occupied.
Introduce two helper functions for printing the port path
as a string and appending it to a virBuffer.
We were requiring a USB port path in the schema, but not enforcing it.
Omitting the USB port would lead to libvirt formatting it as (null).
Such domain cannot be started and will disappear after libvirtd restart
(since it cannot parse back the XML).
Only format the port if it has been specified and mark it as optional
in the XML schema.
Migration to an older libvirt (pre v1.3.0-175-g7140807) is broken
because older versions of libvirt generated different channel paths and
they didn't drop the default paths when parsing domain XMLs. We'd get
such a nice error message:
internal error: process exited while connecting to monitor:
2016-07-08T15:28:02.665706Z qemu-kvm: -chardev socket,
id=charchannel0,path=/var/lib/libvirt/qemu/channel/target/
domain-3-nest/org.qemu.guest_agent.0,server,nowait: Failed to bind
socket to /var/lib/libvirt/qemu/channel/target/domain-3-nest/
org.qemu.guest_agent.0: No such file or directory
That said, we should not even format the default paths when generating a
migratable XML.
https://bugzilla.redhat.com/show_bug.cgi?id=1320470
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Playing directly with our live definition, updating it, and reverting it
back once we are done is very nice and it's quite dangerous too. Let's
just make a copy of the domain definition if needed and do all tricks on
the copy.
https://bugzilla.redhat.com/show_bug.cgi?id=1320470
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If size_t is the same size as long long, then we can skip
some of the range checks. This avoids triggering some
bogus compiler warning messages.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virConf 'l' field is a 'signed long long', so whenever
the 'type' field is VIR_CONF_ULONG, we should explicitly cast
'l' to a 'unsigned long long' before doing range checks.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This function tries to get a ssize_t value from a config file.
But before returning it, it checks whether the value would fit in
ssize_t and if not an error is printed out among with the range
for the ssize_t type. However, on some platforms SSIZE_MAX may
actually be a signed long type:
util/virconf.c: In function 'virConfGetValueSSizeT':
util/virconf.c:1268:9: error: format '%zd' expects argument of type 'signed size_t', but argument 9 has type 'long int' [-Werror=format=]
virReportError(VIR_ERR_INTERNAL_ERROR,
^
$ grep -r SSIZE_MAX /usr/include/
/usr/include/bits/posix1_lim.h:#ifndef SSIZE_MAX
/usr/include/bits/posix1_lim.h:# define SSIZE_MAX LONG_MAX
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id's 'c8438010', '9bbf0d7e', and '2552fec24' altered the documentation
to describe adding a 'passphrase' type secret usage model in order to reference
the secret for a luks volume. After commit, it was deemed that a 'volume'
usage model should be used, so adjust the various documents in order rephrase
descriptions in order to follow the correct usage model.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id's '9bbf0d7e6' and '2552fec24' added some XML parsing tests
for a LUKS volume to use a 'passphrase' secret format. After commit,
this was deemed to be incorrect, so covert the various tests to use
the volume usage format where the 'usage' is the path to the volume
rather than a user defined name string.
Also, removed the qemuxml2argv-luks-disk-cipher.xml since it was
just a duplicate of qemuxml2argv-luks-disks.xml.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit ca10bb040f introduced a new test that fails to build
on at least some architectures:
commandtest.c: In function 'test25':
commandtest.c:1121:5: error: comparison is always true due to
limited range of data type [-Werror=type-limits]
if (rv >= 0) {
^
Change the type of 'rv' from char to int, which is the proper
return type for virCommandExec() anyway.
Commit ffc49e579c broke syntax-check:
cppi: libvirt.spec.in: line 622: not properly indented
cppi: libvirt.spec.in: line 624: not properly indented
cppi: libvirt.spec.in: line 640: not properly indented
cppi: libvirt.spec.in: line 642: not properly indented
maint.mk: incorrect preprocessor indentation
cfg.mk:697: recipe for target 'sc_spec_indentation' failed
Indent the new conditionals properly.
MinGW complained that we might be dereferencing a NULL pointer. While
that can't be true, the logic certainly allows for that.
../../src/conf/domain_conf.c: In function 'virDomainDefPostParse':
../../src/conf/domain_conf.c:4224:18: error: potential null pointer dereference [-Werror=null-dereference]
if (!vcpu->online && vcpu->cpumask) {
~~~~^~~~~~~~
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The systemd-machined tools libvirt uses were split into a
systemd-container RPM. Without depending on this, libvirt
may silently fallback to the non-systemd cgroup impl which
is not desirable.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
MinGW complained that we might be dereferencing a NULL pointer. While
that can't be true, the logic certainly allows for that.
src/conf/domain_conf.c: In function 'virDomainDefGetVcpuPinInfoHelper':
src/conf/domain_conf.c:1545:17: error: potential null pointer dereference [-Werror=null-dereference]
if (vcpu->cpumask)
~~~~^~~~~~~~~
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
IPv6 RA always contains an implicit default route via
the link-local address of the source of RA. This forces
the guest to install a route via isolated network, which
may disturb the guest's networking in case of multiple interfaces.
More info in 013427e6e7.
The validity of this route is controlled by "default [route] lifetime"
field of RA. If the lifetime is set to 0 seconds, then no route
is installed by receiver.
dnsmasq 2.67+ supports "ra-param=<interface>,<RA interval>,<default
lifetime>" option. We pass "ra-param=*,0,0"
(here, RA_interval=0 means default) to disable default gateway in RA
for isolated networks.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1354238
So we spend some time and effort constructing perfect file name
for an automatic coredump of a domain, but then just leak it and
use the domain name anyway. This is probably due to a silly
mistake that slipped even through review.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
At least with systemd v210, NOTIFY_SOCKET is abstact, e.g.
@/org/freedesktop/systemd1/notify. sendmsg() fails on such a socket
with "Connection refused". The unix(7) man page contains the following
details wrt abstract socket addresses
abstract: an abstract socket address is distinguished (from a
pathname socket) by the fact that sun_path[0] is a null byte
('\0'). The socket's address in this namespace is given by the
additional bytes in sun_path that are covered by the specified
length of the address structure. (Null bytes in the name have
no special significance.)
So we need to be more precise about the address length, setting it to
the sizeof sa_family_t + length of address copied to sun_path instead
of setting it to the sizeof the entire sockaddr_un struct.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=987668
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When fetching domains with virConnectListAllDomains() and when filtering
by snapshot existence is requested the ESX driver first lists all the
domains and then check one-by-one for snapshot existence. This process
takes unnecessarily long time.
To significantly improve the time necessary to finish the query we can
request the snapshot related info directly when querying the list of
domains from VMware.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
The old 32-bit-only mingw project had a mismatch in its <sys/types.h>
that omitted ssize_t, but where size_t was a different rank than
int as picked by gnulib. But now that mingw64 (both 32- and 64-bit)
is the more popular platform (Fedora has dropped mingw in favor of
mingw64), we no longer need to carry a hack to gnulib to cater to
the old mingw. This reverts part of commit 1012dc2933.
Signed-off-by: Eric Blake <eblake@redhat.com>
We can't mock tests on Mingw, which lacks dlopen() and friends;
follow the paradigms used in other mock files of conditionally
compiling nothing when not building for Linux.
Signed-off-by: Eric Blake <eblake@redhat.com>
In an unlikely event of execve() failing, the virCommandExec()
function does not report any error, even though checks that are
at the beginning of the function are verbose when failing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The modification of .volWipe callback wipes ploop volume using one of
given wiping algorithm: dod, nnsa, etc.
However, in case of ploop volume we need to reinitialize root.hds and DiskDescriptor.xml.
v2:
- added check on ploop tools presens
- virCommandAddArgFormat changed to virCommandAddArg
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Check whether QEMU supports -device intel-iommu
Note that the presence of this option does not mean that it's
usable because of a bug in earlier QEMU versions, but it's
better than nothing.
https://bugzilla.redhat.com/show_bug.cgi?id=1235580
Commit c9c03ea stopped creating an intermediate file during syntax-check
to save on execution time. It also switched to outputting the whole
incorrectly wrapped file instead of a diff needed to fix it.
Feed the newly wrapped file to diff via a pipe.
Note that fixing it by running test-wrap-argv.pl --in-place or
the unit test with VIR_TEST_REGENERATE_OUTPUT is easier.
Commit 843a70a changed test-wrap-argv.pl to use
/usr/bin/env perl
instead of
/usr/bin/perl
However when called from qemuxml2argvtest with
VIR_TEST_REGENERATE_OUTPUT, PATH is set to '/bin'.
Find the path to perl early in virTestMain, in case we
are going to need it later after we've overridden PATH.
In commit ec5dcf2a and b0b4a35c we have moved qemuhotplugtest's XMLs to
new directories but forgot to fix the Makefile. Add 2 directories in
EXTRA_DIST to fix broken VPATH build. Also remove now unused
qemuhotplugtestdata directory from the Makefile as well as from the
tree.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently many users of virConf APIs are defining the same
macros for calling virConfValue() and then doing type
checking. To remove this repeated code, add a set of
typesafe accessor methods.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the config file does not end with a \n, the parser will append
one. When re-allocating the array though, it is mistakenly assuming
that 'len' is the length including the trailing NUL, but it does
not. So we must add 2 to len, when reallocating, not 1.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
