Even though it's auto-generated it's based on qemu.conf option and listen type
address already uses "fromConfig" to carry this information. Following commits
will convert the socket to listen element so this rename is required because
there will be also an option to get socket auto-generated independently on the
qemu.conf option.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Since it will not be called from outside of conf we can unexport it too
if we move it to the appropriate place.
Test suite change is necessary since the error will be reported sooner
now.
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Calling virDomainObjSetDefTransient with live=false is a no-op
on an inactive domain.
Only call it on an active domain, since this is the only place using
the live bool.
There's this problem on the recent gcc-6.1:
In file included from conf/domain_conf.c:37:0:
conf/domain_conf.c: In function 'virDomainChrPreAlloc':
conf/domain_conf.c:14109:35: error: potential null pointer dereference [-Werror=null-dereference]
return VIR_REALLOC_N(*arrPtr, *cntPtr + 1);
^~
./util/viralloc.h:158:73: note: in definition of macro 'VIR_REALLOC_N'
# define VIR_REALLOC_N(ptr, count) virReallocN(&(ptr), sizeof(*(ptr)), (count), \
^~~~~
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:14133:21: error: potential null pointer dereference [-Werror=null-dereference]
for (i = 0; i < *cntPtr; i++) {
^~~~~~~
GCC basically fails to see, that the
virDomainChrGetDomainPtrsInternal will never actually return NULL
because it's never called over a domain char device with _LAST
type. But to make it shut up, lets turn this function into
returning an integer and check in the callers if a zero value
value was returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Okay, I admit that our code here is complex. It's not easy to
spot that NULL deref can't really happen here. So it's no wonder
that a dumb compiler fails to see all the connections and
produces the following errors:
CC conf/libvirt_conf_la-domain_conf.lo
conf/domain_conf.c: In function 'virDomainDefFormatInternal':
conf/domain_conf.c:22162:22: error: potential null pointer dereference [-Werror=null-dereference]
if (sched->policy == i)
~~~~~^~~~~~~~
<snip/>
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.
The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.
With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-switch-upstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
...
These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
Make virDomainControllerFindUnusedIndex() a global function so that it
can be used outside domain_conf.c (as well as higher up in
domain_conf.c itself)/ Also make its DomainDef arg a const* so that
functions which only have a const* to the domain can use it.
Add a new element to <domain> XML:
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
To supply a path to a SLIC (Software Licensing) ACPI
table blob.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
Prior to this, <address type='pci'/> wasn't allowed when parsing
(domain+bus+slot+function needed to be a "valid" PCI address, meaning
that at least one of domain/bus/slot had to be non-0), the RNG
required bus to be specified, and if type was set to PCI when
formatting, domain+bus+slot+function would always be output.
This makes all the address attributes optional during parse and RNG
validation, and suppresses domain+bus+slot+function if domain+bus+slot
are all 0 (NB: if d+b+s are all 0, any value for function is
nonsensical as that will never happen in the real world, and after
the next patch we will always assign a real working address to any
empty PCI address before it is ever output to anywhere).
Note that explicitly setting all attributes to 0 is equivalent to
setting none of them, which is okay, since 0000:00:00 is reserved in
any PCI bus setup, and can't be used anyway.
Move code that decide whether we print the 'listen' attribute or not
into virDomainGraphicsListenDefFormatAddr() function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Name the validation function distinctively since it's called in the
parser. Later patches will add function that will validate disk
definitions that are invalid but need to be parsed to avoid losing
domains.
We support omitting listen attribute of graphics element so we should
also support omitting address attribute of listen element. This patch
also updates libvirt to always add a listen element into domain XML
except for VNC graphics if socket attribute is specified.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move the compatibility code out of virDomainGraphicsListensParseXML()
into virDomainGraphicsListenDefParseXML(). This also fixes a small
inconsistency between the code and error message itself.
Before this patch we would search first listen element that is
type='address' to validate listen and address attributes. After this
patch we always take the first listen element regardless of the type.
This shouldn't break anything since all drivers supports only one
listen.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If socket attribute is present we start VNC that listens only on that
unix socket. This makes the parser behave the same way as we actually
use the socket attribute.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Commit 82ba41108a made possible to use direct mapped iSCSI
volumes in qemu as disk sources but didn't remove the define time check.
Rework the check by simplifying the condition and allow any volumes to
be used with disk type='lun'.
Move filling out the default video (v)ram to DeviceDefPostParse.
This means it can be removed from virDomainVideoDefParseXML
and qemuParseCommandLine. Also, we no longer need to special case
VIR_DOMAIN_VIRT_XEN, since the per-driver callback gets called
before the generic one.
Commit 6879be48 moved adding of an implicit video device after XML
parsing. As a result, libxlDomainDeviceDefPostParse() is no longer
called to set the default vram when adding an implicit device.
Commit 6879be48 assumes virDomainVideoDefaultRAM() will set the
default vram, but it returns 0 if the domain virtType is
VIR_DOMAIN_VIRT_XEN. Attempting to start an HVM domain with vram=0
results in
error: unsupported configuration: videoram must be at least 4MB for CIRRUS
The default vram setting for Xen HVM domains depends on the device
model used (qemu-xen vs qemu-traditional), hence setting the
default is deferred to libxlDomainDeviceDefPostParse().
Call the device post-parse callback even for implicit video,
to fill out the default vram even for VIR_DOMAIN_VIRT_XEN.
https://bugzilla.redhat.com/show_bug.cgi?id=1334557
Most-of-commit-message-by: Jim Fehlig <jfehlig@suse.com>
Commin 36785c7e refactored the code for input devices but introduced a
bug where we removed all keyboard from migratable XML. We have to
remove only implicit keyboards like PS2 or XEN.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Add the ability to add an 'iothread' to the controller which will be how
virtio-scsi-pci and virtio-scsi-ccw iothreads have been implemented in qemu.
Describe the new functionality and add tests to parse/validate that the
new attribute can be added.
This adds a ports= attribute to usb controller XML, like
<controller type='usb' model='nec-xhci' ports='8'/>
This maps to:
qemu -device nec-usb-xhci,p2=8,p3=8
Meaning, 8 ports that support both usb2 and usb3 devices. Gerd
suggested to just expose them as one knob.
https://bugzilla.redhat.com/show_bug.cgi?id=1271408
If a panic device is being defined without a model in a domain
the default value is always overwritten with model ISA. An ISA
bus does not exist on S390 and therefore specifying a panic device
results in an unsupported configuration.
Since the S390 architecture inherently provides a crash detection
capability the panic device should be defined in the domain xml.
This patch adds an s390 panic device model and prevents setting a
device address on it.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We historically format runtime seclabel selinux/apparmor values,
however we skip formatting runtime DAC values. This was added in
commit 990e46c454
Author: Marcelo Cerri <mhcerri@linux.vnet.ibm.com>
Date: Fri Aug 31 13:40:41 2012 +0200
conf: Avoid formatting auto-generated DAC labels
to maintain migration compatibility with libvirt < 0.10.0.
However the formatting was skipped unconditionally. Instead only
skip formatting in the VIR_DOMAIN_DEF_FORMAT_MIGRATABLE case.
https://bugzilla.redhat.com/show_bug.cgi?id=1215833
Trying to define a domain name containing an embedded '/'
will immediately fail when trying to write the XML to disk for
our stateful drivers. This patch explicitly rejects names
containing a '/', and provides an xmlopt feature for drivers
to avoid this validation check, which is enabled in every
non-stateful driver that already has xmlopt handling wired up.
(Technically this could reject a previously accepted vmname like
'/foo', however at least for the qemu driver that falls over
later when starting qemu)
https://bugzilla.redhat.com/show_bug.cgi?id=639923
We had both and the only difference was that the latter also included
information about multifunction setting. The problem with that was that
we couldn't use functions made for only one of the structs (e.g.
parsing). To consolidate those two structs, use the one in virpci.h,
include that in domain_conf.h and add the multifunction member in it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Modeled after the qemuDomainDiskPrivatePtr logic, create a privateData
pointer in the _virDomainHostdevDef to allow storage of private data
for a hypervisor in order to at least temporarily store auth/secrets
data for usage during qemuBuildCommandLine.
NB: Since the qemu_parse_command (qemuParseCommandLine) code is not
expecting to restore the auth/secret data, there's no need to add
code to handle this new structure there.
Updated copyrights for modules touched. Some didn't have updates in a
couple years even though changes have been made.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This reverts commit 690969af9c, which
added the domain config parts to support a "peer" attribute in domain
interface <ip> elements.
It's being removed temporarily for the release of libvirt 1.3.4
because the feature doesn't work, and there are concerns that it may
need to be modified in an externally visible manner which could create
backward compatibility problems.
Similarly to what commit 7140807917 did with some internal paths,
clear vnc socket paths that were generated by us. Having such path in
the definition can cause trouble when restoring the domain. The path is
generated to the per-domain directory that contains the domain ID.
However, that ID will be different upon restoration, so qemu won't be
able to create that socket because the directory will not be prepared.
To be able to migrate to older libvirt, skip formatting the socket path
in migratable XML if it was autogenerated. And mark it as autogenerated
if it already exists and we're parsing live XML.
Best viewed with '-C'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1326270
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add virDomainObjGetShortName() and use it. For now that's used in one
place, but we should expose it so that future patches can use it.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Currently we only allow /dev/random and /dev/hwrng as host input
for <rng><backend model='random'/> device. This was added after
various upstream discussions in commit 4932ef45
However this restriction has generated quite a few complaints over
the years, so a new discussion was initiated:
http://www.redhat.com/archives/libvir-list/2016-April/msg00987.html
Several people suggested removing the restriction, and nobody really
spoke up to defend it. So this patch drops the path restriction
entirely
https://bugzilla.redhat.com/show_bug.cgi?id=1074464
