Commit Graph

43 Commits

Author SHA1 Message Date
Michal Privoznik
733359a6ff libvirtd.conf: Drop max_requests
Since its introduction in f61341173b it was never
implemented nor there are plans to implement it. Drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-08-16 08:59:28 +02:00
Ján Tomko
e9f3222705 introduce virConfReadString
Rewrite virConfReadMem to take a null-terminated string.
All the callers were calling strlen on it anyway.
2017-08-08 12:19:17 +02:00
Boris Fiuczynski
66583c0cf7 libvirtd: add openvitch timeout value
Provide the ability to specify a default timeout value for
successful completion of openvswitch calls in the libvirtd
configuration file.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-02-09 14:34:08 +01:00
Daniel P. Berrange
54628f5434 libvirtd: convert to typesafe virConf accessors
The libvirtdconftest was previously used to test data type
handling of the libvirtd config file. Now we're using the
typedef APIs, this test case has little value, and is pretty
hard to fixup with deal with the new APIs.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-07-12 09:57:01 +01:00
Daniel P. Berrange
c7d0fbe62b libvirtd: add config option for TLS priority
Add a "tls_priority" config option to /etc/libvirt/libvirtd.conf
to allow the administrator to override the built-in default
setting. This only affects the server side configuration.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-06-08 13:48:45 +01:00
Nikolay Shirokovskiy
6fe81c3a71 daemon: add option to read host uuid from /etc/machine-id
Daemon config parameter switch between reading host uuid
either from smbios or machine-id:

host_uuid_source = "smbios|machine-id"

Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
2016-05-03 08:58:30 -04:00
Jason J. Herne
b3a4b176f0 Libvirt: Add missing default value for config option max_queued_clients
Commit 1199edb1d4 added config option max_queued_clients and documented the
default value as 1000 but never actually set that value. This patch sets the
default value.

This addresses an issue whereby the following error message is reported if too
many migrations are started simultaneously:

error: End of file while reading data: Ncat: Invalid argument.: Input/output error

The problem is that too many ncat processes are spawned on the destination
system. They all attempt to connect to the libvirt socket. Because the
destination libvirtd cannot respond to the connect requests quickly enough we
overrun the socket's pending connections queue.

Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
2016-03-01 18:00:19 +01:00
Martin Kletzander
a8743c3938 rpc: Remove keepalive_required option
Since its introduction in 2011 (particularly in commit f4324e3292),
the option doesn't work.  It just effectively disables all incoming
connections.  That's because the client private data that contain the
'keepalive_supported' boolean, are initialized to zeroes so the bool is
false and the only other place where the bool is used is when checking
whether the client supports keepalive.  Thus, according to the server,
no client supports keepalive.

Removing this instead of fixing it is better because a) apparently
nobody ever tried it since 2011 (4 years without one month) and b) we
cannot know whether the client supports keepalive until we get a ping or
pong keepalive packet.  And that won't happen until after we dispatched
the ConnectOpen call.

Another two reasons would be c) the keepalive_required was tracked on
the server level, but keepalive_supported was in private data of the
client as well as the check that was made in the remote layer, thus
making all other instances of virNetServer miss this feature unless they
all implemented it for themselves and d) we can always add it back in
case there is a request and a use-case for it.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-08-10 13:15:56 +02:00
Martin Kletzander
beb0eda2e3 Add configuration options for permissions on daemon's admin socket
This is not going to be very widely used, but for some corner cases and
easier (unsafe) debugging, it might be nice.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-06-16 13:46:21 +02:00
Michal Privoznik
ca4f9518b8 virconf: Introduce VIR_CONF_ULONG
https://bugzilla.redhat.com/show_bug.cgi?id=1160995

In our config files users are expected to pass several integer values
for different configuration knobs. However, majority of them expect a
nonnegative number and only a few of them accept a negative number too
(notably keepalive_interval in libvirtd.conf).
Therefore, a new type to config value is introduced: VIR_CONF_ULONG
that is set whenever an integer is positive or zero. With this
approach knobs accepting VIR_CONF_LONG should accept VIR_CONF_ULONG
too.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-12-15 10:34:18 +01:00
Michal Privoznik
f81a702180 virConfType: switch to VIR_ENUM_{DECL,IMPL}
There's no need to implement ToString() function like we do if we
can use our shiny macros.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-12-15 10:34:18 +01:00
Ján Tomko
60555fb8ed Indent top-level labels by one space in daemon/ 2014-03-25 14:58:38 +01:00
Martin Kletzander
95aed7febc Use K&R style for curly braces in remaining files
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-20 17:27:17 +01:00
Daniel P. Berrange
c0c8c1d7bb Remove global log buffer feature entirely
A earlier commit changed the global log buffer so that it only
records messages that are explicitly requested via the log
filters setting. This removes the performance burden, and
improves the signal/noise ratio for messages in the global
buffer. At the same time though, it is somewhat pointless, since
all the recorded log messages are already going to be sent to an
explicit log output like syslog, stderr or the journal. The
global log buffer is thus just duplicating this data on stderr
upon crash.

The log_buffer_size config parameter is left in the augeas
lens to prevent breakage for users on upgrade. It is however
completely ignored hereafter.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Daniel P. Berrange
2835c1e730 Add virLogSource variables to all source files
Any source file which calls the logging APIs now needs
to have a VIR_LOG_INIT("source.name") declaration at
the start of the file. This provides a static variable
of the virLogSource type.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-03-18 14:29:22 +00:00
Michal Privoznik
68f60f669c daemon: Introduce max_anonymous_clients
https://bugzilla.redhat.com/show_bug.cgi?id=992980

This config tunable allows users to determine the maximum number of
accepted but yet not authenticated users.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-03-17 17:45:13 +01:00
Ján Tomko
9b9d7704b5 Change file names in comments to match the files they are in
Some of these are leftovers from renaming the files, others
are just typos.

Also introduce an ugly awk script to enforce this.
2014-03-10 14:26:04 +01:00
Michal Privoznik
1199edb1d4 Introduce max_queued_clients
This configuration knob lets user to set the length of queue of
connection requests waiting to be accept()-ed by the daemon. IOW, it
just controls the @backlog passed to listen:

  int listen(int sockfd, int backlog);
2013-08-05 11:03:01 +02:00
Daniel P. Berrange
483246f2e1 Convert 'int i' to 'size_t i' in daemon/ files
Convert the type of loop iterators named 'i', 'j', k',
'ii', 'jj', 'kk', to be 'size_t' instead of 'int' or
'unsigned int', also santizing 'ii', 'jj', 'kk' to use
the normal 'i', 'j', 'k' naming

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-07-10 10:23:10 +01:00
Michal Privoznik
1b3e1d3ba5 Adapt to VIR_ALLOC and virAsprintf in daemon/* 2013-07-10 11:07:31 +02:00
John Ferlan
ba6e187f1e Resolve valgrind error in remoteConfigGetStringList()
Commit id 'ed3bac71' introduced the following:

TEST: libvirtdconftest
      ........................................ 40  OK
==25875== 690 (480 direct, 210 indirect) bytes in 30 blocks are definitely lost in loss record 18 of 24
==25875==    at 0x4A06B6F: calloc (vg_replace_malloc.c:593)
==25875==    by 0x4C737DF: virAllocN (viralloc.c:152)
==25875==    by 0x403BC8: remoteConfigGetStringList (libvirtd-config.c:74)
==25875==    by 0x4042CF: daemonConfigLoadOptions (libvirtd-config.c:382)
==25875==    by 0x4052F5: daemonConfigLoadData (libvirtd-config.c:479)
==25875==    by 0x40222C: testCorrupt (libvirtdconftest.c:112)
==25875==    by 0x40321F: virtTestRun (testutils.c:158)
==25875==    by 0x401FEE: mymain (libvirtdconftest.c:228)
==25875==    by 0x40385A: virtTestMain (testutils.c:722)
==25875==    by 0x37C1021A04: (below main) (libc-start.c:225)
==25875==
PASS: libvirtdconftest
2013-06-29 05:54:11 -04:00
Daniel P. Berrange
ed3bac713c Setup default access control manager in libvirtd
Add a new 'access_drivers' config parameter to the libvirtd.conf
configuration file. This allows admins to setup the default
access control drivers to use for API authorization. The same
driver is to be used by all internal drivers & APIs

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-06-24 15:24:36 +01:00
Michal Privoznik
e463f4de77 Prefer VIR_STRDUP over virAsprintf(&dst, "%s", str)
There's no sense in using virAsprintf() just to duplicate a string.
We should use VIR_STRDUP which is designed just for that.
2013-06-07 17:45:53 +02:00
Osier Yang
e25ca77303 daemon: Remove the whitespace before ";" 2013-05-21 23:41:45 +08:00
Daniel P. Berrange
ead630319d Separate virGetHostname() API contract from driver APIs
Currently the virGetHostname() API has a bogus virConnectPtr
parameter. This is because virtualization drivers directly
reference this API in their virDriverPtr tables, tieing its
API design to the public virConnectGetHostname API design.

This also causes problems for access control checks since
these must only be done for invocations from the public
API, not internal invocation.

Remove the bogus virConnectPtr parameter, and make each
hypervisor driver provide a dedicated function for the
driver API impl. This will allow access control checks
to be easily inserted later.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-08 10:47:47 +01:00
Michal Privoznik
a54434f4ba Adapt to VIR_STRDUP and VIR_STRNDUP in daemon/* 2013-05-05 12:17:12 +02:00
Michal Privoznik
7c9a2d88cd virutil: Move string related functions to virstring.c
The source code base needs to be adapted as well. Some files
include virutil.h just for the string related functions (here,
the include is substituted to match the new file), some include
virutil.h without any need (here, the include is removed), and
some require both.
2013-05-02 16:56:55 +02:00
Daniel P. Berrange
cf7ac00ebd Rename HAVE_POLKIT to WITH_POLKIT 2013-01-14 13:29:55 +00:00
Daniel P. Berrange
321a7d53f3 Convert HAVE_SASL to WITH_SASL
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-01-11 11:03:23 +00:00
Daniel P. Berrange
f24404a324 Rename virterror.c virterror_internal.h to virerror.{c,h} 2012-12-21 11:19:50 +00:00
Daniel P. Berrange
ab9b7ec2f6 Rename memory.{c,h} to viralloc.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
936d95d347 Rename logging.{c,h} to virlog.{c,h} 2012-12-21 11:17:14 +00:00
Daniel P. Berrange
0f8454101d Rename conf.{c,h} to virconf.{c,h} 2012-12-21 11:17:13 +00:00
Daniel P. Berrange
1c04f99970 Remove spurious whitespace between function name & open brackets
The libvirt coding standard is to use 'function(...args...)'
instead of 'function (...args...)'. A non-trivial number of
places did not follow this rule and are fixed in this patch.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-11-02 13:36:49 +00:00
Eric Blake
4ecb723b9e maint: fix up copyright notice inconsistencies
https://www.gnu.org/licenses/gpl-howto.html recommends that
the 'If not, see <url>.' phrase be a separate sentence.

* tests/securityselinuxhelper.c: Remove doubled line.
* tests/securityselinuxtest.c: Likewise.
* globally: s/;  If/.  If/
2012-09-20 16:30:55 -06:00
Osier Yang
f9ce7dad60 Desert the FSF address in copyright
Per the FSF address could be changed from time to time, and GNU
recommends the following now: (http://www.gnu.org/licenses/gpl-howto.html)

  You should have received a copy of the GNU General Public License
  along with Foobar.  If not, see <http://www.gnu.org/licenses/>.

This patch removes the explicit FSF address, and uses above instead
(of course, with inserting 'Lesser' before 'General').

Except a bunch of files for security driver, all others are changed
automatically, the copyright for securify files are not complete,
that's why to do it manually:

  src/security/security_selinux.h
  src/security/security_driver.h
  src/security/security_selinux.c
  src/security/security_apparmor.h
  src/security/security_apparmor.c
  src/security/security_driver.c
2012-07-23 10:50:50 +08:00
Daniel P. Berrange
edb768c9ce Replace use of virConfError with virReportError
Update the libvirtd config handling code to use virReportError
instead of the virConfError custom macro

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-07-20 14:39:47 +01:00
Daniel P. Berrange
517368a377 Remove uid param from directory lookup APIs
Remove the uid param from virGetUserConfigDirectory,
virGetUserCacheDirectory, virGetUserRuntimeDirectory,
and virGetUserDirectory

These functions were universally called with the
results of getuid() or geteuid(). To make it practical
to port to Win32, remove the uid parameter and hardcode
geteuid()

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 10:55:06 +01:00
William Jon McCann
32a9aac2e0 Use XDG Base Directories instead of storing in home directory
As defined in:
http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html

This offers a number of advantages:
 * Allows sharing a home directory between different machines, or
sessions (eg. using NFS)
 * Cleanly separates cache, runtime (eg. sockets), or app data from
user settings
 * Supports performing smart or selective migration of settings
between different OS versions
 * Supports reseting settings without breaking things
 * Makes it possible to clear cache data to make room when the disk
is filling up
 * Allows us to write a robust and efficient backup solution
 * Allows an admin flexibility to change where data and settings are stored
 * Dramatically reduces the complexity and incoherence of the
system for administrators
2012-05-14 15:15:58 +01:00
Alex Jia
d0eaf4b124 daemon: Plug memory leaks
* daemon/libvirtd-config.c (daemonConfigFree): fix memory leaks.

How to reproduce?

% make && make -C tests check TESTS=libvirtdconftest
% cd tests && valgrind -v --leak-check=full ./libvirtdconftest

actual result:

==11008== 185 bytes in 5 blocks are definitely lost in loss record 3 of 5
==11008==    at 0x4A05FDE: malloc (vg_replace_malloc.c:236)
==11008==    by 0x39CF07F6E1: strdup (strdup.c:43)
==11008==    by 0x406626: daemonConfigLoadOptions (libvirtd-config.c:438)
==11008==    by 0x406800: daemonConfigLoadData (libvirtd-config.c:492)
==11008==    by 0x403CCF: testCorrupt (libvirtdconftest.c:110)
==11008==    by 0x404FAD: virtTestRun (testutils.c:145)
==11008==    by 0x403A34: mymain (libvirtdconftest.c:219)
==11008==    by 0x404687: virtTestMain (testutils.c:700)
==11008==    by 0x39CF01ECDC: (below main) (libc-start.c:226)
==11008==
==11008== LEAK SUMMARY:
==11008==    definitely lost: 185 bytes in 5 blocks

Signed-off-by: Alex Jia <ajia@redhat.com>
2012-04-12 17:30:49 +08:00
Daniel P. Berrange
a4475839dd Switch libvirtd config loading code to use error APIs
Using VIR_ERROR means the test suite can't catch error messages
easily. Use the proper error reporting APIs instead
2012-04-10 11:12:27 +01:00
Daniel P. Berrange
6e6e9bebc2 Add API for loading daemon config from in-memory blob
Rename existing daemonConfigLoad API to daemonConfigLoadFile and
add an alternative daemonConfigLoadData

* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Add
  daemonConfigLoadData and rename daemonConfigLoad to
  daemonConfigLoadFile
* daemon/libvirtd.c: Update for renamed API
2012-04-10 11:11:12 +01:00
Daniel P. Berrange
db46f3cefe Split libvirtd config file loading out into separate files
To enable creation of unit tests, split the libvirtd config file
loading code out into separate files.

* daemon/libvirtd.c: Delete config loading code / structs
* daemon/libvirtd-config.c, daemon/libvirtd-config.h: Config
  file loading APIs

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-04-10 11:08:51 +01:00