The correct key for dependencies for virt_modules hash is `deps`.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
g_regex_unref reports an error if called with a NULL argument.
We have two cases in the code where we (possibly) call it on a NULL
argument. The interesting one is in virDomainQemuMonitorEventCleanup.
Based on VIR_CONNECT_DOMAIN_QEMU_MONITOR_EVENT_REGISTER_REGEX, we unref
data->regex, which has two problems:
* On the client side, flags is -1 so the comparison is true even if no
regex was used, reproducible by:
$ virsh qemu-monitor-event --timeout 1
which results in an ugly error:
(process:1289846): GLib-CRITICAL **: 14:58:42.631: g_regex_unref: assertion 'regex != NULL' failed
* On the server side, we only create the regex if both the flag and the
string are present, so it's possible to trigger this message by:
$ virsh qemu-monitor-event --regex --timeout 1
Use a non-NULL comparison instead of the flag to decide whether we need
to unref the regex. And add a non-NULL check to the unref in the
VirtualBox test too.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 71efb59a4dhttps://bugzilla.redhat.com/show_bug.cgi?id=1876907
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Even though this was brought up in upstream discussion [1] it
missed my patches: users should prefer <oemStrings/> over fwcfg.
The reason is that fwcfg is considered somewhat internal to QEMU
and it has limited number of slots and neither of these applies
to <oemStrings/>.
While I'm at it, I'm fixing the example too (because it contains
incorrect element name) and clarifying sysfs/ exposure.
1: https://www.redhat.com/archives/libvir-list/2020-May/msg00957.html
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The 'readline' package only contains the library, which rpm is
already generating the (stricter) correct dependency for.
Signed-off-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When starting a domain with <numatune/> set libvirt translates
given NUMA nodes into a set of host CPUs which is then used to
QEMU process affinity. But, if the numatune contains a
non-existent NUMA node then the translation fails with no error
reported. This is because virNumaNodesetToCPUset() calls
virNumaGetNodeCPUs() and expects it to report an error on
failure. Well, it does except for non-existent NUMA nodes. While
this behaviour might look strange it is actually desired because
of how we construct host capabilities. The virNumaGetNodeCPUs()
is called from virCapabilitiesHostNUMAInitReal() where we do not
want any error reported for non-existent NUMA nodes.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1724866
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
A wireshark plugin must declare what major and minor version it
was built with as these are checked when wireshark loads plugins.
On the top of that, we use major + minor + micro to adapt to
changed API between releases. So far, we were getting these
version numbers from wireshark/config.h.
And while most distributions install wireshark/config.h file some
don't. On distros shipping it it's hack^Wsaved during built by
packaging system and installed later. But some distros are not
doing that. At least not for new enough wireshark because as of
wireshark's commit v2.9.0~1273 the ws_version.h is installed
which contains the version macros we need and is installed by
wireshark itself.
But of course, some distros which have new enough wireshark
packaged do not ship ws_version.h and stick to the hack. That is
why we can't simply bump the minimal version and switch to the
new header file. We need a configure check and adopt our code to
deal with both ways. At least for the time being.
Based on Andrea's original patch:
https://www.redhat.com/archives/libvir-list/2020-September/msg00156.html
Closes: https://gitlab.com/libvirt/libvirt/-/issues/74
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When starting a domain, qemuProcessLaunch() iterates over all
VIR_PERF_EVENT_* values and (possibly) enables them. While there
is nothing wrong with the code, the for loop where it's done makes
it harder to jump onto next block of code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Propagate the cluster size from the original image as the user might
have configured a custom cluster size for performance reasons. Propagate
the cluster size of a qcow2 image to the new overlay or copy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
'blockdev-create' allows us to create the image with a custom cluster
size if we wish to. Wire it up for 'qcow2'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Configuring the cluster size of an image may have performance
implications. This patch allows us to detect cluster size for existing
images so that we will be able to propagate it to new images which are
based on existing images e.g. during snapshots/block-copy/etc.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Incremental backups are not enabled. There's no point documenting
individual patches implementing an incomplete feature.
This reverts commit e6285f84fa
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
When building and populating domain NS a couple of functions are
called that append paths to a string list. This string list is
then inspected, one item at the time by
qemuNamespacePrepareOneItem() which gathers all the info for
given path (stat buffer, possible link target, ACLs, SELinux
label) using qemuNamespaceMknodItemInit(). If the path needs to
be created in the domain's private /dev then it's added onto this
qemuNamespaceMknodData list which is freed later in the process.
But, if the path does not need to be created in the domain's
private /dev, then the memory allocated by
qemuNamespaceMknodItemInit() is not freed anywhere leading to a
leak.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is just a clean-up of commit 3791f29b08 using the new parameter of
virProcessSetAffinity() introduced in commit 9514e24984 so that there is
no error reported in the logs.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In the past we had to declare @cfg and then explicitly unref it.
But now, with glib we can use g_autoptr() which will do the unref
automatically and thus is more bulletproof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
In the qemuInterfacePrepareSlirp() function, the qemu driver
config is obtained (via virQEMUDriverGetConfig()), but it is
never unrefed leading to mangled refcounter.
Fixes: 9145b3f1cc
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
On shutdown we just stop accepting new jobs for worker thread so that on
shutdown wait we can exit worker thread faster. Yes we basically stop
processing of events for VMs but we are going to do so anyway in case of daemon
shutdown.
At the same time synchronous event processing that some API calls may require
are still possible as per VM event loop is still running and we don't need
worker thread for synchronous event processing.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We are dropping the only reference here so that the event loop thread
is going to be exited synchronously. In order to avoid deadlocks we
need to unlock the VM so that any handler being called can finish
execution and thus even loop thread be finished too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
It it useful to be sure no thread is running after we drop all references to
virEventThread. Otherwise in order to avoid crashes we need to synchronize some
other way or we make extra references in event handler callbacks to all the
object in use. And some of them are not prepared to be refcounted.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This hunk was introduced in [1] in order to avoid loosing
events from monitor on stopping qemu process. But as explained
in [2] on destroy we won't get neither EOF nor any other
events as monitor is just closed. In case of crash/shutdown
we won't get any more events as well and qemuDomainObjStopWorker
will be called by qemuProcessStop eventually. Thus let's
remove qemuDomainObjStopWorker from qemuProcessHandleMonitorEOF
as it is not useful anymore.
[1] e6afacb0f: qemu: start/stop an event loop thread for domains
[2] d2954c072: qemu: ensure domain event thread is always stopped
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Currently we have issues like [1] on libvirtd shutdown as we cleanup while RPC
and other threads are still running. Let's finish all threads other then main
before cleanup.
The approach to finish threads is suggested in [2]. In order to finish RPC
threads serving API calls we let the event loop run but stop accepting new API
calls and block processing any pending API calls. We also inform all drivers of
shutdown so they can prepare for shutdown too. Then we wait for all RPC threads
and driver's background thread to finish. If finishing takes more then 15s we
just exit as we can't safely cleanup in time.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1828207
[2] https://www.redhat.com/archives/libvir-list/2020-April/msg01328.html
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
virNetServerClose and virNetServerShutdownWait are used to start net server
threads shutdown and wait net server threads to actually finish respectively
during net daemon shutdown procedure.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The function is used to set shutdown prepare and wait callbacks. Prepare
callback is used to inform other threads of the daemon that the daemon will be
closed soon so that they can start to shutdown. Wait callback is used to wait
for other threads to actually finish.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Second unref was added in [1]. We don't need it actually as
we pass free callback to virNetSocketAddIOCallback thus
when we call virNetSocketRemoveIOCallback the extra ref for
callback will be dropped without extra efforts.
[1] 355d8f470f: virNetServerServiceClose: Don't leak sockets
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Stop just send signal for threads to exit when they finish with
current task. Drain waits when all threads will finish.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Even if we have no priority threads on pool creation we can add them thru
virThreadPoolSetParameters later.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
stateShutdownPrepare is supposed to inform driver that it will be closed soon
so that the driver can prepare and finish all background threads quickly on
stateShutdownWait call.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
This allows:
a) migration without access to network
b) complete control of the migration stream
c) easy migration between containerised libvirt daemons on the same host
Resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
A long time ago we introduced a dummy tap device (e.g. virbr0-nic) that
we attached to the bridge device created for virtual networks:
commit 5754dbd56d
Author: Laine Stump <laine@redhat.com>
Date: Wed Feb 9 03:28:12 2011 -0500
Give each virtual network bridge its own fixed MAC address
This was a hack to workaround a Linux kernel bug where it would not
honour any attempt to set a MAC address on a bridge. Instead the
bridge would adopt the numerically lowest MAC address of all NICs
attached to the bridge. This lead to the MAC addrss of the bridge
changing over time as NICs were attached/detached.
The Linux bug was actually fixed 3 years before the libvirt
workaround was added in:
commit 92c0574f11598c8036f81e27d2e8bdd6eed7d76d
Author: Stephen Hemminger <shemminger@vyatta.com>
Date: Tue Jun 17 16:10:06 2008 -0700
bridge: make bridge address settings sticky
Normally, the bridge just chooses the smallest mac address as the
bridge id and mac address of bridge device. But if the administrator
has explictly set the interface address then don't change it.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
but libvirt needed to support RHEL-5 kernels at that time, so
none the less added the workaround.
We have long since dropped support for RHEL-5 vintage distros,
so there's no reason to keep the dummy tap device for the purpose
of setting the bridge MAC address.
Later the dummy TAP device was used for a second purpose related
to IPv6 DAD (Duplicate Address Detection) in:
commit db488c7917
Author: Benjamin Cama <benoar@dolka.fr>
Date: Wed Sep 26 21:02:20 2012 +0200
network: fix dnsmasq/radvd binding to IPv6 on recent kernels
This was again dealing with a regression in the Linux kernel, where
if there were no devices attached to the bridge in the UP state,
IPv6 DAD would not be performed. The virbr0-nic was attached but
in the DOWN state, so the above libvirt fix tenporarily brought
the NIC online. The Linux commit causing the problem was in v2.6.38
commit 1faa4356a3bd89ea11fb92752d897cff3a20ec0e
Author: stephen hemminger <shemminger@vyatta.com>
Date: Mon Mar 7 08:34:06 2011 +0000
bridge: control carrier based on ports online
A short while later Linux was tweaked so that DAD would still occur
if the bridge had no attached devices at all in 3.1:
commit b64b73d7d0c480f75684519c6134e79d50c1b341
Author: stephen hemminger <shemminger@vyatta.com>
Date: Mon Oct 3 18:14:45 2011 +0000
bridge: leave carrier on for empty bridge
IOW, the only reason we need the DAD hack of bringing virbr0-nic
online is because virbr0-nic exists. Once it doesn't exist, then
we hit the "empty bridge" case which works in Linux.
We can rely on distros having Linux kernel >= 3.1, so both things
that the virbr0-nic are doing are redundant.
Fixes https://gitlab.com/libvirt/libvirt/-/issues/53
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Consider a host with 8 CPUs. There are the following possible scenarios
1. Bare metal; libvirtd has affinity of 8 CPUs; QEMU should get 8 CPUs
2. Bare metal; libvirtd has affinity of 2 CPUs; QEMU should get 8 CPUs
3. Container has affinity of 8 CPUs; libvirtd has affinity of 8 CPus;
QEMU should get 8 CPUs
4. Container has affinity of 8 CPUs; libvirtd has affinity of 2 CPus;
QEMU should get 8 CPUs
5. Container has affinity of 4 CPUs; libvirtd has affinity of 4 CPus;
QEMU should get 4 CPUs
6. Container has affinity of 4 CPUs; libvirtd has affinity of 2 CPus;
QEMU should get 4 CPUs
Scenarios 1 & 2 always work unless systemd restricted libvirtd privs.
Scenario 3 works because libvirt checks current affinity first and
skips the sched_setaffinity call, avoiding the SYS_NICE issue
Scenario 4 works only if CAP_SYS_NICE is availalbe
Scenarios 5 & 6 works only if CAP_SYS_NICE is present *AND* the cgroups
cpuset is not set on the container.
If libvirt blindly ignores the sched_setaffinity failure, then scenarios
4, 5 and 6 should all work, but with caveat in case 4 and 6, that
QEMU will only get 2 CPUs instead of the possible 8 and 4 respectively.
This is still better than failing.
Therefore libvirt can blindly ignore the setaffinity failure, but *ONLY*
ignore it when there was no affinity specified in the XML config.
If user specified affinity explicitly, libvirt must report an error if
it can't be honoured.
Resolves: https://bugzilla.redhat.com/1819801
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The conditional was removed in
commit ebbf8ebe4f
Author: Ján Tomko <jtomko@redhat.com>
Date: Tue Sep 1 22:56:37 2020 +0200
util: virnetdevtap: stats: fix txdrop on FreeBSD
That commit was correct about this no longer being required for FreeBSD,
but missed that the code is also built on macOS.
Rather than testing for this field in meson though, we can simply use
a platform conditional test in the code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Local socket connections were outright disabled because there was no "server"
part in the URI. However, given how requirements and usage scenarios are
evolving, some management apps might need the source libvirt daemon to connect
to the destination daemon over a UNIX socket for peer2peer migration. Since we
cannot know where the socket leads (whether the same daemon or not) let's decide
that based on whether the socket path is non-standard, or rather explicitly
specified in the URI. Checking non-standard path would require to ask the
daemon for configuration and the only misuse that it would prevent would be a
pretty weird one. And that's not worth it. The assumption is that whenever
someone uses explicit UNIX socket paths in the URI for migration they better
know what they are doing.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Adds new typed param for migration and uses this as a UNIX socket path that
should be used for the NBD part of migration. And also adds virsh support.
Partially resolves: https://bugzilla.redhat.com/1638889
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
For this we need to make the function accessible (at least privately). The
behaviour will change in following patches and the test helps explaining the
change.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Clean up the semantics by using one extra self-describing variable.
This also fixes the port allocation when the port is specified.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Instead of saving some data from a union up front and changing an overlayed
struct before using said data, let's just set the new values after they are
decided. This will increase the readability of future commit(s).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In 6.7.0 release I've changed how domain namespace is built and
populated. Previously it used to be done from a pre-exec hook
(ran in the forked off child, just before dropping all privileges
and exec()-ing QEMU), which not only meant we had to have two
different code paths for creating a node in domain's namespace
(one for this pre-exec hook, the other for hotplug ran from the
daemon), it also proved problematic because it was leaking FDs
into QEMU process.
To mitigate this problem, we've not only ditched libdevmapper
from the NS population process, I've also dropped the pre-exec
code and let the NS be populated from the daemon (using the
hotplug code). But, I was not careful when doing so, because the
pre-exec code was tolerant to files that doesn't exist, while
this new code isn't. For instance, the very first thing that is
done when the new NS is created is it's populated with
@defaultDeviceACL which contain files like /dev/null, /dev/zero,
/dev/random and /dev/kvm (and others). While the rest will
probably exist every time, /dev/kvm might not and thus the new
code I wrote has to be tolerant to that.
Of course, users can override the @defaultDeviceACL (by setting
cgroup_device_acl in qemu.conf) and remove /dev/kvm (which is
acceptable workaround), but we definitely want libvirt to work
out of the box even on hosts without KVM.
Fixes: 9048dc4e62
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For older FreeBSD, we needed an ifdef guard to use
if_data.ifi_oqdrops, which was introduced by:
commit 61bbdbb94c
Implement interface stats for BSD
But when we dropped the check because we deprecated
building on FreeBSD-10 in:
commit 83131d9714
configure: drop check for unsupported FreeBSD
We started building the wrong side of the ifdef.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Fixes: 83131d9714
Reviewed-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
We need to use @default_auth@ in the augeas test case to match
its use in the main libvirtd.conf.in file.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
