Commit Graph

63 Commits

Author SHA1 Message Date
Matthew Booth
a8eb010ea2 Make QEMU driver use -chardev everywhere if available
Change -monitor, -serial and -parallel output to use -chardev if it is
available.
* src/qemu/qemu_conf.c: Update qemudBuildCommandLine to use -chardev where
  available.
* tests/qemuxml2argvtest.c tests/qemuxml2argvdata/: Add -chardev equivalents
  for all current serial and parallel tests.
2009-12-14 10:38:44 +01:00
Daniel P. Berrange
3a4f172fdd Support for JSON mode monitor
Initial support for the new QEMU monitor protocol  using JSON
as the data encoding format instead of plain text

* po/POTFILES.in: Add src/qemu/qemu_monitor_json.c
* src/qemu/qemu_conf.c, src/qemu/qemu_conf.h: Hack to turn on QMP
  mode. Replace with a version number check on >= 0.12 later
* src/qemu/qemu_monitor.c: Delegate to json monitor if enabled
* src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h: Add
  impl of QMP protocol
* src/Makefile.am: Add src/qemu/qemu_monitor_json.{c,h}
2009-12-08 13:46:54 +00:00
Daniel P. Berrange
e7c78b0a94 Support QEMU's virtual FAT block device driver
Introduce a new type="dir"  mode for <disks> that allows use of
QEMU's  virtual FAT block device driver. eg

    <disk type='dir' device='floppy'>
      <source dir='/tmp/test'/>
      <target dev='fda' bus='fdc'/>
      <readonly/>
    </disk>

gets turned into

  -drive file=fat:floppy:/tmp/test,if=floppy,index=0

Only read-only disks are supported with virtual FAT mode

* src/conf/domain_conf.c, src/conf/domain_conf.h: Add type="dir"
* docs/schemas/domain.rng: Document new disk type
* src/xen/xend_internal.c, src/xen/xm_internal.c: Raise error for
  unsupported disk types
* tests/qemuxml2argvdata/qemuxml2argv-disk-cdrom-empty.args: Fix
  empty disk file handling
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-fat.xml,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.args,
  tests/qemuxml2argvdata/qemuxml2argv-floppy-drive-fat.xml
  tests/qemuxml2argvtest.c: Test QEMU vitual FAT driver
* src/qemu/qemu_conf.c: Support generating fat:/some/dir type
  disk args
* src/security/security_selinux.c: Temporarily skip labelling
  of directory based disks
2009-11-23 12:17:16 +00:00
Matthew Booth
af249ea468 Support for <channel> in domain and QEmu backend
allows the following to be specified in a domain:
<channel type='pipe'>
  <source path='/tmp/guestfwd'/>
  <target type='guestfwd' address='10.0.2.1' port='4600'/>
</channel>

* proxy/Makefile.am: add network.c as dep of domain_conf.c
* docs/schemas/domain.rng src/conf/domain_conf.[ch]: extend the domain
  schemas and the parsing/serialization side for the new construct

QEmu support will add the following on the qemu command line:
 -chardev pipe,id=channel0,path=/tmp/guestfwd
 -net user,guestfwd=tcp:10.0.2.1:4600-chardev:channel0

* src/qemu/qemu_conf.c: Add argument output for channel
* tests/qemuxml2(argv|xml)test.c: Add test for <channel> domain syntax
2009-11-05 15:31:03 +01:00
Daniel P. Berrange
b81a7ece97 Fix handling of Xen(ner) detection
Latest upstream QEMU can be built with Xen support, which introduces
a -xen-domid argument. This was  mistakenly detected as -domid due
to old Xenner support. Adapt to cope with both syntax. Also only
set domid if the virt type is xen, or the guest type is xen

* src/qemu_conf.c, src/qemu_conf.h: Detect new -xen-domid flag in
  preference to -domid.
* tests/qemuxml2argvdata/qemuxml2argv-bootloader.args,
  tests/qemuxml2argvdata/qemuxml2argv-input-xen.args: Add missing
  -domid param
* tests/qemuxml2argvdata/qemuxml2argv-misc-uuid.args: Remove bogus
  -boot param.
* tests/qemuxml2argvtest.c: Add missing QEMUD_CMD_FLAG_DOMID params
2009-09-22 16:13:33 +01:00
Daniel P. Berrange
58355a5bfb Move QEMU driver to src/qemu/
* src/qemu_conf.c, src/qemu_conf.h, src/qemu_driver.c,
  src/qemu_driver.h: Move to src/qemu/
* daemon/qemud.c, src/Makefile.am, tests/qemuargv2xmltest.c,
  tests/qemuhelptest.c, tests/qemuxml2argvtest.c,
  tests/qemuxml2xmltest.c: Adapt for changed paths
2009-09-21 14:41:43 +01:00
Daniel P. Berrange
cbe63e529d Fix more OOM handling bugs
* src/qemu_conf.c: Fix leak of values upon OOM
* src/xend_internal.c: Fix missing check for OOM failure
* tests/qemuargv2xmltest.c, tests/qemuxml2argvtest.c: Free
  stateDir upon exit to avoid leak
2009-09-10 14:30:00 +01:00
Mark McLoughlin
e52d608ddf Test that domain-specific qemu machine types are used correctly
* tests/testutilsqemu.c: add a machine types list for /usr/bin/kvm
  which doesn't have any aliases, while the guest has aliases

* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases2.*,
  tests/qemuxml2argvtest.c: add a test using /usr/bin/kvm and make
  sure that 'pc' machine type doesn't get canonicalized using the
  aliases in the guest machine type list
2009-09-10 12:37:43 +01:00
Mark McLoughlin
aa67241bde Test qemu machine aliases
* tests/testutilsqemu.c: make 'pc' an alias for qemu-system-x86_64

* tests/qemuxml2argvdata/qemuxml2argv-machine-aliases1.*,
  tests/qemuxml2argvtest.c: add a test which uses qemu-system-x86_64
  and make sure the machine type is canonicalized.
2009-09-10 12:37:42 +01:00
Mark McLoughlin
6e7ab46106 Canonicalize the qemu machine type in qemuxml2argvtest
This doesn't have any affect on the current tests because we don't have
any machine aliases in the current test data.

* src/qemu_conf.h, src/qemu_driver.c: expose qemudCanonicalizeMachine()
  for the tests

* tests/qemuxml2argvtest.c: canonicalize the machine type
2009-09-10 12:37:42 +01:00
Daniel P. Berrange
85d15b5143 Add support for setting disk drive serial numbers
* docs/schemas/domain.rng: Add <serial> element to disks
* src/domain_conf.h, src/domain_conf.c: XML parsing and
  formatting for disk serial numbers
* src/qemu_conf.c: Set serial number when launching guests
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.args,
  tests/qemuxml2argvdata/qemuxml2argv-disk-drive-shared.xml: Add
  serial number to XML test
2009-09-03 13:53:34 +01:00
Daniel P. Berrange
d823a05aef Support configuration of huge pages in guests
Add option to domain XML for

     <memoryBacking>
        <hugepages/>
     </memoryBacking>

* configure.in: Add check for mntent.h
* qemud/libvirtd_qemu.aug, qemud/test_libvirtd_qemu.aug, src/qemu.conf
  Add 'hugetlbfs_mount' config parameter
* src/qemu_conf.c, src/qemu_conf.h: Check for -mem-path flag in QEMU,
  and pass it when hugepages are requested.
  Load hugetlbfs_mount config parameter, search for mount if not given.
* src/qemu_driver.c: Free hugetlbfs_mount/path parameter in driver shutdown.
  Create directory for QEMU hugepage usage, chowning if required.
* docs/formatdomain.html.in: Document memoryBacking/hugepages elements
* docs/schemas/domain.rng: Add memoryBacking/hugepages elements to schema
* src/util.c, src/util.h, src/libvirt_private.syms: Add virFileFindMountPoint
  helper API
* tests/qemuhelptest.c: Add -mem-path constants
* tests/qemuxml2argvtest.c, tests/qemuxml2xmltest.c: Add tests for hugepage
  handling
* tests/qemuxml2argvdata/qemuxml2argv-hugepages.xml,
  tests/qemuxml2argvdata/qemuxml2argv-hugepages.args: Data files for
  hugepage tests
2009-09-03 13:51:55 +01:00
Mark McLoughlin
d4528d9ac2 Detect KVM's PCI device assignment support
PCI device assignment is only supported in KVM's fork of qemu, so we
should really detect its availability and give a nice error if its
not supported.

* src/qemu_conf.[ch]: introduce QEMUD_CMD_FLAG_PCIDEVICE indicating
  that the -pcidevice command line option is available

* tests/*: update the tests
2009-08-14 08:31:11 +01:00
Mark McLoughlin
c23dae4e5c Assign names to qemu NICs and network backends
We need these so that we can remove the devices via the monitor.

* src/domain_conf.h: add nic_name and hostnet_name to virDomainNetDef

* src/domain_conf.c: free nic_name and hostnet_name

* src/qemu_conf.c: add qemuAssignNetNames(), use it if qemu has
  support for the param and pass the names on the command line

* tests/qemuxml2argv*: add a test for this
2009-07-22 11:34:06 +01:00
Mark McLoughlin
62455ed872 Switch to using a unix socket for the qemu monitor
We keep support for the pty based monitor so that we can re-connect
to VMs started by older versions of libvirtd.

* src/domain_conf.c: handle formatting and parsing unix monitors

* src/qemu_driver.c: add qemudOpenMonitorUnix(), remove the monitor
  pty path searching from qemudFindCharDevicePTYs(), switch
  qemudStartVMDaemon() and qemuDomainXMLToNative() to using a unix
  monitor

* tests/qemuxml2argvtest.c: switch to using a unix monitor

* tests/qemuxml2argvdata/qemuxml2argv-*.args: update test data
2009-07-09 20:04:09 +01:00
Mark McLoughlin
05d377bdd2 Add the monitor type to the domain state XML
There are no functional changes in this patch apart from adding the
monitor type to the state XML.

The patch mostly consists of switching to use virDomainChrDef every
where to describe the monitor.

* src/domain_conf.h: replace monitorpath with monitor_chr

* src/domain_conf.c: handle parsing the monitor type and initializing
  monitor chr

* src/qemu_conf.[ch]: make qemudBuildCommandLine take a
  virDomainChrDefPtr and use that to build the -monitor parameter

* src/qemu_driver.c: split pty specific and common code from
  qemudOpenMonitor, have qemudStartVMDaemon() initialize monitor_chr

* tests/qemuxml2argvtest.c: update for qemudBuildCommandLine() change
2009-07-09 20:04:07 +01:00
Daniel P. Berrange
ad6d5acb42 Support <video> element for QEMU guests
* src/qemu_conf.c, src/qemu_conf.h: Use -vga or -std-vga
	when starting guests if video card is present
	* tests/qemuhelptest.c: Change to use constants instead
	of hardcoded hex numbers, and add VGA support
	* tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.args,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-sasl.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc-tls.xml,
	tests/qemuxml2argvdata/qemuxml2argv-graphics-vnc.xml,
	tests/qemuxml2argvdata/qemuxml2argv-input-xen.xml: Add <video>
	element for testing graphics adapter
	* tests/qemuxml2argvtest.c: Add QEMUD_CMD_FLAG_VGA flag
	* tests/qemuxml2xmltest.c: Add missing graphics-vnc-sasl/tls tests
2009-07-08 13:40:32 +01:00
Cole Robinson
659bd66529 Check that '-drive format=' is supported before adding to qemu cmdline.
Qemu < 0.10.0 did not support it, and virt-* tools now try to add this by
default, so it's extra important we ensure the option exists.
2009-06-16 15:17:10 +00:00
Daniel P. Berrange
9a15c48d2d Switch to using virDomainDefPtr for building command line in QEMU driver 2009-04-19 14:50:01 +00:00
Daniel P. Berrange
b44af714d3 Support SASL auth for VNC server. 2009-03-16 13:54:26 +00:00
Jim Meyering
d26c3387df tests: diagnose more open failures
* tests/qemuxml2argvtest.c: Revert the change,
"tests: diagnose open failure" of 2009-01-30.
* tests/testutils.c (virtTestLoadFile): Diagnose failure here.
2009-02-02 20:35:14 +00:00
Jim Meyering
cf1b0f868b tests: diagnose open failure
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Diagnose
failure to open an input file.
2009-01-30 21:59:35 +00:00
Daniel P. Berrange
a6ef2e0055 Fix ifname= passing to QEMU for type=ethernet network config 2009-01-30 17:17:58 +00:00
Daniel P. Berrange
67e7416119 Support disk caching mode config 2009-01-30 17:15:39 +00:00
Daniel P. Berrange
4f4bfbc79e Fix save/restore migrate syntax for new KVM releases 2009-01-29 17:27:54 +00:00
Daniel P. Berrange
ad70b32414 Support QEMU disk format specification in XML 2009-01-23 16:22:20 +00:00
Daniel Veillard
c8ef64bdd7 Add tests and docs for the new PCI passthrough format
* docs/formatdomain.html.in docs/libvirt.rng docs/formatdomain.html:
  document the new PCI passthrough format
* tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-pci-address.xml:
  and add a regression test for it.
Daniel
2009-01-12 15:09:19 +00:00
Guido Günther
830ba76c3e let qemu/kvm instances write a pid file 2008-12-18 15:22:49 +00:00
Daniel Veillard
a3d570c7b9 Adding support for SDL fullscreen option
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.args
  tests/qemuxml2argvdata/qemuxml2argv-graphics-sdl-fullscreen.xml:
  slightly modified patch for SDL fullscreen from Itamar Heim
* docs/formatdomain.html docs/formatdomain.html.in docs/libvirt.rng:
  update the schemas and docs about the sdl graphic element attributes
* AUTHORS: add Itamar Heim
Daniel
2008-12-11 11:44:30 +00:00
Guido Günther
1d7d2fae10 Differentiate between active and inactive configs by honoring the
VIR_DOMAIN_XML_INACTIVE flag.
2008-12-04 12:02:59 +00:00
Daniel P. Berrange
78439117bc Add support for -uuid and -domid args to QEMU 2008-11-04 22:15:30 +00:00
Daniel P. Berrange
7e0d3e62e9 Support SDL config with QEMU guests 2008-10-10 16:52:20 +00:00
Jim Meyering
efb8492b9d tests: append a newline to expected-output files lacking NL-at-EOF
* tests/qemuxml2argvtest.c (testCompareXMLToArgvFiles): Adjust the
code that creates "actual" output, so that it too produces a
newline-terminated buffer.
* tests/qemuxml2argvdata/*.args: Append a newline to each, via:
for i in $(find|grep '\.args$'); do echo >> $i;done
2008-08-11 12:29:58 +00:00
Daniel P. Berrange
b3728d7d72 Fix const-correctness of virRUn and virExec 2008-08-08 15:43:38 +00:00
Daniel Veillard
5ba372306a llow to add a disk as an USB device (QEmu/KVM)
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: patch from Guido Günther allowing to add
  disk as USB devices
* docs/libvirt.rng: extend the schemas for the new value
* tests/qemuxml2argvdata/qemuxml2argv-disk-usb.args
  tests/qemuxml2argvdata/qemuxml2argv-disk-usb.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: add a specific
  test to the regression suite
Daniel
2008-08-08 15:03:00 +00:00
Daniel Veillard
d1710d35ea Extend parser and add support for USB devices in QEmu/KVM
* src/domain_conf.c src/domain_conf.h src/qemu_conf.c
  src/qemu_driver.c: Patch from Guido Günther allowing to pass
  usb devices to qemu/kvm
* docs/libvirt.rng: add the new functionality to the grammar
* tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-address.xml
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.args
  tests/qemuxml2argvdata/qemuxml2argv-hostdev-usb-product.xml
  tests/qemuxml2argvtest.c tests/qemuxml2xmltest.c: adding examples
  to the regression tests
* libvirt.spec.in: fix the licence tag
Daniel
2008-08-08 14:27:05 +00:00
Chris Lalancette
654c5714bf The new generic domain re-factor introduced a small regression into the drive
handling code.  In particular, if you had a section of XML like:

    <disk type='file' device='cdrom'>
      <target dev='hdc' bus='ide'/>
      <readonly/>
    </disk>

This used to work with older libvirt, but now fails.  This is because we are
actually passing the literal string (null) to the qemu command-line, which qemu
barfs on.  This patch fixes it up by making it blank, which allows qemu to
continue on it's merry way.

Signed-off-by: Chris Lalancette <clalance@redhat.com>
2008-07-29 12:09:21 +00:00
Daniel P. Berrange
6385fe3ede Switch QEMU driver over to generic domain APIs 2008-07-11 19:34:11 +00:00
Daniel P. Berrange
69582431a0 Fix booting QEMU off CDROM devices with -drive arg 2008-07-11 09:56:23 +00:00
Daniel P. Berrange
4b23495509 Convert test suites over to new test infrastructure 2008-05-29 15:31:49 +00:00
Daniel P. Berrange
40a82f3066 Make QEMU test suite independant of host OS capabilities 2008-05-16 16:51:30 +00:00
Daniel P. Berrange
763a59d84d Support Xenner bootloader 2008-05-15 16:21:11 +00:00
Daniel P. Berrange
0f1b6dd06a Pass -name arg to QEMU when available 2008-05-15 16:15:17 +00:00
Daniel P. Berrange
3a7b528d4b Add support for Xen input device in QEMU driver for xenner 2008-05-15 16:11:40 +00:00
Daniel P. Berrange
2c37f47985 Support paravirt disk configuration for xenner guests 2008-05-15 16:05:41 +00:00
Daniel P. Berrange
098ba1a433 Add support for -drive QEMU syntax, and virtio bus / disk type 2008-05-09 16:41:19 +00:00
Daniel Veillard
70f446631f Sound support for QEmu and Xen
* src/qemu_conf.c src/qemu_conf.h src/xend_internal.c
  src/xend_internal.h src/xm_internal.c src/xml.c src/xml.h:
  Patch from Cole Robinson adding sound support for QEmu and Xen
* tests/qemuxml2argvtest.c tests/sexpr2xmltest.c
  tests/xmconfigtest.c tests/xml2sexprtest.c:
  Associated regression tests
Daniel
2008-05-07 14:04:40 +00:00
Daniel P. Berrange
159cb2b97c Added support for network interface model setting 2008-04-30 12:30:55 +00:00
Daniel P. Berrange
49956f0469 Implement serial & parallel device support for QEMU driver 2008-04-25 20:46:13 +00:00
Jim Meyering
dc42a9d2de remove Vim and Emacs variable settings from C source files
Done with these commands:
git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* vim:(.|\n)*,\n,'

git grep -l Local.variab|xargs \
  perl -0x3b -pi -e 's,\n+/\*\n \* Local variables:\n(.|\n)*,\n,'
2008-04-10 16:53:29 +00:00