According to VirtualBox download page [1], the 5.2.0 release is
no longer supported (the support ended 2020/07). Drop it from
Libvirt too.
1: https://www.virtualbox.org/wiki/Download_Old_Builds
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The UIUSBCommon::GetEnabled() function is not needed really, as
it sets a boolean to true and always succeeds. We can live
without the function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The UIUSBCommon::Enable() function is no longer needed as it is a
NOP. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The @data and @name arguments of
UIHost::CreateHostOnlyNetworkInterface() callback are unused.
Drop them and also their propagation from parent functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The @iid argument of UISession::OpenExisting() callback is
unused. Drop it and also its propagation from parent functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The @iid argument of UISession::Open() callback is unused. Drop
it and also its propagation from parent functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The @iid argument of UIMachine::LaunchVMProcess() callback is
unused. Drop it and also its propagation from parent functions.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The @mediaChangeOnly argument of vboxDomainAttachDeviceImpl()
function is unused. Drop it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are few cases where a function argument is marked as
unused, but it's used later in the function. The majority of such
occurrences are in vbox_tmpl.c as a residue of older vbox
versions, but a pair was found in vbox_common.c too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In d9ee51e, virNetDevIPCheckIPv6Forwarding was updated to walk the
contents of /proc/net/ipv6_route so that it could check to see if the
RTF_ADDRCONF was set on any IPv6 routes to ultimately determine if
enabling forwarding would result in an error due to accept_ra=1 being
set on the interface.
The implementation added in that commit limited the number of routes
that could be read from /proc/net/ipv6_route to 100_000, each with 150
characters. This is problematic for machines that have a full IPv6
routing table, as the IPv6 routing table has now grown to over 160_000
(it was closer to 100_000 at the time of that commit).
This patch increases the maximum route size from 100_000 to 1_000_000.
While a million routes is somewhat arbitrary, it's meant to be a value
that can be supported for the forseeable future. APNIC, one of the five
regional internet registries, recently published a forecast of IPv6
table growth which anticipates a worst-case growth to 1_000_000 in
January of 2029.
Signed-off-by: Brooks Swinnerton <bswinnerton@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
In error case, unref event->vm instead of vm. This makes it
easier for the reader to understand as it is the event struct
that's holding the reference.
Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Somehow the example I neglected to fully update the example for the
interface passt backend when the design changed during
development. This fixes the example to reflect what is in the code.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virAuthGetPasswordPath can return the same password over and over if
it's configured in the config. We rather want to try that only the first
time and then ask the user instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Rework the code to use the new helper instead of open coding the auth
callback interaction.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The helper uses the user-provided auth callbacks to ask the user. The
helper encapsulates the steps we do to query the user in few places into
a common helper which can be then used further.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
We only ever allow one username so there's no point passing it to each
authentication registration function. Additionally the only caller
(virNetClientNewLibSSH2) always passes a username so all the checks were
pointless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
None of the callers actually set it. Remove the field and corresponding
logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
With g_strdup not failing we can remove all of the 'error' section.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The only caller doesn't pass the password. Remove the argument.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Fix and clean up the error paths in virAuthConfigNew*.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The field was never populated so we can remove it and all the associated
logic.
Both for password authentication and fetching the password for the
public key we still can use the authentication callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
The only caller doesn't actually populate it. Remove it to simplify
internals.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
When starting a VirtualBox domain, we try to guess which frontend
to use. While the whole algorithm looks a bit outdated, it may
happen that we tell VirtualBox to use "gui" frontend, but not
which DISPLAY= to use.
I haven't found any documentation on the algorithm we use, but if
I make us fallback onto DISPLAY=:0 when no other configuration is
found then I'm able to start my guests just fine.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The _virtualboxCreateMachine() function allocates
@createFlagsUtf16 but never frees it.
==12481== 236 bytes in 2 blocks are definitely lost in loss record 2,060 of 2,216
==12481== at 0x48407E5: malloc (vg_replace_malloc.c:393)
==12481== by 0xB6C6D1B: RTStrToUtf16Tag (utf-8.cpp:1033)
==12481== by 0xB4DB500: _virtualboxCreateMachine (vbox_tmpl.c:634)
==12481== by 0xB4E68A3: vboxDomainDefineXMLFlags (vbox_common.c:1976)
==12481== by 0x4C7DF83: virDomainDefineXMLFlags (libvirt-domain.c:6666)
==12481== by 0x13C2DA: remoteDispatchDomainDefineXMLFlags (remote_daemon_dispatch_stubs.h:5271)
==12481== by 0x13C265: remoteDispatchDomainDefineXMLFlagsHelper (remote_daemon_dispatch_stubs.h:5252)
==12481== by 0x4AD9DF7: virNetServerProgramDispatchCall (virnetserverprogram.c:428)
==12481== by 0x4AD9931: virNetServerProgramDispatch (virnetserverprogram.c:302)
==12481== by 0x4AE28AC: virNetServerProcessMsg (virnetserver.c:135)
==12481== by 0x4AE2972: virNetServerHandleJob (virnetserver.c:155)
==12481== by 0x49BC275: virThreadPoolWorker (virthreadpool.c:164)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
We have virDomainGetCPUStats() API which offers querying
statistics on host CPU usage by given guest. And it works in two
modes: getting overall stats (@start_cpu == -1, @ncpus == 1) or
getting per host CPU usage.
For the QEMU driver it is implemented by looking into values
stored in corresponding cpuacct CGroup controller. Well, this
works for system instances, where libvirt has permissions to
create CGroups and place QEMU process into them. But it does not
fly for session connection, where no CGroups are set up.
Fortunately, we can do something similar to v8.8.0-rc1~95 and use
virProcessGetStatInfo() to fill the overall stats. Unfortunately,
I haven't found any source of per host CPU usage, so we just
continue throwing an error in that case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Firstly, the virProcessGetStatInfo() does not fail really. But
even if it did, it sets correct errno only sometimes (and even
that is done in a helper it's calling - virProcessGetStat() and
even there it's the case only in very few error paths).
Therefore, using virReportSystemError() to report errors is very
misleading. Use plain virReportError() instead. Luckily, there
are only two places where the former was used:
chDomainHelperGetVcpus() and qemuDomainHelperGetVcpus() (not a
big surprise since CH driver is heavily inspired by QEMU driver).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Two of the messages referred to 'backend type' when dealing
with the source type and one mentioned the 'client' attribute
from an earlier iteration of the patches, even though the attribute
was later changed to 'connect'.
https://bugzilla.redhat.com/show_bug.cgi?id=2063723
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
In a recent commit of v9.0.0-rc1~192 I've tried to forbid case
where a TAP device already exists, but at the same time it's
managed by Libvirt (<interface type='ethernet'> <target
dev='tap0' managed='yes'/> </interface>). NB, if @managed
attribute is missing then it's assumed to be managed by Libvirt.
Anyway, I've mistakenly put setting of
VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING flag into managed='yes'
branch instead of managed='no' branch in
qemuInterfaceEthernetConnect().
Move the setting of the flag into the correct branch.
Fixes: a2ae3d299c
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING flag is documented as:
/* The device is allowed to exist before creation */
VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING = 1 << 4,
and yet, the documentation to virNetDevTapCreate() documents its
behavior when the flag is passed as:
* VIR_NETDEV_TAP_CREATE_ALLOW_EXISTING
* - The device creation fails if @ifname already exists
Fortunately, the function is implemented so that it follows the
expected behavior (i.e. the former flag documentation). Fix the
function documentation then.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Since we don't really say how to send patches using this diff algorithm,
it only clutters the document about *submitting* patches.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
While some developers prefer to receive patches only on the mailing
list, cc'ing is a common practice in other projects.
Since it's easy enough to set up a mail filter for this, remove
the paragraph for simplicity.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Use g_autoptr() for virNWFilterDef and virNWFilterRuleDef and remove
unnecessary label.
Signed-off-by: Jiang Jiacheng <jiangjiacheng@huawei.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Remove the libvirt-daemon dependency from the various
libvirt-daemon-<hypervisor> subpackages, replacing it with a set of the
new sub subpackages providing similar functionality. When libvirt is build
with modular daemons, the hypervisor subpackages no longer include the
traditional, monolithic libvirt daemon.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To avoid needlessly installing the monolithic daemon, replace the
libvirt-daemon dependency with libvirt-daemon-common in the primary
drivers.
The qemu driver also needs a dependency on libvirt-daemon-log since
the virtqemud systemd service file has a hard dependency on
virtlogd.socket.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The systemd service files of the qemu and libxl driver currently have a
'Requires' dependency on virtlockd, which is too strong since virtlockd
is not enabled by default in either driver. Change the dependency to a
'Wants' to avoid a package dependency between the driver subpackages and
the new libvirt-daemon-lock subpackage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
To avoid needlessly installing the monolithic daemon, replace the
libvirt-daemon dependency with libvirt-daemon-common in the secondary
drivers. The common subpackage contains all the utilities and files
needed by the secondary drivers.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Both drivers use numad via virNumaGetAutoPlacementAdvice. Drop the numad
dependency from libvirt-daemon-common to avoid enforcing it all users of
the subpackage.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Only the nodedev and lxc drivers require module-init-tools. Remove the
dependency from libvirt-daemon-common and add it to the nodedev and lxc
drivers. This avoids enforcing the dependency on all users of
libvirt-daemon-common.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Introduce a new subpackage libvirt-daemon-common and move virt-admin,
virt-host-validate, virt-ssh-helper, libvirt-guests and miscellaneous
files/directories to it. Also move common dependencies to the new
subpackage. These files, utilities, and dependecies are used by other
core libvirt daemons
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The new name "libvirt-daemon-plugin-sanlock" provides consistency with the
newly introduced "libvirt-daemon-plugin-lockd" subpackage.
It's also a good opportunity to taking ownership of
%{_libdir}/libvirt/lock-driver/, removing the need for a dependency on the
libvirt-daemon package.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Introduce the libvirt-daemon-plugin-lockd subpackage to provide the
client-side lockd plugin for virtlockd.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
