Commit Graph

1131 Commits

Author SHA1 Message Date
Jiri Denemark
bbcfa07bea qemu: Pass correct qemuCaps to virDomainDefCopy
Since qemuDomainDefPostParse callback requires qemuCaps, we need to make
sure it gets the capabilities stored in the domain's private data if the
domain is running. Passing NULL may cause QEMU capabilities probing to
be triggered in case QEMU binary changed in the meantime. When this
happens while a running domain object is locked, QMP event delivered to
the domain before QEMU capabilities probing finishes will deadlock the
event loop.

Several general functions from domain_conf.c were lazily passing NULL as
the parseOpaque pointer instead of letting their callers pass the right
data. This patch fixes all paths leading to virDomainDefCopy to do the
right thing.

Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2019-08-09 13:55:54 +02:00
Michal Privoznik
610858d282 qemu_domain: Separate VFIO code
This piece of code will be re-used later.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
2019-08-06 11:21:43 +02:00
Eric Blake
b736619f6e backup: Add list of checkpoints to domain
Wire up the use of a checkpoint list into each domain, similar to the
existing snapshot list.  This includes adding a function for checking
that a redefine operation fits in with the existing list, as well as
various filtering capabilities over the list contents.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 16:48:58 -05:00
Stefan Berger
c0533b6552 conf: Remove ATTRIBUTE_NONNULL(2) from virDomainCheckDeviceChanges()
Since we are checking the 2nd parameter in the function for NULL,
we need to remove ATTRIBUTE_NONNULL(2) from the prototype.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Message-Id: <20190726205633.2041912-5-stefanb@linux.vnet.ibm.com>
2019-07-26 16:32:29 -05:00
Stefan Berger
94b3aa55f8 tpm: Check TPM XML device configuration changes after edit
Since swtpm does not support getting started without password
once it was created with encryption enabled, we don't allow
encryption to be removed. Similarly, we do not allow encryption
to be added once swtpm has run. We also prevent chaning the type
of the TPM backend since the encrypted state is still around and
the next time one was to switch back to the emulator backend
and forgot the encryption the TPM would not work.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 10:30:59 +01:00
Stefan Berger
fc60a0c78e conf: Extend TPM XML parser with encryption support
Extend the TPM device XML parser and XML generator with emulator
state encryption support.

Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-26 09:59:27 +01:00
Ján Tomko
cd0b6aa406 conf: remove reference to VIR_DOMAIN_RNG_BACKEND_POOL
Sadly, this idea never got implemented.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-07-25 15:06:15 +02:00
Ján Tomko
4764d1b125 conf: remove outdated comment
When using the ENUM macros, the compiler guards that the declaration
and implementation are in sync.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
2019-07-25 15:06:15 +02:00
Peter Krempa
7a264536a6 conf: export virDomainDiskBackingStoreFormat
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Peter Krempa
32e4857b4e conf: export virDomainDiskBackingStoreParse
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-07-18 17:59:34 +02:00
Jonathon Jongsma
e579f5300b qemu: add 'bochs' video display type
Update schema and configuration to allow specifying new video type of
'bochs'. Add implementation and tests for qemu.

Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-07-15 10:21:21 +02:00
Peter Krempa
ca62170e8c conf: Add taint flag for custom hypervisor features
Upcoming patches will allow enabling/disabling custom hypervisor
features for debugging/testing purposes via the qemu namespace.

Add a taint flag where we will flag such a domain so it's obvious what's
happening.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-21 15:24:06 +02:00
Daniel P. Berrangé
fe77197304 conf: switch over to use network port APIs for virt drivers
Change the domain conf so invoke the new network port public APIs instead
of the network callbacks.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:45:13 +01:00
Daniel P. Berrangé
90064d76bc conf: record a portid against the domain conf
The portid will be the UUID of the virNetworkPort object associated
with the network interface when a guest is running.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:45:09 +01:00
Daniel P. Berrangé
f02e21cb33 network: remove the virDomainNetBandwidthChangeAllowed callback
The current qemu driver code for changing bandwidth on a NIC first asks
the network driver if the change is supported, then changes the
bandwidth on the VIF, and then tells the network driver to update the
bandwidth on the bridge.

This is potentially racing if a parallel API call causes the network
driver to allocate bandwidth on the bridge between the check and the
update phases.

Change the code to just try to apply the network bridge update
immediately and rollback at the end if something failed.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:19:54 +01:00
Daniel P. Berrangé
200bfd43ba conf: add APIs to convert virDomainNetDef to virNetworkPortDef
Helper APIs are needed to

 - Populate basic virNetworkPortDef from virDomainNetDef
 - Set a virDomainActualNetDef from virNetworkPortDef
 - Populate a full virNetworkPortDef from virDomainActualNetDef

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-06-17 15:19:54 +01:00
Jonathon Jongsma
b268e87319 conf: domain: use #pragma once in headers
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-06-13 17:05:08 +02:00
Andrea Bolognani
60f4c41377 conf: Parse and format SMMUv3 IOMMU
SMMUv3 is an IOMMU implementation for ARM virt guests.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-06-03 17:40:48 +02:00
Eric Blake
1ec3e39742 conf: Add parameter to virDomainDiskSourceFormat
Commits 4bc42986 and 218c81ea removed virDomainStorageSourceFormat on
the grounds that there were no external callers; however, the upcoming
backup code wants to output a <target> (push mode) or <scratch> (pull
mode) element that is in all other respects identical to a domain's
<source> element, where the previous virDomainStorageSourceFormat fit
the bill nicely. But rather than reverting the commits, it's easier to
just add an additional parameter for the element name to use, and
update all callers.

Signed-off-by: Eric Blake <eblake@redhat.com>
2019-05-06 18:05:17 -05:00
Michal Privoznik
89237d534f conf: Expose virDomainSCSIDriveAddressIsUsed
This function checks if given drive address is already present in
passed domain definition. Expose the function as it will be used
shortly.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2019-04-18 17:04:33 +02:00
Daniel P. Berrangé
b806a60eaf network: move re-attach of bridge device out of network driver
During initial NIC setup the hypervisor drivers are responsible for
attaching the TAP device to the bridge device. Any fixup after libvirtd
restarts should thus also be their responsibility.

Reviewed-by: Laine Stump <laine@laine.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-18 13:10:26 +01:00
Eric Blake
df2ae0d042 snapshot: Allow for post-parse override
Wire up the accessor functions necessary for the testsuite to install
an alternative post-parse handler from normal drivers. I could have
modified the signature for virDomainXMLOptionNew() to take another
parameter, but thought it was easier to add a new set function rather
than chase down all existing callers. Until code actually sets the
override, there is no change in behavior.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 21:55:59 -05:00
Cole Robinson
84a5e89b31 conf: Add VIR_DOMAIN_DEF_FEATURE_NET_MODEL_STRING
This requires drivers to opt in to handle the raw modelstr
network model, all others will error if a passed in XML value
is not in the model enum.

Enable this feature for libxl/xen/xm and qemu drivers

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
17a1bd7eb9 vbox: Convert to net enum model
Convert the vbox driver to net model enum, which requires adding
enum values for Am79C970A, Am79C973, 82540EM, 82545EM, 82543GC. We
preserve the same casing that vbox historically used for these model
names.

Remove the now unused virDomainNetStrcaseeqModelString

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
848fdabdba vmx: convert to net model enum
Convert the vmware/vmx driver to net model enum, which requires
adding enum values for vlance, vmxnet, vmxnet2, and vmxnet3.

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
41b002f934 qemu: Partially convert to net model enum
This converts the qemu driver to the net model enum, for all
the model values that we have hardcoded for various checks,
which adds e1000e, virtio-transitional, virtio-non-transitional,
usb-net, spapr-vlan, lan9118, smc91c111

Because the qemu driver has historically also allowed the raw
model string onto the qemu command line, this isn't a full
conversion. Unwinding that will require more thought. However
for all new driver code we should be adding explicit enum
values for any model name we have special handling for.

Remove the now unused virDomainNetStreqModelString

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
0f8358555a vz: convert to net model enum
The vz driver only handles three models: virtio, e1000, and rtl8139.
Add enum values for those models, and convert the vz driver to
handling net->model natively

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
d79a2c079c conf: net: Add model enum, and netfront value
This adds a network model enum. The virDomainNetDef property
is named 'model' like most other devices.

When the XML parser or a driver calls NetSetModelString, if
the passed string is in the enum, we will set net->model,
otherwise we copy the string into net->modelstr

Add a single example for the 'netfront' xen model, and wire
that up, just to verify it's all working

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
aa3c9f34bf conf: net: Rename 'model' to 'modelstr'
We will be adding a 'model' enum in upcoming patches. Rename
the existing value to make the differentiation clear

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Cole Robinson
6bf7c67699 conf: net: Add wrapper functions for <model> value
To ease converting the net->model value to an enum, add
the wrapper functions:

virDomainNetGetModelString
virDomainNetSetModelString
virDomainNetStreqModelString
virDomainNetStrcaseeqModelString

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-04-16 13:11:08 -04:00
Daniel P. Berrangé
bbe2aa627f conf: simplify link from hostdev back to network device
hostdevs have a link back to the original network device. This is fairly
generic accepting any type of device, however, we don't intend to make
use of this approach in future. It can thus be specialized to network
devices.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-16 14:44:53 +01:00
Daniel P. Berrangé
e1d10f8ef2 network: pass a virNetworkPtr to port management APIs
The APIs for allocating/notifying/removing network ports just take
an internal domain interface struct right now. As a step towards
turning these into public facing APIs, add a virNetworkPtr argument
to all of them.

Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-04-16 14:44:53 +01:00
Martin Kletzander
842bc56ad2 conf: Add support for emulatorsched
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-16 13:46:17 +02:00
Peter Krempa
285c5f28c4 util: Move enum convertors into virenum.(c|h)
virutil.(c|h) is a very gross collection of random code. Remove the enum
handlers from there so we can limit the scope where virtutil.h is used.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-10 09:12:04 +02:00
Peter Krempa
18bc52bce0 conf: introduce virDomainStorageSourceParseBase
The helper converts the 'type', 'format' and index values to enum
values/numbers and does validation.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
dfaf170df5 conf: Replace virDomainDiskSourceParse by virDomainStorageSourceParse
virDomainDiskSourceParse was now just a thin wrapper without any extra
value. Replace all usage of it by the function it calls and remove the
function.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
4bc429868e conf: Unexport virDomainStorageSourceFormat
It's not used outside of src/conf/domain_conf.c

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
5f6f803ca1 conf: Merge virDomainDiskSourceFormatInternal into virDomainDiskSourceFormat
Remove the wrapper and fix callers.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Peter Krempa
6bee0262c7 conf: Remove @seclabels from virDomainStorageSourceFormat
All callers including transitive callers through
virDomainDiskSourceFormatInternal always pass true. Remove the argument.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-04-03 11:58:09 +02:00
Eric Blake
4819f54bd3 snapshot: Track current snapshot in virDomainSnapshotObjList
It is easier to track the current snapshot as part of the list of
snapshots. In particular, doing so lets us guarantee that the current
snapshot is cleared if that snapshot is removed from the list (rather
than depending on the caller to do so, and risking a use-after-free
problem, such as the one recently patched in 1db9d0efbf).  This
requires the addition of several new accessor functions, as well as a
useful return type for virDomainSnapshotObjListRemove().  A few error
handling sites that were previously setting vm->current_snapshot =
NULL can now be dropped, because the previous function call has now
done it already.  Also, qemuDomainRevertToSnapshot() was setting the
current vm twice, so keep only the one used on the success path.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-22 01:15:20 -05:00
Peter Krempa
971872ca27 conf: Fold private data parsing into virDomainStorageSourceParse
Storage source private data can be parsed along with other components of
private data rather than a separate function which is called from
multiple places.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-20 15:00:17 +01:00
Peter Krempa
7981eadf92 conf: Invert 'skipSeclabels' argument of virDomainDiskSourceFormatInternal
Rename it to 'seclabels' and invert the value.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-20 08:17:05 +01:00
Eric Blake
c555ec2416 conf: Split domain forward typedefs into virconftypes.h
Right now, snapshot_conf.h is rather large - it deals with three
separate types: virDomainSnapshotDef (the snapshot definition as it
maps to XML), virDomainSnapshotObj (an object containing a def and the
relationship to other snapshots), and virDomainSnapshotObjList (a list
of snapshot objects), where two of the three types are currently
public rather than opaque.  What's more, the types are circular: a
snapshot def includes a virDomainPtr, which contains a snapshot list,
which includes a snapshot object, which includes a snapshot def.

In order to split the three objects into separate files, while still
allowing each header to use sane typedefs to incomplete pointers, the
obvious solution is to lift the typedefs into yet another header, with
no other dependencies.  Start the split by factoring out all struct
typedefs from domain_conf.h (enum typedefs don't get used in function
signatures, and function typedefs tend not to suffer from circular
referencing, so those stay put).  The only other exception is
virDomainStateReason, which is only ever used directly rather than via
a pointer.

This patch is just straight code motion (all typedefs are listed in
the same order before and after the patch); a later patch will sort
things for legibility.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2019-03-15 11:29:06 -05:00
Eric Blake
94bbe3da4f domain_conf: Expose virDomainStorageNetworkParseHost
An upcoming patch wants to reuse XML parsing of both unix and tcp
network host descriptions in the context of setting up a backup
NBD server. Make that easier by refactoring the existing parser.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-03-13 20:28:57 -05:00
Jim Fehlig
09eb1ae0ec conf: Add a new 'xenbus' controller type
xenbus is virtual controller (akin to virtio controllers) for Xen
paravirtual devices. Although all Xen VMs have a xenbus, it has
never been modeled in libvirt, or in Xen native VM config format
for that matter.

Recently there have been requests to support Xen's max_grant_frames
setting in libvirt. max_grant_frames is best modeled as an attribute
of xenbus. It describes the maximum IO buffer space (or DMA space)
available in xenbus for use by connected paravirtual devices. This
patch introduces a new xenbus controller type that includes a
maxGrantFrames attribute.

Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-13 12:06:52 -06:00
Michal Privoznik
d947fa8a08 conf: Introduce firmware attribute to <os/>
The idea is that using this attribute users enable libvirt to
automagically select firmware image for their domain. For
instance:

  <os firmware='efi'>
    <type arch='x86_64' machine='pc-q35-4.0'>hvm</type>
    <loader secure='no'/>
  </os>

  <os firmware='bios'>
    <type arch='x86_64' machine='pc-q35-4.0'>hvm</type>
  </os>

(The automagic of selecting firmware image will be described in
later commits.)

Accepted values are 'bios' and 'efi' to let libvirt select
corresponding type of firmware.

I know it is a good sign to introduce xml2xml test case when
changing XML config parser but that will have to come later.
Firmware auto selection is not enabled for any driver just yet so
any xml2xml test would fail right away.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 15:29:44 +01:00
Michal Privoznik
d21f89cc1a conf: Introduce VIR_DOMAIN_LOADER_TYPE_NONE
This is going to extend virDomainLoader enum. The reason is that
once loader path is NULL its type makes no sense. However, since
value of zero corresponds to VIR_DOMAIN_LOADER_TYPE_ROM the
following XML would be produced:

  <os>
    <loader type='rom'/>
    ...
  </os>

To solve this, introduce VIR_DOMAIN_LOADER_TYPE_NONE which would
correspond to value of zero and then use post parse callback to
set the default loader type to 'rom' if needed.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-12 15:29:44 +01:00
Cole Robinson
448a094717 qemu: Support scsi controller model=virtio-{non-}transitional
Add <controller type='scsi' model handling for virtio transitional
devices. Ex:

  <controller type='scsi' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-scsi-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-scsi-non-transitional"

The naming here doesn't match the pre-existing model=virtio-scsi.
The prescence of '-scsi' there seems kind of redundant as we have
type='scsi' already, so I decided to follow the pattern of other
patches and use virtio-transitional etc.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
47f94f4591 qemu: Support virtio-serial controller model=virtio-{non-}transitional
Add controller type='virtio-serial' model handling for virtio
transitional devices. Ex:

  <controller type='virtio-serial' model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-serial-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-serial-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
2593a1bd1a conf: Add <input model='virtio-{non-}transitional'/>
<input> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-input-host-pci-{non-}traditional in qemu, let's add
a standard model= attribute. This just adds the domain_conf
wiring

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
6e64899284 qemu: Support vsock model=virtio-{non-}transitional
Add <vsock> model handling for virtio transitional devices. Ex:

  <vsock model='virtio-transitional'>
    ...
  </vsock>

* "virtio-transitional" maps to qemu "vhost-vsock-pci-transitional"
* "virtio-non-transitional" maps to qemu "vhost-vsock-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
0f5958f5c5 qemu: Support memballoon model=virtio-{non-}transitional
Add new <memballoon> model values for virtio transitional devices. Ex:

  <memballoon model='virtio-transitional'/>

* "virtio-transitional" maps to qemu "virtio-balloon-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-balloon-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
947448e212 conf: Add <filesystem model='virtio-{non-}transitional'/>
<filesystem> devices lack the model= attribute which is used by
most other device types. To eventually support
virtio-9p-pci-{non-}traditional in qemu, let's add a standard
model= attribute. The accepted values are:

- virtio
- virtio-transitional
- virtio-non-transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
e063707556 qemu: Support rng model=virtio-{non-}transitional
Add new <rng> model values for virtio transitional devices. Ex:

  <rng model='virtio-transitional'>
    ...
  </rng>

* "virtio-transitional" maps to qemu "virtio-rng-pci-transitional"
* "virtio-non-transitional" maps to qemu "virtio-rng-pci-non-transitional"

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:41 -05:00
Cole Robinson
ef41ff4219 conf: Add <hostdev model='virtio-{non-}transitional'/>
qemu vhost-scsi devices map to XML roughly like:

    <hostdev mode='subsystem' type='scsi_host'>
      <source protocol='vhost' wwpn=X/>
    </hostdev>

To support vhost-scsi-pci-{non-}traditional in qemu, we
need to to extend the SCSI Host hostdev XML to handle
model= value. This matches the XML model= format used
for mediated devices. This is just the domain_conf bits
and some XML test cases.

Use of virtio-X naming here does not match the hostdev
protocol=vhost nor does it match the qemu vhost-X device
naming, however it's more consistent with all other
model= names in this area, and also matches the
inconsistency of <vsock> devices which use model=virtio
but map to vhost-vsock on the qemu commandline

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Cole Robinson
25d05051b3 conf: Add <disk model='virtio-{non-}transitional'/>
<disk> devices lack the model= attribute which is used by
most other device types. bus= mostly acts as one, but it
serves other purposes too like determing what target=
prefix to use, and for matching against controller type=
values.

Extending bus= to handle additional virtio transitional
devices will complicate apps lives, and it isn't a clean
mapping anyways. So let's bite the bullet and add a new
<disk model=X/> attribute, and wire up common handling
for virtio and virtio-{non-}transitional

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-03-04 11:08:40 -05:00
Marc Hartmayer
d7be1b1c5e qemu: Replace virDomainChrSourceDefFree with virObjectUnref
Replace virDomainChrSourceDefFree with virObjectUnref.

Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-02-25 14:38:30 +01:00
Roman Bogorodskiy
b71de701b8 conf: introduce 'msrs' feature
Introduce the 'msrs' feature element that controls Model Specific
Registers related behaviour. At this moment it allows only
single tunable attribute "unknown":

 <msrs unknown='ignore|fault'/>

Which tells hypervisor to ignore accesses to unimplemented
Model Specific Registers. The only user of that for now is going
to be the bhyve driver.

Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-02-24 12:33:42 +04:00
Eric Blake
27c8fd7490 domain: Fix unknown flags diagnosis in virDomainGetXMLDesc
Many drivers had a comment that they did not validate the incoming
'flags' to virDomainGetXMLDesc() because they were relying on
virDomainDefFormat() to do it instead. This used to be the case
(at least since 461e0f1a and friends in 0.9.4 added unknown flag
checking in general), but regressed in commit 0ecd6851 (1.2.12),
when all of the drivers were changed to pass 'flags' through the
new helper virDomainDefFormatConvertXMLFlags(). Since this helper
silently ignores unknown flags, we need to implement flag checking
in each driver instead.

Annoyingly, this means that any new flag values added will silently
be ignored when targeting an older libvirt, rather than our usual
practice of loudly diagnosing an unsupported flag.  Add comments
in domain_conf.[ch] to remind us to be extra vigilant about the
impact when adding flags (a new flag to add data is safe if the
older server omitting the requested data doesn't break things in
the newer client; a new flag to suppress data rather than enhancing
the existing VIR_DOMAIN_XML_SECURE may form a data leak or even a
security hole).

In the qemu driver, there are multiple callers all funnelling to
qemuDomainDefFormatBufInternal(); many of them already validated
flags (and often only a subset of the full set of possible flags),
but for ease of maintenance, we can also check flags at the common
helper function.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-02-19 16:52:51 -06:00
Cole Robinson
7662194bf3 Require a semicolon to VIR_ENUM_DECL calls
Missing semicolon at the end of macros can confuse some analyzers
(like cppcheck <filename>), and we have a mix of semicolon and
non-semicolon usage through the code. Let's standardize on using
a semicolon for VIR_ENUM_DECL calls.

Drop the semicolon from the final statement of the macro, so
the compiler will require callers to add a semicolon.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-02-03 17:46:29 -05:00
Cole Robinson
4a4c418110 conf: Add virDomainDeviceSetData
This is essentially a wrapper for easily setting the variable
name in virDomainDeviceDef that matches its associated
VIR_DOMAIN_DEVICE_TYPE.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-24 18:59:38 -05:00
Cole Robinson
ea72bc65df conf: Add virDomainNetIsVirtioModel
This will be extended in the future, so let's simplify things by
centralizing the checks.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2019-01-24 18:59:38 -05:00
Ján Tomko
b7a02c35af conf: add privateData to virDomainGraphicsDef
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-22 12:18:28 +01:00
Ján Tomko
c2b7a5f23d conf: introduce virDomainGraphicsNew
A helper function for allocating the virDomainGraphicsDef structure.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-22 12:18:28 +01:00
Luyao Zhong
db521e7d03 conf: Introduce 'readonly' element into xml for NVDIMM memory
The 'readonly' option allows users to mark vNVDIMM read-only:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
          <readonly/>
      </target>
  </memory>
  ...
</devices>

Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-02 09:00:34 -05:00
Luyao Zhong
73fc8c491e conf: Introduce 'pmem' element into xml for NVDIMM memory
The 'pmem' option allows users to specify whether the backend
storage of memory-backend-file is a real persistent memory:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
          <pmem/>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
      </target>
  </memory>
  ...
</devices>

Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-02 09:00:29 -05:00
Luyao Zhong
80d1ed9773 conf: Introduce 'alignsize' element into xml for NVDIMM memory
NVDIMM emulation will mmap the backend file, it uses host pagesize
as the alignment of mapping address before, but some backends may
require alignments different from the pagesize. So the 'alignsize'
option is introduced to allow specification of the proper alignment:

<devices>
  ...
  <memory model='nvdimm' access='shared'>
      <source>
          <path>/dev/dax0.0</path>
          <alignsize unit='MiB'>2</alignsize>
      </source>
      <target>
          <size unit='MiB'>4094</size>
          <node>0</node>
          <label>
              <size unit='MiB'>2</size>
          </label>
      </target>
  </memory>
  ...
</devices>

Signed-off-by: Luyao Zhong <luyao.zhong@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2019-01-02 09:00:24 -05:00
Daniel P. Berrangé
568a417224 Enforce a standard header file guard symbol name
Require that all headers are guarded by a symbol named

  LIBVIRT_$FILENAME

where $FILENAME is the uppercased filename, with all characters
outside a-z changed into '_'.

Note we do not use a leading __ because that is technically a
namespace reserved for the toolchain.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-14 10:47:13 +00:00
Daniel P. Berrangé
600462834f Remove all Author(s): lines from source file headers
In many files there are header comments that contain an Author:
statement, supposedly reflecting who originally wrote the code.
In a large collaborative project like libvirt, any non-trivial
file will have been modified by a large number of different
contributors. IOW, the Author: comments are quickly out of date,
omitting people who have made significant contribitions.

In some places Author: lines have been added despite the person
merely being responsible for creating the file by moving existing
code out of another file. IOW, the Author: lines give an incorrect
record of authorship.

With this all in mind, the comments are useless as a means to identify
who to talk to about code in a particular file. Contributors will always
be better off using 'git log' and 'git blame' if they need to  find the
author of a particular bit of code.

This commit thus deletes all Author: comments from the source and adds
a rule to prevent them reappearing.

The Copyright headers are similarly misleading and inaccurate, however,
we cannot delete these as they have legal meaning, despite being largely
inaccurate. In addition only the copyright holder is permitted to change
their respective copyright statement.

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-13 16:08:38 +00:00
Erik Skultety
0a75de2219 conf: gfx: Add egl-headless as a member to virDomainGraphicsDef struct
Since we need to specify the rendernode option onto QEMU cmdline, we
need this union member to retain consistency in how we build the
cmdline.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Erik Skultety
255e073263 conf: Introduce virDomainGraphics-related helpers
A few simple helpers that allow us to determine whether a graphics can
and will need to make use of a DRM render node.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-12-03 14:56:08 +01:00
Andrea Bolognani
bfa2bd7e38 conf: Parse and format nested-hv feature
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2018-11-27 17:12:19 +01:00
Marek Marczykowski-Górecki
aca7ff5f70 libxl: add support for PVH
Since this is something between PV and HVM, it makes sense to put the
setting in place where domain type is specified.
To enable it, use <os><type machine="xenpvh">xenpvh</type></os>. It is
also included in capabilities.xml, for every supported HVM guest type - it
doesn't seems to be any other requirement (besides new enough Xen).

Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
2018-11-26 16:31:21 -07:00
Marc-André Lureau
24b74d187c qemu: add memfd source type
Add a new memoryBacking source type "memfd", supported by QEMU (when
the capability is available).

A memfd is a specialized anonymous memory kind. As such, an anonymous
source type could be automatically using a memfd. However, there are
some complications when migrating from different memory backends in
qemu (mainly due to the internal object naming at this point, but
there could be more). For now, it is simpler and safer to simply
introduce a new source type "memfd". Eventually, the "anonymous" type
could learn to use memfd transparently in a separate change.

The main benefits are that it doesn't need to create filesystem files,
and it also enforces sealing, providing a bit more safety.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-11-16 08:57:12 +01:00
Vitaly Kuznetsov
c3d0d7cc8a conf: add support for Hyper-V Enlightened VMCS
Support Hyper-V Enlightened VMCS in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_EVMCS
cases to src/qemu/* for now.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
2018-11-15 09:54:57 +01:00
Vitaly Kuznetsov
988113f4fa conf: add support for Hyper-V PV IPIs
Support Hyper-V PV IPI enlightenment in domain config. QEMU support will
be implemented in the next patch, adding interim VIR_DOMAIN_HYPERV_IPI
cases to src/qemu/* for now.

Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
2018-11-15 09:54:52 +01:00
Wang Huaqiang
a5c4e705a5 conf: Introduce cache monitor element in cachetune
Introducing <monitor> element under <cachetune> to represent
a cache monitor.

Signed-off-by: Wang Huaqiang <huaqiang.wang@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-11-14 12:18:46 -05:00
Ján Tomko
df6dc485bb conf: fix args naming of virDomainChrSourceDefCopy
Since its introduction in commit 2e37bf42 the naming of the arguments
between the prototype and the definition does not match.

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2018-09-07 16:39:15 +02:00
Andrea Bolognani
ab3f781a10 conf: Move virDomainDeviceAddressIsValid() to device_conf
The function is called on a virDomainDeviceInfo, so it
should be declared along with it.

Moving this function requires moving and making public
virDomainDeviceCCWAddressIsValid() as well, but that's
perfectly fine since the same reasoning above also
applies to it, due to virDomainDeviceCCWAddress being
(correctly) declared in device_conf.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-09-04 10:54:32 +02:00
Andrea Bolognani
edeef77958 conf: Move virDomainDeviceAddressType to device_conf
It's used in virDomainDeviceInfo, which makes
domain_conf the wrong place to declare it.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-09-04 10:54:32 +02:00
Andrea Bolognani
9610eaa48d qemu: Introduce 16550A serial console model
None of the existing models is suitable for use with
RISC-V virt guests, and we don't want information about
the serial console to be missing from the XML.

The name is based on comments in qemu/hw/riscv/virt.c:

  RISC-V machine with 16550a UART and VirtIO MMIO

and in qemu/hw/char/serial.c:

  QEMU 16550A UART emulation

along with the output of dmesg in the guest:

  Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 13,
    base_baud= 230400) is a 16550A

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-28 17:57:38 +02:00
Peter Krempa
a6ea791e25 conf: Implement private data formatting and parsing for disks
Allow storing of private data in the status XML for disks.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-08-21 15:46:06 +02:00
Vitaly Kuznetsov
f4c39db736 conf: qemu: add support for Hyper-V PV TLB flush
Qemu-3.0 supports Hyper-V-style PV TLB flush, Windows guests can benefit
from this feature as KVM knows which vCPUs are not currently scheduled (and
thus don't require any immediate action).

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-08-16 12:50:18 -04:00
Vitaly Kuznetsov
b5d770e155 conf: qemu: add support for Hyper-V reenlightenment notifications
Qemu-3.0 supports so-called 'Reenlightenment' notifications and this (in
conjunction with 'hv-frequencies') can be used make Hyper-V on KVM pass
stable TSC page clocksource to L2 guests.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-08-16 12:46:49 -04:00
Vitaly Kuznetsov
8253bca961 conf: qemu: add support for Hyper-V frequency MSRs
Qemu-2.12 gained 'hv-frequencies' cpu flag to enable Hyper-V frequency
MSRs. These MSRs are required (but not sufficient) to make Hyper-V on
KVM pass stable TSC page clocksource to L2 guests.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-08-16 12:45:55 -04:00
Bing Niu
acc288d655 conf: Rename cachetune to resctrl
Resctrl not only supports cache tuning, but also memory bandwidth
tuning. Renaming cachetune to resctrl to reflect that. With resctrl,
all allocation for different resources (cache, memory bandwidth) are
aggregated and represented by a virResctrlAllocPtr inside
virDomainResctrlDef.

Signed-off-by: Bing Niu <bing.niu@intel.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-08-13 14:19:41 -04:00
Daniel P. Berrangé
9e66ecb5ea conf: don't use virDomainVirtType in struct field
Use of enum types for struct fields is generally avoided since it causes
warnings if the compiler assumes the enum is unsigned. For example

  commit 8e2982b576
  Author: Cole Robinson <crobinso@redhat.com>
  Date:   Tue Jul 24 16:27:54 2018 -0400

    conf: Clean up virDomainDefParseCaps

Introduced a line:

  if ((def->virtType = virDomainVirtTypeFromString(virttype)) < 0) {

which causes a build failure with CLang

  conf/domain_conf.c:19143:65: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]

as the compiler is free to optimize away the "< 0" check due to the
assumption that the enum type is unsigned and always in range.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-26 15:50:31 +01:00
Cole Robinson
8c496a1d00 conf: Replace SKIP_OSTYPE_CHECKS with SKIP_VALIDATE
SKIP_OSTYPE_CHECKS only hides some error reporting at this point,
so it can be foled into SKIP_VALIDATE

Acked-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2018-07-26 10:13:00 -04:00
Erik Skultety
d48813e81a conf: Introduce new video type 'none'
Historically, we've always enabled an emulated video device every time we
see that graphics should be supported with a guest. With the appearance
of mediated devices which can support QEMU's vfio-display capability,
users might want to use such a device as the only video device.
Therefore introduce a new, effectively a 'disable', type for video
device.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-07-18 18:23:51 +02:00
Erik Skultety
d54e45b6ed conf: Introduce new <hostdev> attribute 'display'
QEMU 2.12 introduced a new type of display for mediated devices using
vfio-pci backend which allows a mediated device to be used as a VGA
compatible device as an alternative to an emulated video device. QEMU
exposes this feature via a vfio device property 'display' with supported
values 'on/off/auto' (libvirt will default to 'off').

This patch adds the necessary bits to domain config handling in order to
expose this feature. Since there's no convenient way for libvirt to come
up with usable defaults for the display setting, simply because libvirt
is not able to figure out which of the display implementations - dma-buf
which requires OpenGL support vs vfio regions which doesn't need OpenGL
(works with OpenGL enabled too) - the underlying mdev uses.

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-07-18 18:16:08 +02:00
Erik Skultety
425329181f conf: Introduce virDomainGraphicsDefHasOpenGL helper
A simple helper which will loop through all the graphics elements and
checks whether at least one of them enables OpenGL support, either by
containing <gl enable='yes'/> or being of type 'egl-headless'.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Acked-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
2018-07-18 18:16:08 +02:00
Erik Skultety
d8266ebe16 qemu: Introduce a new graphics display type 'headless'
Since 2.10 QEMU supports a new display type egl-headless which uses the
drm nodes for OpenGL rendering copying back the rendered bits back to
QEMU into a dma-buf which can be accessed by standard "display" apps
like VNC or SPICE. Although this display type can be used on its own,
for any practical use case it makes sense to pair it with either VNC or
SPICE display. The clear benefit of this display is that VNC gains
OpenGL support, which it natively doesn't have, and SPICE gains remote
OpenGL support (native OpenGL support only works locally through a UNIX
socket, i.e. listen type=socket/none).

Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
2018-07-18 18:16:07 +02:00
Erik Skultety
767f9e1449 qemu: validate: Enforce compile time switch type checking for videos
There wasn't an explicit type case to the video type enum in
qemuDomainDeviceDefValidateVideo, _TYPE_GOP was also missing from the
switch.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-07-09 18:59:24 +02:00
Erik Skultety
f317b1e5c5 conf: Introduce virDomainVideoDefClear helper
Future patches rely on the ability to reset the contents of the
virDomainVideoDef structure rather than re-allocating it.

Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-07-09 18:59:02 +02:00
Andrea Bolognani
9f3b9100f3 conf: Parse and format the HTM pSeries feature
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-07-03 09:46:59 +02:00
Michal Privoznik
4ad54a417a conf: Forbid device alias change on device-update
https://bugzilla.redhat.com/show_bug.cgi?id=1585108

When updating a live device users might pass different alias than
the one the device has. Currently, this is silently ignored which
goes against our behaviour for other parts of the device where we
explicitly allow only certain changes and error out loudly on
anything else.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-27 16:43:09 +02:00
Michal Privoznik
5e9b150fe0 conf: Reintroduce action to virDomainDefCompatibleDevice
This was lost in c57f3fd2f8. But now we are going to
need it again (except the DETACH action where checking for device
compatibility does not make much sense anyway).

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
2018-06-27 16:42:27 +02:00
Andrea Bolognani
0ee6f885e0 conf: Parse and format HPT maxpagesize
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2018-06-26 10:15:52 +02:00
Andrea Bolognani
c2fef631ba conf: Reintroduce virDomainDef::hpt_resizing
We're going to introduce a second HPT-related setting soon,
at which point using a single location to store everything is
no longer going to cut it.

This mostly, but not completely, reverts 3dd1eb3b26.

Signed-off-by: Andrea Bolognani <abologna@redhat.com>
2018-06-26 10:15:47 +02:00
Cole Robinson
9bda139537 conf: Remove unused virDomainDefNewFull
The last usages were removed with the xend driver in 1dac5fbbbb

Reviewed-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
2018-06-20 14:00:13 -04:00