Commit Graph

8879 Commits

Author SHA1 Message Date
Peter Krempa
0763a26dfe bridge_driver: Don't define network if XML contains more IPv4 adreses.
Only one IPv4 DHCP definition is supported. Originally the code checked
for a multiple definition and returned an error, but the new domain
definition was already added to networks. This patch moves the check
before the newly defined network is added to active networks.

 *src/network/bridge_driver.c: networkDefine(): - move multiple IPv4
                                                  addresses check before
                                                  definition is used.
2011-12-01 09:35:43 +01:00
Eric Blake
764574f7c7 spec: mark directories in /var/run as ghosts
We have several directories that are created on the fly, and which
only contain state relevant to a running libvirtd process (all
located in /var/run).  Since the directories are created as needed,
and make no sense without a running libvirtd, we want them deleted
if libvirt is uninstalled.  And in F15 and newer, /var/run is on
tmpfs (forcing us to recreate on the fly); which means that someone
trying to verify a complete rpm will fail if the directory does not
currently exist because libvirtd has not been started since boot.
The solution, then, is to mark the directories as %ghost, so that
rpm knows that we own them and will clean it up if libvirt is
uninstalled, but will no longer create the directory for us at
install, nor complain at verify time if the directory does not exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=656611.

* libvirt.spec.in (%files): Add %ghost to temporary directories
that we don't install, but want cleaned up on libvirt removal.
2011-12-01 10:56:10 +08:00
Jiri Denemark
cb1e7b61c8 virsh: Fix possible deadlock when virsh is about to exit
Not only was ctl->quit accessed without a mutex but unfortunately,
virEventAddTimeout only interrupts the poll when event loop is running
so the hack needs to add a timeout that will make next poll return
immediately without blocking.
2011-12-01 10:34:43 +08:00
Alex Jia
4c8327994c util: Plug memory leak on virNetDevMacVLanCreateWithVPortProfile() error path
Detected by Coverity. Leak introduced in commit 90074ec.

Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 16:57:08 -07:00
Alex Jia
5483e5736d util: Plug memory leak on virNetDevBridgeGet() sucessful path
Detected by Coverity. Leak introduced in commit c1df2c1.

Two bugs here:
1. memory leak on successful parse
2. failure to parse still returned success

Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 16:47:03 -07:00
Alex Jia
d7cc2520f2 uml: Plug memory leak on umlStartVMDaemon() error path
Detected by Coverity.  Leak introduced in commit 8866eed.

Two bugs here:
1. logfd wasn't closed on all return paths
2. if we failed to mark a domain autodestroy, then the domain
was not made transient but we still returned success

Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 16:37:35 -07:00
Alex Jia
773a4ea5e1 rpc: Plug memory leak on virNetClientSendInternal() error path
Detected by Coverity. Leak introduced in commit 673adba.

Two separate bugs here:
1. call was not freed on all error paths
2. virCondDestroy was called even if virCondInit failed

Signed-off-by: Alex Jia <ajia@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 16:23:18 -07:00
Alex Jia
ad8fa356a6 conf: Plug memory leak on virDomainDefParseXML() error path
Detected by Coverity. Leak introduced in commit 0873b68.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-11-30 15:09:31 -07:00
Alex Jia
7b811a74c6 qemu: Plug memory leak onqemuProcessWaitForMonitor() error path
Detected by Coverity. Leak introduced in commit 109efd7.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-11-30 14:39:36 -07:00
Prerna Saxena
f9bb67ec6a Add PPC cpu driver.
To add support for running libvirt on PowerPC, a CPU driver for the
PowerPC platform must be added.
Most generic cpu driver routines such as CPU compare, decode, etc
are based on CPUID comparison and are not relevant for non-x86
platforms.
Here, we introduce stubs for relevant PowerPC routines invoked by libvirt.

Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@au.ibm.com>
2011-11-30 12:38:17 -07:00
Hu Tao
25a5f07c69 qemu: filter blkio 0-device-weight at two other places
filter 0-device-weight when:

  - getting blkio parameters with --config
  - starting up a domain

When testing with blkio, I found these issues:

  (dom is down)
  virsh blkiotune dom --device-weights /dev/sda,300,/dev/sdb,500
  virsh blkiotune dom --device-weights /dev/sda,300,/dev/sdb,0
  virsh blkiotune dom
  weight         : 800
  device_weight  : /dev/sda,200,/dev/sdb,0

  # issue 1: shows 0 device weight of /dev/sdb that may confuse user

  (continued)
  virsh start dom

  # issue 2: If /dev/sdb doesn't exist, libvirt refuses to bring the
  # dom up because it wants to set the device weight to 0 of a
  # non-existing device. Since 0 means no weight-limit, we really don't
  # have to set it.
2011-11-30 12:34:30 -07:00
Eric Blake
22cf6d46f4 qemu: amend existing table of device weights
Prior to this patch, for a running dom, the commands:

$ virsh blkiotune dom --device-weights /dev/sda,502,/dev/sdb,498
$ virsh blkiotune dom --device-weights /dev/sda,503
$ virsh blkiotune dom
weight         : 500
device_weight  : /dev/sda,503

claim that /dev/sdb no longer has a non-default weight, but
directly querying cgroups says otherwise:

$ cat /cgroup/blkio/libvirt/qemu/dom/blkio.weight_device
8:0     503
8:16    498

After this patch, an explicit 0 is required to remove a device path
from the XML, and omitting a device path that was previously
specified leaves that device path untouched in the XML, to match
cgroups behavior.

* src/qemu/qemu_driver.c (parseBlkioWeightDeviceStr): Rename...
(qemuDomainParseDeviceWeightStr): ...and use correct type.
(qemuDomainSetBlkioParameters): After parsing string, modify
rather than replacing existing table.
* tools/virsh.pod (blkiotune): Tweak wording.
2011-11-30 12:18:18 -07:00
Eric Blake
9b524ff040 conf: reject duplicate paths in device weights
The next patch will make it possible to have virDomainSetBlkioParameters
leave device weights unchanged if they are not mentioned in the incoming
string, but this only works if the list of block weights does not allow
duplicate paths.  Technically, a user can still confuse libvirt by
passing alternate spellings that resolve to the same device, but it
is not worth worrying about working around that kind of abuse.

* src/conf/domain_conf.c (virDomainDefParseXML): Require unique
paths.
2011-11-30 12:15:22 -07:00
Hu Tao
7e976db4ea virsh: fix setting weight and device-weights at the same time
When setting both blkio weight and device-weights at the same time, the weight
is lost. Fix it.
2011-11-30 12:11:25 -07:00
Lei Li
55ecc49bbc Add tests for blkdeviotune
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:11 -07:00
Lei Li
62a19475d2 Support virDomain{Set, Get}BlockIoTune in the python API
Python support for both setting and getting block I/O throttle.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:11 -07:00
Lei Li
e9bd9a0809 Enable the blkdeviotune command in virsh
Support virsh command blkdeviotune. Can set or query a block disk
I/O throttle setting.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:11 -07:00
Lei Li
eca96694a7 Implement virDomain{Set, Get}BlockIoTune for the qemu driver
Implement the block I/O throttle setting and getting support to qemu
driver.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:10 -07:00
Lei Li
6df7ccb10e Support block I/O throttle in XML
Enable block I/O throttle for per-disk in XML, as the first
per-disk IO tuning parameter.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:09 -07:00
Lei Li
115a2a3fbb Add virDomain{Set, Get}BlockIoTune support to the remote driver
Support Block I/O Throttle setting and query to remote driver.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-30 11:36:09 -07:00
Daniel P. Berrange
87e8ff1be1 Fix leak build config file path
* src/libvirt.c: Free user directory path
2011-11-30 11:43:50 +00:00
Daniel P. Berrange
a8bb75a3e6 Remove time APIs from src/util/util.h
The virTimestamp and virTimeMs functions in src/util/util.h
duplicate functionality from virtime.h, in a non-async signal
safe manner. Remove them, and convert all code over to the new
APIs.

* src/util/util.c, src/util/util.h: Delete virTimeMs and virTimestamp
* src/lxc/lxc_driver.c, src/qemu/qemu_domain.c,
  src/qemu/qemu_driver.c, src/qemu/qemu_migration.c,
  src/qemu/qemu_process.c, src/util/event_poll.c: Convert to use
  virtime APIs
2011-11-30 11:43:50 +00:00
Daniel P. Berrange
32d3ec7466 Make logging async signal safe wrt time stamp generation
Use the new virTimeStringNowRaw() API for generating log timestamps
in an async signal safe manner

* src/util/logging.c: Use virTimeStringNowRaw
2011-11-30 11:43:50 +00:00
Daniel P. Berrange
3ec1289896 Add internal APIs for dealing with time
The logging APIs need to be able to generate formatted timestamps
using only async signal safe functions. This rules out using
gmtime/localtime/malloc/gettimeday(!) and much more.

Introduce a new internal API which is async signal safe.

  virTimeMillisNowRaw replacement for gettimeofday. Uses clock_gettime
                      where available, otherwise falls back to the unsafe
                      gettimeofday

  virTimeFieldsNowRaw  replacements for gmtime(), convert a timestamp
  virTimeFieldsThenRaw into a broken out set of fields. No localtime()
                       replacement is provided, because converting to
                       local time is not practical with only async signal
                       safe APIs.

  virTimeStringNowRaw  replacements for strftime() which print a timestamp
  virTimeStringThenRaw into a string, using a pre-determined format, with
                       a fixed size buffer (VIR_TIME_STRING_BUFLEN)

For each of these there is also a version without the Raw postfix
which raises a full libvirt error. These versions are not async
signal safe

* src/Makefile.am, src/util/virtime.c, src/util/virtime.h: New files
* src/libvirt_private.syms: New APis
* configure.ac: Check for clock_gettime in -lrt
* tests/virtimetest.c, tests/Makefile.am: Test new APIs
2011-11-30 11:43:49 +00:00
Daniel P. Berrange
380110cf08 Remove obsolete virGetPMCapabilities sym from private symbols file
Fix the build on Mingw32 by removing the now obsolete
virGetPMCapabilities symbol from the private exports file

* src/libvirt_private.syms: Remove virGetPMCapabilities
2011-11-30 11:42:57 +00:00
Daniel P. Berrange
a82ed6a0c3 Don't mark suspend as active until we know it is running
If suspend failed for some reason (e.g. too short duration) then
subsequent attempts to trigger suspend were rejected because we
had already marked a suspend as being in progress

* src/util/virnodesuspend.c: Don't mark suspend as active
  until we've successfully triggered it
2011-11-30 10:12:30 +00:00
Daniel P. Berrange
9ae0b8349c Add suspend info to Xen, LXC and UML hypervisor capabilities
* src/lxc/lxc_conf.c, src/uml/uml_conf.c,
  src/xen/xen_hypervisor.c: Initialize suspend capabilities
* tests/xencapsdata/*xml: Add empty powermgmt capabilities
2011-11-30 10:12:30 +00:00
Daniel P. Berrange
8c60bc169f Remove pointless strdup in node suspend code
The command name for the suspend action does not need to be
strdup'd. The constant string can be used directly. This
also means the code can be trivially rearranged to make the
switch clearer

* src/util/virnodesuspend.c: Remove strdup of cmdString
2011-11-30 10:12:30 +00:00
Daniel P. Berrange
2fc056c1ba Do lazy init of host PM features
To avoid probing the host power management features on any
call to virInitialize, only initialize the mutex in
virNodeSuspendInit. Do lazy load of the supported PM target
mask when it is actually needed

* src/util/virnodesuspend.c: Lazy init of supported features
2011-11-30 10:12:30 +00:00
Daniel P. Berrange
f1f28611f1 Remove powerMgmt_valid field from capabilities struct
If we ensure that virNodeSuspendGetTargetMask always resets
*bitmask to zero upon failure, there is no need for the
powerMgmt_valid field.

* src/util/virnodesuspend.c: Ensure *bitmask is zero upon
  failure
* src/conf/capabilities.c, src/conf/capabilities.h: Remove
  powerMgmt_valid field
* src/qemu/qemu_capabilities.c: Remove powerMgmt_valid
2011-11-30 10:12:30 +00:00
Daniel P. Berrange
f5272027c3 Add export of node suspend capabilities APIs
* src/libvirt_private.syms: Export virNodeSuspendSupportsTarget
  and virNodeSuspendGetTargetMask
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
c92653f4dd Move suspend capabilities APIs out of util.h into virnodesuspend.c
The node suspend capabilities APIs should not have been put into
util.[ch]. Instead move them into virnodesuspend.[ch]

* src/util/util.c, src/util/util.h: Remove suspend capabilities APIs
* src/util/virnodesuspend.c, src/util/virnodesuspend.h: Add
  suspend capabilities APIs
* src/qemu/qemu_capabilities.c: Include virnodesuspend.h
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
53c2aad88b Rename suspend capabilities APIs
Rename virGetPMCapabilities to virNodeSuspendGetTargetMask and
virDiscoverHostPMFeature to virNodeSuspendSupportsTarget.

* src/util/util.c, src/util/util.h: Rename APIs
* src/qemu/qemu_capabilities.c, src/util/virnodesuspend.c: Adjust
  for new names
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
33386276a9 Sanitize virDiscoverHostPMFeature to return a boolean
Since virDiscoverHostPMFeature is just checking one feature,
there is no reason for it to return a bitmask. Change it to
return a boolean

* src/util/util.c, src/util/util.h: Make virDiscoverHostPMFeature
  return a boolean
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
6ea25cd975 Move the virHostPMCapability enum helpers into capabilities.c
The virHostPMCapability enum helper was declared in util.h
but implemented in capabilities.c, which is in a completely
separate library at link time. Move the declaration into the
capabilities.c file and rename it to match normal conventions

* src/util/util.h: Remove virHostPMCapability enum decl
* src/conf/capabilities.c: Add virCapsHostPMTarget enum
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
ae5e55289d Fix capabilities XML to use generic terms for suspend targets
The capabilities XML uses the x86 specific terms 'S3', 'S4'
and 'Hybrid-Syspend'. Switch it to use the same terminology
as the API constants and virsh options, eg 'suspend_mem'
'suspend_disk' and 'suspend_hybrid'

* docs/formatcaps.html.in, docs/schemas/capability.rng,
  src/conf/capabilities.c: Rename suspend constants
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
6fb5400fc6 Remove internal only virHostPMCapability enum
The internal virHostPMCapability enum just duplicates the
public virNodeSuspendTarget enum, but with different names.

* src/util/util.c: Use VIR_NODE_SUSPEND_TARGET constants
* src/util/util.h: Remove virHostPMCapability enum
* src/conf/capabilities.c: Use VIR_NODE_SUSPEND_TARGET_LAST
2011-11-30 10:12:29 +00:00
Daniel P. Berrange
866b0a7069 Fix values of PM target type constants
The VIR_NODE_SUSPEND_TARGET constants are not flags, so they
should just be assigned straightforward incrementing values.

* include/libvirt/libvirt.h.in: Change VIR_NODE_SUSPEND_TARGET
  values
* src/util/virnodesuspend.c: Fix suspend target checks
2011-11-30 10:12:29 +00:00
Alex Jia
a001a5e28b util: avoid null deref on qcowXGetBackingStore
Detected by Coverity. the only case is caller passes a NULL to 'format' variable,
then taking 'if (format)' false branch, the function qcow2GetBackingStoreFormat
will directly dereferences the NULL 'format' pointer variable.

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-11-30 11:05:13 +01:00
Alex Jia
d082e1b966 virsh: correct return value error
Fix cmdDomblklist to return 'true' on success instead of '0'

https://bugzilla.redhat.com/show_bug.cgi?id=758590

Signed-off-by: Alex Jia <ajia@redhat.com>
2011-11-30 11:04:13 +01:00
Lei Li
1f8a339dee Add new API virDomain{Set, Get}BlockIoTune
This patch add new pulic API virDomainSetBlockIoTune and
virDomainGetBlockIoTune.

Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-29 17:29:33 -07:00
Hu Tao
93ab58595d blkiotune: add qemu support for blkiotune.device_weight
Implement setting/getting per-device blkio weights in qemu,
using the cgroups blkio.weight_device tunable.
2011-11-29 12:26:21 -07:00
Hu Tao
6ac81c8ec8 blkiotune: add interface for blkiotune.device_weight
This adds per-device weights to <blkiotune>.  Note that the
cgroups implementation only supports weights per block device,
and not per-file within the device; hence this option must be
global to the domain definition rather than tied to individual
<devices>/<disk> entries:

<domain ...>
  <blkiotune>
    <device>
      <path>/path/to/block</path>
      <weight>1000</weight>
    </device>
  </blkiotune>
..

This patch also adds a parameter --device-weights to virsh command
blkiotune for setting/getting blkiotune.weight_device for any
hypervisor that supports it.  All <device> entries under
<blkiotune> are concatenated into a single string attribute under
virDomain{Get,Set}BlkioParameters, named "device_weight".

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2011-11-29 12:26:21 -07:00
Eric Blake
659ded58ed qemu: fix blkiotune --live --config
Without this,  'virsh blkiotune --live --config --weight=n'
only affected live.

* src/qemu/qemu_driver.c (qemuDomainSetBlkioParameters): Allow
setting both configurations at once.
2011-11-29 10:54:29 -07:00
Eric Blake
51727c1dc0 qemu, lxc: drop redundant checks
After the previous patch, there are now some redundant checks.

* src/qemu/qemu_driver.c (qemudDomainGetVcpuPinInfo)
(qemuGetSchedulerParametersFlags): Drop checks now guaranteed by
libvirt.c.
* src/lxc/lxc_driver.c (lxcGetSchedulerParametersFlags):
Likewise.
2011-11-29 10:54:29 -07:00
Eric Blake
4199f3de2e API: prevent query of --live and --config at once
Drivers were inconsistent when presented both --live and --config
at once.  For example, within qemu, getting memory parameters
favored live, getting blkio tuning favored config, and getting
scheduler parameters errored out.  Also, some, but not all,
attempts to mix flags on query were filtered at the virsh level.
We shouldn't have to duplicate efforts in every client app, nor
in every driver.  So, it is simpler to just enforce that the two
flags cannot both be used at once on query operations, which has
precedent in libvirt.c, and which matches the documentation of
virDomainModificationImpact.

* src/libvirt.c (virDomainGetMemoryParameters)
(virDomainGetBlkioParameters)
(virDomainGetSchedulerParametersFlags, virDomainGetVcpuPinInfo):
Borrow sanity checking from virDomainGetVcpusFlags.
2011-11-29 10:53:26 -07:00
Eric Blake
80eaa56561 build: fix typo in last patch
* src/remote_protocol-structs: Use correct RPC name.
2011-11-29 09:48:43 -07:00
Osier Yang
2524c8434b block_resize: Update test file for RPC
Pushed under build failure rule.
2011-11-29 23:18:30 +08:00
Osier Yang
72908c7403 block_resize: Expose the new API to virsh 2011-11-29 21:45:22 +08:00
Osier Yang
d1a6c77aca block_resize: Implement qemu driver method
It requires the domain is running, otherwise fails. Resize to a lower
size is supported, but should be used with extreme caution.

In order to prohibit the "size" overflowing after multiplied by
1024. We do checking in the codes. For QMP mode, the default units
is Bytes, the passed size needs to be multiplied by 1024, however,
for HMP mode, the default units is "Megabytes", the passed "size"
needs to be divided by 1024 then.
2011-11-29 21:45:18 +08:00