Commit Graph

470 Commits

Author SHA1 Message Date
Michal Privoznik
3806480696 qemuxml2argvtest: Fake response from numad
Well, we can pretend that we've asked numad for its suggestion and let
qemu command line be built with that respect. Again, this alone has no
big value, but see later commits which build on the top of this.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2015-02-17 08:38:19 +01:00
Martin Kletzander
8680ea9749 docs, schema, conf: Add support for setting scheduler parameters of guest threads
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-11 17:30:06 +01:00
Erik Skultety
357f0072ca conf: forbid seclabel duplicates for domain devices
Parser checks for per-domain seclabel duplicates, so it would be nice if
it checked for per-device seclabel duplicates the same way

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485
2015-02-11 09:45:22 +01:00
Martin Kletzander
3f9f4aa84f conf: disallow invalid values for video attributes
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1190956

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-02-10 09:05:36 +01:00
Daniel P. Berrange
b38da58423 Make tests independant of system page size
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
2015-02-02 20:27:43 +00:00
Daniel P. Berrange
f7afeddce9 qemu: report TAP device indexes to systemd
Record the index of each TAP device created and report them to
systemd, so they show up in machinectl status for the VM.
2015-01-27 13:57:02 +00:00
Daniel P. Berrange
55ea7be7d9 Removing probing of secondary drivers
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.

For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.

This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants

struct _virConnectDriver {
    virHypervisorDriverPtr hypervisorDriver;
    virInterfaceDriverPtr interfaceDriver;
    virNetworkDriverPtr networkDriver;
    virNodeDeviceDriverPtr nodeDeviceDriver;
    virNWFilterDriverPtr nwfilterDriver;
    virSecretDriverPtr secretDriver;
    virStorageDriverPtr storageDriver;
};

Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2015-01-27 12:02:04 +00:00
Martin Kletzander
6514c04c18 qemu: Add support for enabling/disabling PMU
This is used as a boolean parameter for the '-cpu' option.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178853

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-16 13:43:46 +01:00
Erik Skultety
78f911d7d0 Add XML test for too many PCI devices on default PCI bus 2015-01-16 10:59:26 +01:00
Daniel P. Berrange
0ecd685109 Give virDomainDef parser & formatter their own flags
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.

This is seriously confusing & error prone for a number of
reasons:

 - VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
   VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
   formatting operation
 - Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
   to parse or to format, but not both.

This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.

The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
2015-01-13 16:26:12 +00:00
Martin Kletzander
adff345e1e qemu: Allow enabling/disabling features with host-passthrough
QEMU supports feature specification with -cpu host and we just skip
using that.  Since QEMU developers themselves would like to use this
feature, this patch modifies the code to work.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178850

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2015-01-13 08:51:01 +01:00
Michal Privoznik
311b4a677f qemu: Allow system pages to <memoryBacking/>
https://bugzilla.redhat.com/show_bug.cgi?id=1173507

It occurred to me that OpenStack uses the following XML when not using
regular huge pages:

  <memoryBacking>
    <hugepages>
      <page size='4' unit='KiB'/>
    </hugepages>
  </memoryBacking>

However, since we are expecting to see huge pages only, we fail to
startup the domain with following error:

  libvirtError: internal error: Unable to find any usable hugetlbfs
  mount for 4 KiB

While regular system pages are not huge pages technically, our code is
prepared for that and if it helps OpenStack (or other management
applications) we should cope with that.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-12-15 13:36:47 +01:00
Ján Tomko
15abebdecb Ignore CPU features without a model for host-passthrough
This fixes reverting to snapshots created by older libvirt
and allows libvirt not to lose track of a domain that
has this in its live status XML (such as a domain
restored from managedsave)

https://bugzilla.redhat.com/show_bug.cgi?id=1030793
https://bugzilla.redhat.com/show_bug.cgi?id=1151885
2014-12-11 12:03:36 +01:00
Pavel Hrdina
742d49fa17 qemu-command: introduce new vgamem attribute for QXL video device
Add attribute to set vgamem_mb parameter of QXL device for QEMU. This
value sets the size of VGA framebuffer for QXL device. Default value in
QEMU is 8MB so reuse it also in libvirt to not break things.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:20:13 +01:00
Pavel Hrdina
24c6ca860e qemu-command: use vram attribute for all video devices
So far we didn't have any option to set video memory size for qemu video
devices. There was only the vram (ram for QXL) attribute but it was valid
only for the QXL video device.

To provide this feature to users QEMU has a dedicated device attribute
called 'vgamem_mb' to set the video memory size. We will use the 'vram'
attribute for setting video memory size for other QEMU video devices.

For the cirrus device we will ignore the vram value because it has
hardcoded video size in QEMU.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1076098

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-11-24 22:18:18 +01:00
Peter Krempa
24c25a68c2 conf: Add channel state for virtio channels to the XML
To track state of virtio channels this patch adds a new output-only
attribute called 'state' to the <target> element of virtio channels.

This will be later populated with the guest state of the channel.
2014-11-21 11:00:11 +01:00
John Ferlan
5c08b12521 qemu: Add tests for new blkdeviotune arguments
The recent commit to add support for block_set_io_throttle parameters
from version 1.7 of qemu did not add any tests - this adds the tests

Signed-off-by: John Ferlan <jferlan@redhat.com>
2014-11-14 12:03:52 -05:00
Michal Privoznik
8d659b177f qemuxml2argvtest: Run some test only on Linux
As I was reviewing bhyve commits, I've noticed qemuxml2argvtest
failing for some test cases. This is not bug in qemu driver code
rather than being unable to load qemuxml2argvmock on non-Linux
platforms. For instance:

318) QEMU XML-2-ARGV numatune-memnode
... libvirt:  error : internal error: NUMA node 0 is unavailable
FAILED

Rather than disabling qemuxml2argvtest on BSD (we do compile qemu
driver there) disable only those test cases which require mocking.
To achieve that goal new DO_TEST_LINUX() macro is introduced which
invokes the test case on Linux only and consume arguments on other
systems.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-11-12 16:57:19 +01:00
Prerna Saxena
12c381114c Test: Add a testcase for PowerPC compat mode cpu specification.
This introduces a testcase for PowerPC compat mode cpu specification.

Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
2014-11-07 09:20:40 +01:00
Boris Fiuczynski
b84be34f43 qemu: Allow use of iothreads for virtio ccw disk definitions
Extending the iothread disk support from pci to pci and ccw.

Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
2014-11-06 15:13:55 +01:00
Chen Fan
902864184e numatune: add check for numatune nodeset range
There was no check for 'nodeset' attribute in numatune-related
elements.  This patch adds validation that any nodeset specified does
not exceed maximum host node.

Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
2014-11-04 07:03:36 +01:00
Martin Kletzander
11a48758a7 qemu: make advice from numad available when building commandline
Particularly in qemuBuildNumaArgStr(), there was a need for the advice
due to memory backing, which needs to know the nodeset it will be pinned
to.  With newer qemu this caused the following error when starting
domain:

  error: internal error: Advice from numad is needed in case of
  automatic numa placement

even when starting perfectly valid domain, e.g.:

  ...
  <vcpu placement='auto'>4</vcpu>
  <numatune>
    <memory mode='strict' placement='auto'/>
  </numatune>
  <cpu>
    <numa>
      <cell id='0' cpus='0' memory='524288'/>
      <cell id='1' cpus='1' memory='524288'/>
    </numa>
  </cpu>
  ...

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138545

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-11-03 16:43:22 +01:00
Maxime Leroy
e80be99ffa tests: fix incorrect caps for shmem-invalid-size, shmem-small-size
VIR_TEST_DEBUG=2 ./qemuxml2argvtest generates the following output:

409) QEMU XML-2-ARGV shmem-invalid-size
... Got expected error: unsupported configuration: ivshmem device is not \
	 supported with this QEMU binary
OK
410) QEMU XML-2-ARGV shmem-small-size
... Got expected error: unsupported configuration: ivshmem device is not \
supported with this QEMU binary
OK

We should have:

409) QEMU XML-2-ARGV shmem-invalid-size
... Got expected error: XML error: shmem size must be a power of two
OK
410) QEMU XML-2-ARGV shmem-small-size
... Got expected error: XML error: shmem size must be at least 1 MiB
OK

This commit fixes the issue by providing QEMU_CAPS_DEVICE_IVSHMEM caps
for shmem-invalid-size, shmem-small-size test.

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
2014-10-20 09:01:27 +02:00
Martin Kletzander
b90a9a6374 qemu: Build command line for ivshmem device
This patch implements support for the ivshmem device in QEMU.

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-10-03 22:43:09 +02:00
Martin Kletzander
540a84ec89 docs, conf, schema: add support for shmem device
This patch adds parsing/formatting code as well as documentation for
shared memory devices.  This will currently be only accessible in QEMU
using it's ivshmem device, but is designed as generic as possible to
allow future expansion for other hypervisors.

In the devices section in the domain XML users may specify:

- For shmem device using a server:

 <shmem name='shmem0'>
   <server path='/tmp/socket-ivshmem0'/>
   <size unit='M'>32</size>
   <msi vectors='32' ioeventfd='on'/>
 </shmem>

- For ivshmem device not using an ivshmem server:

 <shmem name='shmem1'>
   <size unit='M'>32</size>
 </shmem>

Most of the configuration is made optional so it also allows
specifications like:

 <shmem name='shmem1/>
 <shmem name='shmem2'>
   <server/>
 </shmem>

Signed-off-by: Maxime Leroy <maxime.leroy@6wind.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-10-03 22:43:08 +02:00
Cole Robinson
445a09bdc9 qemu: Don't compare CPU against host for TCG
Right now when building the qemu command line, we try to do various
unconditional validations of the guest CPU against the host CPU. However
this checks are overly applied. The only time we should use the checks
are:

- The user requests host-model/host-passthrough, or

- When KVM is requsted. CPU features requested in TCG mode are always
  emulated by qemu and are independent of the host CPU, so no host CPU
  checks should be performed.

Right now if trying to specify a CPU for arm on an x86 host, it attempts
to do non-sensical validation and falls over.

Switch all the test cases that were intending to test CPU validation to
use KVM, so they continue to test the intended code.

Amend some aarch64 XML tests with a CPU model, to ensure things work
correctly.
2014-10-03 11:30:29 -04:00
Jincheng Miao
e029088802 conf: report error in virCPUDefParseXML
When detected invalid 'memAccess', virCPUDefParseXML should report error.

Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1146334

Signed-off-by: Jincheng Miao <jmiao@redhat.com>
2014-09-26 16:03:14 +02:00
Ján Tomko
2d79e1752a qemu: wire up virtio-net segment offloading options
Format the segment offloading options specified by
<driver>
  <host .../>
  <guest .../>
</driver>
on virtio-net command line.
2014-09-24 16:16:45 +02:00
Pavel Hrdina
da7799d879 Move the FIPS detection from capabilities
We are not detecting the presence of FIPS from QEMU, but from procfs and
that means it's not QEMU capability. It was decided that we will pass
this flag to QEMU even if it's not supported by old QEMU binaries.

This patch also reverts changes done by commit a21cfb0f to
qemucapabilitestest and implements a new test case in qemuxml2argvtest.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1135431

Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2014-09-19 09:08:23 +02:00
Michal Privoznik
281f70013e qemu: Honor hugepages for UMA domains
https://bugzilla.redhat.com/show_bug.cgi?id=1135396

There are two ways how to tell qemu to use huge pages. The first one
is suitable for domains with NUMA nodes: the path to hugetlbfs mount
is appended to NUMA node definition on the command line. The second
one is suitable for UMA domains: here there's this global '-mem-path'
argument that accepts path to the hugetlbfs mount point. However, the
latter case was not used for all the cases that it should be. For
instance:

  <memoryBacking>
    <hugepages>
      <page size='2048' unit='KiB' nodeset='0'/>
    </hugepages>
  </memoryBacking>

didn't trigger the '-mem-path' so the huge pages - despite being
configured - were not used at all.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-17 18:33:33 +02:00
Michal Privoznik
ec982f6d92 conf: Disallow nonexistent NUMA nodes for hugepages
As of 136ad4974 it is possible to specify different huge pages per
guest NUMA node. However, there's no check if nodeset specified in
./hugepages/page contains only those guest NUMA nodes that exist.
In other words with current code it is possible to define meaningless
combination:

  <memoryBacking>
    <hugepages>
      <page size='1048576' unit='KiB' nodeset='0,2-3'/>
      <page size='2048' unit='KiB' nodeset='1,4'/>
    </hugepages>
  </memoryBacking>
  <vcpu placement='static'>4</vcpu>
  <cpu>
    <numa>
      <cell id='0' cpus='0' memory='1048576'/>
      <cell id='1' cpus='1' memory='1048576'/>
      <cell id='2' cpus='2' memory='1048576'/>
      <cell id='3' cpus='3' memory='1048576'/>
    </numa>
  </cpu>

Notice the node 4 in <hugepages/>?

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-09-17 18:33:33 +02:00
Martin Kletzander
c7abf2c856 qemu: add support for shared memory mapping
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-09-17 16:10:26 +02:00
Erik Skultety
e6fc664618 network: check negative values in bridge queues
We already are checking for negative value, reporting an error, but
using wrong function and the check only succeeds when a value that
cannot be converted to number successfully is encountered. This patch
provides just a minor change in call of the right version
of function virStrToLong.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138539
2014-09-16 10:34:37 +02:00
Michal Privoznik
542899168c qemu: Implement extended loader and nvram
QEMU now supports UEFI with the following command line:

  -drive file=/usr/share/OVMF/OVMF_CODE.fd,if=pflash,format=raw,unit=0,readonly=on \
  -drive file=/usr/share/OVMF/OVMF_VARS.fd,if=pflash,format=raw,unit=1 \

where the first line reflects <loader> and the second one <nvram>.
Moreover, these two lines obsolete the -bios argument.

Note that UEFI is unusable without ACPI. This is handled properly now.
Among with this extension, the variable file is expected to be
writable and hence we need security drivers to label it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
2014-09-10 09:38:07 +02:00
John Ferlan
ef8da2ad11 qemu: Allow use of iothreads for disk definitions
For virtio-blk-pci disks with the disk iothread attribute that are
running the correct emulator, add the "iothread=iothread#" to the
-device command line in order to enable iothreads for the disk as
long as the command is available, the disk iothread value provided is
valid, and is supported for the disk device being added
2014-08-28 16:27:54 -04:00
John Ferlan
72edaae78f qemu: Add support for iothreads
Add a new capability to ensure the iothreads feature exists for the qemu
emulator being run - requires the "query-iothreads" QMP command. Using the
domain XML add correspoding command argument in order to generate the
threads. The iothreads will use a name space "iothread#" where, the
future patch to add support for using an iothread to a disk definition to
merely define which of the available threads to use.

Add tests to ensure the xml/argv processing is correct.  Note that no
change was made to qemuargv2xmltest.c as processing the -object element
would require knowing more than just iothreads.
2014-08-28 16:27:53 -04:00
Alex Williamson
d071164272 Add new 'kvm' domain feature and ability to hide KVM signature
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load.  Domain XML syntax is as follows:

<domain type='kvm>
  ...
  <features>
    ...
    <kvm>
      <hidden state='on'/>
    </kvm>
  </features>
  ...

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2014-08-26 10:41:24 +02:00
Martin Kletzander
adfdb8d5bd qemu: add support for splash-timeout
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1021703

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:11:41 +02:00
Martin Kletzander
43b8123d39 docs, conf: add support for bootmenu timeout
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-08-25 14:10:54 +02:00
Erik Skultety
b9ff7393bc numatune: setting --mode does not work well
When trying to set numatune mode directly using virsh numatune command,
correct error is raised, however numatune structure was not deallocated,
thus resulting in creating an empty numatune element in the guest XML,
if none was present before. Running the same command aftewards results
in a successful change with broken XML structure. Patch fixes the
deallocation problem as well as checking for invalid attribute
combination VIR_DOMAIN_NUMATUNE_PLACEMENT_AUTO + a nonempty nodeset.

Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1129998
2014-08-22 16:34:23 +02:00
Roman Bogorodskiy
8c170c9fe6 storage: make disk source pool translation generic
Currently, qemu driver uses qemuTranslateDiskSourcePool()
to translate disk volume information. This function is
general enough and could be used for other drivers as well,
so move it to conf/domain_conf.c along with its helpers.

 - qemuTranslateDiskSourcePool: move to storage/storage_driver.c
   and rename to virStorageTranslateDiskSourcePool,
 - qemuAddISCSIPoolSourceHost: move to storage/storage_driver.c
   and rename to virStorageAddISCSIPoolSourceHost,
 - qemuTranslateDiskSourcePoolAuth: move to storage/storage_driver.c
   and rename to virStorageTranslateDiskSourcePoolAuth,
 - Update users of qemuTranslateDiskSourcePool to use a
   new name.
2014-08-19 20:50:12 +04:00
Erik Skultety
983f5a5076 numatune: Fix parsing of empty nodeset (0,^0)
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1121837
2014-08-12 17:04:31 +02:00
Peter Krempa
e260a0e60a conf: Add USB sound card support and implement it for qemu 2014-08-08 14:34:20 +02:00
John Ferlan
54ac483e68 hostdev: Add iSCSI hostdev XML
Introduce a new structure to handle an iSCSI host device based on the
existing virDomainHostdevSubsysSCSI by adding a "protocol='iscsi'" to
the <source/> element. The existing scsi_host subsystem RNG was modified
to read an optional "protocol='adapter'", although it won't be written
out nor is it documented as an option (by choice).

The new hostdev structure mimics the existing <disk/> element for an
iSCSI device (network) device. New XML is:

  <hostdev mode='subsystem' type='scsi' managed='yes'>
    <source protocol='iscsi' name='iqn.1992-01.com.example'>
      <host name='example.org' port='3260'/>
      <auth username='myname'>
        <secret type='iscsi' usage='mycluster_myname'/>
      </auth>
    </source>
    <address type='drive' controller='0' bus='0' target='2' unit='5'/>
  </hostdev>

The controller element will mimic the existing scsi_host code insomuch
as when 'lsi' and 'virtio-scsi' are used.
2014-08-07 15:07:56 -04:00
Michal Privoznik
3517e1b2f2 qemu: Implement ./hugepages/page/[@size, @unit, @nodeset]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-29 12:14:52 +01:00
Michal Privoznik
725a211fc0 qemu: Utilize virFileFindHugeTLBFS
Use better detection of hugetlbfs mount points. Yes, there can be
multiple mount points each serving different huge page size.

Since we already have ability to override the mount point in the
qemu.conf file, this crazy backward compatibility code is brought in.
Now we allow multiple mount points, so the "hugetlbfs_mount" option
must take an list of strings (mount points). But previously, it was
just a string, so we must accept both types now.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-29 11:58:35 +01:00
Peter Krempa
7214d5da28 test: qemu: Add tests for multiple virtio-rng devices 2014-07-25 09:34:53 +02:00
Martin Kletzander
1c19d3e072 qemu: pass numa node binding preferences to qemu
Currently, we only bind the whole QEMU domain to memory nodes
specified in nodemask altogether.  That, however, doesn't make much
sense when one wants to control from where the memory for particular
guest nodes should be allocated.  QEMU allows us to do that by
specifying 'host-nodes' parameter for the 'memory-backend-ram' object,
so let's use that.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:46 +02:00
Martin Kletzander
001b9dc1dc qemu: enable disjoint numa cpu ranges
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:46 +02:00
Martin Kletzander
a05c01521c conf, schema: add support for memnode elements
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Martin Kletzander
992000e6d8 conf, schema: add 'id' field for cells
In XML format, by definition, order of fields should not matter, so
order of parsing the elements doesn't affect the end result.  When
specifying guest NUMA cells, we depend only on the order of the 'cell'
elements.  With this patch all older domain XMLs are parsed as before,
but with the 'id' attribute they are parsed and formatted according to
that field.  This will be useful when we have tuning settings for
particular guest NUMA node.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-07-16 20:15:45 +02:00
Michele Paolino
a14abd463a support for QEMU vhost-user
This patch adds support for the QEMU vhost-user feature to libvirt.
vhost-user enables the communication between a QEMU virtual machine
and other userspace process using the Virtio transport protocol.
It uses a char dev (e.g. Unix socket) for the control plane,
while the data plane based on shared memory.

The XML looks like:

<interface type='vhostuser'>
    <mac address='52:54:00:3b:83:1a'/>
    <source type='unix' path='/tmp/vhost.sock' mode='server'/>
    <model type='virtio'/>
</interface>

Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-16 18:44:57 +02:00
Michal Privoznik
d1abf819cf conf: Don't allow multiple seclabels for same model
https://bugzilla.redhat.com/show_bug.cgi?id=1066894

With current code it's possible to have for instance:

virsh dumpxml mydomain | grep seclabel
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>
  <seclabel type='dynamic' model='selinux' relabel='yes'/>

what doesn't make any sense. We should reject the XML in the config
parsing phase.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-07-11 10:36:08 +02:00
Mike Perez
d950494129 qemu: Add cmd_per_lun, max_sectors to virtio-scsi
This introduces two new attributes "cmd_per_lun" and "max_sectors" same
with the names QEMU uses for virtio-scsi. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' cmd_per_lun='50'
max_sectors='512'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,cmd_per_lun=50,max_sectors=512,
bus=pci.0,addr=0x3

Signed-off-by: Mike Perez <thingee@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-07-02 09:43:17 +02:00
Ján Tomko
96f6275513 Add test for type none model dac seclabel 2014-06-27 07:00:51 +02:00
Laine Stump
ef01622607 qemu: parse -device virtio-balloon
There are no options to parse here other than the name of the device,
and all three possible device names have the same prefix
("virtio-balloon" with "-ccw", "-pci", or "-device" appended), so the
code is fairly simple. It has been implemented such that it will be
easier to add handling for other -device entries that aren't otherwise
recognized - just add another "else if (STRPREFIX(opts, ....)" clause.

qemuParseCommandLineString() previously would always add a <memballoon
model='virtio'/> to every result (the comments erroneously say that it
is adding a <memballoon model='none'/>) This has been changed to add
model='none', and 84 test case xml's updated accordingly (so that
qemuxml2argvtest won't fail).

Now that the memballoon device is properly parsed, we can safely add a
test for properly ignoring -nodefconfig and -nodefaults. Rather than
adding an entire new test case for this (and memballoon), we just
randomly pick the clock-utc test and modify it slightly to fulfill the
purpose.
2014-06-23 16:34:53 +03:00
Peter Krempa
810eea719c uuid: Fix coverity warning of unchecked return value
Coverity checks for patterns of handling return values of functions.
Some recent addition must have tripped a threshold where coverity now
complains that we usually check the return value of virUUIDGenerate but
don't do it in one place. Add a check to make coverity happy.
2014-06-17 10:40:20 +02:00
Olivia Yin
fd0f22ed41 qemu: Fix specifying char devs for PPC
QEMU ppce500 board uses the legacy -serial option.

Other PPC boards don't give any way to explicitly wire in a -chardev
except pseries which uses -device spapr-vty with -chardev.

Add test case for -serial option for ppce500

Signed-off-by: Olivia Yin <Hong-Hua.Yin@freescale.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-05-27 08:48:57 +02:00
Ján Tomko
f3be5f0c50 Add support for timestamping QEMU logs
QEMU commit 5e2ac51 added a boolean '-msg timestamp=[on|off]'
option, which can enable timestamps on errors:
$ qemu-system-x86_64 -msg timestamp=on zghhdorf
2014-04-09T13:25:46.779484Z qemu-system-x86_64: -msg timestamp=on: could
not open disk image zghhdorf: Could not open 'zghhdorf': No such file or
directory

Enable this timestamp if the QEMU binary supports it.

Add a 'log_timestamp' option to qemu.conf for disabling this behavior.
2014-05-07 10:27:50 +02:00
Laine Stump
1e947cf7d8 qemu: specify domain in host-side PCI addresses when needed/supported
This uses the new QEMU_CAPS_HOST_PCI_MULTIDOMAIN capability when
present, for -devivce pci-assign, -device vfio-pci, and -pcidevice.

While creating tests for this new functionality, I noticed that the
xmls for two existing tests had erroneously specified an
until-now-ignored domain="0x0002", so I corrected those two tests, and
also added two failure tests to be sure that we alert users who
attempt to use a non-zero domain with a qemu that doesn't support it.
2014-05-06 14:34:56 +03:00
Guido Günther
3cee4c05b7 qemuxml2argvtest: Don't use privileged mode upfront
When building packages in a clean chroot the QEMU_USER and QEMU_GROUP
don't exist making VirQemuDriverConfigNew fail with privileged=true.

Avoid that by not requiring privileged mode upfront but setting it later
so we skip the user/group existence check.

This solution was suggested by Daniel P. Berrange and tested by Martin
Kletzander.
2014-05-03 16:23:59 +02:00
Daniel P. Berrange
dd477238bc Use virFileFindResource to locate CPU map XML
Replace use of cpuMapOverride with virFileFindResource
to locate CPU map from build dir.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-04-25 11:59:46 +01:00
Eric Blake
8fb446754d conf: fix omission of <driver> in domain dumpxml
I noticed that depending on the <driver> attributes the user passed
in, the output may omit the <driver> element altogether.  For example,
the rerror_policy has had this problem since commit 4bb4109 in Oct
2011.  But in adding testsuite coverage to expose it, I found another
problem: the C code is just fine without a driver name, but the
XML validator required either a name or a cache mode.

* src/conf/domain_conf.c (virDomainDiskDefFormat): Update
conditional.
* docs/schemas/domaincommon.rng (diskDriver): Simplify.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.xml:
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-copy-on-read.args:
New files.
* tests/qemuxml2argvdata/qemuxml2argv-disk-drive-discard.xml:
Enhance test.
* tests/qemuxml2xmloutdata/qemuxml2xmlout-disk-drive-discard.xml:
Likewise.
* tests/qemuxml2argvtest.c (mymain): New test.
* tests/qemuxml2xmltest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
2014-04-16 10:49:07 +02:00
Guido Günther
ff32ac06f5 tests: Don't crash when creating the config object fails
As observed when building in a chroot and QEMU_USER doesn't exist
2014-04-08 08:42:16 +02:00
Ján Tomko
bdffab0d5c Treat zero cpu shares as a valid value
Currently, <cputune><shares>0</shares></cputune> is treated
as if it were not specified.

Treat is as a valid value if it was explicitly specified
and write it to the cgroups.
2014-03-26 10:10:02 +01:00
Ján Tomko
2dcdb7f654 Indent top-level labels by one space in tests/ 2014-03-25 14:58:41 +01:00
Martin Kletzander
cc9c62fef9 Require spaces around equality comparisons
Commit a1cbe4b5 added a check for spaces around assignments and this
patch extends it to checks for spaces around '=='.  One exception is
virAssertCmpInt where comma after '==' is acceptable (since it is a
macro and '==' is its argument).

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-18 11:29:44 +01:00
Cole Robinson
e8400564c8 qemu: XMLToNative: Don't show -S
-S causes qemu to start in the paused state. Since XML2Native is intended
to generate something that users can run directly, this will trip them up.
2014-03-14 17:33:29 -04:00
Martin Kletzander
29151830e4 tests: Create privileged driver config in qemuxml2argvtest
This is actually a proper setting since we're not checking
session-mode related XMLs.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-03-04 08:56:59 +01:00
Daniel P. Berrange
590029f672 Introduce new OOM testing support
The previous OOM testing support would re-run the entire "main"
method each iteration, failing a different malloc each time.
When a test suite has 'n' allocations, the number of repeats
requires is  (n * (n + 1) ) / 2.  This gets very large, very
quickly.

This new OOM testing support instead integrates at the
virtTestRun level, so each individual test case gets repeated,
instead of the entire test suite. This means the values of
'n' are orders of magnitude smaller.

The simple usage is

   $ VIR_TEST_OOM=1 ./qemuxml2argvtest
   ...
   29) QEMU XML-2-ARGV clock-utc                                         ... OK
       Test OOM for nalloc=36 .................................... OK
   30) QEMU XML-2-ARGV clock-localtime                                   ... OK
       Test OOM for nalloc=36 .................................... OK
   31) QEMU XML-2-ARGV clock-france                                      ... OK
       Test OOM for nalloc=38 ...................................... OK
   ...

the second lines reports how many mallocs have to be failed, and thus
how many repeats of the test will be run.

If it crashes, then running under valgrind will often show the problem

  $ VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When debugging problems it is also helpful to select an individual
test case

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1 ../run valgrind ./qemuxml2argvtest

When things get really tricky, it is possible to request that just
specific allocs are failed. eg to fail allocs 5 -> 12, use

  $ VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-12 ../run valgrind ./qemuxml2argvtest

In the worse case, you might want to know the stack trace of the
alloc which was failed then VIR_TEST_OOM_TRACE can be set. If it
is set to 1 then it will only print if it thinks a mistake happened.
This is often not reliable, so setting it to 2 will make it print
the stack trace for every alloc that is failed.

  $ VIR_TEST_OOM_TRACE=2 VIR_TEST_RANGE=30 VIR_TEST_OOM=1:5-5 ../run valgrind ./qemuxml2argvtest
  30) QEMU XML-2-ARGV clock-localtime                                   ... OK
      Test OOM for nalloc=36 !virAllocN
  /home/berrange/src/virt/libvirt/src/util/viralloc.c:180
  virHashCreateFull
  /home/berrange/src/virt/libvirt/src/util/virhash.c:144
  virDomainDefParseXML
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:11745
  virDomainDefParseNode
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12646
  virDomainDefParse
  /home/berrange/src/virt/libvirt/src/conf/domain_conf.c:12590
  testCompareXMLToArgvFiles
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:106
  virtTestRun
  /home/berrange/src/virt/libvirt/tests/testutils.c:250
  mymain
  /home/berrange/src/virt/libvirt/tests/qemuxml2argvtest.c:418 (discriminator 2)
  virtTestMain
  /home/berrange/src/virt/libvirt/tests/testutils.c:750
  ??
  ??:0
  _start
  ??:?
   FAILED

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-02-20 15:36:10 +00:00
Oleg Strikov
41b9b71877 qemu: Use virtio network device for aarch64/virt
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.

Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
2014-02-19 10:46:10 -05:00
Li Zhang
78730478aa qemu: format qemu command line for USB keyboard
Format qemu command line for USB keyboard
and add test cases for it.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-02-19 09:16:31 +01:00
Martin Kletzander
d27e6bc40f qemu: introduce spiceport chardev backend
Add a new backend for any character device.  This backend uses channel
in spice connection.  This channel is similar to spicevmc, but
all-purpose in contrast to spicevmc.

Apart from spicevmc, spiceport-backed chardev will not be formatted
into the command-line if there is no spice to use (with test for that
as well).  For this I moved the def->graphics counting to the start
of the function so its results can be used in rest of the code even in
the future.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-02-11 13:43:55 +01:00
Peter Krempa
600bca592b qemu: hyperv: Add support for timer enlightenments
Add a new <timer> for the HyperV reference time counter enlightenment
and the iTSC reference page for Windows guests.

This feature provides a paravirtual approach to track timer events for
the guest (similar to kvmclock) with the option to use real hardware
clock on systems with a iTSC with compensation across various hosts.
2014-02-10 11:30:10 +01:00
Peter Krempa
bbd392ff86 schema: Fix guest timer specification schema according to the docs
According to the documentation describing various tunables for domain
timers not all the fields are supported by all the driver types. Express
these in the RNG:

- rtc, platform: Only these support the "track" attribute.
- tsc: only one to support "frequency" and "mode" attributes
- hpet, pit: tickpolicy/catchup attribute/element
- kvmclock: no extra attributes are supported

Additionally the attributes of the <catchup> element for
tickpolicy='catchup' are optional according to the parsing code. Express
this in the XML and fix a spurious space added while formatting the
<catchup> element and add tests for it.
2014-02-10 11:09:14 +01:00
Michal Privoznik
c5d09fbdd1 qemuxml2argvtest: Set timezone
With my recent work on the test, both time() and localtime() are used.
While mocking the former one, we get predictable result for UTC. But
since the latter function uses timezone to get local time, the result of
localtime() is not so predictive. Therefore, we must set the TZ variable
at the beginning of the test. To be able to catch some things that work
just by a blind chance, I'm choosing a virtual timezone that (hopefully)
no libvirt developer resides in.
2014-02-06 15:15:10 +01:00
Michal Privoznik
e505db0f6c qemuxml2argvtest: Test localtime clock basis
When trying to introduce a test for previous patch, I've
noticed that the command line is constructed using current
time. This won't work in our test suite (unless you guys
wants to set a specific time prior to each test run :) ).
Therefore we need to mock calls to time(2) to return the
same value every time it's called.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2014-02-06 08:22:22 +01:00
Francesco Romani
08d07e5fd8 spice: expose the QEMU disable file transfer option
spice-server offers an API to disable file transfer messages
on the agent channel between the client and the guest.
This is supported in qemu through the disable-agent-file-xfer option.

This patch exposes this option to libvirt.
Adds a new element 'filetransfer', with one property,
'enable', which accepts a boolean.
Default is enabled, for backward compatibility.

Depends on the capability exported in the first patch of the series.

Signed-off-by: Francesco Romani <fromani@redhat.com>
2014-01-21 11:35:41 +01:00
Daniel P. Berrange
53a699a07b Exercise the ABI stability check code in test suite
Any test suite which involves a virDomainDefPtr should
call virDomainDefCheckABIStability with itself just as
a basic sanity check that the identity-comparison always
succeeds. This would have caught the recent NULL pointer
access crash.

Make sure we cope with def->name being NULL since the
VMWare config parser produces NULL names.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2014-01-10 20:32:48 +00:00
Pranavkumar Sawargaonkar
27e32e0f3d AArch64: Porting of armv7l conditons to run qemu for aarch64.
AArch64 qemu has similar behavior as armv7l, like use of mmio etc.
This patch adds similar bypass checks what we have for armv7l to aarch64.
E.g. we are enabling mmio transport for Nicdev.
Making addDefaultUSB and addDefaultMemballoon to false etc.

V3:
- Adding missing domain rng schema for aarcg64 and test case in
  testutilsqemu.c which was causing test suite failure
  while running make check.

V2:
- Added testcase to qemuxml2argvtest as suggested
  during review comments of V1.

V1:
- Initial patch.

Signed-off-by: Anup Patel <anup.patel@linaro.org>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org>
2014-01-06 11:02:24 -05:00
Ján Tomko
ec128e69f1 Fix explicit usage of default video PCI slots
Do not leave the PCI address of the primary video card set
to the legacy default (0000:00:02.0) if we're doing two-pass
allocation.

Since QEMU 1.6 (QEMU_CAPS_VIDEO_PRIMARY) we allow the primary
video card to be on other slots than 0000:00:02.0 (as we use
-device instead of -vga).

However we fail to assign it an address if:
* another device explicitly uses 0000:00:02.0 and
* the primary video device has no address specified

On the first pass, we have set the address to default, then checked
if it's available, leaving it set even if it wasn't. This address
got picked up by the second pass, resulting in a conflict:

XML error: Attempted double use of PCI slot 0000:00:02.0
(may need "multifunction='on'" for device on function 0)

Also fix the test that was supposed to catch this.
2014-01-06 09:31:32 +01:00
Hu Tao
4d18758df8 qemu: add support for -device pvpanic
Map the new <panic> device in XML to the '-device pvpanic' command
line of qemu.  Clients can then couple the <panic> device and the
<on_crash> directive to control behavior when the guest reports
a panic to qemu.

Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2013-12-13 05:53:33 -07:00
Martin Kletzander
ea130e3bf6 conf: don't format memtune with unlimited values
When changing memtune limits to unlimited with AFFECT_CONFIG, the
values in virDomainDef are set to PARAM_UNLIMITED, which causes the
whole <memtune> to be formatted.  This can be changed in all drivers,
but it also makes sense to use the default (0) as another value for
"unlimited", since zero memory limit makes no sense.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2013-12-10 09:11:26 +01:00
Laine Stump
96fddee322 qemu: add "-boot strict" to commandline whenever possible
This resolves:

  https://bugzilla.redhat.com/show_bug.cgi?id=888635

(which was already closed as CANTFIX because the qemu "-boot strict"
commandline option wasn't available at the time).

Problem: you couldn't have a domain that used PXE to boot, but also
had an un-bootable disk device *even if that disk wasn't listed in the
boot order*, because if PXE timed out (e.g. due to the bridge
forwarding delay), the BIOS would move on to the next target, which
would be the unbootable disk device (again - even though it wasn't
given a boot order), and get stuck at a "BOOT DISK FAILURE, PRESS ANY
KEY" message until a user intervened.

The solution available since sometime around QEMU 1.5, is to add
"-boot strict=on" to *every* qemu command. When this is done, if any
devices have a boot order specified, then QEMU will *only* attempt to
boot from those devices that have an explicit boot order, ignoring the
rest.
2013-12-03 11:58:26 +02:00
Peter Krempa
436fa772fb tests: Fix comment for fake storage pool driver
Commit bae124e40f was accidentaly pushed
without review feedback worked in. Fix it up.
2013-12-02 13:36:09 +01:00
Peter Krempa
7e831969c0 qemuxml2argv: Add test for disk type='volume' with iSCSI pools
Tweak the existing file so that it can be tested for command line
corectness.
2013-12-02 10:32:09 +01:00
Peter Krempa
9f9906727b qemuxml2argv: Add test to verify correct usage of disk type="volume"
Tweak the existing file to test command line generator too.
2013-12-02 10:32:09 +01:00
Peter Krempa
bae124e40f test: Implement fake storage pool driver in qemuxml2argv test
To support testing of "volume" disk backing, we need to implement a few
disk driver backend functions.

The fake storage driver uses files in storagepoolxml2xmlout/POOLNAME.xml
as XML files for pool definitions and volume names are in format
"VOL_TYPE+VOL_PATH". By default type "block" is assumed (for iSCSI test
compatibility).

The choice of this approach along with implemented functions was made so
that <disk type='volume'> can be tested in the xml2argv test.
2013-12-02 10:32:09 +01:00
Eric Blake
0aa873d741 tests: guarantee abs_srcdir in all C tests
While trying to debug a failure of virpcitest during 'make distcheck',
I noticed that with a VPATH build, 'cd tests; ./virpcitest' fails for
an entirely different reason.  To reproduce the distcheck failure, I
had to run 'cd tests; abs_srcdir=/path/to/src ./virpcitest'.  But we
document in HACKING that all of our tests are supposed to be runnable
without requiring extra environment variables.

The solution: hardcode the location of srcdir into the just-built
binaries, rather than requiring make to prepopulate environment
variables.  With this, './virpcitest' passes even in a VPATH build
(provided that $(srcdir) is writable; a followup patch will fix the
conditions required by 'make distcheck').  [Note: the makefile must
still pass on directory variables to the test environment of shell
scripts, since those aren't compiled.  So while this solves the case
of a compiled test, it still requires environment variables to pass
a VPATH build of any shell script test case that relies on srcdir.]

* tests/Makefile.am (AM_CFLAGS): Define abs_srcdir in all compiled
tests.
* tests/testutils.h (abs_srcdir): Quit declaring.
* tests/testutils.c (virtTestMain): Rely on define rather than
environment variable.
* tests/virpcimock.c (pci_device_new_from_stub): Rely on define.
* tests/cputest.c (mymain): Adjust abs_top_srcdir default.
* tests/qemuxml2argvtest.c (mymain): Likewise.
* tests/qemuxmlnstest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-27 14:39:56 -07:00
Clark Laughlin
c7ccd2c44b qemu: Add support for virt machine type with virtio-mmio devices on armv7
These changes allow the correct virtio-blk-device and virtio-net-device
devices to be used for the 'virt' machine type for armv7 rather than the
PCI virtio devices.

A test case was added to qemuxml2argvtest for this change.

Signed-off-by: Clark Laughlin <clark.laughlin@linaro.org>
2013-11-20 14:31:17 -05:00
Michal Privoznik
9fb3f9571d virSecurityLabelDefParseXML: Don't parse label on model='none'
https://bugzilla.redhat.com/show_bug.cgi?id=1027096

If there's the following snippet in the domain XML, the domain will be
lost upon the daemon restart (if the domain is started prior restart):

    <seclabel type='dynamic' relabel='yes'/>

The problem is, the 'label', 'imagelabel' and 'baselabel' are parsed
whenever the VIR_DOMAIN_XML_INACTIVE is *not* present or the label is
static. The latter is not our case, obviously. So, when libvirtd starts
up, it finds domain state xml and parse it. During parsing, many XML
flags are enabled but VIR_DOMAIN_XML_INACTIVE. Hence, our parser tries
to extract 'label', 'imagelabel' and 'baselabel' from the XML which
fails for model='none'. Err, this model - even though not specified in
XML - can be taken from qemu wide config file: /etc/libvirtd/qemu.conf.

However, in order to know we are dealing with model='none' the code in
question must be moved forward a bit. Then a new check must be
introduced. This is what the first two chunks are doing.

But this alone is not sufficient. The domain state XML won't contain the
model attribute without slight modification. The model should be
inserted into the XML even if equal to 'none' and the state XML is being
generated - what if the origin (the @security_driver variable in
qemu.conf) changes during libvirtd restarts?

At the end, a test to catch this scenario is introduced.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2013-11-11 16:01:25 +01:00
Peter Krempa
e0dc851164 qemu: Add support for paravirtual spinlocks in the guest
The linux kernel recently added support for paravirtual spinlock
handling to avoid performance regressions on overcomitted hosts. This
feature needs to be turned in the hypervisor so that the guest OS is
notified about the possible support.

This patch adds a new feature "paravirt-spinlock" to the XML and
supporting code to enable the "kvm_pv_unhalt" pseudo CPU feature in
qemu.

https://bugzilla.redhat.com/show_bug.cgi?id=1008989
2013-11-08 09:44:42 +01:00
Ján Tomko
1569fa14d8 qemu: don't use deprecated -no-kvm-pit-reinjection
Since qemu-kvm 1.1 [1] (since 1.3. in upstream QEMU [2])
'-no-kvm-pit-reinjection' has been deprecated.
Use -global kvm-pit.lost_tick_policy=discard instead.

https://bugzilla.redhat.com/show_bug.cgi?id=978719

[1] http://git.kernel.org/cgit/virt/kvm/qemu-kvm.git/commit/?id=4e4fa39
[2] http://git.qemu.org/?p=qemu.git;a=commitdiff;h=c21fb4f
2013-11-05 16:04:06 +01:00
Daniel P. Berrange
291a6ef3e4 Add support for enabling SASL for SPICE guests
QEMU has support for SASL auth for SPICE guests, but libvirt
has no way to enable it. Following the example from VNC where
it is globally enabled via qemu.conf

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-17 16:02:43 +01:00
Peter Krempa
f094aaac48 qemu: Prefer VFIO for PCI device passthrough
Prefer using VFIO (if available) to the legacy KVM device passthrough.

With this patch a PCI passthrough device without the driver configured
will be started with VFIO if it's available on the host. If not legacy
KVM passthrough is checked and error is reported if it's not available.
2013-10-10 12:00:56 +02:00
Cole Robinson
039eb5325e tests: Add qemu test for multiple timers
The following XML is the recommended default clock configuration for
qemu:

  <clock offset='utc'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
  </clock>

However we weren't testing any of those timer elements.
2013-10-08 17:41:51 -04:00
Daniel P. Berrange
eee6eb666c Remove test case average timing
The test case average timing code has not been used by any test
case ever. Delete it to remove complexity.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-10-08 12:39:30 +01:00
Peter Krempa
795527548f conf: Don't crash on invalid chardev source definition of RNGs and other
Since commit 297c99a5 an invalid source definition XML of a character
device that is used as backend for RNG devices, smartcards and redirdevs
causes crash of the daemon when parsing such a definition.

The device types mentioned above are not a part of a regular character
device but are backends for other types. Thus when parsing such device
NULL is passed as the argument @chr_def. Later when checking the
validity of the definition @chr_def was dereferenced when parsing a UNIX
socket backend with missing path of the socket and crashed the daemon.

Sample offending configuration:
  <devices>
  ...
    <rng model='virtio'>
      <backend model='egd' type='unix'>
        <source mode='bind' service='1024'/>
      </backend>
    </rng>
  </devices>

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1012196
2013-09-26 08:48:38 +02:00
Laine Stump
b83d26f6c4 qemu: support ich9-intel-hda audio device
This resolves one of the issues in:

   https://bugzilla.redhat.com/show_bug.cgi?id=1003983

This device is identical to qemu's "intel-hda" device (known as "ich6"
in libvirt), but has a different PCI device ID (which matches the ID
of the hda audio built into the ich9 chipset, of course). It's not
supported in earlier versions of qemu, so it requires a capability
bit.
2013-09-25 10:38:02 -04:00
Aline Manera
8ffe1d0c46 Add tftp protocol support for cdrom disk
qemu/KVM also supports a tftp URL while specifying the cdrom ISO image.

The xml should be as following:

    <disk type='network' device='cdrom'>
      <source protocol='tftp' name='/url/path'>
        <host name='host.name' port='69'/>
      </source>
    </disk>

Signed-off-by: Aline Manera <alinefm@br.ibm.com>
2013-09-17 14:45:02 +01:00