According to our parser (virDomainTPMDefParseXML()) the version
is an optional attribute and independent of TPM backend type.
Therefore, it's not a choice group, which is what our RNG schema
suggests.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Currently, swtpm TPM state file is removed when a transient domain is
powered off or undefined. When we store TPM state on a shared storage
such as NFS and use transient domain, TPM states should be kept as it is.
Add per-TPM emulator option `persistent_sate` for keeping TPM state.
This option only works for the emulator type backend and looks as follows:
<tpm model='tpm-tis'>
<backend type='emulator' persistent_state='yes'/>
</tpm>
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the capabilities include a counter element, e.g.
<counter name='tsc' frequency='2591999000' scaling='no'/>
the XML could not be validated:
$ virsh capabilities > cap.xml
$ virsh [hypervisor-]cpu-compare cap.xml --validate
error: Failed to compare hypervisor CPU with cap.txt
error: XML document failed to validate against schema: Unable to validate doc against /usr/share/libvirt/schemas/cpu.rng
Did not expect element counter there
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The duplicate had the "dies" attribute missing, causing
$ virsh capabilities > cap.xml
$ virsh [hypervisor-]cpu-compare cap.xml --validate
to fail with
error: Failed to compare hypervisor CPU with cap.xml
error: XML document failed to validate against schema: Unable to validate doc against /usr/share/libvirt/schemas/cpu.rng
Invalid attribute dies for element topology
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since its introduction in v1.2.19-rc1~8 our schema mandates that
LXC domain namespace child elements appear either all three at
once or not at all:
<lxc:namespace>
<lxc:sharenet type='netns' value='red'/>
<lxc:shareipc type='pid' value='12345'/>
<lxc:shareuts type='name' value='container1'/>
</lxc:namespace>
This is not mandated by our parser though. Neither by code that
later uses it (virLXCProcessSetupNamespaces()). Relax the schema.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
Add support for AP matrix device in libvirt node device driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#the-design
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Each AP card device can support upto 256 AP queues. AP queues are
also detected by udev, so add support for libvirt nodedev driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Introduce support for the Adjunct Processor (AP) crypto card device.
Udev already detects the device, so add support for libvirt nodedev
driver.
https://www.kernel.org/doc/html/latest/s390/vfio-ap.html#ap-architectural-overview
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The NCR53C90 is the built-in SCSI controller on all sparc machine types,
and some mips and m68k machine types.
The DC390 and AM53C974 are PCI SCSI controllers that can be added to any
PCI machine.
These are only interesting for emulating obsolete hardware platforms.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU version 4.2 introduced a performance feature under commit
d645e13287 ("kvm: i386: halt poll control MSR support").
This patch adds a new KVM feature 'poll-control' to set this performance
hint for KVM guests. The feature is off by default.
To enable this hint and have libvirt add "-cpu host,kvm-poll-control=on"
to the QEMU command line, the following XML code needs to be added to the
guest's domain description:
<features>
<kvm>
<poll-control state='on'/>
</kvm>
</features>
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add detection of mdev_types capability to channel subsystem devices.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
The unsignedInt XML schema type allows for values up to 2^32 - 1, i.e.,
using 4294967296 or greater TSC frequency would fail schema validation.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Refactor mdev_types into standalone define for later reuse.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Expose QEMU's 9pfs 'fmode' and 'dmode' options via attributes on the
'filesystem' node in the domain XML. These options control the creation
mode of files and directories, respectively, when using
accessmode=mapped.
Signed-off-by: Brian Turek <brian.turek@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
virsh # nodedev-dumpxml vdpa_vdpa0
<device>
<name>vdpa_vdpa0</name>
<path>/sys/devices/vdpa0</path>
<parent>computer</parent>
<driver>
<name>vhost_vdpa</name>
</driver>
<capability type='vdpa'>
<chardev>/dev/vhost-vdpa-0</chardev>
</capability>
</device>
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
vmware's network names can contain space and they are used as bridge
source. Modify the schema to allow it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The 'vmware' private namespace wasn't present in our schema definition
making all XMLs having the <datacenterpath> element invalid.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The reference string parser tolerates some leading/trailing whitespace
for the reference strings as witnessed by
tests/nwfilterxml2xmlin/iter-test3.xml
Allow them in the schema so that the test passes schema validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The parser for the 'ipsetflags' accepts the 'src' and 'dst' values
stripping case. Express the same in the schema to pass validation of any
accepted string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Accept the 'datastore' variant of disk source specification used by our
VMware driver.
https://libvirt.org/drvesx.html#datastore
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Pino Toscano <ptoscano@redhat.com>
These XML attributes have been mandatory since the introduction of SEV
support to libvirt. This design decision was based on QEMU's
requirement for these to be mandatory for migration purposes, as
differences in these values across platforms must result in the
pre-migration checks failing (not that migration with SEV works at the
time of this patch).
Expecting the user to specify these is cumbersome and the same XML
cannot be re-used across different revisions of SEV. Since
we have SEV platform information saved in QEMU capabilities, we can
make the attributes optional and should fill them in automatically
in the QEMU driver right before starting it.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/57
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
In fee8a61d29 a new attribute to <memballoon/> was introduced:
free-page-reporting. We don't really like hyphens in attribute
names. Use camelCase instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This will add the proper documentation and parser support for the free page
reporting feature that is introduced in QEMU 5.1.
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This element is not always present, see e.g.
x86_64-cpuid-Xeon-X5460-host.xml, x86_64-cpuid-Pentium-P6100-host.xml,
or x86_64-cpuid-EPYC-7601-32-Core-ibpb-host.xml.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
`virsh cpu-compare` and `virsh hypervisor-cpu-compare` both accept
guest and host cpu definitions. This schema is able to validate both
possibilities.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This also inlines the defintions for "cpufeature", "cpuspec",
"featureName" and "pagesHost", as "cpu" was the only user.
Doing so avoids a naming collision when cputypes.rng is included in
other schemas in a later patch.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Quotation marks were used ~ 7000 times, apostrophes ~ 3000 times.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Introduce 'isa' controller type. In domain XML it looks this way:
...
<controller type='isa' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01'
function='0x0'/>
</controller>
...
Currently, this is needed for the bhyve driver to allow choosing a
specific PCI address for that. In bhyve, this controller is used to
attach serial ports and a boot ROM.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Make channel subsystem (CSS) devices available in the node_device driver.
The CCS devices reside in the computer system and provide CCW devices, e.g.:
+- css_0_0_003a
|
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
By default Xen only allows guests to write "known safe" values into PCI
configuration space, yet many devices require writes to other areas of
the configuration space in order to operate properly. To allow writing
any values Xen supports the 'permissive' setting, see xl.cfg(5) man page.
This change models Xen's permissive setting by adding a writeFiltering
attribute on the <source> element of a PCI hostdev. When writeFiltering
is set to 'no', the Xen permissive setting will be enabled and guests
will be able to write any values into the device's configuration space.
The permissive setting remains disabled in the absense of the
writeFiltering attribute, of if it is explicitly set to 'yes'.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
So far, the <cell/> element can have two types of children
elements: <distances/> and <cache/> (which can be repeated more
times). However, there is no reason to require specific order in
input XML. Allow elements to be interleaved.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Xen supports passing arbitrary arguments to the QEMU device model via
the 'extra' member of the public libxl_domain_build_info structure.
This patch adds a 'xen' namespace extension, similar to the QEMU and
bhyve drivers, to map arbitrary arguments to the 'extra' member. Only
passthrough of arguments is supported. Passthrough of environment
variables or capabilities adjustments is not supported.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a new device element "<audio>" which allows
to map guest sound device specified using the "<sound>"
element to specific audio backend.
Example:
<sound model='ich7'>
<audio id='1'/>
</sound>
<audio id='1' type='oss'>
<input dev='/dev/dsp0'/>
<output dev='/dev/dsp0'/>
</audio>
This block maps to OSS audio backend on the host using
/dev/dsp0 device for both input (recording)
and output (playback).
OSS is the only backend supported so far.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Add 'ich7' sound model. This is a preparation for sound support in
bhyve, as 'ich7' is the only model it supports.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We already allow controlling the initiator IQN for iSCSI based disks.
Add the same for host devices.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Role(master or peer) controls how the domain behaves on migration.
For more details about migration with ivshmem, see
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/system/ivshmem.rst;hb=HEAD
It's a optional attribute in libvirt, and qemu will choose default
role for ivshmem device if the user is not specified.
With device property 'role', the value can be 'master' or 'peer'.
- 'master' (means 'master=on' in qemu), the guest will copy
the shared memory on migration to the destination host.
- 'peer' (means 'master=off' in qemu), the migration is disabled.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Yang Hang <yanghang44@huawei.com>
Signed-off-by: Wang Xin <wangxinxin.wang@huawei.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:
<features>
<cow state='yes|no'/>
</features>
If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.
Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "no", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
VMX conversion parts rewritten to apply on top of previously merged
support for type='generated|static'
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is only used in the ESX driver where, when set to "static", it will
ignore all the checks libvirt does about the origin of the MAC address
(whether or not it's in a VMWare OUI) and forward the original one to
the ESX server telling it not to check it either.
This allows keeping a deterministic MAC address which can be useful for
licensed software which might dislike changes.
Signed-off-by: Bastien Orivel <bastien.orivel@diateam.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
To cite ACPI specification:
Heterogeneous Memory Attribute Table describes the memory
attributes, such as memory side cache attributes and bandwidth
and latency details, related to the System Physical Address
(SPA) Memory Ranges. The software is expected to use this
information as hint for optimization.
According to our upstream discussion [1] this is exposed under
<numa/> as <cache/> under NUMA <cell/> and <latency> or
<bandwidth/> under numa/latencies.
1: https://www.redhat.com/archives/libvir-list/2020-January/msg00422.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
QEMU allows creating NUMA nodes that have memory only.
These are somehow important for HMAT.
With check done in qemuValidateDomainDef() for QEMU 2.7 or newer
(checked via QEMU_CAPS_NUMA), we can be sure that the vCPUs are
fully assigned to NUMA nodes in domain XML.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
The semantics of the backup operation don't strictly require that all
disks being backed up are part of the same incremental part (when a disk
was checkpointed/backed up separately or in a different VM), or even
they may not have a previous checkpoint at all (e.g. when the disk
was freshly hotplugged to the vm).
In such cases we can still create a common checkpoint for all of them
and backup differences according to configuration.
This patch adds a per-disk configuration of the checkpoint to do the
incremental backup from via the 'incremental' attribute and allows
perform full backups via the 'backupmode' attribute.
Note that no changes to the qemu driver are necessary to take advantage
of this as we already obey the per-disk 'incremental' field.
https://bugzilla.redhat.com/show_bug.cgi?id=1829829
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow enabling TLS for the NBD server used to do pull-mode backups. Note
that documentation already mentions 'tls', so this just implements the
schema and XML bits.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
QEMU 4.1.0 introduced a new device type called TPM Proxy, currently
implemented by PPC64 guests via a new virtual device called
'spapr-tpm-proxy' (see QEMU 0fb6bd073230 for more info).
The TPM Proxy device interacts with a TPM Resource Manager, a host
device capable of multiplexing the host TPM with multiple processes.
This allows multiple guests to access some TPM features at the
same time. Note that this mode of operation does not provide
full TPM features to be available for the guest - for that case
the guest still needs to assign a vTPM device (tpm-spapr for
PPC64 guests). Although redundant, there is currently no technical
limitation for a guest to assign both a vTPM and a TPM Proxy at the
same time.
This patch adds documentation and schema for a new TPM model
type called 'spapr-tpm-proxy' that creates this new TPM Proxy
device. This model is valid only for the 'passthrough' backend.
An example of a TPM Proxy device connected to a TPM Resource Manager
'/dev/tpmrm0' will look like this:
<tpm model='spapr-tpm-proxy'>
<backend type='passthrough'>
<device path='/dev/tpmrm0'/>
</backend>
</tpm>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add a new aw_bits attribute to the iommu device to control
the address width of the intel-iommu
Signed-off-by Menno Lageman <menno.lageman@oracle.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Mediated devices support arbitrary vendor-specific attributes that can
be attached to a mediated device. These attributes are ordered, and are
written to sysfs in order after a device is created. This patch adds
support for these attributes to the mdev data types and XML schema.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
When parsing a nodedev xml file, the iommuGroup element should be
optional. This element should be read-only and is determined by the
device driver. While this is a change to existing behavior, it doesn't
break backwards-compatibility because it makes the parser less strict.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Historically IPv6 did not support NAT, so when IPv6 was added to
libvirt's virtual networks, when requesting <forward mode="nat"/>
libvirt will NOT apply NAT to IPv6 traffic, only IPv4 traffic.
This is an annoying historical design decision as it means we
cannot enable IPv6 automatically. We thus need to introduce a
new attribute
<forward mode="nat">
<nat ipv6="yes"/>
</forward>
Reviewed-by: Laine Stump <laine@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
QEMU has -fw_cfg which allows users to tweak how firmware
configures itself and/or provide new configuration blobs.
Introduce new <sysinfo/> type "fwcfg" that will hold these
new blobs.
It's possible to either specify new value as a string or
provide a filename which contents then serve as the value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The attribute is only allowed for host-passthrough CPUs and it can be
used to request only migratable or all supported features to be enabled
in the virtual CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the IBS pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_IBS capability added
in the previous patch.
IBS can have the following values: "broken", "workaround",
"fixed-ibs", "fixed-ccd" and "fixed-na".
This is the XML format for the cap:
<features>
<ibs value='fixed-ibs'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the SBBC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_SBBC capability added
in the previous patch.
Like the previously added CFPC feature, SBBC can have the values
"broken", "workaround" or "fixed". Extra code is required to handle
it since it's not a regular tristate capability.
This is the XML format for the cap:
<features>
<sbbc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds the implementation of the CFPC pSeries feature,
using the QEMU_CAPS_MACHINE_PSERIES_CAP_CFPC capability added
in the previous patch.
CPFC can have the values "broken", "workaround" or "fixed". Extra
code is required to handle it since it's not a regular tristate
capability.
This is the XML format for the cap:
<features>
<cfpc value='workaround'/>
</features>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Both are optional but don't have to be specified together. Fix the
schema.
https://bugzilla.redhat.com/show_bug.cgi?id=1826746
Suggested-by: Yi Sun <yisun@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
If an user is trying to configure a dhcp neetwork settings, it is not
possible to change the leasetime of a range or a host entry. This is
available using dnsmasq extra options, but they are associated with
dhcp-range or dhcp-hosts fields. This patch implements a leasetime for
range and hosts tags. They can be defined under that settings:
<dhcp>
<range ...>
<lease/>
</range>
<host ...>
<lease/>
</host>
</dhcp>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=913446
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
'passthrough' is Xen-Specific guest configuration option new to Xen 4.13
that enables IOMMU mappings for a guest and hence whether it supports PCI
passthrough. The default is disabled. See the xl.cfg(5) man page and
xen.git commit babde47a3fe for more details.
The default state of disabled prevents hotlugging PCI devices. However,
if the guest configuration contains a PCI passthrough device at time of
creation, libxl will automatically enable 'passthrough' and subsequent
hotplugging of PCI devices will also be possible. It is not possible to
unconditionally enable 'passthrough' since it would introduce a migration
incompatibility due to guest ABI change. Instead, introduce another Xen
hypervisor feature that can be used to enable guest PCI passthrough
<features>
<xen>
<passthrough state='on'/>
</xen>
</features>
To allow finer control over how IOMMU maps to guest P2M table, the
passthrough element also supports a 'mode' attribute with values
restricted to snyc_pt and share_pt, similar to xl.cfg(5) 'passthrough'
setting .
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
e820_host is a Xen-specific option, only available for PV domains, that
provides the domain a virtual e820 memory map based on the host one. It
is enabled with a new Xen hypervisor feature, e.g.
<features>
<xen>
<e820_host state='on'/>
</xen>
</features>
e820_host is required when using PCI passthrough and is generally
considered safe for any PV kernel. e820_host is silently ignored if set
in HVM domain configuration. See xl.cfg(5) man page in the Xen
documentation for more details.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Add the appropriate entries into the schema to allow encryption of the
backup or scratch image. Since we use blockdev internals for everything
no changes to the code are actually necessary.
https://bugzilla.redhat.com/show_bug.cgi?id=1811906
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
a <controller type='pci'...> element can now have a "hotplug"
attribute in the <target> subelement. This is intended to control
whether or not the slot(s) of the controller support
hotplugging/unplugging a device:
<controller type='pci' model='pcie-root-port'>
<target hotplug='off'/>
</controller>
The default value of hotplug is "on".
Since support for configuring such an option is hypervisor-dependent
(and will vary among different types of PCI controllers even on a
single hypervisor), no validation is done in this patch - that
validation will be done in the patch that wires support for the
setting into the hypervisor.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Event channels are like PV interrupts and in conjuction with grant frames
form a data transfer mechanism for PV drivers. They are also used for
inter-processor interrupts. Guests with a large number of vcpus and/or
many PV devices many need to increase the maximum default value of 1023.
For this reason the native Xen config format supports the
'max_event_channels' setting. See xl.cfg(5) man page for more details.
Similar to the existing maxGrantFrames option, add a new xenbus controller
option 'maxEventChannels', allowing to adjust the maximum value via libvirt.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Expose the virtio parameter for packed virtqueues as an optional libvirt
XML attribute to virtio-backed devices, e.g.:
<interface type='user'>
<mac address='00:11:22:33:44:55'/>
<model type='virtio'/>
<driver packed='on'/>
</interface>
If the attribute is omitted, the default value for this attribute is 'off' and
regular split virtqueues are used.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Introduce new 'multidevs' option for filesystem.
<filesystem type='mount' accessmode='mapped' multidevs='remap'>
<source dir='/path'/>
<target dir='mount_tag'>
</filesystem>
This option prevents misbehaviours on guest if a qemu 9pfs export
contains multiple devices, due to the potential file ID collisions
this otherwise may cause.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Both <encryption> and <diskSourceCommon> were absent from the <source>
element defined in domainsnapshot.rng
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Erik Skultety <eskultet@redhat.com>
Add a new attribute for holding the query part for http(s) disks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The quotes are forbidden only inside the value, but the value itself may
be enclosed in quotes. Fix the RNG schema and validator and add a test
case.
https://bugzilla.redhat.com/show_bug.cgi?id=1804750
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
ppc64 NVDIMM support was implemented in QEMU by commit [1].
The support is similar to what x86 already does, aside from
an extra 'uuid' element.
This patch introduces a new optional 'uuid' element for the
NVDIMM memory model. This element behaves like the 'uuid'
element of the domain definition - if absent, we'll create
a new one, otherwise use the one provided by the XML.
The 'uuid' element is exclusive to pseries guests and are
unavailable for other architectures.
Next patch will use this new element to add NVDIMM support
for ppc64.
[1] ee3a71e366
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Some disk backends support configuring the readahead buffer or timeout
for requests. Add the knobs to the XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add possibility to specify one or more cookies for http based disks.
This patch adds the config parser, storage and validation of the
cookies.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
To allow turning off verification of SSL cerificates add a new element
<ssl> to the disk source XML which will allow configuring the validation
process using the 'verify' attribute.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Add more elements for tuning the virtiofsd daemon
and the vhost-user-fs device:
<driver type='virtiofs' queue='1024' xattr='on'>
<binary path='/usr/libexec/virtiofsd'>
<cache mode='always'/>
<lock posix='off' flock='off'/>
</binary>
</driver>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Introduce a new 'virtiofs' driver type for filesystem.
<filesystem type='mount' accessmode='passthrough'>
<driver type='virtiofs'/>
<source dir='/path'/>
<target dir='mount_tag'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</filesystem>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Allow adding new groups without changing indentation.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
This is a very simple thing to parse and format, but needs to be done
in 4 places, so two trivial utility functions have been made that can
be called from all the higher level parser/formatters:
<domain><interface>
<domain><interface><actual> (only in domain status)
<network>
<networkport>
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is in the data structure and the parse/format functions, and is
getting passed all around correctly, it just was omitted from the RNG,
which hasn't been noticed because no human is creating <networkport>
XML, and so it's never getting validated against the schema.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We are going to add support for specifying offset and size attributes
which will allow controling where the image and where the guest data
itself starts in the source of the disk. This will be represented by
a <slices> element filled with either a <slice type='storage'> for the
offset of the image format data.
Add the XML documentation and RNG schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This new timer model will be used to control the behavior of the
virtual timer for KVM ARM/virt guests.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
This patch adds support for the tpm-spapr device model for ppc64. The XML for
this type of TPM looks as follows:
<tpm model='tpm-spapr'>
<backend type='emulator'/>
</tpm>
Extend the documentation.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The subelement <teaming> of <interface> devices is used to configure a
simple teaming association between two interfaces in a domain. Example:
<interface type='bridge'>
<source bridge='br0'/>
<model type='virtio'/>
<mac address='00:11:22:33:44:55'/>
<alias name='ua-backup0'/>
<teaming type='persistent'/>
</interface>
<interface type='hostdev'>
<source>
<address type='pci' bus='0x02' slot='0x10' function='0x4'/>
</source>
<mac address='00:11:22:33:44:55'/>
<teaming type='transient' persistent='ua-backup0'/>
</interface>
The interface with <teaming type='persistent'/> is assumed to always
be present, while the interface with type='transient' may be be
unplugged and later re-plugged; the persistent='blah' attribute (and
in the one currently available implementation, also the matching MAC
addresses) is what associates the two devices with each other. It is
up to the hypervisor and the guest network drivers to determine what
to do with this information.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The 'builtin' rng backend model can be used as following:
<rng model='virtio'>
<backend model='builtin'/>
</rng>
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If users wish to use different name for exported disks or bitmaps
the new fields allow to do so. Additionally they also document the
current settings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Update the host CPU code to report the die_id in the NUMA topology
capabilities. On systems with multiple dies, this fixes the bug
where CPU cores can't be distinguished:
<cpus num='12'>
<cpu id='0' socket_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' core_id='1' siblings='3'/>
</cpus>
Notice how core_id is repeated within the scope of the same socket_id.
It now reports
<cpus num='12'>
<cpu id='0' socket_id='0' die_id='0' core_id='0' siblings='0'/>
<cpu id='1' socket_id='0' die_id='0' core_id='1' siblings='1'/>
<cpu id='2' socket_id='0' die_id='1' core_id='0' siblings='2'/>
<cpu id='3' socket_id='0' die_id='1' core_id='1' siblings='3'/>
</cpus>
So core_id is now unique within a (socket_id, die_id) pair.
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Recently CPU hardware vendors have started to support a new structure
inside the CPU package topology known as a "die". Thus the hierarchy
is now:
sockets > dies > cores > threads
This adds support for "dies" in the XML parser, with the value
defaulting to 1 if not specified for backwards compatibility.
For example a system with 64 logical CPUs might report
<topology sockets="4" dies="2" cores="4" threads="2"/>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
There is no need to require users to produce iSCSI disk source
following our ordering of children elements. In fact, we don't
even accept our own order in the schema :(.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Laine Stump <laine@redhat.com>
One of the first versions thought of using disk path as the second
option but this was dropped as being a legacy interface. Remove the
leftover pointless <choice> wrapper for the disk name as there's just
one option now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
While command line arguments are sort of positional (because you
have to have two entries, one for "-arg" the other for "value"),
it doesn't really matter whether env variables come before or
after command line arguments.
And it matters even less when playing with qemu capabilities.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Fabiano Fidêncio <fidencio@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
It will be used to represent the type of a filesystem pool in ESXi.
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
This patch introduces a new PCI hostdev address type called
'unassigned'. This new type gives users the option to add
PCI hostdevs to the domain XML in an 'unassigned' state, meaning
that the device exists in the domain, is managed by Libvirt
like any regular PCI hostdev, but the guest does not have
access to it.
This adds extra options for managing PCI device binding
inside Libvirt, for example, making all the managed PCI hostdevs
declared in the domain XML to be detached from the host and bind
to the chosen driver and, at the same time, allowing just a
subset of these devices to be usable by the guest.
Next patch will use this new address type in the QEMU driver to
avoid adding unassigned devices to the QEMU launch command line.
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
There is this class of PCI devices that act like disks: NVMe.
Therefore, they are both PCI devices and disks. While we already
have <hostdev/> (and can assign a NVMe device to a domain
successfully) we don't have disk representation. There are three
problems with PCI assignment in case of a NVMe device:
1) domains with <hostdev/> can't be migrated
2) NVMe device is assigned whole, there's no way to assign only a
namespace
3) Because hypervisors see <hostdev/> they don't put block layer
on top of it - users don't get all the fancy features like
snapshots
NVMe namespaces are way of splitting one continuous NVDIMM memory
into smaller ones, effectively creating smaller NVMe-s (which can
then be partitioned, LVMed, etc.)
Because of all of this the following XML was chosen to model a
NVMe device:
<disk type='nvme' device='disk'>
<driver name='qemu' type='raw'/>
<source type='pci' managed='yes' namespace='1'>
<address domain='0x0000' bus='0x01' slot='0x00' function='0x0'/>
</source>
<target dev='vda' bus='virtio'/>
</disk>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
