This patch provides qemu support for the contents of <model> in
<controller> for the two existing PCI controller types that need it
(i.e. the two controller types that are backed by a device that must
be specified on the qemu commandline):
1) pci-bridge - sets <model> name attribute default as "pci-bridge"
2) dmi-to-pci-bridge - sets <model> name attribute default as
"i82801b11-bridge".
These both match current hardcoded practice.
The defaults are set at the end of qemuDomainAssignPCIAddresses().
This can't be done earlier because some of the options that will be
autogenerated need full PCI address info for the controller, and
because qemuDomainAssignPCIAddresses() might create extra controllers
which would need default settings added, and that hasn't yet been done
at the time the PostParse callbacks are being run.
qemuDomainAssignPCIAddresses() is still called prior to the XML being
written to disk, though, so the autogenerated defaults are persistent.
qemu capabilities bits aren't checked when the domain is defined, but
rather when the commandline is actually created (so the domain can
possibly be defined on a host that doesn't yet have support for the
given device, or a host different from the one where it will
eventually be run). When the commandline is being generated we compare
the modelName to known qemu device names implementing the given type
of controller, and check the capabilities bit for that device.
Qemu reports physical size 0 for block devices. As 15fa84acbb55ebfee6a4
changed the behavior of qemuDomainGetBlockInfo to just query the monitor
this created a regression since we didn't report the size correctly any
more.
This patch adds code to refresh the physical size of a block device by
opening it and seeking to the end and uses it both in
qemuDomainGetBlockInfo and also in qemuDomainGetStatsOneBlock that was
broken since it was introduced in this respect.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1250982
virtio-net-pci adapter is capable to use irqfd with vhost-net only in MSI-X
mode, which appears to be available only on PCIe bus, at least on ARM
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Legacy -net option works correctly only with embedded device models, which
do not require any bus specification. Therefore, we should use -device for
PCI hardware
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Here we assume that if qemu supports generic PCI host controller,
it is a part of virt machine and can be used for adding PCI devices.
In qemu this is actually a PCIe bus, so we also declare multibus
capability so that 0'th bus is specified to qemu correctly as 'pcie.0'
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This capability specifies that qemu can implement generic PCI host
controller. It is often used for virtual environments, including ARM.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Libvirt doesn't reliably know the location of the backing chain when
pre-creating images for non-shared migration. This isn't a problem for
full copy, but incremental copy requires the information.
Forbid pre-creating the image in cases where incremental migration is
required. This limitation can perhaps be lifted once libvirt will fully
support loading of backing chain information from the XML.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1249587
Rather than provide a somewhat generic error message when the API
returns false, allow the caller to supply a "report = true" option
in order to cause virReportError's to describe which of the 3 paths
that can cause failure.
Some callers don't care about what caused the failure, they just want
to have a true/false - for those, calling with report = false should
be sufficient.
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from creating qemu command with floppy device.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1180486
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PowerPC pseries based VMs do not support a floppy disk controller.
This prohibits libvirt from adding floppy disk for a PowerPC pseries VM.
Signed-off-by: Kothapally Madhu Pavan <kmp@linux.vnet.ibm.com>
The virDomainObjListRemove() function unlocks a domain that it's given
due to legacy code. And because of that code, which should be
refactored, that last virObjectUnlock() cannot be just removed. So
instead, lock it right back for qemu for now. All calls to
qemuDomainRemoveInactive() are followed by code that unlocks the domain
again, plus the domain should be locked during qemuDomainObjEndJob(), so
the right place to lock it is right after virDomainObjListRemove().
The only place where this would cause a problem is the autodestroy
callback, so we need to get another reference there and uref+unlock it
afterwards. Luckily, returning NULL from that function doesn't mean an
error, and only means that it doesn't need to be unlocked anymore.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
If cpuset is disabled or not available, it libvirt must not use it.
Mainly for actions that do not need it and can use sched_setaffinity()
or numa_membind() instead, because they will fail without good reason.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1244664
Signed-off-by: Luyao Huang <lhuang@redhat.com>
When stopping a domain on the destination host after a failed migration,
we need to avoid reseting security labels since the domain is still
running on the source host. While we were correctly doing so in some
cases, there were still some paths which did this wrong.
https://bugzilla.redhat.com/show_bug.cgi?id=1242904
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
In addition to checking the current asynchronous job
qemuMigrationJobIsActive reports an error if the current job does not
match the one we asked for. Let's just check the job directly since we
are not interested in the error in qemuProcessHandleMonitorEOF.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If destination libvirt doesn't support memory hotplug since all the
support was introduced by adding new elements the destination would
attempt to start qemu with an invalid configuration. The worse part is
that qemu might hang in such situation.
Fix this by sending a required migration feature called 'memory-hotplug'
to the destination. If the destination doesn't recognize it it will fail
the migration.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248350
Our atomic increment (virAtomicIntInc) uses (if available) gcc
__sync_add_and_fetch builtin. In qemu driver though, we'd profit more
from __sync_fetch_and_add builtin. To keep it simplistic, this patch
adjusts qemu driver initialization rather than adding a new atomic
increment macro.
Commit d506a51aeb2a7a7b0c963f760e32b94376ea7173 meant to check for
QEMU_CAPS_DRIVE_IOTUNE_MAX, but checked for QEMU_CAPS_DRIVE_IOTUNE
instead. That's clearly visible from the diff, but it got in. Because
of that, we were supplying information unknown for QEMU if it wasn't new
enough and we couldn't even properly handle the error, leading to
"Unexpected error". Also iops_size came at the same time with all the
other "_max" options, so check whether we're not setting that either if
QEMU_CAPS_DRIVE_IOTUNE_MAX is not supported.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1224053
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This loop occurs just after we've assured that all devices that
require a PCI device have been assigned and all necessary PCI
controllers have been added. It is the perfect place to add other
potentially auto-generated PCI controller attributes that are
dependent on the controller's PCI address (upcoming patch).
There is a convenient loop through all controllers at the end of the
function, but the patch to add new functionality will be cleaner if we
first rearrange that loop a bit.
Note that the loop originally was accessing info.addr.pci.bus prior to
determining that the pci part of the object was valid. This isn't
dangerous in any way, but seemed a bit ugly, so I fixed it.
This reverts commit 7b401c3bdacdf8367a0070e625d73eafb802045d.
Until libvirt is able to differentiate whether heads='1' is just a
leftover from previous libvirt or whether that's added by user on
purpose and also whether the domain was started with the support for
qxl's max_outputs, we cannot incorporate this patch into the tree
due to compatibility reasons.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1245476
We won't return the errno after commit 0d7f45ae, and
the more clearly error will be set in the code in vircgroup*.
Also We will always report error "Operation not permitted",
because the return is -1.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The scope name, even according to our docs is
"machine-$DRIVER\x2d$VMNAME.scope" virSystemdMakeScopeName would use the
resource partition name instead of "machine-" if it was specified thus
creating invalid scope paths.
This makes libvirt drop cgroups for a VM that uses custom resource
partition upon reconnecting since the detected scope name would not
match the expected name generated by virSystemdMakeScopeName.
The error is exposed by the following log entry:
debug : virCgroupValidateMachineGroup:302 : Name 'machine-qemu\x2dtestvm.scope' for controller 'cpu' does not match 'testvm', 'testvm.libvirt-qemu' or 'machine-test-qemu\x2dtestvm.scope'
for a "/machine/test" resource and "testvm" vm.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1238570
Few parts of the code looked at the current progress of and assumed that
a two phase blockjob is in the _READY state as soon as the progress
reached 100% (info.cur == info.end). In current versions of qemu this
assumption is invalid and qemu exposes a new flag 'ready' in the
query-block-jobs output that is set to true if the job is actually
finished.
This patch adds internal data handling for reading the 'ready' flag and
acting appropriately as long as the flag is present.
While this still doesn't fix the virsh client problem with two phase
block jobs and the --pivot option, it at least improves the error
message:
$ virsh blockcommit --wait --verbose vm vda --base vda[1] --active --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: internal error: unable to execute QEMU command 'block-job-complete': The active block job for device 'drive-virtio-disk0' cannot be completed
to
$ virsh blockcommit --wait --verbose VM vda --base vda[1] --active --pivot
Block commit: [100 %]error: failed to pivot job for disk vda
error: block copy still active: disk 'vda' not ready for pivot yet
If one calls update-device with information that is not updatable,
libvirt reports success even though no data were updated. The example
used in the bug linked below uses updating device with <boot order='2'/>
which, in my opinion, is a valid thing to request from user's
perspective. Mainly since we properly error out if user wants to update
such data on a network device for example.
And since there are many things that might happen (update-device on disk
basically knows just how to change removable media), check for what's
changing and moreover, since the function might be usable in other
drivers (updating only disk path is a valid possibility) let's abstract
it for any two disks.
We can't possibly check for everything since for many fields our code
does not properly differentiate between default and unspecified values.
Even though this could be changed, I don't feel like it's worth the
complexity so it's not the aim of this patch.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1007228
Allows to specify maximum number of head to QXL driver.
Actually can be a compatiblity problem as heads in the XML configuration
was set by default to '1'.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
For s390-ccw-virtio machines the default bus type is set to ccw.
Specifing an address element allows to override the default.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Adding the recently in qemu added 9pfs support for virtio-ccw.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
If we are migrating to an UNIX socket, we accept() a connection
from qemu and use that FD to set up a tunnel. However, the FD is
not closed as often as it should be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In commit 641a145d73fdc3dd9350fd57b3d3247abf101c05 I've added code that
resets the balloon memory value to full size prior to resuming the vCPUs
since the size certainly was not reduced at that point.
Since qemuProcessStart is used also in code paths with already booted
up guests (migration, save/restore) the assumption is not entirely true
since the guest might already been running before.
This patch adds a function that queries the monitor rather than using
the full size since a balloon event would not be reissued in case we are
recovering a saved migration state.
Additionally the new function is used also when reconnecting to a VM
after libvirtd restart since we might have missed a few balloon events
while libvirtd was not running.
https://bugzilla.redhat.com/show_bug.cgi?id=1232663
In one of my previous ptaches (bcd9a564) I've tried to fix the problem
that we blindly assumed strict NUMA mode for guests. This led to
several problems like us pinning a domain onto a nodeset via libnuma
among with CGroups. Once the nodeset was changed by user, well, it did
not result in desired effect. See the original commit for more info.
But, the commit I wrote had a bug: when NUMA parameters are changed on
a running domain we require domain to be strictly pinned onto a
nodeset. Due to a typo a condition was mis-evaluated.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add the sysfs_prefix argument to the call to allow for setting the
path for tests to something other than SYSFS_CPU_PATH which is a
derivative of SYSFS_SYSTEM_PATH
Use cpupath for nodeCapsInitNUMAFake and remove SYSFS_CPU_PATH
After Jirka's migration patches libvirt is listening on migration
events from qemu instead of actively polling on the monitor. There is,
however, a little regression (introduced in 6d2edb6a42d0d41). The
problem is, the current status of migration job is updated in
qemuProcessHandleMigrationStatus if and only if migration job was
started. But eventually every asynchronous job may result in
migration. Therefore, since this job is not strictly a
migration job, internal state was not updated and later checks failed:
virsh # save fedora22 /tmp/fedora22_ble.save
error: Failed to save domain fedora22 to /tmp/fedora22_ble.save
error: operation failed: domain save job: is not active
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When QEMU exits on destination during migration, the source reports
either success (if the failure happened at the very end) or unhelpful
"unexpectedly failed" error message. However, the Finish API called on
the destination may report a real error so let's use it instead of the
generic one.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
virDomainMigrateFinish* APIs were unfortunately designed to return the
pointer to the domain on destination and NULL on error. This looks OK in
normal cases but the same API is also called when we know migration
failed and thus we expect Finish to return NULL even if it actually did
all it was supposed to do without any error. The call is defined to
return nonnull domain pointer over RPC, which means returning NULL will
always result in an error being send. If this was not in fact an error,
the API itself wouldn't set anything to the thread local virError, which
makes the RPC layer come up with it's own "Library function returned
error but did not set virError" error.
This is quite confusing and also hard to detect by the caller. This
patch adds a special error code which can be used to check that Finish
successfully aborted migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
If QEMU fails during incoming migration, the domain disappears including
a possibly useful error message read from QEMU log file. Let's remember
the error in virQEMUDriver so that Finish can report more than just "no
such domain".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Libvirt's error messages do not end with a LF. However, when reading the
error from QEMU log, we would read the LF from the log and keep it in
the message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we already support the MIGRATION event, we just need to make sure
the domain condition is signalled whenever a p2p connection drops or the
domain is paused due to IO error and we can avoid waking up every 50 ms
to check whether something happened.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
We don't need to call query-migrate every 50ms when we get the current
migration state via MIGRATION event.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When QEMU supports migration events the qemuDomainJobInfo structure will
no longer be updated with migration statistics. We have to enter a job
and explicitly ask QEMU every time virDomainGetJob{Info,Stats} is
called.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Even if QEMU supports migration events it doesn't send them by default.
We have to enable them by calling migrate-set-capabilities. Let's enable
migration events everytime we can and clear QEMU_CAPS_MIGRATION_EVENT in
case migrate-set-capabilities does not support events.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This fixes
CC qemu/libvirt_driver_qemu_impl_la-qemu_conf.lo
qemu/qemu_conf.c: In function 'qemuRemoveSharedDevice':
qemu/qemu_conf.c:1384:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Some guests lock the tray and QEMU eject command will simply fail to
eject the media. But the guest OS can handle this attempt to eject the
media and can unlock the tray and open it. In this case, we should try
again to actually eject the media.
If the first attempt fails to detect a tray_open we will fail with
error, from monitor. If we receive that event, we know, that the guest
properly reacted to the eject request, unlocked the tray and opened it.
In this case, we need to run the command again to actually eject the
media from the device. The reason to call it again is, that QEMU
doesn't wait for the guest to react and report an error, that the tray
is locked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1147471
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
