The original virNumaGetNodeCPUs() returns an empty virBitmap if
given NUMA node has no CPUs. But that's not how our mock behaves
- it looks under $fakesysfs/node/node$N/cpulist only to find an
empty file which is then passed to virBitmapParseUnlimited()
which threats such input as error.
Fortunately, we don't have any fake sysfs data where this path is
hit, but we might soon.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When a test has a wrapper over main() (e.g. because it's
preloading some mock libraries). the main() is renamed to
something else (usually mymain()), and main() is generated by
calling one of VIR_TEST_MAIN() or VIR_TEST_MAIN_PRELOAD() macros.
This has a neat side effect - if mymain() returns an error a
short summary is printed, e.g.:
Some tests failed. Run them using:
VIR_TEST_DEBUG=1 VIR_TEST_RANGE=5-6 ./virtest
However, this detection only works if EXIT_FAILURE is returned by
mymain(). Document and enforce this limitation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When using VIR_TEST_MAIN() or VIR_TEST_MAIN_PRELOAD() macros, the
retval of mymain() will become retval of main(). Hence, mymain()
should use EXIT_FAILURE and EXIT_SUCCESS return values for
greater portability. Another reason is that otherwise our summary
printing of failed tests doesn't work (see following commit for
more info).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Back in the old days, we used to use libtool to run compiled
libraries. That meant we had to deal with "lt-" prefix for our
binaries. With meson that's no longer the case.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
A secret can be marked with the "private" attribute. The intent was that
it is not possible for any libvirt client to be able to read the secret
value, it would only be accesible from within libvirtd. eg the QEMU
driver can read the value to launch a guest.
With the modular daemons, the QEMU, storage and secret drivers are all
running in separate daemons. The QEMU and storage drivers thus appear to
be normal libvirt client's from the POV of the secret driver, and thus
they are not able to read a private secret. This is unhelpful.
With the previous patches that introduced a "system token" to the
identity object, we can now distinguish APIs invoked by libvirt daemons
from those invoked by client applications.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When fetching the value of a private secret, we need to use an elevated
identity otherwise the secret driver will deny access.
When using the modular daemons, the elevated identity needs to be active
before the secret driver connection is opened, and it will apply to all
APIs calls made on that conncetion.
When using the monolithic daemon, the identity at time of opening the
connection is ignored, and the elevated identity needs to be active
precisely at the time the virSecretGetValue API call is made.
After acquiring the secret value, the elevated identity should be
cleared.
This sounds complex, but is fairly straightfoward with the automatic
cleanup callbacks.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
When creating the system identity set the system token. The system
token is currently stored in a local path
/var/run/libvirt/common/system.token
Obviously with only traditional UNIX DAC in effect, this is largely
security through obscurity, if the client is running at the same
privilege level as the daemon. It does, however, reliably distinguish
an unprivileged client from the system daemons.
With a MAC system like SELinux though, or possible use of containers,
access can be further restricted.
A possible future improvement for Linux would be to populate the
kernel keyring with a secret for libvirt daemons to share.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
What this function really does it takes ownership of all pointers
passed (well, except for the first one - caps - to which it
registers new NUMA node). But since all info is passed as a
single pointer it's hard to tell (and use g_auto*). Let's use
double pointers to make the ownership transfer obvious.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The securityselinuxhelper is a mock that's replacing libselinux
APIs with our own implementation to achieve deterministic
results. Our implementation uses env vars (among other things) to
hold internal state. For instance, "FAKE_SELINUX_CONTEXT" and
"FAKE_SELINUX_DISABLED" variables are used. However, as we were
switching from setenv() to g_setenv() we also changed the set of
possible retvals from setcon_raw() and security_disable().
Previously, the retval of setenv() was used directly which
returns 0 on success and -1 on error. But g_setenv() has
different retval semantics: it returns 1 on success and 0 on
error.
This discrepancy can be observed by running viridentitytest where
case #2 reports an error ("!") - because setcon_raw() returns 1.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Linux 5.13 introduces "kcpuid", a tool similar to "cpuid", see
https://lore.kernel.org/lkml/1614928878-86075-1-git-send-email-feng.tang@intel.com/
Output formats of cpuid and kcpuid differ slightly. This adds support
for the latter.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Update to the final state now that qemu 6.0 was released.
Notable changes are the addition of 'EPYC-Rome-v2' cpu type and removal
of 'query-netdev' which we didn't use.
The rest is the usual churn caused by random registration of objects at
compile time.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
In addition the capability wasn't even used to gate any functionality
except for reporting the presence in the domain capabilities XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported qemu versions (>2.11) and there
isn't a reasonable way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The feature is present in all supported QEMU versions and there isn't a
more elegant way to detect it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemus have it, there isn't an elegant way to detect it and
it's unlikely to be ever removed on purpose.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
'query-commandline-options' never returned 'vmport' but we can detect it
in the list of supported object types. This removes it from all non-x86
originating test data as it's platform specific.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported QEMU versions now support query-qmp-schema. In the future
it will be possible to use the output of query-qmp-schema to also detect
commands reliably.
Since we are at the point where we have the least amount of .replies
files needing changing for a long time, move the 'query-qmp-schema' bits
before 'query-commands' to prepare for the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modern code uses QMP schema to query for active commit support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions have 'query-qmp-schema' so we can remove the
check whether it exists and all logic conntected to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Use virQEMUCapsInitQMPBasicArch in qemuHotplugCreateObjects so that we
also add the always-present capabilities to the set of capabilities used
for the hotplug test and fix fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All tests now get that capability via virQEMUCapsInitQMPBasicArch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Until we clean up and remove all capabilities which no longer make sense
to have separately, we should use virQEMUCapsInitQMPBasicArch to set the
defaults as it's used by qemuxml2argvtest when testing with fake
capabilities.
This allows us to prevent testing dead code paths with the fake
capability tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions now have the capability so testing the
absence doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_VHOSTUSER_MULTIQUEUE is now always enabled, so the negative
case doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move it under AARCH 64, since it's a platform specific feature, thus it
will be removed from all other platforms.
Since virQEMUCapsInitQMPBasicArch is used in qemuxml2argv test to
initiate qemuCaps for tests with fake capabilities, all the tests gain
GIC support now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_MACH_VIRT_GIC_VERSION will be assumed for all aarch64 machines
starting from next commit, so this test will become invalid. Remove it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT and
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT are now always asserted on PPC
machine types, move them to virQEMUCapsInitQMPBasicArch.
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
All supported qemu versions now have the flag so the test doesn't make
sense any more.
The flag setting will be moved to virQEMUCapsInitQMPBasicArch which will
make this test fail.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Drop all the cases pinned to unsupported versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Drop all the cases pinned to unsupported versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
As of May 7 2021, rhel-8 will be out for two years, which means we no
longer have to support rhel-7 ancient qemu.
QEMU versions in our supported distros:
RHEL-8: 2.12
Debian Stable: 3.1
OpenSuse LEAP 15.0 (SLES15 GA): 2.11
OpenSuse LEAP 15.2: 4.2
Ubuntu (Bionic): 2.11
Ubuntu (Focal): 4.2
This means we can bring up the minimum supported version to 2.11.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Builds failed with
tests/meson.build:690:0: ERROR: List item must be one
of <class 'str'>, not <class 'list'>
before this change.
https://gitlab.com/libvirt/libvirt/-/issues/158
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In certain cases such as when aborting migration we don't really care
for completion of the blockjob. Add 'force' as parameter of
'block-job-cancel'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This adds a new XML element
<filesystem>
<binary>
<sandbox mode='chroot|namespace'/>
</binary>
</filesystem>
This will be used by qemu virtiofs
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Allow passing a socket of an externally launched virtiofsd
to the vhost-user-fs device.
<filesystem type='mount'>
<driver type='virtiofs' queue='1024'/>
<source socket='/tmp/sock/'/>
</filesystem>
https://bugzilla.redhat.com/show_bug.cgi?id=1855789
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Currently the tests would fail if the bhyve commands are installed in
different path then /usr/bin. Strip the command path to not depend on
the host environment.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The function in question uses "tc" binary so virnetdevbandwidth feels
like better place for it.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Instead of checking for specific error that the binaries are not
available mock the virFindFileInPath function. This way we don't have
to skip these tests on host where the binaries are missing.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will allow us to run tests using firewall on hosts where the mocked
binaries are not available/installed instead of skipping these tests.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We always pass DNSMASQ so there is no need for the argument at all.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
