https://bugzilla.redhat.com/show_bug.cgi?id=1515533
We're already checking if IPv4 prefix isn't too long. But we are
not checking if it isn't too short. QEMU supports prefixes longer
than 4 (including). I haven't find anything similar related to
IPv6 in qemu sources.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The array indexes are formatted if the JSON->commandline translator is
translating an array type. It does not at all depend on this function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Instead of storing separately whether the feature is enabled
or not and what resizing policy should be used, store both of
them in a single place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Instead of storing separately whether the feature is enabled
or not and what driver should be used, store both of them in
a single place.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
When no GIC version is specified, we currently default to GIC v2;
however, that's not a great default, since guests will fail to
start if the hardware only supports GIC v3.
Change the behavior so that a sensible default is chosen instead.
That basically means using the same algorithm whether the user
didn't explicitly enable the GIC feature or they explicitly
enabled it but didn't specify any GIC version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Keep them along with other arch/machine type checks for
features instead of waiting until command line generation
time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The compiler can make sure we are handling all features.
While reworking the logic, also change error messages to a more
consistent style.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We want to perform all feature verification in a single spot, but
some of it (eg. GIC) is currently being performed at command line
generation time, and moving it to PostParse() would cause guests
to disappear. Moving verification to Validate() allows us to
side-step the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This reverts commit 038eb472a0.
On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Commit 'f0f2a5ec2' neglected to adjust the if condition to split
out the possibility that the @watchdog is NULL when altering the
message to add detail about the model.
Just split out the condition and use previous/original message, but
with the new message code.
Found by Coverity
Signed-off-by: John Ferlan <jferlan@redhat.com>
The floppy command formatting is special-cased since it does not
directly translate to a single '-device' argument.
Move the code from qemuBuildDiskDriveCommandLine to a new helper
function so that all the related code is together.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We forgot to free alloced mem when failed to
dup ifname or macaddr.
Also use VIR_STEAL_PTR to simplify codes.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Several PCI controllers have the same options, and thus
can be handled together.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
This is a hard error, and should be handled as such.
Introduced in 2461476022.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Loadable drivers must never depend on each other. Over time some usage
mistakenly crept in for the storage and network drivers, but now this is
eliminated the syntax-check rules can enforce this separation once more.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify resolve the atual type of NICs with type=network. It
has todo this before it has allocated the actual NIC. This introduces
a callback system to allow us to decouple the QEMU driver from the
network driver.
This is a short term step, as it ought to be possible to achieve the
same end goal by simply querying XML via the public network API. The
QEMU code in question though, has no virConnectPtr conveniently
available at this time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver calls into the network driver to get the first IP
address of the network. This information is readily available via the
formal public API by fetching the XML doc and then parsing it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently the QEMU driver will call directly into the network driver
impl to modify network device bandwidth for interfaces with
type=network. This introduces a callback system to allow us to decouple
the QEMU driver from the network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Refreshing the halted state can cause VM performance issues. Since
s390 is currently the only architecture with a known interest in
the halted state, we're avoiding to call QEMU on other platforms.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Since it may be possible that the state is unknown in some cases we
should store it as a tristate so that other code using it can determine
whether the state was updated.
Don't extract the halted state into a separate array, but rater access
the vcpu structures directly. We still need to call the vcpu helper to
retrieve the performance statistics though.
https://bugzilla.redhat.com/show_bug.cgi?id=916061
If the QEMU version running is new enough (based on the DUMP_COMPLETED
event), then we can add a 'detach' boolean to the dump-guest-memory
command in order to tell QEMU to run in a thread. This ensures that we
don't lock out other commands while the potentially long running dump
memory is completed.
This allows the usage of a qemuDumpWaitForCompletion which will wait
for the event while the qemuDomainGetJobInfoDumpStats can be used via
qemuDomainGetJobInfo in order to query QEMU to determine how far along
the job is.
Now that we have a true async job, we'll only set the dump_memory_only
flag only when @detach=false; otherwise, we note that the job is a
for stats dump this allows the opposite end for job info to determine
what to copy.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add an API to allow fetching the memory only dump statistics
for a job via the qemuDomainGetJobInfo API.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add the query-dump API's in order to allow the dump-guest-memory
to be used to monitor progress. This will use the dump stats
extraction helper to fill a return buffer.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Handle a DUMP_COMPLETED event processing the status, stats, and
error string. Use the @status in order to copy the error that
was generated whilst processing the @stats data. If an error was
provided by QEMU, then use that instead.
If there's no async job, we can just ignore the data.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The event will be fired when the domain memory only dump completes.
Fill in a return buffer to store/pass along the dump statistics that
will be eventually shared by a query-dump command. Also pass along
the status of the filling and any possible error received.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Define the qemuMonitorDumpStats as a new job JobStatsType to handle
being able to get memory dump statistics. For now do nothing with
the new TYPE_MEMDUMP.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Add a TYPE_SAVEDUMP so that when coalescing stats for a save or
dump we don't needlessly try to get the mirror stats for a migration.
Other conditions can still use MIGRATION and SAVEDUMP interchangably
including usage of the @migStats field to fetch/store the data.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Convert the stats field in _qemuDomainJobInfo to be a union. This
will allow for the collection of various different types of stats
in the same field.
When starting the async job that will end up being used for stats,
set the @statsType value appropriately. The @mirrorStats are
special and are used with stats.mig in order to generate the
returned job stats for a migration.
Using the NONE should avoid the possibility that some random
async job would try to return stats for migration even though
a migration is not in progress.
For now a migration and a save job will use the same statsType
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Since one of the things in capabilities (info from resctrl updated with data
about caches) can be change on the system by remounting the /sys/fs/resctrl with
different options, the capabilities need to be refreshed. There is a better fix
in the works, but it's going to be way bigger than this (hence the XXX note
there), so for the time being let's workaround this. And in order not to slow
down the domain starting, only get the capabilities if there are any cachetunes.
Relates-to: https://bugzilla.redhat.com/show_bug.cgi?id=1540780
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add and use qemuProcessEventFree for freeing qemuProcessEvents. This
is less error-prone as the compiler can help us make sure that for
every new enumeration value of qemuProcessEventType the
qemuProcessEventFree function has to be adapted.
All process*Event functions are *only* called by
qemuProcessHandleEvent and this function does the freeing by itself
with qemuProcessEventFree. This means that an explicit freeing of
processEvent->data is no longer required in each process*Event
handler.
The effectiveness of this change is also demonstrated by the fact that
it fixes a memory leak of the panic info data in
qemuProcessHandleGuestPanic.
Reported-by: Wang Dong <dongdwdw@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Use the return value of virObjectRef directly. This way, it's easier
for another reader to identify the reason why the additional reference
is required.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the DUMP_COMPLETED check to the capabilities. This is the
mechanism used to determine whether the dump-guest-memory command
can support the "-detach" option and thus be able to wait on the
event and allow for a query of the progress of the dump.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Extract out the parts of qemuDomainGetJobStatsInternal that get
the migration stats. We're about to add the ability to get just
dump information.
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Use a switch statement instead of if-else-if statements. Move the
command line building of the iothread attribute into the common path
as the SCSI controller attributes are already validated.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Move the SATA controller check from command line building to
controller def validation. This includes copying the SATA
skip check found in qemuBuildSkipController.
Move the qemuCaps checks over to qemuDomainControllerDefValidatePCI.
This requires two test updates in order to set the correct capability
bit for an xml2xml test as well as setting up the similar capability
for the pseries memlocktest.
Excluding the qemuCaps checks, move the remainder of the checks
that validate whether the PCI definition is valid or not into
qemuDomainControllerDefValidatePCI.
Similar to the checking the modelName vs. NAME_NONE, let's make the
ModelNameTypeToString check more generic too within the checking done
in controller validation (with the same ignore certain models.
NB: We need to keep the ModelNameTypeToString fetch in command line
validation since we use it, but at least we can assume it returns
something valid now.
Move the various modelName == NAME_NONE from the command line
generation into domain controller validation. Also rather than
have multiple cases with the same check, let's make the code
more generic, but also note that it was the modelName option
that caused the failure. We also have to be sure not to check
the PCI models that we don't care about.
For the remaining checks in command line building, we can use
the field name in the error message to be more specific about
what causes the failure.
