The %posttrans scriptlet checks if libvirtd is active within a
condition that is only executed if libvirtd is active. Remove the
duplicate check.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The documentation included in these manual pages is mostly useful
to users of the 'send-key' virsh command, and the virsh manual
page refers to them, so it makes more sense to install them along
with virsh instead of libvirtd.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This has two advantages: it makes it possible for the admin to
ask rpm what package they belong to, and results in them ending
up with stricter permissions than they would have if we let
libvirt create them at runtime.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The server, not the client, uses local storage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Files like libvirt.conf influence the behavior of the library
itself. The daemon depends on the library, so the directory is
guaranteed to be present both on the client side and on the
server side.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
autotools used to produce those, but meson doesn't.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
'daemon-driver-storage' is just a meta-package, the actual daemon is in
the 'daemon-driver-storage-core' package, so without installing the meta
package the storage daemon is not being enabled.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2025644
Fixes: 50eae3f885, b8ef625544
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
It's been an optional build time dependency for a long time, so
if Meson couldn't find it the only consequence was that libvirt
would look for it at runtime instead, which is what we are doing
for most of our non-library dependencies anyway.
Since 5c98d1cee0 we've stopped even looking for it at build
time, so there's no point in having it installed in the build
environment.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
sysconfig files are owned by the admin of the host. They have the
liberty to put anything they want into these files. This makes it
difficult to provide different built-in defaults.
Remove the sysconfig file and place the current desired default into
the service file.
Local customizations can now go either into /etc/sysconfig/name
or /etc/systemd/system/name.service.d/my-knobs.conf
Attempt to handle upgrades in libvirt.spec.
Dirty files which are marked as %config will be renamed to file.rpmsave.
To restore them automatically, move stale .rpmsave files away, and
catch any new rpmsave files in %posttrans.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
While sections are somewhat loosely defined and thus the choice
is not quite a clear-cut one, section 8 might be a slightly
better fit in this case.
Suggested-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't usually provide manual pages for internal tools,
but in the case of virt-ssh-helper the command is installed
inside the default $PATH and so it's likely that the user
will stumble upon it by using the shell's completion feature
when invoking another virt-* command, which makes it a good
idea to provide at least a minimal manual page.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We no longer need its contents.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We're no longer performing build time detection.
Fixes: 506c3a39d6
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It is only needed if compatibility with clients that have
libvirt < 6.9.0 is required, and can be uninstalled otherwise.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reduce the delta in an upcoming change.
No change in behavior intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Fixes: 50eae3f885
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
These daemons do not have any support for unprivileged readonly
access, so we must not reference -ro.socket units in scripts.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Userfaultfd is by default allowed only for privileged processes. Since
libvirt runs QEMU unprivileged, we need to enable unprivileged access to
userfaultfd to enable post-copy migration.
https://bugzilla.redhat.com/show_bug.cgi?id=1945420
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The directory is already created by the build system, so we
don't need to create it explicitly in the spec file; moreover,
the path was incorrect, because it used datadir instead of
localstatedir.
Fixes: 4e041189f8
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
With this program we do not have to depend on the output of `certtool -i`, which
changed the order of the fields at some point and the newest version is
incompatible with what libvirt expects in tls_allowed_dn_list configuration
option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
In a50c473ad6 ("qemu: move temp file of screenshot and memorypeek to
per-domain dir") and c4f3c955d5 ("qemu: don't change ownership of
cache directory"), I move the temporary files of screenshot and
memorypeek from the cache directory to per-domain directory, and the
only user of the cache directory is the domain capabilities currently.
Since the domain capabilities are used by libvirtd, no need to set the
ownership of the cache directory to qemu_user and qemu_group.
Signed-off-by: Peng Liang <liangpeng10@huawei.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Commit b5e8db8f14 tuned the SPEC file so that libvirt daemons restart
on package upgrade. In order to do that it added a bunch of
parametrized macros using the %global directive. This caused a problem
when running RPM builds on CentOS Stream 8 resulting in:
error: Too many levels of recursion in macro expansion. It is likely
caused by recursive macro declaration.
error: Macro %libvirt_daemon_perform_restart failed to expand
error: line 1275: %global libvirt_daemon_perform_restart() \
if test %libvirt_daemon_needs_restart %1 \
then \
/bin/systemctl try-restart %1.service >/dev/null 2>&1 || : \
fi \
%libvirt_daemon_finish_restart %1
There are 2 important differences between %global and %define
directives:
1) %define is local-only and does have scope - in reality though, its
scope is apparently not really enforced because it behaves exactly
the same way as %global
2) %define is evaluated at the time of use while %global is evaluated
at the time of definition
The latter and the fact the macro is parametrized is the reason why the
RPM builds fails on CentOS. Strangely enough this only happens on
CentOS Stream, but not Fedora (which is also the main proponent of
replacing %define with %global). Anyhow, replacing %global with %define
makes the rpmbuild to pass on both and along with package upgrades.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While s390x doesn't have NUMA nodes it has libnuma which is still
helpful as it parses sysfs for us and kernel emulates NUMA#0.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The hypervisor drivers can be disabled in certain build scenarios, so
their corresponding post scripts need to match.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
We need to enable or disable the modular daemons with systemd after the
RPM install/uninstall.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for enabling/disabling daemons post/postun-install has a
bit of duplication across the different part of the spec, due to the
number of socket units involved. This is going to get much worse with
the need to enable/disalbe modular daemons, so benefits from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The daemons all need restarting to ensure they pick up the newly
installed code.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we restart libvirtd if the nwfilter/network configs have
changed. We need to take account of possibility that the modular
daemons are in use instead though.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The patterns for restarting daemons post-transaction has a bit of
duplication across the different part of the spec. This is going to
get much worse with the need to restart modular daemons, so benefits
from macroization.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Since we use git to manage RPM applied patches, we need to disable both
meson's -Werror config knob and libvirt's equivalent.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The macro can take multiple arguments, and the calls are more efficient
if done in one go.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Cloud-Hypervisor is a KVM virtualization using hypervisor. It
functions similarly to qemu and the libvirt Cloud-Hypervisor driver
uses a very similar structure to the libvirt driver.
The biggest difference from the libvirt perspective is that the
"monitor" socket is seperated into two sockets one that commands are
issued to and one that events are notified from. The current
implementation only uses the command socket (running over a REST API
with json encoded data) with future changes to add support for the
event socket (to better handle shutdowns from inside the VM).
This patch adds support for the following initial VM actions using the
Cloud-Hypervsior API:
* vm.create
* vm.delete
* vm.boot
* vm.shutdown
* vm.reboot
* vm.pause
* vm.resume
To use the Cloud-Hypervisor driver, the v15.0 release of
Cloud-Hypervisor is required to be installed.
Some additional notes:
* The curl handle is persistent but not useful to detect ch process
shutdown/crash (a future patch will address this shortcoming)
* On a 64-bit host Cloud-Hypervisor needs to support PVH and so can
emulate 32-bit mode but it isn't fully tested (a 64-bit kernel and
32-bit userspace is fine, a 32-bit kernel isn't validated)
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: William Douglas <william.douglas@intel.com>
Similar knobs, such as firewalld_zone and sysctl_config, are
already features, so convert this one as well to comply with
expectations.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
We want to be explicit about which features are enabled in our
RPM build instead of relying on default values.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In recent commit f772c1fd2a a misaligned %endif sneaked in which
upsets syntax-check. Align it properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
