cpuNodeData has always been followed by cpuDecode as no hypervisor
driver is really interested in raw CPUID data for a host CPU. Let's
create a new CPU driver API which returns virCPUDefPtr directly.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move all the NWFilterObj API's into their own module virnwfilterobj
from the nwfilter_conf
Purely code motion at this point, plus adjustments to cleanly build.
Whole implementations along with helper totalling screens of code were
conditionally compiled. That made the code totally unreadable and
untestable. Rename functions to have the architecture in the name so
that all can be compiled at the same time and introduce header to allow
testing them all.
After the system has been booted, it should not change.
Cache the return value of virSystemdHasMachined.
Allow starting and terminating machines with just one
DBus call, instead of three, reducing the chance of
the call timing out.
Also introduce a small function for resetting the cache
to be used in tests.
Move all the NodeDeviceObj API's into their own module virnodedeviceobj
from the node_device_conf
Purely code motion at this point, plus adjustments to cleanly build.
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The API is useful for creating virCPUData in a hypervisor driver from
data we got by querying the hypervisor.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The new API is called virCPUDataFree. Individual CPU drivers are no
longer required to implement their own freeing function unless they need
to free architecture specific data from virCPUData.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This will eventually replace virQEMUBuildBufferEscapeComma, however
it's not possible right now. Some parts of the code that uses the
old function needs to be refactored.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Rework the code to perform the various searches by parent, parent_wwnn/
parent_wwpn, parent_fabric_wwn, or vport capable in order to return the
'parent_host' number that is vHBA capable.
The former virNodeDeviceGetParentHost is renamed to add the ByParent
on it fixes an issue where if no parent was supplied in the XML to
create the vHBA, then virNodeDeviceFindByName was called with a NULL
second parameter which had bad results.
The reworked code will make the various calls to fetch the NPIV host
by the passed parameter options or if none are provided find a vport
capable NPIV HBA to perform the create. If the call is from the delete
path, then this option won't be allowed.
Each of virNodeDeviceGetParentHostBy* functions is now static, so
remove them external definitions.
A secondary benefit of this is the test_driver now can make use of
the new API to add some new tests to test the various creation options.
Create a virscsihost.c and place the functions there. That removes the
last #ifdef __linux__ from virutil.c.
Take the opporunity to also change the function names and in one case
the parameters slightly
Use the new virNodeDeviceGetParentName instead. Modify the callers to
build the node device scsi_host# name string in order to call the new
function so that proper lookup occurs.
Rather than have them mixed in with the virutil apis, create a separate
virvhba.c module and move the vHBA related calls into there. Soon there
will be more added.
Also modify the names of the functions and some arguments to be more
indicative of what is really happening. Adjust the callers respectively.
While I was changing fchosttest, rather than the non-descriptive names
test1...test6, rename them to match what the test is doing.
So rather than comparing 2 paths (strings) as they are, which can very
easily lead to unnecessary errors (e.g. in storage driver) that the paths
are not the same when in fact they'd be e.g. just symlinks to the same
location, we should put our best effort into resolving any symlinks and
canonicalizing the path and only then compare the 2 paths for equality.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This patchs allows to set the timeout value used for all
openvswitch calls. The default timeout value remains as
before at 5 seconds.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need to traverse the symlinks one step at the time.
Therefore we need to see where a symlink is pointing to.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a simple wrapper over mount(). However, not every system
out there is capable of moving a mount point. Therefore, instead
of having to deal with this fact in all the places of our code we
can have a simple wrapper and deal with this fact at just one
place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Other drivers (like qemu) would like to know if the namespaces
are available therefore it makes sense to move this function to
a shared module.
At the same time, this function had some default namespaces that
are checked with every call. It is not necessary - let callers
pass just those namespaces they are interested in.
With the move the function is renamed to
virProcessNamespaceAvailable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Surprisingly there was a virDomainPCIAddressReleaseAddr() function
already, but it was completely unused. Since we don't reserve entire
slots at once any more, there is no need to release entire slots
either, so we just replace the single call to
virDomainPCIAddressReleaseSlot() with a call to
virDomainPCIAddressReleaseAddr() and remove the now unused function.
The keen observer may be concerned that ...Addr() doesn't call
virDomainPCIAddressValidate(), as ...Slot() did. But really the
validation was pointless anyway - if the device hadn't been suitable
to be connected at that address, it would have failed validation
before every being reserved in the first place, so by definition it
will pass validation when it is being unplugged. (And anyway, even if
something "bad" happened and we managed to have a device incorrectly
at the given address, we would still want to be able to free it up for
use by a device that *did* validate properly).
Since we don't actually reserve an entire slot at a time anymore, the
name of this function is just confusing, and it's almost identical in
operation to virDomainPCIAddressReserveNextAddr() anyway, so remove
the *Slot() function and replace calls to it with calls to *Addr(...,
-1).
This utility function iterates through all devices looking for any
with a PCI address that has function != 0 (which implies that multiple
functions are in use on that slot), then uses an inner iterator to
find the device that's on function 0 of that same slot and sets the
"multi" in its virDomainDeviceInfo (as long as it hasn't already been
set explicitly by someone who presumably has better information than
we do).
It isn't yet called from anywhere, so will have no functional effect.
https://bugzilla.redhat.com/show_bug.cgi?id=1373711
Add support and documentation for the [NO_]OVERWRITE flags for the
logical backend.
Update virsh.pod with a description of the process for usage of
the flags and building of the pool's volume group.
Signed-off-by: John Ferlan <jferlan@redhat.com>
With our new qemu namespace code in place, the relabelling of
devices is done not as good is it could: a child process is
spawned, it enters the mount namespace of the qemu process and
then runs desired API of the security driver.
Problem with this approach is that internal state transition of
the security driver done in the child process is not reflected in
the parent process. While currently it wouldn't matter that much,
it is fairly easy to forget about that. We should take the extra
step now while this limitation is still fresh in our minds.
Three new APIs are introduced here:
virSecurityManagerTransactionStart()
virSecurityManagerTransactionCommit()
virSecurityManagerTransactionAbort()
The Start() is going to be used to let security driver know that
we are starting a new transaction. During a transaction no
security labels are actually touched, but rather recorded and
only at Commit() phase they are actually updated. Should
something go wrong Abort() aborts the transaction freeing up all
memory allocated by transaction.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The public virSecret object has a single "usage_id" field
but the virSecretDef object has a different 'char *' field
for each usage type, but the code all assumes every usage
type has a corresponding single string. Get rid of the
pointless union in virSecretDef and just use "usage_id"
everywhere. This doesn't impact public XML format, only
the internal handling.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
When changing the metadata via virDomainSetMetadata, we now
emit an event to notify the app of changes. This is useful
when co-ordinating different applications read/write of
custom metadata.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently when spawning containers with systemd, the container PID 1
will get moved into the systemd machine slice. Libvirt then manually
moves the libvirt_lxc and qemu-nbd processes into the cgroups associated
with the slice, but skips the systemd controller cgroup. This means that
from systemd's POV, libvirt_lxc and qemu-nbd are still part of the
libvirtd.service unit.
On systemctl daemon-reload, it will notice that libvirt_lxc & qemu-nbd
are in the libvirtd.service unit for the systemd controller, but in the
machine cgroups for resources. Systemd will thus move them back into
the libvirtd.service resource cgroups next time libvirtd is restarted.
This causes libvirtd to kill off the container due to incorrect cgroup
placement.
The solution is to ensure that when moving libvirt_lxc & qemu-nbd, we
also move the systemd cgroup controller placement. Normally this is
not something we ever want todo, but this is a special case as we are
intentionally wanting to move them to a different systemd unit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1349696
When creating a vHBA, the process is to feed XML to nodeDeviceCreateXML
that lists the <parent> scsi_hostX to use to create the vHBA. However,
between reboots, it's possible that the <parent> changes its scsi_hostX
to scsi_hostY and saved XML to perform the creation will either fail or
create a vHBA using the wrong parent.
So add the ability to provide "wwnn" and "wwpn" or "fabric_wwn" to
the <parent> instead of a name of the scsi_hostN that is the parent.
The allowed XML will thus be:
<parent>scsi_host3</parent> (current)
or
<parent wwnn='$WWNN' wwpn='$WWPN'/>
or
<parent fabric_wwn='$WWNN'/>
Using the wwnn/wwpn or fabric_wwn ensures the same 'scsi_hostN' is
selected between hardware reconfigs or host reboots. The fabric_wwn
Using the wwnn/wwpn pair will provide the most specific search option,
while fabric_wwn will at least ensure usage of the same SAN, but maybe
not the same scsi_hostN.
This patch will add the new fields to the nodedev.rng for input purposes
only since the input XML is essentially thrown away, no need to Format
the values since they'd already be printed as part of the scsi_host
data block.
New API virNodeDeviceGetParentHostByWWNs will take the parent "wwnn" and
"wwpn" in order to search the list of devices for matching capability
data fields wwnn and wwpn.
New API virNodeDeviceGetParentHostByFabricWWN will take the parent "fabric_wwn"
in order to search the list of devices for matching capability data field
fabric_wwn.
If a <parent> is not supplied in the XML used to create a non-persistent
vHBA, then instead of failing, let's try to find a "vports" capable node
device and use that.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Clang 3.9 refuses to compile the existing code with the
following error:
util/virfirewall.c:425:20: error: passing an object that undergoes
default argument promotion to 'va_start'
has undefined behavior [-Werror,-Wvarargs]
va_start(args, layer);
^
util/virfirewall.c:420:37: note: parameter of type 'virFirewallLayer'
is declared here
virFirewallLayer layer,
^
This happens because 'layer' is of type virFirewallLayer, which
is an enum type and not a standard type such as eg. void* or int.
To solve the issue, turn virFirewallAddRule() from a very thin
wrapper around virFirewallAddRuleFullV() to a macro that expands
to a call to virFirewallAddRuleFull() - itself a very thin wrapper
around the aforementioned virFirewallAddRuleFullV() - with no loss
of functionality or type safety.
This function will be needed by the QEMU driver in an upcoming
patch. Additionally, removed a useless empty line.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
The API creates PTR domain which corresponds to a given addr/prefix.
Both IPv4 and IPv6 addresses are supported, but the prefix must be
divisible by 8 for IPv4 and divisible by 4 for IPv6.
The generated PTR domain has the following format
IPv4: 1.2.3.4.in-addr.arpa
IPv6: 0.1.2.3.4.5.6.7.8.9.a.b.c.d.e.f.0.1.2.3.4.5.6.7.8.9.a.b.c.d.e.f.ip6.arpa
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
These helpers will manage the log destination defaults (fetch/set). The reason
for this is to stay consistent with the current daemon's behaviour with respect
to /etc/libvirt/<daemon>.conf file, since both assignment of an empty string
or not setting the log output variable at all trigger the daemon's decision on
the default log destination which depends on whether the daemon runs daemonized
or not.
This patch also changes the logic of the selection of the default
logging output compared to how it is done now. The main difference though is
that we should only really care if we're running daemonized or not, disregarding
the fact of (not) having a TTY completely (introduced by commit eba36a3878) as
that should be of the libvirtd's parent concern (what FD it will pass to it).
Before:
if (godaemon || !hasTTY):
if (journald):
use journald
if (godaemon):
if (privileged):
use SYSCONFIG/libvirtd.log
else:
use XDG_CONFIG_HOME/libvirtd.log
else:
use stderr
After:
if (godaemon):
if (journald):
use journald
else:
if (privileged):
use SYSCONFIG/libvirtd.log
else:
use XDG_CONFIG_HOME/libvirtd.log
else:
use stderr
Signed-off-by: Erik Skultety <eskultet@redhat.com>
We will need this function in near future so that we know what
/dev device corresponds to the SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need this function in near future so that we know what
/dev device corresponds to the SCSI device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We will need this function in near future so that we know what
/dev device corresponds to the USB device.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Namely, virFileGetACLs, virFileSetACLs, virFileFreeACLs and
virFileCopyACLs. These functions are going to be required when we
are creating /dev for qemu. We have copy anything that's in
host's /dev exactly as is. Including ACLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The functions to retrieve online and present host CPU information
are only supported on Linux for the time being.
This leads to runtime errors if these function are used on other
platforms. To avoid that, code in higher levels using the functions
must replicate the conditional compilation in higher level which
is error prone (and is plainly spoken ugly).
Adding a function virHostCPUHasBitmap that can be used to check
for host CPU bitmap support.
NB: There are other functions including the host CPU count that
are lacking support on all platforms, but they are too essential
in order to be bypassed.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfo to get capacity specific data
about the storage backing source or volume -- create a common API
to handle the details for both.
As a side effect, virStorageFileProbeFormatFromBuf returns to being
a local/static helper to virstoragefile.c
For the QEMU code - if the probe is done, then the format is saved so
as to avoid future such probes.
For the storage backend code, there is no need to deal with the probe
since we cannot call the new API if target->format == NONE.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Instead of having duplicated code in qemuStorageLimitsRefresh and
virStorageBackendUpdateVolTargetInfoFD to fill in the storage backing
source or volume allocation, capacity, and physical values - create a
common API that will handle the details for both.
The common API will fill in "default" capacity values as well - although
those more than likely will be overridden by subsequent code. Having just
one place to make the determination of what the values should be will
make things be more consistent.
For the QEMU code - the data filled in will be for inactive domains
for the GetBlockInfo and DomainGetStatsOneBlock API's. For the storage
backend code - the data will be filled in during the volume updates.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Commit id '8dc27259' introduced virStorageSourceUpdateBlockPhysicalSize
in order to retrieve the physical size for a block backed source device
for an active domain since commit id '15fa84ac' changed to use the
qemuMonitorGetAllBlockStatsInfo and qemuMonitorBlockStatsUpdateCapacity
API's to (essentially) retrieve the "actual-size" from a 'query-block'
operation for the source device.
However, the code only was made functional for a BLOCK backing type
and it neglected to use qemuOpenFile, instead using just open. After
the open the block lseek would find the end of the block and set the
physical value, close the fd and return.
Since the code would return 0 immediately if the source device wasn't
a BLOCK backed device, the physical would be displayed incorrectly,
such as follows in domblkinfo for a file backed source device:
Capacity: 1073741824
Allocation: 0
Physical: 0
This patch will modify the algorithm to get the physical size for other
backing types and it will make use of the qemuDomainStorageOpenStat
helper in order to open/stat the source file depending on its type.
The qemuDomainGetStatsOneBlock will no longer inhibit printing errors,
but it will still ignore them leaving the physical value set to 0.
Signed-off-by: John Ferlan <jferlan@redhat.com>
In preparation to the code move to virnetdevtap.c, this change:
* renames virNetInterfaceStats to virNetDevTapInterfaceStats
* changes 'path' to 'ifname', to use the same vocable as other
method in virnetdevtap.c.
* Add the attributes checker
When vhostuser interfaces are used, the interface statistics
are not available in /proc/net/dev.
This change looks at the openvswitch interfaces statistics
tables to provide this information for vhostuser interface.
Note that in openvswitch world drop/error doesn't always make sense
for some interface type. When these informations are not available we
set them to 0 on the virDomainInterfaceStats.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since its introduction in 2012 this internal API did nothing.
Moreover we have the same API that does exactly the same:
virSecurityManagerDomainSetPathLabel.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This module will be used to track:
<domain, mac address list>
pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There are couple of places where we have a string and want to
save it to a file. Atomically. In all those places we use
virFileRewrite() but also implement the very same callback which
takes the string and write it into temp file. This makes no
sense. Unify the callbacks and move them to one place.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The path to the config file for a PCI device is conventiently stored
in a virPCIDevice object, but that object's contents aren't directly
visible outside of virpci.c, so we need to have an accessor function
for it if anyone needs to look at it.
This new function just calls fstat() (if provided with a valid fd) or
stat() (if fd is -1) and returns st_size (or -1 if there is an
error). We may decide we want this function to be more complex, and
handle things like block devices - this is a placeholder (that works)
for any more complicated function.
We have couple of functions that operate over NULL terminated
lits of strings. However, our naming sucks:
virStringJoin
virStringFreeList
virStringFreeListCount
virStringArrayHasString
virStringGetFirstWithPrefix
We can do better:
virStringListJoin
virStringListFree
virStringListFreeCount
virStringListHasString
virStringListGetFirstWithPrefix
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests. Provide the basic infrastructure
for these tasks.
The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Add the function virHostdevIsSCSIDevice() which detects whether a
hostdev is a SCSI device or not.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
PPC driver needs to convert POWERx_v* legacy CPU model names into POWERx
to maintain backward compatibility with existing domains. This patch
adds a new step into the guest CPU configuration work flow which CPU
drivers can use to convert legacy CPU definitions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When starting a new domain, we allocate the USB addresses and keep
an address cache in the domain object's private data.
However this data is lost on libvirtd restart.
Also generate the address cache if all the addresses have been
specified, so that devices hotplugged after libvirtd restart
also get theirs assigned.
https://bugzilla.redhat.com/show_bug.cgi?id=1387666
This time do not require an address cache as a parameter.
Simplify qemuDomainAttachChrDeviceAssignAddr to not generate
the virtio serial address cache for devices of other types.
Partially reverts commit 925fa4b.
Commit 19a148b dropped the cache from QEMU's private domain object.
Assume the callers do not have the cache by default and use
a longer name for the internal ones that do.
This makes the shorter 'virDomainVirtioSerialAddrAutoAssign'
name availabe for a function that will not require the cache.
There is an existing virDomainPCIAddressReserveNextSlot() which will
reserve all functions of the next available PCI slot. One place in the
qemu PCI address assignment code requires reserving a *single*
function of the next available PCI slot. This patch modifies and
renames virDomainPCIAddressReserveNextSlot() so that it can fulfill
both the original purpose and the need to reserve a single function.
(This is being done so that the abovementioned code in qemu can have
its "kind of open coded" solution replaced with a call to this new
function).
This new function can be used to check if e.g. name of XML
node don't contains forbidden chars like "/" or "\n".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Make sure that the topology results into a sane number of cpus (up to
UINT_MAX) so that it can be sanely compared to the vcpu count of the VM.
Additionally the helper added in this patch allows to fetch the total
number the topology results to so that it does not have to be
reimplemented later.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1378290
This is mainly virLogAddOutputTo* which were replaced by virLogNewOutputTo* and
the previously poorly named ones virLogParseAndDefine* functions. All of these
are unnecessary now, since all the original callers were transparently switched
to the new model of separate parsing and defining logic.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This method will eventually replace virLogParseAndDefineFilters which
currently does both parsing and defining.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This API is the entry point to output modification of the logger. Currently,
everything is done by virLogParseAndDefineOutputs. Parsing and defining will be
split into two operations both handled by this method transparently.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Abstraction added over parsing a single filter. The method parses potentially a
set of logging filters, while adding each filter logging object to a
caller-provided array.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Another abstraction added on the top of parsing a single logging output. This
method takes and parses the whole set of outputs, adding each single output
that has already been parsed into a caller-provided array. If the user-supplied
string contained duplicate outputs, only the last occurrence is taken into
account (all the others are removed from the list), so we silently avoid
duplicate logs.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Same as for outputs, introduce a new method, that is basically the same as
virLogParseAndDefineFilter with the difference that it does not define the
filter. It rather returns a newly created object that needs to be inserted into
a list and then defined separately.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Introduce a method to parse an individual logging output. The difference
compared to the virLogParseAndDefineOutput is that this method does not define
the output, instead it makes use of the virLogNewOutputTo* methods introduced
in the previous patch and just returns the virLogOutput object that has to be
added to a list of object which then can be defined as a whole via
virLogDefineOutputs. The idea remains still the same - split parsing and
defining of the logging primitives (outputs, filters).
Additionally, since virLogNewOutputTo* methods are now finally used,
ATTRIBUTE_UNUSED can be successfully removed from the methods' definitions,
since that was just to avoid compiler complaints about unused static functions.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
