All of the ones being removed are pulled in by internal.h. The only
exception is sanlock which expects the application to include <stdint.h>
before sanlock's headers, because sanlock prototypes use fixed width
int, but they don't include stdint.h themselves, so we have to leave
that one in place.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
It doesn't really make sense for us to have stdlib.h and string.h but
not stdio.h in the internal.h header.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
This patch simplifies virNetDevBridgeCreate and virNetDevMacVLanCreate
functions by making use of the virNetlinkNewLink helper.
Signed-off-by: Shi Lei <shi_lei@massclouds.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOPTR macro for declaring aggregate pointer variables,
majority of the calls to *Free functions can be dropped, which
in turn leads to getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
By making use of GNU C's cleanup attribute handled by the
VIR_AUTOFREE macro for declaring scalar variables, majority
of the VIR_FREE calls can be dropped, which in turn leads to
getting rid of most of our cleanup sections.
Signed-off-by: Sukrit Bhatnagar <skrtbhtngr@gmail.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
virHostdevRestoreNetConfig() calls virNetDevReadNetConfig() to try and
read the "original config" of a netdev, and if that fails, it tries
again with a different directory/netdev name. This achieves the
desired effect (we end up finding the config wherever it may be), but
for each failure, virNetDevReadNetConfig() places a nice error message
in the system logs. Experience has shown that false-positive error
logs like this lead to erroneous bug reports, and can often mislead
those searching for *real* bugs.
This patch changes virNetDevReadNetConfig() to explicitly check if the
file exists before calling virFileReadAll(); if it doesn't exist,
virNetDevReadNetConfig() returns a success, but leaves all the
variables holding the results as NULL. (This makes sense if you define
the purpose of the function as "read a netdev's config from its config
file *if that file exists*).
To take advantage of that change, the caller,
virHostdevRestoreNetConfig() is modified to fail immediately if
virNetDevReadNetConfig() returns an error, and otherwise to try the
different directory/netdev name if adminMAC & vlan & MAC are all NULL
after the preceding attempt.
MACVTAP_NAME_PREFIX and MACVLAN_NAME_PREFIX could be useful to other
files if they were defined in virnetdevmacvlan.h instead of
virnetdevmacvlan.c, so do that (while slightly renaming them and also
adding yet another #define that chooses between macvlan/macvtap based
on flags).
This is a prerequisite to fix: https://bugzilla.redhat.com/1335798
This patch modifies the macvtap passthrough setup to use
virNetDevSaveNetConfig()+virNetDevSetConfig() instead of
virNetDevReplaceNetConfig() or virNetDevReplaceMacAddress(), and the
teardown to use virNetDevReadNetConfig()+virNetDevSetConfig() instead
of virNetDevRestoreNetConfig() or virNetDevRestoreMacAddress().
Since the older functions only saved/restored the admin MAC and vlan
tag (which is incorrect) and the new functions save/restore the VF's
own MAC address and vlan tag (correct), this actually fixes a bug
(which was introduced by commit cb3fe38c7, which was itself supposed
to be a fix for https://bugzilla.redhat.com/1113474 ).
The downside to this patch is that it causes an *apparent* regression
in that bug (because there will once again be an error reported if the
interface had previously been used for VFIO device assignment), but in
reality, the code hasn't been working for *any* case before this
current patch (at least not with any recent kernel). Anyway, that
"regression" will be fixed with an upcoming patch that fixes it the
*right* way.
vf in virNetDevMacVLanDeleteWithVPortProfile() is initialized to -1
and never set. It's not set for a good reason - because it doesn't
make sense during macvtap device setup to refer to a VF device as
"PF:VF#". This patch replaces the two uses of "vf" with "-1", and
removes the local variable, so that it's more clear we are always
calling the utility functions with vf set to -1.
Usually, this variable is used to hold the return value for a
function of ours. Well, this is not the case. Its use does not
match our pattern and therefore it is very misleading. Drop it
and define an alternative @rc variable, but only in that single
block where it is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This variable is very misleading. We use VIR_FORCE_CLOSE to set
it to -1 and returning it even though it does not refer to a FD
at all. It merely holds 0 or -1. Drop it completely. Also, at the
same time some corner cases are fixed too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1240439
In this function we create a macvtap device and open its tap
device. Possibly multiple times. Now the thing is, if opening the
tap device fails, that is virNetDevMacVLanTapOpen() returns a
negative value, we unroll all the changes BUT return 0 fooling
caller into thinking everything went okay.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
SRIOV VFs used in macvtap passthrough mode can take advantage of the
SRIOV card's transparent vlan tagging. All the code was there to set
the vlan tag, and it has been used for SRIOV VFs used for hostdev
interfaces for several years, but for some reason, the vlan tag for
macvtap passthrough devices was stubbed out with a -1.
This patch moves a bit of common validation down to a lower level
(virNetDevReplaceNetConfig()) so it is shared by hostdev and macvtap
modes, and updates the macvtap caller to actually send the vlan config
instead of -1.
After the patches that added tracking of in-use macvtap names (commit
370608, first appearing in libvirt-1.3.2), if the function to allocate
a new macvtap device came to a device name created outside libvirt, it
would retry the same device name MACVLAN_MAX_ID (8191) times before
finally giving up in failure.
The problem was that virBitmapNextClearBit was always being called
with "0" rather than the value most recently checked (which would
increment each time through the loop), so it would always return the
same id (since we dutifully release that id after failing to create a
new device using it).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1321546
Signed-off-by: Laine Stump <laine@laine.org>
In 370608b4c7 we have introduced two new internal APIs.
However, there are no stubs for build without macvtap. Therefore
build on systems lacking macvtap support (e.g. mingw or freebds)
fails when trying to link.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
libvirt always resets the MAC address of the physdev used for macvtap
passthrough when the guest is finished with it. This was happening
prior to the 802.1Qb[gh] DISASSOCIATE command, and was quite often
failing, presumably because the driver wouldn't allow the MAC address
to be reset while the association was still active, with a log message
like this:
virNetDevSetMAC:168 : Cannot set interface MAC to 00:00:00:00:00:00 on 'eth13': Cannot assign requested address
This patch changes the order - we now do the 802.1Qb[gh] disassociate
and delete the macvtap interface first, then and reset the MAC
address.
Firstly, there's a bug (or typo) in the only place where we call
this function: @multiqueue is set whenever @tapfdSize is greater
than zero, while in fact the condition should have been 'greater
than one'.
Then, secondly, since the condition depends on just one
variable, that we are even passing down to the function, we can
move the condition into the function and drop useless argument.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some older systems, e.g. RHEL-6 do not have IFF_MULTI_QUEUE flag
which we use to enable multiqueue feature. Therefore one gets the
following compile error there:
CC util/libvirt_util_la-virnetdevmacvlan.lo
util/virnetdevmacvlan.c: In function 'virNetDevMacVLanTapSetup':
util/virnetdevmacvlan.c:338: error: 'IFF_MULTI_QUEUE' undeclared (first use in this function)
util/virnetdevmacvlan.c:338: error: (Each undeclared identifier is reported only once
util/virnetdevmacvlan.c:338: error: for each function it appears in.)
make[3]: *** [util/libvirt_util_la-virnetdevmacvlan.lo] Error 1
So, whenever user wants us to enable the feature on such systems,
we will just throw a runtime error instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Like we are doing for TUN/TAP devices, we should do the same for
macvtaps. Although, it's not as critical as in that case, we
should do it for the consistency.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For the multiqueue on macvtaps we are going to need to open
the device multiple times. Currently, this is not supported.
Rework the function, so that upper layers can be reworked too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are few outdated things. Firstly, we don't need to undergo
the torture of fopen, fscanf and fclose just to get the interface
index when we have nice wrapper over that: virNetDevGetIndex.
Secondly, we don't need to have statically allocated buffer for
the path we are opening.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So yet again one of integer arguments that we use as a boolean.
Since the argument count of the function is unbearably long
enough, lets turn those booleans into flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DEBUG and VIR_WARN will automatically add a new line to the message,
having "\n" at the end or at the beginning of the message results in
empty lines.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Before libvirt sets the MAC address of the physdev (the physical
ethernet device) linked to a macvtap passthrough device, it always
saves the previous MAC address to restore when the guest is finished
(following a "leave nothing behind" policy). For a long time it
accomplished the save/restore with a combination of
ioctl(SIOCGIFHWADDR) and ioctl(SIOCSIFHWADDR), but in commit cbfe38c
(first in libvirt 1.2.15) this was changed to use netlink RTM_GETLINK
and RTM_SETLINK commands sent to the Physical Function (PF) of any
device that was detected to be a Virtual Function (VF).
We later found out that this caused problems with any devices using
the Cisco enic driver (e.g. vmfex cards) because the enic driver
hasn't implemented the function that is called to gather the
information in the IFLA_VFINFO_LIST attribute of RTM_GETLINK
(ndo_get_vf_config() for those keeping score), so we would never get
back a useful response.
In an ideal world, all drivers would implement all functions, but it
turns out that in this case we can work around this omission without
any bad side effects - since all macvtap passthrough <interface>
definitions pointing to a physdev that uses the enic driver *must*
have a <virtualport type='802.1Qbh'>, and since no other type of
ethernet devices use 802.1Qbh, libvirt can change its behavior in this
case to use the old-style. ioctl(SIOC[GS]IFHWADDR). That's what this
patch does.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1257004
commit 09778e09 switched from using ioctl(SIOCBRDELBR) for bridge
device deletion to using a netlink RTM_DELLINK message, which is the
more modern way to delete a bridge (and also doesn't require the
bridge to be ~IFF_UP to succeed). However, although older kernels
(e.g. 2.6.32, in RHEL6/CentOS6) support deleting *some* link types
with RTM_NEWLINK, they don't support deleting bridges, and there is no
compile-time way to figure this out.
This patch moves the body of the SIOCBRDELBR version of
virNetDevBridgeDelete() into a static function, calls the new function
from the original, and also calls the new function from the
RTM_DELLINK version if the RTM_DELLINK message generates an EOPNOTSUPP
error. Since RTM_DELLINK is done from the subordinate function
virNetlinkDelLink, which is also called for other purposes (deleting a
macvtap interface), a function pointer called "fallback" has been
added to the arglist of virNetlinkDelLink() - if that arg != NULL, the
provided function will be called when (and only when) RTM_DELLINK
fails with EOPNOTSUPP.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1252780 (part 2)
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1113474
When we set the MAC address of a network device as a part of setting
up macvtap "passthrough" mode (where the domain has an emulated netdev
connected to a host macvtap device that has exclusive use of the
physical device, and sets the device MAC address to match its own,
i.e. "<interface type='direct'> <source mode='passthrough' .../>"), we
use ioctl(SIOCSIFHWADDR) giving it the name of that device. This is
true even if it is an SRIOV Virtual Function (VF).
But, when we are setting the MAC address / vlan ID of a VF in
preparation for "hostdev network" passthrough (this is where we set
the MAC address and vlan id of the VF after detaching the host net
driver and before assigning the device to the domain with PCI
passthrough, i.e. "<interface type='hostdev'>", we do the setting via
a netlink RTM_SETLINK message for that VF's Physical Function (PF),
telling it the VF# we want to change. This sets an "administratively
changed MAC" flag for that VF in the PF's driver, and from that point
on (until the PF driver is reloaded, *not* merely the VF driver) that
VF's MAC address can't be changed using ioctl(SIOCSIFHWADDR) - the
only way to change it is via the PF with RTM_SETLINK.
This means that if a VF is used for hostdev passthrough, it will have
the admin flag set, and future attempts to use that VF for macvtap
passthrough will fail.
The solution to this problem is to check if the device being used for
macvtap passthrough is actually a VF; if so, we use the netlink
RTM_SETLINK message to the PF to set the VF's mac address instead of
ioctl(SIOCSIFHWADDR) directly to the VF; if not, behavior does not
change from previously.
There are three pieces to making this work:
1) virNetDevMacVLan(Create|Delete)WithVPortProfile() now call
virNetDev(Replace|Restore)NetConfig() rather than
virNetDev(Replace|Restore)MacAddress() (simply passing -1 for VF#
and vlanid).
2) virNetDev(Replace|Restore)NetConfig() check to see if the device is
a VF. If so, they find the PF's name and VF#, allowing them to call
virNetDev(Replace|Restore)VfConfig().
3) To prevent mixups when detaching a macvtap passthrough device that
had been attached while running an older version of libvirt,
virNetDevRestoreVfConfig() is potentially given the preserved name
of the VF, and if the proper statefile for a VF can't be found in
the stateDir (${stateDir}/${pfname}_vf${vfid}),
virNetDevRestoreMacAddress() is called instead (which will look in
the file named ${stateDir}/${vfname}).
This problem has existed in every version of libvirt that has both
macvtap passthrough and interface type='hostdev'. Fortunately people
seem to use one or the other though, so it hasn't caused any real
world problem reports.
Throughout the code, we have several places need to construct a path
somewhere in /sys/class/net/... They are not consistent and nearly
each code piece invents its own way how to do it. So unify this by:
1) use virNetDevSysfsFile() wherever possible
2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at
the rest of places which can't go with 1)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These two functions are identical, so no sense in having the
duplication. I resisted the temptation to replace calls to
virNetDevMacVLanDelete() with calls to virNetlinkDelLink() just in
case some mythical future platform has macvtap devices that aren't
managed with netlink (or in case we some day need to do more than just
tell the kernel to delete the device).
Investigation of a problem with creating passthrough macvtap devices
(https://bugzilla.redhat.com/show_bug.cgi?id=1185501) has shown that
this slightly more verbose failure message is useful. In particular,
the mac address can be used to determine the domain. You could also
figure this out by looking at preceding messages in a debug log, but
this gets it in a single place.
When compiling without WITH_MACVTAP, we can get:
'unsupported flags (0x1) in function
virNetDevMacVLanCreateWithVPortProfile'
on an attempt to start a domain.
Remove the flag check to reach the more helpful error:
Cannot create macvlan devices on this platform
https://bugzilla.redhat.com/show_bug.cgi?id=1186928
Currently, MAC registration occurs during device creation, which is
early enough that, during live migration, you end up with duplicate
MAC addresses on still-running source and target devices, even though
the target device isn't actually being used yet.
This patch proposes to defer MAC registration until right before
the guest can actually use the device -- In other words, right
before starting guest CPUs.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Our style overwhelmingly uses hanging braces (the open brace
hangs at the end of the compound condition, rather than on
its own line), with the primary exception of the top level function
body. Fix the few remaining outliers, before adding a syntax
check in a later patch.
* src/interface/interface_backend_netcf.c (netcfStateReload)
(netcfInterfaceClose, netcf_to_vir_err): Correct use of { in
compound statement.
* src/conf/domain_conf.c (virDomainHostdevDefFormatSubsys)
(virDomainHostdevDefFormatCaps): Likewise.
* src/network/bridge_driver.c (networkAllocateActualDevice):
Likewise.
* src/util/virfile.c (virBuildPathInternal): Likewise.
* src/util/virnetdev.c (virNetDevGetVirtualFunctions): Likewise.
* src/util/virnetdevmacvlan.c
(virNetDevMacVLanVPortProfileCallback): Likewise.
* src/util/virtypedparam.c (virTypedParameterAssign): Likewise.
* src/util/virutil.c (virGetWin32DirectoryRoot)
(virFileWaitForDevices): Likewise.
* src/vbox/vbox_common.c (vboxDumpNetwork): Likewise.
* tests/seclabeltest.c (main): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Otherwise this beautiful error would be overwritten when
the function is called with a really high rate number:
2014-07-28 12:51:47.920+0000: 2304: error : virCommandWait:2399 :
internal error: Child process (/sbin/tc class add dev vnet0 parent 1:
classid 1:1 htb rate 4294968kbps) unexpected exit status 1: Illegal "rate"
Usage: ... qdisc add ... htb [default N] [r2q N]
default minor id of class to which unclassified packets are sent {0}
r2q DRR quantums are computed as rate in Bps/r2q {10}
debug string of 16 numbers each 0-3 {0}
... class add ... htb rate R1 [burst B1] [mpu B] [overhead O]
[prio P] [slot S] [pslot PS]
[ceil R2] [cburst B2] [mtu MTU] [quantum Q]
rate rate allocated to this class (class can still borrow)
burst max bytes burst which can be accumulated during idle period {computed}
mpu minimum packet size used in rate computations
overhead per-packet size overhead used in rate computations
linklay adapting to a linklayer e.g. atm
ceil definite upper class rate (no borrows) {rate}
cburst burst but for ceil {computed}
mtu max packet size we create rate map for {1600}
prio priority of leaf; lowe
https://bugzilla.redhat.com/show_bug.cgi?id=1043735
Commit 1b14c44 broke the build on FreeBSD by changing
the signature of a few functions without updating the
corresponding stubs that are used when WITH_MACVTAP
or WITH_VIRTUALPORT is not defined.
In "src/util/" there are many enumeration (enum) declarations.
Sometimes, it's better using a typedef for variable types,
function types and other usages. Other enumeration will be
changed to typedef's in the future.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that we ditched our custom pthread impl for Win32, we can
use PTHREAD_MUTEX_INITIALIZER for static mutexes. This avoids
the need to use a virOnce one-time global initializer in a
number of places.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Most of our code base uses space after comma but not before;
fix the remaining uses before adding a syntax check.
* src/util/vircommand.c: Consistently use commas.
* src/util/virlog.c: Likewise.
* src/util/virnetdevbandwidth.c: Likewise.
* src/util/virnetdevmacvlan.c: Likewise.
* src/util/virnetdevvportprofile.c: Likewise.
* src/util/virnetlink.c: Likewise.
* src/util/virpci.c: Likewise.
* src/util/virsysinfo.c: Likewise.
* src/util/virusb.c: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
