Commit Graph

40 Commits

Author SHA1 Message Date
Nikolay Shirokovskiy
f484310add daemon: add connection close rpc
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-03-01 14:18:16 +00:00
Martin Kletzander
a8743c3938 rpc: Remove keepalive_required option
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work.  It just effectively disables all incoming
connections.  That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive.  Thus, according to the server,
no client supports keepalive.

Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet.  And that won't happen until after we dispatched
the ConnectOpen call.

Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 13:15:56 +02:00
Martin Kletzander
d5f4241bbc Add support for admin API in libvirt daemon
For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:21 +02:00
Eric Blake
e7708a1c47 qemu: wire up RPC for qemu monitor events
These are the first async events in the qemu protocol, so this
patch looks rather big compared to most RPC additions.  However,
a large majority of this patch is just mechanical copy-and-paste
from recently-added network events.  It didn't help that this
is also the first virConnect rather than virDomain prefix
associated with a qemu-specific API.

* src/remote/qemu_protocol.x (qemu_*_domain_monitor_event_*): New
structs and RPC messages.
* src/rpc/gendispatch.pl: Adjust naming conventions.
* daemon/libvirtd.h (daemonClientPrivate): Track qemu events.
* daemon/remote.c (remoteClientFreeFunc): Likewise.
(remoteRelayDomainQemuMonitorEvent)
(qemuDispatchConnectDomainMonitorEventRegister)
(qemuDispatchConnectDomainMonitorEventDeregister): New functions.
* src/remote/remote_driver.c (qemuEvents): Handle qemu events.
(doRemoteOpen): Register for events.
(remoteNetworkBuildEventLifecycle)
(remoteConnectDomainQemuMonitorEventRegister)
(remoteConnectDomainQemuMonitorEventDeregister): New functions.
* src/qemu_protocol-structs: Regenerate.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-03-20 11:25:37 -06:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Eric Blake
047fd2e83e event: dynamically manage server-side RPC domain events
This patch continues the earlier conversion made for network
events, with a goal of introducing server-side event filtering
in a later patch.  Actual behavior is unchanged without
further RPC changes.

* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
domain events.
* daemon/remote.c (remoteClientInitHook, remoteClientFreeFunc)
(remoteRelayDomainEvent*)
(remoteDispatchConnectDomainEventRegister)
(remoteDispatchConnectDomainEventRegisterAny): Track domain
callbacks dynamically.
2014-02-12 10:48:15 -07:00
Eric Blake
b9d14ef03b event: track callbackID on daemon side of RPC
Right now, the daemon side of RPC events is hard-coded to at most
one callback per eventID.  But when there are hundreds of domains
or networks coupled and multiple conections, then sending every
event to every connection that wants an event, even for the
connections that only care about events for a particular object,
is inefficient.  In order to track more than one callback in the
server, we need to store callbacks by more than just their
eventID.  This patch rearranges the daemon side to store network
callbacks in a dynamic array, which can eventually be used for
multiple callbacks of the same eventID, although actual behavior
is unchanged without further patches to the RPC protocol.  For
ease of review, domain events are saved for a later patch, as
they touch more code.

While at it, fix a bug where a malicious client could send a
negative eventID to cause network event registration to access
outside of array bounds (thankfully not a CVE, since domain
events were already doing the bounds check, and since network
events have not been released).

* daemon/libvirtd.h (daemonClientPrivate): Alter the tracking of
network events.
* daemon/remote.c (daemonClientEventCallback): New struct.
(remoteEventCallbackFree): New function.
(remoteClientInitHook, remoteRelayNetworkEventLifecycle)
(remoteClientFreeFunc)
(remoteDispatchConnectNetworkEventRegisterAny): Track network
callbacks differently.
(remoteDispatchConnectNetworkEventDeregisterAny): Enforce bounds.

Signed-off-by: Eric Blake <eblake@redhat.com>
2014-01-15 13:55:20 -07:00
Cédric Bosdonnat
61ac8ce0a9 Add network events to the remote driver 2013-12-11 13:26:25 +00:00
Eric Blake
1add9c78da maint: don't use config.h in .h files
Enforce the rule that .h files don't need to (redundantly)
include <config.h>.

* cfg.mk (sc_prohibit_config_h_in_headers): New rule.
(_virsh_includes): Delete; instead, inline a smaller number of
exclusions...
(exclude_file_name_regexp--sc_require_config_h)
(exclude_file_name_regexp--sc_require_config_h_first): ...here.
* daemon/libvirtd.h (includes): Fix offenders.
* src/driver.h (includes): Likewise.
* src/gnutls_1_0_compat.h (includes): Likewise.
* src/libxl/libxl_conf.h (includes): Likewise.
* src/libxl/libxl_driver.h (includes): Likewise.
* src/lxc/lxc_conf.h (includes): Likewise.
* src/lxc/lxc_driver.h (includes): Likewise.
* src/lxc/lxc_fuse.h (includes): Likewise.
* src/network/bridge_driver.h (includes): Likewise.
* src/phyp/phyp_driver.h (includes): Likewise.
* src/qemu/qemu_conf.h (includes): Likewise.
* src/util/virnetlink.h (includes): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-06-05 05:53:25 -06:00
Daniel P. Berrange
509eb51e7c Implement the RPC protocol for the libvirt-lxc.la library
Add the infrastructure for the libvirt-lxc.la library to
the remote protocol client and daemon

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-15 18:16:53 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
404174cad3 Rename threads.{c,h} to virthread.{c,h} 2012-12-21 11:19:49 +00:00
Daniel P. Berrange
936d95d347 Rename logging.{c,h} to virlog.{c,h} 2012-12-21 11:17:14 +00:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Osier Yang
f9ce7dad60 Desert the FSF address in copyright
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c
2012-07-23 10:50:50 +08:00
Eric Blake
7b4e5693c1 API: make declaration of _LAST enum values conditional
Although this is a public API break, it only affects users that
were compiling against *_LAST values, and can be trivially
worked around without impacting compilation against older
headers, by the user defining VIR_ENUM_SENTINELS before using
libvirt.h.  It is not an ABI break, since enum values do not
appear as .so entry points.  Meanwhile, it prevents users from
using non-stable enum values without explicitly acknowledging
the risk of doing so.

See this list discussion:
https://www.redhat.com/archives/libvir-list/2012-January/msg00804.html

* include/libvirt/libvirt.h.in: Hide all sentinels behind
LIBVIRT_ENUM_SENTINELS, and add missing sentinels.
* src/internal.h (VIR_DEPRECATED): Allow inclusion after
libvirt.h.
(LIBVIRT_ENUM_SENTINELS): Expose sentinels internally.
* daemon/libvirtd.h: Use the sentinels.
* src/remote/remote_protocol.x (includes): Don't expose sentinels.
* python/generator.py (enum): Likewise.
* tests/cputest.c (cpuTestCompResStr): Silence compiler warning.
* tools/virsh.c (vshDomainStateReasonToString)
(vshDomainControlStateToString): Likewise.
2012-01-20 16:05:51 -07:00
Jiri Denemark
f4324e3292 Implement keepalive protocol in libvirt daemon 2011-11-24 11:44:08 +01:00
Daniel P. Berrange
d3406045fd Split src/util/network.{c,h} into 5 pieces
The src/util/network.c file is a dumping ground for many different
APIs. Split it up into 5 pieces, along functional lines

 - src/util/virnetdevbandwidth.c: virNetDevBandwidth type & helper APIs
 - src/util/virnetdevvportprofile.c: virNetDevVPortProfile type & helper APIs
 - src/util/virsocketaddr.c: virSocketAddr and APIs
 - src/conf/netdev_bandwidth_conf.c: XML parsing / formatting
   for virNetDevBandwidth
 - src/conf/netdev_vport_profile_conf.c: XML parsing / formatting
   for virNetDevVPortProfile

* src/util/network.c, src/util/network.h: Split into 5 pieces
* src/conf/netdev_bandwidth_conf.c, src/conf/netdev_bandwidth_conf.h,
  src/conf/netdev_vport_profile_conf.c, src/conf/netdev_vport_profile_conf.h,
  src/util/virnetdevbandwidth.c, src/util/virnetdevbandwidth.h,
  src/util/virnetdevvportprofile.c, src/util/virnetdevvportprofile.h,
  src/util/virsocketaddr.c, src/util/virsocketaddr.h: New pieces
* daemon/libvirtd.h, daemon/remote.c, src/conf/domain_conf.c,
  src/conf/domain_conf.h, src/conf/network_conf.c,
  src/conf/network_conf.h, src/conf/nwfilter_conf.h,
  src/esx/esx_util.h, src/network/bridge_driver.c,
  src/qemu/qemu_conf.c, src/rpc/virnetsocket.c,
  src/rpc/virnetsocket.h, src/util/dnsmasq.h, src/util/interface.h,
  src/util/iptables.h, src/util/macvtap.c, src/util/macvtap.h,
  src/util/virnetdev.h, src/util/virnetdevtap.c,
  tools/virsh.c: Update include files
2011-11-15 10:27:54 +00:00
Daniel P. Berrange
ddf3bd32ce Rewrite all the DTrace/SystemTAP probing
The libvirtd daemon had a few crude system tap probes. Some of
these were broken during the RPC rewrite. The new modular RPC
code is structured in a way that allows much more effective
tracing. Instead of trying to hook up the original probes,
define a new set of probes for the RPC and event code.

The master probes file is now src/probes.d.  This contains
probes for virNetServerClientPtr, virNetClientPtr, virSocketPtr
virNetTLSContextPtr and virNetTLSSessionPtr modules. Also add
probes for the poll event loop.

The src/dtrace2systemtap.pl script can convert the probes.d
file into a libvirt_probes.stp file to make use from systemtap
much simpler.

The src/rpc/gensystemtap.pl script can generate a set of
systemtap functions for translating RPC enum values into
printable strings. This works for all RPC header enums (program,
type, status, procedure) and also the authentication enum

The PROBE macro will automatically generate a VIR_DEBUG
statement, so any place with a PROBE can remove any existing
manual DEBUG statements.

* daemon/libvirtd.stp, daemon/probes.d: Remove obsolete probing
* daemon/libvirtd.h: Remove probe macros
* daemon/Makefile.am: Remove all probe buildings/install
* daemon/remote.c: Update authentication probes
* src/dtrace2systemtap.pl, src/rpc/gensystemtap.pl: Scripts
  to generate STP files
* src/internal.h: Add probe macros
* src/probes.d: Master list of probes
* src/rpc/virnetclient.c, src/rpc/virnetserverclient.c,
  src/rpc/virnetsocket.c, src/rpc/virnettlscontext.c,
  src/util/event_poll.c: Insert probe points, removing any
  DEBUG statements that duplicate the info
2011-10-11 11:26:13 +01:00
Eric Blake
6611d9ebcc build: work around older systemtap header
Systemtap 1.2 <sys/sdt.h> tried to expand STAP_PROBE3 into an
initialization:
  volatile __typeof__(arg) foo = arg;
but that fails if arg was declared as 'char arg[100]'.
Rather than make all callers to PROBE deal with the stupidity
of <sys/sdt.h>, we instead make PROBE cast away the problem.
Some of this preprocessor abuse copies ideas in src/libvirt.c.

* daemon/libvirtd.h (PROBE): Add casts to all arguments, using...
(VIR_ADD_CASTS, VIR_ADD_CAST, VIR_ADD_CAST2, VIR_ADD_CAST3)
(VIR_ADD_CAST_EXPAND, VIR_ADD_CAST_PASTE, VIR_COUNT_ARGS)
(VIR_ARG5, PROBE_EXPAND): New macros.
Reported by Wen Congyang.
2011-08-22 06:57:16 -06:00
Jim Fehlig
00d3c5a603 Remove code no longer used after commit df0b57a9 2011-07-11 14:38:03 -06:00
Jean-Baptiste Rouault
11bd53e322 Fix compilation error when SASL support is disabled
This patch adds #if HAVE_SASL where needed in libvirtd.h
2011-07-06 08:41:17 +02:00
Daniel P. Berrange
df0b57a95a Convert libvirtd over to the new RPC handling APIs
This guts the libvirtd daemon, removing all its networking and
RPC handling code. Instead it calls out to the new virServerPtr
APIs for all its RPC & networking work

As a fallout all libvirtd daemon error reporting now takes place
via the normal internal error reporting APIs. There is no need
to call separate error reporting APIs in RPC code, nor should
code use VIR_WARN/VIR_ERROR for reporting fatal problems anymore.

* daemon/qemu_dispatch_*.h, daemon/remote_dispatch_*.h: Remove
  old generated dispatcher code
* daemon/qemu_dispatch.h, daemon/remote_dispatch.h: New dispatch
  code
* daemon/dispatch.c, daemon/dispatch.h: Remove obsoleted code
* daemon/remote.c, daemon/remote.h: Rewrite for new dispatch
  APIs
* daemon/libvirtd.c, daemon/libvirtd.h: Remove all networking
  code
* daemon/stream.c, daemon/stream.h: Update for new APIs
* daemon/Makefile.am: Link to libvirt-net-rpc-server.la
2011-06-28 17:33:19 +01:00
Eric Blake
d4982b86d2 build: drop unused <sys/syslimits.h> header
<sys/syslimits.h> is not standardized, so portable programs should
not need to rely on it.  If there really is something that we need
where <sys/syslimits.h> provided the limit but <limits.h> did not,
then that would be a candidate for fixing in gnulib.  But this patch
did not turn up any compilation failures on Linux.

* src/internal.h (includes): Drop unused header.
* daemon/libvirtd.h (includes): Likewise.
* configure.ac (AC_CHECK_HEADERS): Likewise.
Based on a report by Matthias Bolte.
2011-05-17 09:34:11 -06:00
Matthias Bolte
0e27b8a856 sasl: Remove stack allocated 8kb temporary buffers
Move the buffers to the heap allocated client/private data structs.
2011-04-05 08:55:27 +02:00
Eric Blake
994e7567b6 maint: kill all remaining uses of old DEBUG macro
Done mechanically with:
$ git grep -l '\bDEBUG0\? *(' | xargs -L1 sed -i 's/\bDEBUG0\? *(/VIR_&/'

followed by manual deletion of qemudDebug in daemon/libvirtd.c, along
with a single 'make syntax-check' fallout in the same file, and the
actual deletion in src/util/logging.h.

* src/util/logging.h (DEBUG, DEBUG0): Delete.
* daemon/libvirtd.h (qemudDebug): Likewise.
* global: Change remaining clients over to VIR_DEBUG counterpart.
2011-02-21 08:46:52 -07:00
Eric Blake
e6b68d7479 daemon: use safer memory growth macros
* daemon/libvirtd.h (qemud_server): Change types of members
tracking array sizes, and add allocation trackers.
* daemon/event.c (virEventLoop): Likewise.
(virEventAddHandleImpl, virEventAddTimeoutImpl)
(virEventCleanupTimeouts, virEventCleanupHandles): Use
VIR_RESIZE_N instead of VIR_REALLOC_N.  Tweak debug messages to
match type changes.
* daemon/libvirtd.c (qemudDispatchServer, qemudRunLoop): Likewise.
2010-11-18 12:21:57 -07:00
Daniel P. Berrange
4b16b9c77f Include socket address in client probe data
It is useful to know where the client is connecting from,
so include the socket address in probe data.

* daemon/libvirtd.h: Use virSocketAddr for storing client
  address and keep printable address handy for logging
* daemon/libvirtd.c: Include socket address in client
  connect/disconnect probes
* daemon/probes.d: Add socket address to probes
* examples/systemtap/client.stp: Print socket address
* src/util/network.h: Add sockaddr_un to virSocketAddr union
2010-10-22 12:00:45 +01:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Chris Lalancette
337d201ef2 Qemu remote protocol.
Since we are adding a new "per-hypervisor" protocol, we
make it so that the qemu remote protocol uses a new
PROTOCOL and PROGRAM number.  This allows us to easily
distinguish it from the normal REMOTE protocol.

This necessitates changing the proc in remote_message_header
from a "remote_procedure" to an "unsigned", which should
be the same size (and thus preserve the on-wire protocol).

Changes since v1:
 - Fixed up a couple of script problems in remote_generate_stubs.pl
 - Switch an int flag to a bool in dispatch.c

Changes since v2:
 - None

Changes since v3:
 - Change unsigned proc to signed proc, to conform to spec

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2010-07-23 17:30:33 -04:00
Daniel P. Berrange
53fc1d8afd Ensure UNIX domain sockets are removed on daemon shutdown
When libvirtd exits it is leaving UNIX domain sockets on
the filesystem. These need to be removed.

The qemudInitPaths() method has signficant code churn to
switch from using a pre-allocated buffer on the stack, to
dynamically allocating on the heap.

* daemon/libvirtd.c, daemon/libvirtd.h: Store a reference
  to the UNIX domain socket path and unlink it on shutdown
2010-06-08 15:05:37 +01:00
Daniel P. Berrange
097e07a63a Remote driver & daemon impl of new event API
This wires up the remote driver to handle the new events APIs.
The public API allows an application to request a callback filters
events to a specific domain object, and register multiple callbacks
for the same event type. On the wire there are two strategies for
this

 - Register multiple callbacks with the remote daemon, each
   with filtering as needed
 - Register only one callback per event type, with no filtering

Both approaches have potential inefficiency. In the first scheme,
the same event gets sent over the wire many times if multiple
callbacks are registered. With the second scheme, unneccessary
events get sent over the wire if a per-domain filter is set on
the client. The second scheme is far easier to implement though,
so this patch takes that approach.

* daemon/dispatch.h: Don't export remoteRelayDomainEvent since it
  is no longer needed for unregistering callbacks, instead the
  unique callback ID is used
* daemon/libvirtd.c, daemon/libvirtd.h: Track and unregister
  callbacks based on callback ID, instead of function pointer
* daemon/remote.c: Switch over to using virConnectDomainEventRegisterAny
  instead of legacy virConnectDomainEventRegister function. Refactor
  remoteDispatchDomainEventSend() to cope with arbitrary event types
* src/driver.h, src/driver.c: Move verify() call into source file
  instead of header, to avoid polluting the global namespace with
  the verify function name
* src/remote/remote_driver.c: Implement new APIs for event
  registration. Refactor processCallDispatchMessage() to cope
  with arbitrary incoming event types. Merge remoteDomainQueueEvent()
  into processCallDispatchMessage() to avoid duplication of code.
  Rename remoteDomainReadEvent() to remoteDomainReadEventLifecycle()
* src/remote/remote_protocol.x: Define wire format for the new
  virConnectDomainEventRegisterAny and virConnectDomainEventDeregisterAny
  functions
2010-03-26 13:52:29 +00:00
Eric Blake
36d8e7d8d7 build: consistently indent preprocessor directives
* global: patch created by running:
for f in $(git ls-files '*.[ch]') ; do
    cppi $f > $f.t && mv $f.t $f
done
2010-03-09 19:22:28 +01:00
Daniel P. Berrange
50b6c95d62 Make all bitfields unsigned ints to avoid unexpected values in casts
The 'int virInterfaceIsActive()' method was directly returning the
value of the 'int active:1' bitfield in virIntefaceDefPtr. A bitfield
with a signed integer, will hold the values 0 and -1, not 0 and +1
as might be expected. This meant that virInterfaceIsActive() was
always returning -1 when the interface was active, not +1 & thus all
callers thought an error had occurred. To protect against this kind
of mistake again, change all bitfields to be unsigned ints

* daemon/libvirtd.h, src/conf/domain_conf.h, src/conf/interface_conf.h,
  src/conf/network_conf.h: Change bitfields to unsigned int.
2010-01-20 16:33:02 +00:00
Cole Robinson
438fa79358 daemon: Don't blindly unregister domain events
The daemon will attempt to unregister domain events on client disconnect,
even if no events were ever registered. This raises an unneeded error.

Track in the qemu_client structure if events have been registered, and
check this when performing cleanup.
2010-01-13 14:24:13 -05:00
Daniel P. Berrange
075bb5f1aa Move libvirtd event loop into background thread
The virStateInitialize() call for starting up stateful drivers
may require that the event loop is running already. This it is
neccessary to start the event loop before this call. At the
same time, network clients must not be processed until afte
virStateInitialize has completed.

The qemudListenUnix() and remoteListenTCP() methods must
therefore not register file handle watches, merely open the
network sockets & listen() on them. This means clients can
connected and are queued, pending completion of initialization

The qemudRunLoop() method is moved into a background thread
that is started early to allow access to the event loop during
driver initialization. The main process thread leader pretty
much does nothing once the daemon is running, merely waits
for the event loop thread to quit

* daemon/libvirtd.c, daemon/libvirtd.h: Move event loop into
  a background thread
* daemon/THREADING.txt: Rewrite docs to better reflect reality
2009-11-03 14:45:43 -05:00
Daniel P. Berrange
a71f79c37e Pull signal setup code out into separate method
* daemon/libvirtd.c: Introduce a daemonSetupSignals() method
  and put all signal handling code there
* daemon/libvirtd.h: Add sigread/sigwrite to qemud_server type
2009-11-02 11:41:35 -05:00
Daniel P. Berrange
4f17809a36 Handle outgoing data streams in libvirtd
* daemon/dispatch.c: Set streamTX flag on outgoing data packets
* daemon/qemud.h: Add streamTX flag to track outgoing data
* daemon/qemud.c: Re-enable further TX when outgoing data packet
  has been fully sent.
* daemon/stream.h, daemon/stream.c: Add method for enabling TX.
  Support reading from streams and transmitting data out to client
2009-09-29 15:48:58 +01:00
Daniel P. Berrange
11573f3ec1 Helper functions for processing data streams in libvirtd
Defines the extensions to the remote protocol for generic
data streams. Adds a bunch of helper code to the libvirtd
daemon for working with data streams.

* daemon/Makefile.am: Add stream.c/stream.h to build
* daemon/stream.c, qemud/stream.h: Generic helper functions for
  creating new streams, associating streams with clients, finding
  existing streams for a client and removing/deleting streams.
* src/remote/remote_protocol.x: Add a new 'REMOTE_STREAM' constant
  for the 'enum remote_message_type' for encoding stream data
  in wire messages. Add a new 'REMOTE_CONTINUE' constant to
  'enum remote_message_status' to indicate further data stream
  messsages are expected to follow.  Document how the
  remote_message_header is used to encode data streams
* src/remote/remote_protocol.h: Regenerate
* daemon/dispatch.c: Remove assumption that a error message
  sent to client is always type=REMOTE_REPLY. It may now
  also be type=REMOTE_STREAM. Add convenient method for
  sending outgoing stream data packets. Log and ignore
  non-filtered incoming stream packets. Add a method for
  serializing a stream error message
* daemon/dispatch.h:  Add API for serializing stream errors
  and sending stream data packets
* daemon/qemud.h: Add struct qemud_client_stream for tracking
  active data streams for clients. Tweak filter function
  operation so that it accepts a client object too.
* daemon/qemud.c: Refactor code for free'ing message objects
  which have been fully transmitted into separate method.
  Release all active streams when client shuts down. Change
  filter function to be responsible for queueing the message
2009-09-29 15:48:58 +01:00
Daniel P. Berrange
c00c6d038c Rename daemon main code
* daemon/qemud.c: Rename to daemon/libvirtd.c
* daemon/qemud.h: Rename to daemon/libvirtd.h
* daemon/Makefile.am, daemon/dispatch.h, daemon/mdns.c,
  daemon/remote.h: Update for renamed libvirtd.h file
2009-09-21 14:41:45 +01:00