Commit Graph

431 Commits

Author SHA1 Message Date
Daniel Veillard
3a4d9d1ed3 Release of libvirt-0.9.13
* configure.ac docs/news.html.in libvirt.spec.in: new version and
  documentation update
* po/*.po*: updated and regenerated localizations
2012-07-02 11:25:36 +08:00
Daniel P. Berrange
48939a4aba Fix typo in RPM specfile
libvirt.spec.in: s/{?rhel}/%{?rhel}/
2012-06-12 15:54:56 +01:00
Daniel P. Berrange
1cdbe4d22a Two RPM conditional fixes for RHEL-7
Ensure systemd is used in RHEL-7 and cgconfig is not used in
RHEL-7
2012-06-11 18:07:20 +01:00
Cole Robinson
dd7bc51bc4 spec: Build against systemd for udev
They have now merged. Fedora details here:

https://lists.fedoraproject.org/pipermail/devel/2012-June/168227.html
2012-06-06 16:53:36 -04:00
Martin Kletzander
730cc8d783 Fixes for check and rpm builds without sanlock (and qemu)
Apart from the non-sanlock check build, there is also a little fix for
qemu (EXTRA_DIST had qemu.conf and others inside even if the build was
supposed to be without qemu).
2012-05-30 18:57:50 +02:00
Daniel P. Berrange
83fe3d22e2 Fix typos in RPM dependencies
s/daemon-driver-nwilter/daemon-driver-nwfilter/
s/daemon-network/daemon-driver-network/

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-28 10:53:54 +01:00
Wen Congyang
81e9e7cf3b fix building error on non fedora system
We forget to define with_storage_rbd if the system is not fedora,
or the version is less than 16.
2012-05-24 21:11:58 +08:00
Daniel P. Berrange
b3cf13bb2f Enable driver modules in libvirt RPM
Turn on loadable modules for libvirtd. Add new sub-RPMs
libvirt-daemon-driver-XXX, one for each loadable .so.
Modify the libvirt-daemon-YYY RPMs to depend on each of
the individual drivers they required

* libvirt.spec.in: Enable driver modules

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2012-05-24 13:18:01 +01:00
Daniel P. Berrange
aad1625da6 Fix dep from libvirt-lock-sanlock RPM
The libvirt-lock-sanlock RPM requires libvirtd, so its RPM dep
should be on libvirt-daemon, not libvirt
2012-05-24 13:18:00 +01:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Daniel P. Berrange
3247b63ba9 Add bundled(gnulib) to RPM specfile
According to Fedora guidelines, because we bundle gnulib we
need to add a virtual Provides: bundled(gnulib).

https://fedoraproject.org/wiki/Packaging:No_Bundled_Libraries#Requirement_if_you_bundle
2012-05-15 16:25:30 +01:00
Daniel Veillard
a25d5cfd80 Release of libvirt-0.9.12
* configure.ac docs/news.html.in libvirt.spec.in: updates for the release
* po/*.po: pushed new sources and synchronized new languages translations
2012-05-14 10:52:04 +08:00
Osier Yang
b736e72255 numad: Update comments in libvirt.spec.in
Not only support CPU placement now.
2012-05-09 13:12:38 +08:00
Cole Robinson
f4345ac21f rpm: Handle different source URLs for maint releases 2012-05-07 10:50:53 -04:00
Daniel P. Berrange
cf2ed25c9a Fix initial hypervisor conditionals
The openvz, virtualbox and vmware drivers do not run inside
libvirtd, therefore they should be grouped with the other
client side drivers
2012-04-04 10:54:20 +01:00
Daniel P. Berrange
899bf6680a Remove bogus xen-devel dep from libvirt-devel RPM
The public libvirt API does not have any application visible
dependency on Xen libraries. The xen-devel dependency is thus
bogus
2012-04-04 10:54:10 +01:00
Daniel P. Berrange
726e391d37 Introduce per-hypervisor virtual RPMs
Introduce a set sub-RPMs, one per hypervisor, which can be used
as dependency targets by applications wishing to pull in the
full stack of packages required for a specific hypervisor. This
avoids the application needing to know what the hypervisor specific
package set is.

ie, applications should not need to know that using the libvirt
Xen hypervisor requires the 'xen' RPM - libvirt should take care
of that knowledge. All the application wants is 'libvirt-daemon-xen'

There are 5 sub-RPMs:

  libvirt-daemon-qemu - non-native TCG based emulators
  libvirt-daemon-kvm  - native KVM hypervisor
  libvirt-daemon-uml  - User Mode linux
  libvirt-daemon-xen  - Xen, either via XenD or libxl
  libvirt-daemon-lxc  - Linux native containers

When driver modules get turned on, these sub-RPMs will also
gain dependencies on the appropriate driver module .so files
2012-04-04 10:53:49 +01:00
Daniel P. Berrange
bb14513465 Split config files & daemon off from main daemon RPM
Take the libvirt RPM and split it into three pieces

 - libvirt-daemon - libvirtd & other mandatory bits for its operation
 - libvirt-daemon-config-network - the virbr0 config definition
 - libvirt-daemon-config-nwfilter - the firewall config rules

For backwards compatibility with existing installs / application RPM
deps, the 'libvirt' RPM is retained, but will have a dependency on
the 3 new RPMs.
2012-04-04 10:53:35 +01:00
Daniel P. Berrange
189fbe1a8f Remove API XML files from libvirt RPM
The API XML files are now formally installed as part of the
libvirt-devel RPM. Thus there is no need to include them as
%doc in the main libvirt RPM
2012-04-04 10:52:39 +01:00
Daniel P. Berrange
524ba61d9b Move all documentation into a -docs sub-RPM
Currently documentation is split between the libvirt RPM and the
libvirt-devel RPM. In the client-only build there is no libvirt
RPM, so the docs need to live elsewhere. The obvious answer is a
dedicated libvirt-docs RPM. For back-compatibility make the
libvirt-devel RPM require the libvirt-docs RPM

* libvirt.spec.in: Create separate libvirt-docs RPM
2012-04-04 10:52:39 +01:00
Daniel Veillard
782afa98e4 Release of libvirt 0.9.11
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated a number of languages translation including new
  indian languages and regenerated
2012-04-03 15:06:37 +08:00
Daniel Veillard
683e011137 Revert "Refactor the libvirt RPM daemon pieces"
This reverts commit 06a0d57f5a.
2012-04-03 14:49:31 +08:00
Daniel P. Berrange
8bf0442e83 Fix client only RPM build & other misc RPM problems
* libvirt.spec.in: Remove obsolete --with-remote-pid-file arg.
  Add missing %{without_libxl} statement. Fix handling of docs
  in client only build. Put systemtap files in -client RPM
  instead of -daemon RPM
* examples/xml/nwfilter/Makefile.am: Don't install examples if
  nwfilter is disabled.
2012-03-31 13:22:40 +01:00
Daniel P. Berrange
06a0d57f5a Refactor the libvirt RPM daemon pieces
There are a number of flaws with our packaging of the libvirtd
daemon:

 - Installing 'libvirt' does not install 'qemu-kvm' or 'xen'
   etc which are required to actually run the hypervisor in
   question
 - Installing 'libvirt' pulls in the default configuration
   files which may not be wanted & cause problems if installed
   inside a guest
 - It is not possible to explicitly required all the peices
   required to manage a specific hypervisor

This change takes the 'libvirt' RPM and and changes it thus

 - libvirt: just a virtual package with dep on libvirt-daemon,
   libvirt-daemon-config-network & libvirt-daemon-config-nwfilter
 - libvirt-daemon: the libvirt daemon and related pieces
 - libvirt-daemon-config-network: the default network config
 - libvirt-daemon-config-nwfilter: the network filter configs
 - libvirt-docs: the website HTML

We then introduce some more virtual (empty) packages

 - libvirt-daemon-qemu: Deps on libvirt-daemon & 'qemu'
 - libvirt-daemon-kvm: Deps on libvirt-daemon & 'qemu-kvm'
 - libvirt-daemon-lxc: Deps on libvirt-daemon
 - libvirt-daemon-uml: Deps on libvirt-daemon
 - libvirt-daemon-xen: Deps on libvirt-daemon & 'xen'

 - libvirt-qemu: Deps on libvirt-daemon-qemu & libvirt-daemon-config-{network,nwfilter}
 - libvirt-kvm: Deps on libvirt-daemon-kvm & libvirt-daemon-config-{network,nwfilter}
 - libvirt-lxc: Deps on libvirt-daemon-lxc & libvirt-daemon-config-{network,nwfilter}
 - libvirt-uml: Deps on libvirt-daemon-uml & libvirt-daemon-config-{network,nwfilter}
 - libvirt-xen: Deps on libvirt-daemon-xen & libvirt-daemon-config-network

My intent in the future is to turn on the driver modules by
default, at which time 'libvirt-daemon' will cease to include
any specific drivers, instead we'll get libvirt-daemon-driver-XXXX
packages for each driver. The libvirt-daemon-XXX packages will
then pull in each driver that they require.

It is recommended that applications required a locally installed
libvirtd daemon, use either 'Requires: libvirt-daemon-XXXX' or
'Requires: libvirt-XXX' and *not* "Requires: libvirt-daemon"
or 'Requires: libvirt'

* libvirt.spec.in: Refactor RPMs
* docs/packaging.html.in, docs/sitemap.html.in: Document
  new RPM split rationale
2012-03-31 12:20:38 +01:00
Osier Yang
beb76e3742 spec: Add missed dependancy for numad
numad is available since Fedora 17 and RHEL6.X. And it's not supported
on s390[x] and ARM.
2012-03-24 09:35:20 +08:00
Li Zhang
8120325750 Add qemu support for ppc64 on FC16 or above for rpm packaging
On Fedora16 or above, qemu is supported now. So it is added
in rpm packaging.

Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
2012-03-23 12:40:13 -04:00
Martin Kletzander
801a60ff88 Fixed service handling in specfile
After adding the libvirt-guests service into usual runlevels, we used
to start the libvirt-guests service. However this is usually not a
good practice. As mentioned on fedoraproject wiki, the installations
can be in changeroots, in an installer context, or in other situations
where we don't want the services autostarted.
2012-02-24 16:31:04 -07:00
Peter Robinson
cb8b9963fe spec: use ix86 macros
* libvirt.spec.in: Use %{ix86} rather than open-coded list.
2012-02-20 09:37:52 -07:00
Michal Privoznik
286088567d storage: Allow runtime detection of scrub
Currently, if scrub (used for wiping algorithms) is not present
at compile time, we don't support any other wiping algorithms than
zeroing, even if it was installed later. Switch to runtime detection
instead.
2012-02-16 09:09:43 +01:00
Daniel P. Berrange
5452e88c32 Fix typos in API XML file paths
* libvirt.pc.in: Add missing '/api/' in path
* libvirt.spec.in, mingw32-libvirt.spec.in: s/apis/api/
2012-02-15 11:29:38 +00:00
Daniel P. Berrange
c95c90ee4a Install API XML desc to a standard location
Language bindings may well want to use the libvirt-api.xml and
libvirt-qemu-api.xml files to either auto-generate themselves,
or sanity check the manually written bindings for completeness.
Currently these XML files are not installed as standard, merely
ending up as a %doc file in the RPM.

This changes them to be installed into $prefix/share/libvirt/apis/
The *-refs.xml files are not installed, since those are only
useful during generation of the online API doc files.

The pkg-config file is enhanced so that you can query the install
location of the API files. eg

  # pkg-config --variable=libvirt_qemu_api libvirt
  /home/berrange/builder/i686-pc-mingw32/sys-root/mingw/share/libvirt/libvirt-qemu-api.xml

* docs/Makefile.am: Install libvirt-api.xml & libvirt-qemu-api.xml
* libvirt.pc.in: Add vars for querying API install location
* libvirt.spec.in, mingw32-libvirt.spec.in: Include API XML files
2012-02-14 16:42:02 +00:00
Daniel Veillard
bca060a363 Release of libvirt-0.9.10
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: update ja, it and uk localization, fixed the ja one
2012-02-13 22:31:31 +08:00
Laine Stump
60f190735c build: don't require avahi during install
See: https://bugzilla.redhat.com/show_bug.cgi?id=785269

The specfile requires avahi during install if libvirt was built with
avahi support, but there are many situations where it is undesirable
to install avahi due to security concerns. This patch requires only
the avahi-libs package, which is needed by libvirt to call the
function that tries to attach to the avahi daemon, but will instead
silently fail because the avahi-daemon is in the main avahi package,
and that package isn't installed.
2012-02-07 14:24:05 -05:00
Daniel P. Berrange
54a38915d8 Add a virt-host-validate command to sanity check HV config
To assist people in verifying that their host is operating in an
optimal manner, provide a 'virt-host-validate' command. For each
type of hypervisor, it will check any pre-requisites, or other
good recommendations and report what's working & what is not.

eg

  # virt-host-validate
  QEMU: Checking for device /dev/kvm                                         : FAIL (Check that the 'kvm-intel' or 'kvm-amd' modules are loaded & the BIOS has enabled virtualization)
  QEMU: Checking for device /dev/vhost                                       : WARN (Load the 'vhost_net' module to improve performance of virtio networking)
  QEMU: Checking for device /dev/net/tun                                     : PASS
   LXC: Checking for Linux >= 2.6.26                                         : PASS

This warns people if they have vmx/svm, but don't have /dev/kvm. It
also warns about missing /dev/vhost net.
2012-01-27 17:53:18 +00:00
Daniel Veillard
450c927d9a Remove dmidecode dependancy outside PC arches
The new dependancy is only available on ix86, x86_64 and ia64
2012-01-18 00:22:17 +08:00
Daniel Veillard
2f667b5697 Release of libvirt-0.9.9
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: updated localizations from transifex and regenerated
2012-01-07 12:18:06 +08:00
Daniel Veillard
cbc7025942 Require avahi as an rpm dependancy
As seen in https://bugzilla.redhat.com/show_bug.cgi?id=746111

If compiled with the daemon and avahi support, then it's better
to require avahi at the rpm level to avoid daemon startup errors.
2011-12-29 22:01:57 +08:00
Wen Congyang
6e53293812 spec: fix inverted logic on sanlock
Commit d336dbdb tried to refactor sanlock to avoid building it
on RHEL for architectures where it is not available, but used
the wrong conditional.

* libvirt.spec.in (with_sanlock): Use %ifarch, not %ifnarch.
2011-12-14 10:31:30 -07:00
Eric Blake
3b95f284f1 spec: fix logic bug in deciding to turn on cgconfig
https://bugzilla.redhat.com/show_bug.cgi?id=738725

Commit ecd8725 tried to silence a spurious warning on the initial
libvirt install, and commit ba6cbb1 tried to fix up the logic to the
correct Fedora version, but the warning was still present due to a
logic bug: since %{fedora} and %{rhel} are never simulatanously
set, then 0%{rhel} <= 6 made the %if always true.  Checking for
minimum versions (via >=) is okay, but checking for maximum versions
(via <=) requires a prerequisite test that the platform being tested
is non-zero.

Also fix a bogus setting of with_libxl (although we previously
hard-code with_libxl to 0 for rhel earlier in the file, so this
was not as severe a bug).

* libvirt.spec.in (with_cgconfig): Don't enable cgconfig on F16.
2011-12-08 13:52:54 -07:00
Eric Blake
9c417636c4 spec: make it easier to autoreconf when building rpm
Over time, Fedora and RHEL RPMs have often backported upstream
patches that touched configure.ac and/or Makefile.am; this
necessitates rerunning the autotools for the patch to be effective.
Making this a one-liner spec tweak will make it easier for future
backports to pull patches without having to find all the places
to touch to properly use the autotools.  Meanwhile, there have been
historical instances where an update in the autotools caused FTBFS
situations, so this is not on by default.

* libvirt.spec.in (enable_autotools): New variable, default off.
(BuildRequires): Conditionally add autotools.
(%build): Conditionally use them before configure.
* mingw32-libvirt.spec.in: Likewise.
2011-12-08 09:49:50 -07:00
Daniel P. Berrange
011a3350be Ensure to prefix %{buildroot} when overriding systemd install location
The %makeinstall macro does not set DESTDIR, instead of explicitly
prefixes %{buildroot} onto all paths. Thus we need to do the same
when setting the systemd unit dir

* libvirt.spec.in: Prefix %{buildroot} onto %{unitdir}
2011-12-08 15:48:49 +00:00
Daniel Veillard
7c6b0653f3 Release of libvirt-0.9.8
* configure.ac docs/news.html.in libvirt.spec.in: updated for the release
* po/*.po*: fetched localization update and regenerated
2011-12-08 15:13:50 +08:00
Eric Blake
fea83dde7b spec: don't use chkconfig --list
https://bugzilla.redhat.com/show_bug.cgi?id=694403 reports that
the specfile is incorrectly checking for a running libvirt-guests
service.  For example,

$ LC_ALL=es_ES chkconfig --list libvirt-guests
libvirt-guests 	  0:desactivado		 1:desactivado	   2:desactivado     3:activo	 4:activo  5:activo	    6:desactivado

will fail to find 5:on, even though it is active.  But chkconfig
already has a mode where you can silently use the exit status to
check for an active service.

* libvirt.spec.in (%post): Use simpler chkconfig options, to avoid
issues with localization.
2011-12-07 20:54:07 -07:00
Eric Blake
d336dbdb33 spec: fix sanlock dependency
* libvirt.spec.in (with_sanlock): On RHEL, don't force sanlock
on architectures where it isn't available.
2011-12-05 11:29:32 -07:00
Eric Blake
e7dfa468f9 spec: add dmidecode as prereq
https://bugzilla.redhat.com/show_bug.cgi?id=754909 complains that
because libvirt didn't require dmidecode, that the logs are noisy
and virConnectGetSysinfo needlessly fails.  Even 'virt-what' requires
dmidecode, so it's not that onerous of a dependency.  We may be
able to drop this in the future when we move to parsing sysfs data,
but for now, listing the dependency will help matters.

* libvirt.spec.in (Requires): Sort Requires before BuildRequires.
Add dmidecode.
2011-12-05 11:00:45 -07:00
Eric Blake
764574f7c7 spec: mark directories in /var/run as ghosts
We have several directories that are created on the fly, and which
only contain state relevant to a running libvirtd process (all
located in /var/run).  Since the directories are created as needed,
and make no sense without a running libvirtd, we want them deleted
if libvirt is uninstalled.  And in F15 and newer, /var/run is on
tmpfs (forcing us to recreate on the fly); which means that someone
trying to verify a complete rpm will fail if the directory does not
currently exist because libvirtd has not been started since boot.
The solution, then, is to mark the directories as %ghost, so that
rpm knows that we own them and will clean it up if libvirt is
uninstalled, but will no longer create the directory for us at
install, nor complain at verify time if the directory does not exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=656611.

* libvirt.spec.in (%files): Add %ghost to temporary directories
that we don't install, but want cleaned up on libvirt removal.
2011-12-01 10:56:10 +08:00
Srivatsa S. Bhat
e352b16400 Export KVM Host Power Management capabilities
This patch exports KVM Host Power Management capabilities as XML so that
higher-level systems management software can make use of these features
available in the host.

The script "pm-is-supported" (from pm-utils package) is run to discover if
Suspend-to-RAM (S3) or Suspend-to-Disk (S4) is supported by the host.
If either of them are supported, then a new tag "<power_management>" is
introduced in the XML under the <host> tag.

However in case the query to check for power management features succeeded,
but the host does not support any such feature, then the XML will contain
an empty <power_management/> tag. In the event that the PM query itself
failed, the XML will not contain any "power_management" tag.

To use this, new APIs could be implemented in libvirt to exploit power
management features such as S3/S4.
2011-11-22 11:31:22 +08:00
Daniel P. Berrange
4789fb2e4e Add support for systemd init service
This patch adds support for a systemd init service for libvirtd
and libvirt-guests. The libvirtd.service is *not* written to use
socket activation, since we want libvirtd to start on boot so it
can do guest auto-start.

The libvirt-guests.service is pretty lame, just exec'ing the
original init script for now. Ideally we would factor out the
functionality, into some shared tool.

Instead of

  ./configure --with-init-script=redhat

You can now do

  ./configure --with-init-script=systemd

Or better still:

  ./configure --with-init-script=systemd+redhat

We can also now support install of the upstart init script

* configure.ac: Add systemd, and systemd+redhat options to
  --with-init-script option
* daemon/Makefile.am: Install systemd services
* daemon/libvirtd.sysconf: Add note about unused env variable
  with systemd
* daemon/libvirtd.service.in: libvirtd systemd service unit
* libvirt.spec.in: Add scripts to installing systemd services
  and migrating from legacy init scripts
* tools/Makefile.am: Install systemd services
* tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in
* tools/libvirt-guests.service.in: systemd service unit
2011-11-18 16:16:02 +00:00
Daniel P. Berrange
a132fb0925 Disable numactl on ARM architectures too
* libvirt.spec.in: Disable numactl on ARM
2011-11-10 11:33:17 +00:00
Daniel P. Berrange
c1df2c14b5 Remove usage of brctl command line tool
Convert the virNetDevBridgeSetSTP and virNetDevBridgeSetSTPDelay
to use ioctls instead of spawning brctl.

Implement the virNetDevBridgeGetSTP and virNetDevBridgeGetSTPDelay
methods which were declared in the header but never existed

* src/util/bridge.c: Convert to use bridge ioctls instead of brctl
2011-11-09 16:33:53 +00:00
Daniel Veillard
ab4823a062 Release of libvirt-0.9.7
* confiure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: update localizations and rebuilt
2011-11-08 14:55:25 +08:00
Daniel P. Berrange
f33b5792f7 Create /var/lib/libvirt/filesystems for LXC trees
We already have a /var/lib/libvirt/images for OS install images.
We need a separate /var/lib/libvirt/filesystems for OS install
trees, since SELinux labelling will be different

* libvirt.spec.in: Add /var/lib/libvirt/filesystems
* src/Makefile.am: Create /var/lib/libvirt/filesystems
2011-11-01 18:40:37 +00:00
Daniel P. Berrange
777ffbd0e2 Allow for URI aliases when connecting to libvirt
This adds support for a libvirt client configuration file
either /etc/libvirt/libvirt.conf for privileged clients,
or $HOME/.libvirt/libvirt.conf for unprivileged clients.

It allows one parameter

 uri_aliases = [
   "hail=qemu+ssh://root@hail.cloud.example.com/system",
   "sleet=qemu+ssh://root@sleet.cloud.example.com/system",
 ]

Any call to virConnectOpen with a non-NULL URI will first
attempt to match against the uri_aliases list. An application
can disable this by using VIR_CONNECT_NO_ALIASES

* docs/uri.html.in: Document URI aliases
* include/libvirt/libvirt.h.in: Add VIR_CONNECT_NO_ALIASES
* libvirt.spec.in, mingw32-libvirt.spec.in: Add /etc/libvirt/libvirt.conf
* src/Makefile.am: Install default config file
* src/libvirt.c: Add support for URI aliases
* src/remote/remote_driver.c: Don't try to handle URIs
  with no scheme and which clearly are not paths
* src/util/conf.c: Don't raise error on virConfFree(NULL)
* src/xen/xen_driver.c: Don't raise error on URIs
  with no scheme
2011-10-19 09:14:34 +01:00
Eric Blake
df92bab4a8 spec: mingw cleanups
* libvirt.spec.in (%configure): Drop unused %{one} macro.
* mingw32-libvirt.spec.in (%{rhel}): Compile ESX but not HyperV on
mingw build for RHEL.
(%build): Make configure honor spec conditionals.  Reorder to
match libvirt.spec.
* autobuild.sh (mingw): Update list to match.
Suggested by Daniel P. Berrange.
2011-10-13 09:21:02 -06:00
Eric Blake
bbbdc14854 build: fix 'make rpm'
Since commit ddf3bd3, 'make rpm' failed with:

RPM build errors:
    File not found: /home/remote/eblake/rpmbuild/BUILDROOT/libvirt-0.9.6-1.fc14.eblake1318366440.x86_64/usr/share/systemtap/tapset/libvirtd.stp

* libvirt.spec.in (with_dtrace): Match installed .stp files.
2011-10-11 15:44:55 -06:00
Dan Horák
099dc93b7c disable xenlight for non-Xen platforms
when building libvirt in Fedora/s390x I've found that xenlight needs to
be explicitly disabled in the spec file. Configure properly sets the
library as non-existent, but the %files section still wants to package
the 3 /var/*/libvirt/libxl directories. See also
https://bugzilla.redhat.com/show_bug.cgi?id=745020
2011-10-11 14:24:18 -06:00
Eric Blake
5298551e07 init: raise default system aio limits
https://bugzilla.redhat.com/show_bug.cgi?id=740899 documents that
if qemu uses aio=native for its disks, then it consumes 128 aio
requests per disk.  On a host with multiple guests, this can quickly
run out of kernel aio requests with the default aio-max-nr of
65536.  Kernel developers have confirmed that there is no up-front
cost to raising this limit (a larger limit merely implies that more
aio requests can be issued in parallel, which in turn will result
in more kernel memory allocation, only if the system really does use
that many requests).  Since the system default limit prevents 256
disks, which is well within libvirt's current scalability, this
patch installs a file to raise the limit and document it in case a
system administrator has further cause to tune the limit.  The
install only works on platforms new enough to source /etc/sysctl.d/*
alongside /etc/sysctl.conf (F14 and RHEL 6).

* daemon/libvirtd.sysctl: New file.
* daemon/Makefile.am (EXTRA_DIST): Ship it.
(install-init, uninstall-init): Install it.
* libvirt.spec.in (%files): Include it in rpm.
2011-10-05 14:49:35 -06:00
Eric Blake
ba6cbb182b spec: F15 still uses cgconfig, RHEL lacks hyperv
Commit ecd8725c dropped attempts to probe the cgconfig service on
new enough Fedora where systemd took over that aspect of the system,
but mistakenly used F14 instead of F15 as the cutoff point.

https://bugzilla.redhat.com/show_bug.cgi?id=741358

Also, RHEL does not include HyperV support yet.

* libvirt.spec.in (with_cgconfig): Check cgconfig service in F15.
(%{?rhel}): Provide default for with_hyperv.
2011-09-27 09:03:26 -06:00
Daniel Veillard
508de7eedb Release of libvirt-0.9.6 2011-09-22 14:53:23 +08:00
Daniel Veillard
a362f1f7aa Release of libvirt-0.9.5
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: fetch updated translations from transifex and rebuilt
2011-09-20 14:17:47 +08:00
Daniel P. Berrange
19ff0ddfbb Update to require sanlock 1.8 for license compliance
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.

For all this we require sanlock >= 1.8

* configure.ac: Check for sanlock_client.so instead of sanlock.so
  and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
  sanlock_align
2011-09-20 11:18:54 +08:00
Eric Blake
ecd8725c1a spec: silence warnings when installing in F16
https://bugzilla.redhat.com/show_bug.cgi?id=738725 documents that
'yum install libvirt' in Fedora 16 is rather noisy.  This fixes
the problems.

* libvirt.spec.in (%post client): Silence chkconfig warning about
SysV services.
(%post) [with_cgconfig]: Drop for Fedora 15 and newer, where
systemd does this automatically.
2011-09-17 06:27:00 -06:00
Michal Privoznik
a73e92ba08 spec: Require augeas for sanlock
Even though we BuildRequire augeas in some cases, we need to require
it even after if we build with sanlock. virt-sanlock-cleanup use it.
2011-09-15 17:08:59 +02:00
Osier Yang
8918fc8edf qemu_api: Update libvirt spec file 2011-09-14 11:39:02 +08:00
Eric Blake
2a95a3e976 snapshot: update rng to support full domain in xml
This patch will probably cause merge conflicts to those trying
to do backports.  The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.

* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file.  Sort lines.
* mingw32-libvirt.spec.in: Likewise.
2011-09-03 08:12:13 -06:00
Osier Yang
660cb2530f storage: Add mkfs and libblkid to build system 2011-09-02 21:16:50 +08:00
Matthias Bolte
f2e7064373 hyperv: Add configure check for OpenWSMAN 2011-08-26 17:52:54 +02:00
Daniel Veillard
14c2ca3db9 Release of libvirt-0.9.4
* configure.ac docs/news.html.in libvirt.spec.in: updates for new
  release
* po/*.po*: pulled translations from the transifex teams and regenerated
  localizations
2011-08-03 11:02:42 +08:00
Daniel P. Berrange
7df6945d7f Add libtasn1-devel as a BuildRequires for libvirt.spec
* libvirt.spec.in: Add libtasn1-devel
2011-07-26 11:21:11 +01:00
Michal Privoznik
90074ecfa7 bandwidth: Implement functions to enable and disable QoS
These function executes 'tc' with appropriate arguments to set
desired QoS setting on interface or bridge during its creation.
2011-07-25 13:49:55 +08:00
Daniel P. Berrange
c198d91667 Pre-create /var/lib/libvirt/sanlock directory
The sanlock plugin for libvirt expects the directory
/var/lib/libvirt/sanlock to exist. Create this and add
it to the RPM

* libvirt.spec.in: Add /var/lib/libvirt/sanlock
* src/Makefile.am: Create /var/lib/libvirt/sanlock
2011-07-22 15:52:44 +01:00
Laine Stump
a3d95b550b conf: put virtPortProfile struct / functions in a common location
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
2011-07-21 14:46:33 -04:00
Wen Congyang
f209333996 build: disable some drivers when building without libvirt daemon
We disable some drivers when building without libvirtd in configure,
but we do not do the same thing in libvirt.spec. It may break rpm
building without libvirtd.
2011-07-14 22:59:07 +08:00
Daniel Veillard
920ffe1b0a Fix rpm build with sanlock and without QEmu
The qemu-sanlock.conf file is not installed in this case
2011-07-11 15:57:01 +08:00
Laine Stump
0c97dc4159 xml: create an RNG file for common types and move some definitions there
domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.

This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...
2011-07-05 12:33:21 -04:00
Daniel Veillard
7976d96dd7 Release of libvirt-0.9.3
* configure.ac docs/news.html.in libvirt.spec.in: update for the
  new release
* po/*.po*: updated and regenerated localizations
2011-07-04 15:54:36 +08:00
Eric Blake
d710531f95 build: sanlock-devel is not in F15 yet
* libvirt.spec.in (with_sanlock): Only default on in rawhide.
Reported by Gerhard Stenzel.
2011-06-28 11:25:04 -06:00
Daniel P. Berrange
97e4f21782 Support automatic creation of leases for disks in sanlock
The current sanlock plugin requires a central management
application to manually add <lease> elements to each guest,
to protect resources that are assigned to it (eg writable
disks). This makes the sanlock plugin useless for usage
in more ad hoc deployment environments where there is no
central authority to associate disks with leases.

This patch adds a mode where the sanlock plugin will
automatically create leases for each assigned read-write
disk, using a md5 checksum of the fully qualified disk
path. This can work pretty well if guests are using
stable disk paths for block devices eg /dev/disk/by-path/XXXX
symlinks, or if all hosts have NFS volumes mounted in
a consistent pattern.

The plugin will create one lockspace for managing disks
with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__.
For each VM disks, there will be another file to hold
a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd
Each VM disk lease is usually 1 MB in size. The script
virt-sanlock-cleanup should be run periodically to remove
unused lease files from the lockspace directory.

To make use of this capability the admin will need to do
several tasks:

 - Mount an NFS volume (or other shared filesystem)
   on /var/lib/libvirt/sanlock
 - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf
   with a unique value for each host with the same NFS
   mount
 - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf

Technically the first step can be skipped, in which case
sanlock will only protect against 2 vms on the same host
using the same disk (or the same VM being started twice
due to error by libvirt).

* src/locking/libvirt_sanlock.aug,
  src/locking/sanlock.conf,
  src/locking/test_libvirt_sanlock.aug: Add config params
  for configuring auto lease setup
* libvirt.spec.in: Add virt-sanlock-cleanup program, man
  page
* tools/virt-sanlock-cleanup.in: Script to purge unused
  disk resource lease files
2011-06-28 18:18:06 +01:00
Daniel P. Berrange
58eb4f2cbb Support loading a configuration file for sanlock plugin
Introduce a configuration file with a single parameter
'require_lease_for_disks', which is used to decide whether
it is allowed to start a guest which has read/write disks,
but without any leases.

* libvirt.spec.in: Add sanlock config file and augeas
  lens
* src/Makefile.am: Install sanlock config file and
  augeas lens
* src/locking/libvirt_sanlock.aug: Augeas master lens
* src/locking/test_libvirt_sanlock.aug: Augeas test file
* src/locking/sanlock.conf: Example sanlock config
* src/locking/lock_driver_sanlock.c: Wire up loading
  of configuration file
2011-06-28 18:07:06 +01:00
Ruben Kerkhof
ca43756800 Only include parthelper if built with storage_disk
Parthelper is only compiled if both --with-libvirtd
and --with-storage-disk are set.

Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
2011-06-27 08:50:40 -06:00
Eric Blake
1486099cca build: require newer netcf when it is available
When building rpms for newer Fedora or RHEL, take advantage of the
newer netcf packaging to guarantee interface snapshot support.

* libvirt.spec.in (BuildRequires): Bump minimum version on
platforms that support netcf 0.1.8.
2011-06-21 14:27:32 -06:00
Matthias Bolte
7e3205cd10 Move XenAPI driver to correct spec file section
The XenAPI driver works like the ESX and PHyp driver by using its
own HTTPS based remote protocol.
2011-06-20 10:23:55 +02:00
Matthias Bolte
7c7626aee0 Move VMware Workstation/Player driver to correct spec file section
The VMware driver works like the OpenVZ driver by using a commandline
tool for management. It dosen't use it's own remote protocol.
2011-06-09 20:28:18 +02:00
Daniel Veillard
2c5ded6e82 Release of libvirt-0.9.2
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: updated translations and regenerated
2011-06-06 11:46:37 +08:00
Daniel P. Berrange
9f135031ff Add a plugin for the 'sanlock' project
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.

* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
2011-06-02 10:54:01 +01:00
Richard W.M. Jones
ee9ceb3295 libvirt.spec: /var/cache/libvirt should be 0711.
This allows qemu to create files in /var/cache/libvirt/qemu/, and
specifically is required to fix virDomainMemoryPeek.
2011-05-20 16:18:11 +01:00
Daniel Veillard
9b889aacef Release of libvirt-0.9.1
* configure.ac libvirt.spec.in docs/news.html.in: update and document
  the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
  and vietnamese coming from transifex, regenerate
2011-05-05 11:25:13 +08:00
Alan Pevec
16d6b0d80a Experimental libvirtd upstart job
To install it, disable libvirtd sysv initscript:
    chkconfig libvirtd off
    service libvirtd stop

and enable libvirtd upstart job:
    cp  /usr/share/doc/libvirt-*/libvirtd.upstart \
        /etc/init/libvirtd.conf
    initctl reload-configuration
    initctl start libvirtd

Test:
    initctl status libvirtd
libvirtd start/running, process 3929
    killall -9 libvirtd
    initctl status libvirtd
libvirtd start/running, process 4047

I looked into the possibility to use the upstart script from Ubuntu or
at least getting inspiration from it but that's not possible. "expect
daemon" is a nice thing but it only works if the process is defined with
exec stanza instead of script ... no script. Unfortunately, with exec
stanza environment variables can only be set within upstart script
(i.e., configuration in /etc/sysconfig/libvirtd can't work). Hence, we
need to use script stanza, source sysconfig, and execute libvirtd
without --daemon. For similar reasons we can't use limit stanza and need
to handle DAEMON_COREFILE_LIMIT in job's script.
2011-04-18 11:38:30 +02:00
Daniel P. Berrange
a7e80bde11 Fix typo in systemtap tapset directory name
The systemtap directory for tapsets is called

  /usr/share/systemtap/tapset

Not

 /usr/share/systemtap/tapsets

* daemon/Makefile.am,libvirt.spec.in: s/tapsets/tapset/
2011-04-05 17:44:12 +01:00
Daniel Veillard
d17e438ad3 Release of libvirt-0.9.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update polish translation and regenerate
2011-04-04 20:15:45 +08:00
Daniel Veillard
1613912dc2 Add libvirt_iohelper to spec file
The new iohelper binary was missing from the packaging spec
2011-03-30 08:54:23 +08:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Eric Blake
206fc979b1 rpm: add missing dependencies
Among others, the missing radvd dependency showed up as:

error: Failed to start network ipv6net
error: Cannot find radvd - Possibly the package isn't installed: No such file
or directory

even when radvd was installed, because the RADVD preprocessor
symbol was missing at configure time.

* libvirt.spec.in (with_network): Add BuildRequires for radvd,
iptables, and ip6tables.
(BuildRequires): Add libxslt and augeas for docs and test.
(with_libvirtd): Add module-init-tools for modprobe.
(with_nwfilter): Add BuildRequires for ebtables.
(with_esx): Fix esx build on RHEL 5, thanks to curl-devel rename.
2011-03-23 11:16:49 -06:00
Eric Blake
7ee06f334b rpm: separate runtime and build requirements
* libvirt.spec.in (Requires): Reorganize requirements a bit; no
functional change.
2011-03-23 11:03:23 -06:00
Daniel P. Berrange
3c204d7d5b Disable libxl build in RPM on Fedora < 16
The xen RPM in Fedora isn't new enough to support libxl builds
yet. Disable it until Fedora 16

* libvirt.spec.in: Disable libxl on Fedora < 16
2011-03-22 14:25:51 +00:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Eric Blake
80e6200f32 build: improve rpm generation for distro backports
When building for an older distro, it's convenient to just
tell rpmbuild to define dist (for example, to .el6_0), rather
than also remembering to define rhel to 6.

* libvirt.spec.in: Guess %{rhel} based on %{dist}.
Based on an idea by Jiri Denemark.
2011-03-16 11:56:00 -06:00
Daniel Veillard
e7aeed0067 Add logrotate support for libvirtd.log
As the file may grow quite a bit especially with debug turned on.
* daemon/libvirtd.logrotate.in daemon/Makefile.am libvirt.spec.in:
  add new logrotate file for the daemon log
2011-03-04 22:43:55 +08:00
Eric Blake
e57f834547 build: add dependency on gnutls-utils
* libvirt.spec.in (Requires): Add gnutls-utils, for virt-pki-validate.
Suggested by Daniel P. Berrange.
2011-02-21 11:18:35 -07:00
Osier Yang
39164c11d3 Requires gettext for client package
libvirt-guests invokes functions in gettext.sh, so we need to
require gettext package in spec file.

Demo with the fix:
% rpm -q gettext
package gettext is not installed

% rpm -ivh libvirt-client-0.8.8-1.fc14.x86_64.rpm
error: Failed dependencies:
	gettext is needed by libvirt-client-0.8.8-1.fc14.x86_64

* libvirt.spec.in
2011-02-18 13:45:13 +08:00
Laine Stump
5754dbd56d Give each virtual network bridge its own fixed MAC address
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463

The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".

The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).

Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.

I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.

Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).

docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
    auto-generate mac address when needed,
    create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
2011-02-17 13:36:32 -05:00
Osier Yang
df1011ca8e storage: Allow to delete device mapper disk partition
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Error: Expecting a partition number.

This patch introduces 'dmsetup' to fix it.

Changes:
  - New function "virIsDevMapperDevice" in "src/utils/utils.c"
  - remove "is_dm_device" in "src/storage/parthelper.c", use
    "virIsDevMapperDevice" instead.
  - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
  - Check "dmsetup" in 'configure.ac' for "with-storage-disk"
  - Changes on "src/Makefile.am" to link against libdevmapper
  - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"

Changes from v1 to v3:
  - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
  - replace "virRun" with "virCommand"
  - sort the list of util functions in "libvirt_private.syms"
  - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.

e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted

Name                 Path
-----------------------------------------
2011-02-17 15:29:07 +08:00
Daniel Veillard
43f8773c1f Release of libvirt-0.8.8
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
2011-02-17 12:11:03 +08:00
Daniel P. Berrange
cee61fc298 Imprint all logs with version + package build information
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:13:28.013: 17536: info : libvirt version: 0.8.7
 18:13:28.013: 17536: debug : virInitialize:361 : register drivers
 ...

The 'configure' script gains two new arguments which can be
used as

   --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
   --with-packager-version="1.fc14"

to allow distros to append a custom string with package specific
data.

The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
 18:14:52.086: 17551: debug : virInitialize:361 : register drivers

Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds

* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
2011-02-11 14:13:08 +00:00
Jiri Denemark
b9c1a9cbff spec: Start libvirt-guests only if it's on in current runlevel 2011-01-19 15:01:52 +01:00
Daniel Veillard
6675e00744 Release of libvirt-0.8.7
* configure.ac libvirt.spec.in docs/news.html.in: bump version and add
  documentation
* po/*po*: regenerate po and pot files
2011-01-04 03:37:17 +01:00
Wen Congyang
3b13d25232 build: fix building error when building without libvirtd
When I build libvirt without libvirtd, I receive some errors:
cp: cannot stat `/home/wency/rpmbuild/BUILDROOT/libvirt-0.8.6-1.el6.x86_64/etc/libvirt/qemu/networks/default.xml': No such file or directory

My build step:
# ./autogen.sh --without-libvirtd
# make dist
# rpmbuild --nodeps --define "_sourcedir `pwd`" --define "_without_libvirtd 1" -ba libvirt.spec

The reason is we disable network when we do not build libvirt daemon in configure.ac.
After fixing this bug, I build libvirt without libvirtd, I receive other errors:
RPM build errors:
    Installed (but unpackaged) file(s) found:
   /usr/share/doc/libvirt-0.8.6/html/32favicon.png
   /usr/share/doc/libvirt-0.8.6/html/api.html
..

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
2010-12-24 07:31:34 -07:00
Jiri Denemark
40dbbd6e5f spec: Enable ESX driver on RHEL 2010-12-23 23:13:09 +01:00
Daniel P. Berrange
318a4f6be9 spec: Automatically turn on cgconfig service
A number of the libvirt APIs require the use of cgroups. This is not
enabled by default on a RHEL6 install. After discussion with cgroups
team, it was decided that upon installation of the libvirt RPM, we
should automatically turn on the cgroups service. This will activate a
default configuration that turns on all cgroups controllers libvirt
requires for full operation.
2010-12-23 23:13:07 +01:00
Eric Blake
973ada0e0b build: skip vmware driver when building for RHEL
* libvirt.spec.in: Provide vmware conditionals.
2010-12-21 10:13:50 -07:00
Dan Kenigsberg
91b3e1038f spec: do not start libvirt-guests if that service is off
starting a service during rpm installation is impolite. It is even worse if done
during upgrade, for a service that was explicitly turned off.
2010-12-09 16:55:48 -07:00
Daniel Veillard
a33db6cbfb Release of libvirt 0.8.6
- configure.ac libvirt.spec.in: bump version, add a missing systemtap
  build requirement
- docs/news.html.in: add informations about the release
- po/*: updated Polish and Dutch localizations, and regenerated
- tests/qemuxml2argvtest.c: Fix build problem
2010-11-30 20:42:46 +01:00
Cole Robinson
34d8ca2b7e rpm: Fix summary wording 2010-11-12 10:07:33 -05:00
Eric Blake
f970d802ab rpm: fix /var/lib/libvirt permissions
https://bugzilla.redhat.com/show_bug.cgi?id=649511

Regression of forcing 0700 permissions (which breaks guest startup
because the qemu user can't see /var/lib/libvirt/*.monitor) was
introduced in commit 66823690e, as part of libvirt 0.8.2.

* libvirt.spec.in (%files): Drop %{_localstatedir}/lib/libvirt,
since libvirt depends on libvirt-client.
(%files client): Guarantee 755 permissions on
%(_localstatedir}/lib/libvirt, since the qemu user must be able to
do pathname resolution to a subdirectory.
2010-11-10 09:00:47 -07:00
Matthias Bolte
e65812d479 xen-proxy: Remove it entirely and use libvirtd instead
Suggested by danpb, as it's not up-to-date anymore and
lacks many functions that were added to libvirtd.
2010-11-08 22:00:35 +01:00
Daniel Veillard
4c2b3e1d29 Release of libvirt-0.8.5
* configure.ac libvirt.spec.in: new version
* docs/news.html.in: update news page and improve format
* po/*.po*: Update po again
2010-10-29 16:54:07 +02:00
Daniel P. Berrange
968eb4e5cd Add dtrace static probes in libvirtd
Adds initial support for dtrace static probes in libvirtd
daemon, assuming use of systemtap dtrace compat shim on
Linux. The probes are inserted for network client connect,
disconnect, TLS handshake states and authentication protocol
states.

This can be tested by running the xample program and then
attempting to connect with any libvirt client (virsh,
virt-manager, etc).

 # stap examples/systemtap/client.stp
  Client fd=44 connected readonly=0
  Client fd=44 auth polkit deny pid:24997,uid:500
  Client fd=44 disconnected
  Client fd=46 connected readonly=1
  Client fd=46 auth sasl allow test
  Client fd=46 disconnected

The libvirtd.stp file should also really not be required,
since it is duplicated info that is already available in
the main probes.d definition file. A script to autogenerate
the .stp file is needed, either in libvirtd tree, or better
as part of systemtap itself.

* Makefile.am: Add examples/systemtap subdir
* autobuild.sh: Disable dtrace for mingw32
* configure.ac: Add check for dtrace
* daemon/.gitignore: Ignore generated dtrace probe file
* daemon/Makefile.am: Build dtrace probe header & object
  files
* daemon/libvirtd.stp: SystemTAP convenience probeset
* daemon/libvirtd.c: Add connect/disconnect & TLS probes
* daemon/remote.c: Add SASL and PolicyKit auth probes
* daemon/probes.d: Master probe definition
* daemon/libvirtd.h: Add convenience macro for probes
  so that compilation is a no-op when dtrace is not available
* examples/systemtap/Makefile.am, examples/systemtap/client.stp
  Example systemtap script using dtrace probe markers
* libvirt.spec.in: Enable dtrace on F13/RHEL6
* mingw32-libvirt.spec.in: Force disable dtrace
2010-10-22 12:00:39 +01:00
Daniel P. Berrange
8f680ad3b8 Basic framework for auditing integration
Integrate with libaudit.so for auditing of important operations.
libvirtd gains a couple of config entries for auditing. By
default it will enable auditing, if its enabled on the host.
It can be configured to force exit if auditing is disabled
on the host. It will can also send audit messages via libvirt
internal logging API

Places requiring audit reporting can use the VIR_AUDIT
macro to report data. This is a no-op unless auditing is
enabled

* autobuild.sh, mingw32-libvirt.spec.in: Disable audit
  on mingw
* configure.ac: Add check for libaudit
* daemon/libvirtd.aug, daemon/libvirtd.conf,
  daemon/test_libvirtd.aug, daemon/libvirtd.c: Add config
  options to enable auditing
* include/libvirt/virterror.h, src/util/virterror.c: Add
  VIR_FROM_AUDIT source
* libvirt.spec.in: Enable audit
* src/util/virtaudit.h, src/util/virtaudit.c: Simple internal
  API for auditing messages
2010-10-19 17:31:31 +01:00
Dan Kenigsberg
0df552cd37 qemu: let qemu group look below /var/lib/libvirt/qemu/
Vdsm needs to communicate with its guest agent via unix domain socket,
which qemu creates due to the following domain xml device:

    <channel type='unix'>
      <target type='virtio' name='com.redhat.rhevm.vdsm'/>
      <source mode='bind' path='/var/lib/libvirt/qemu/channels/fcp-xp-1.com.redhat.rhevm.vdsm'/>
    </channel>

The location of the socket below /var/lib/libvirt/qemu/channels makes
sense, to humans and selinux policy alike. However, that socket should
be accessible to vdsm, too.

Due to other (storage) reasons, vdsm is to join the "qemu" group. With
this patch, vdsm can look below /var/lib/libvirt/qemu and connect to the
socket.

The socket itself should be chmod'ed to allow qemu group read/write, but
that's for another project.

BZ#643407
2010-10-18 10:23:03 -06:00
Eric Blake
e3e31303d5 build: skip xenapi driver when building for RHEL
https://bugzilla.redhat.com/show_bug.cgi?id=643118

* libvirt.spec.in: Provide xenapi conditionals.
2010-10-15 07:31:36 -06:00
Daniel Veillard
9a8e152fef Libvirt release 0.8.4
update news, spec and french localizaton
2010-09-10 17:24:36 +02:00
Jiri Denemark
ad026e97bf build: Fix permissions of sysconfig files 2010-09-07 10:03:14 +02:00
Jiri Denemark
5cb7316372 spec: Fix undefined with_libnl
When building libvirt RPM without macvtap, with_libnl would be
undefined.
2010-08-25 12:28:02 +02:00
Jiri Denemark
e26672f786 bridge: Add --dhcp-no-override option to dnsmasq
--dhcp-no-override description from dnsmasq man page:

      Disable  re-use  of  the  DHCP servername and filename fields as
      extra option space. If it can, dnsmasq moves the boot server and
      filename  information  (from  dhcp-boot)  out of their dedicated
      fields into DHCP options. This make extra space available in the
      DHCP  packet  for options but can, rarely, confuse old or broken
      clients. This flag forces "simple and safe" behaviour  to  avoid
      problems in such a case.

It seems some virtual network card ROMs are this old/buggy so let's add
--dhcp-no-override as a workaround for them. We don't use extra DHCP
options so this should be safe. The option was added in dnsmasq-2.41,
which becomes the minimum required version.
2010-08-12 16:38:19 +02:00
Daniel Veillard
d3d33c8281 Release of libvirt-0.8.3
* configure.ac docs/news.html.in libvirt.spec.in: updates
* po/*.po*: update and regenerated
2010-08-04 15:03:25 +02:00
Justin Clift
de7d4c6ae7 man pages: update authors and copyright notice for libvirtd and virsh
This patch removes the individual author names from the libvirtd and virsh
man pages, instead referring to the main AUTHORS file distributed with
libvirt.  This approach is needed, as we can't guarantee unicode support
across all versions of pod2man used with libvirt.

Additionally, this patch includes the libvirtd man page in the spec file
used with "make rpm".  Without this patch "make rpm" is broken.
2010-07-17 04:51:01 +10:00
Matthias Bolte
9af989fabc Add openauth example to demonstrate a custom auth callback 2010-07-13 13:50:27 +02:00
Daniel Veillard
6f8e223780 Release of libvirt-0.8.2
- configure.ac docs/news.html.in libvirt.spec.in: updated
- po/*/o* : updated or.po and regenerated
2010-07-05 17:29:25 +02:00
Jiri Denemark
1a5c465ee5 Fix libvirt-guests init script
Firstly, the init script has to touch its file under /var/lock/subsys
when started, otherwise the system would think it's not running and
won't stop it during shutdown.

Secondly, for some reason there is a policy to automatically enable
init scripts when they are installed, so let the specfile do this. We
also need to start the init script to ensure it will be stopped during
the first shutdown after installing the package.

Also $LISTFILE should be enclosed by quotes everywhere as suggested by
Eric.
2010-05-28 18:00:53 +02:00
Matthias Bolte
fa0bb9f6b1 Use printf instead of echo -e in libvirt.spec.in
make rpm created dummy tests containing '-e #!/bin/sh' for me.
2010-05-27 01:11:15 +02:00
Matthias Bolte
5ac0272370 Install, distribute and package domainsnapshot.rng 2010-05-27 01:11:15 +02:00
Stefan Berger
a34871d9a5 vepa+vsi: Introduce dependency on libnl
This patch introduces a dependency on libnl, which subsequent patches
will then use.

Changes from V1 to V2:
- added diffstats
- following changes in tree
2010-05-25 15:31:38 -04:00
Jiri Denemark
66823690e4 Init script for handling guests on shutdown/boot
Example output during shutdown:

Running guests on default URI: console, rhel6-1, rhel5-64
Running guests on lxc:/// URI: lxc-shell
Running guests on xen:/// URI: error: no hypervisor driver available for xen:///
error: failed to connect to the hypervisor
Running guests on vbox+tcp://orkuz/system URI: no running guests.
Suspending guests on default URI...
Suspending console: done
Suspending rhel6-1: done
Suspending rhel5-64: done
Suspending guests on lxc:/// URI...
Suspending lxc-shell: error: Failed to save domain 9cba8bfb-56f4-6589-2d12-8a58c886dd3b state
error: this function is not supported by the hypervisor: virDomainManagedSave

Note, the "Suspending $guest: " shows progress during the suspend phase
if domjobinfo gives meaningful output.

Example output during boot:

Resuming guests on default URI...
Resuming guest rhel6-1: done
Resuming guest rhel5-64: done
Resuming guest console: done
Resuming guests on lxc:/// URI...
Resuming guest lxc-shell: already active

Configuration used for generating the examples above:
URIS='default lxc:/// xen:/// vbox+tcp://orkuz/system'

The script uses /var/lib/libvirt/libvirt-guests files to note all active
guest it should try to resume on next boot. It's content looks like:

default 7f8b9d93-30e1-f0b9-47a7-cb408482654b 085b4c95-5da2-e8e1-712f-6ea6a4156af2 fb4d8360-5305-df3a-2da1-07d682891b8c
lxc:/// 9cba8bfb-56f4-6589-2d12-8a58c886dd3b
2010-05-21 09:33:30 +02:00
Stefan Berger
beccb0deca rpmbuild: add ebtables & ip(6)tables dependency for rpm
Add ebtables,iptables & iptables-ipv6 dependency to rpm.

Changes from V1 to V2:
  -passing --without-libpcap to configure script, if libpcap is not to be used
2010-05-05 12:20:28 -04:00
Daniel Veillard
7efa3937f0 Various fixes for the spec file
This includes various things:
 - fix the Requires: libvirt-client to use %{name} to allow easy
   renaming
 - when building ESX support one need libcurl-devel
 - remove Makefile[.in] from xml/nwfilter in the docs, as this breaks
   parallel install ation of i686 and x86_64 packages
 - don't include nwfilter config files if not building with the daemon
all relatively trivial which is why I packed them together
* libvirt.spec.in: fix various small bugs
2010-05-04 16:13:55 +02:00
Daniel Veillard
5d65d32f2c Release of libvirt-0.8.1
* configure.ac docs/news.html.in libvirt.spec.in: updates for release
* po/*.po*: updated localizations and regenerated
2010-04-30 18:55:08 +02:00
Daniel Veillard
4e041189f8 Move dnsmasq host file to a separate directory
use /var/lib/libvirt/dnsmasq since /var/lib/libvirt/network is
unreadable by the dnsmasq binary

* src/network/bridge_driver.c: update DNSMASQ_STATE_DIR
* src/Makefile.am: create it on make install
* libvirt.spec.in: take the new directory into account
2010-04-28 15:53:09 +02:00
Daniel P. Berrange
f6770e8665 Run test suite as part of RPM build process
To ensure that patches in the RPM don't break any functionality
it is neccessary to run the test suites during build. It currently
has 3 tests disabled

 - daemon-conf: this is totally broken, since it relies on
   being able to resolve the 'libvirt' group & being able to
   resolve hostnames at daemon startup. This isn't possible
   in a mock build root
 - seclabeltest: fails to initialize selinux in the mock
   build root. Possibly fixable
 - nodeinfotest: broken on s390 + ppc - this is a real bug

* libvirt.spec.in: Add a %check section, with 3 tests
   temporarily disabled
2010-04-15 17:56:06 +01:00
Daniel Berteaud
505242f817 Fix spec file for builds without lxc
* libvirt.spec.in: fix a cut and paste error
2010-04-13 10:40:21 +02:00
Daniel Veillard
bfcca58787 Release of libvirt-0.8.0
* configure.ac docs/news.html.in libvirt.spec.in src/libvirt_public.syms:
  updates for release of 0.8.0
* po/*.po po/libvirt.pot: updated a lar set of localizations, and merge
  the messages
2010-04-12 19:39:20 +02:00
Stefan Berger
3bf24abc8c nwfilter: Support for learning a VM's IP address
This patch implements support for learning a VM's IP address. It uses
the pcap library to listen on the VM's backend network interface (tap)
or the physical ethernet device (macvtap) and tries to capture packets
with source or destination MAC address of the VM and learn from DHCP
Offers, ARP traffic, or first-sent IPv4 packet what the IP address of
the VM's interface is. This then allows to instantiate the network
traffic filtering rules without the user having to provide the IP
parameter somewhere in the filter description or in the interface
description as a parameter. This only supports to detect the parameter
IP, which is for the assumed single IPv4 address of a VM. There is not
support for interfaces that may have multiple  IP addresses (IP
aliasing) or IPv6 that may then require more than one valid IP address
to be detected. A VM can have multiple independent interfaces that each
uses a different IP address and in that case it will be attempted to
detect each one of the address independently.

So, when for example an interface description in the domain XML has
looked like this up to now:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'>
        <parameter name='IP' value='10.2.3.4'/>
      </filterref>
    </interface>

you may omit the IP parameter:

    <interface type='bridge'>
      <source bridge='mybridge'/>
      <model type='virtio'/>
      <filterref filter='clean-traffic'/>
    </interface>

Internally I am walking the 'tree' of a VM's referenced network filters
and determine with the given variables which variables are missing. Now,
the above IP parameter may be missing and this causes a libvirt-internal
thread to be started that uses the pcap library's API to listen to the
backend interface  (in case of macvtap to the physical interface) in an
attempt to determine the missing IP parameter. If the backend interface
disappears the thread terminates assuming the VM was brought down. In
case of a macvtap device a timeout is being used to wait for packets
from the given VM (filtering by VM's interface MAC address). If the VM's
macvtap device disappeared the thread also terminates. In all other
cases it tries to determine the IP address of the VM and will then apply
the rules late on the given interface, which would have happened
immediately if the IP parameter had been explicitly given. In case an
error happens while the firewall rules are applied, the VM's backend
interface is 'down'ed preventing it to communicate. Reasons for failure
for applying the network firewall rules may that an ebtables/iptables
command failes or OOM errors. Essentially the same failure reasons may
occur as when the firewall rules are applied immediately on VM start,
except that due to the late application of the filtering rules the VM
now is already running and cannot be hindered anymore from starting.
Bringing down the whole VM would probably be considered too drastic.
While a VM's IP address is attempted to be determined only limited
updates to network filters are allowed. In particular it is prevented
that filters are modified in such a way that they would introduce new
variables.

A caveat: The algorithm does not know which one is the appropriate IP
address of a VM. If the VM spoofs an IP address in its first ARP traffic
or IPv4 packets its filtering rules will be instantiated for this IP
address, thus 'locking' it to the found IP address. So, it's still
'safer' to explicitly provide the IP address of a VM's interface in the
filter description if it is known beforehand.

* configure.ac: detect libpcap
* libvirt.spec.in: require libpcap[-devel] if qemu is built
* src/internal.h: add the new ATTRIBUTE_PACKED define
* src/Makefile.am src/libvirt_private.syms: add the new modules and symbols
* src/nwfilter/nwfilter_learnipaddr.[ch]: new module being added
* src/nwfilter/nwfilter_driver.c src/conf/nwfilter_conf.[ch]
  src/nwfilter/nwfilter_ebiptables_driver.[ch]
  src/nwfilter/nwfilter_gentech_driver.[ch]: plu the new functionality in
* tests/nwfilterxml2xmltest: extend testing
2010-04-07 23:12:21 +02:00
Stefan Berger
8cf0ed02be nwfilter: Add filter schema for nwfilter XML, extend domain XML schema
This patch adds a relaxng nwfilter schema along with a test that
verifies all the test output XML against the schema. The input XMLs
contain a lot of intentional out-of-range values that make them fail the
schema verification, so I am not verifying against those.
2010-04-06 11:09:46 -04:00
Eric Blake
a792bf240f build: more fallout from test -a
* cfg.mk (sc_prohibit_test_minus_ao): Also check for [.
* docs/Makefile.am (%.html, html/index.html): Avoid non-portable
test usage.
* libvirt.spec.in (%post): Likewise.
* tools/virt-pki-validate.in (servercert.pem): Likewise.
* configure.ac (LOGNAME): Use test, not [, in files processed by
autoconf.
Detected by Matthias Bolte.
2010-03-31 15:18:13 -06:00
Daniel Veillard
b4b0949dd7 Distribute nwfilter xml files and add them to rpm
* examples/xml/nwfilter/Makefile.am: add all xml to the distribution
* libvirt.spec.in: reference them from the rpm spec file to have them
  available in the main libvirt package
2010-03-31 10:20:22 +02:00
Daniel Veillard
e7d29e234c Fix logroate rpm build breakage
related to fix of bug https://bugzilla.redhat.com/show_bug.cgi?id=547514
2010-03-18 13:50:08 +01:00
Daniel Veillard
89bf843a6d Change logrotate to be per-hypervisor logs
Having a single logrotate configuration file for all hypervisors
did not work as logrotate would get confused if an hypervisor not
supported on that platform was still listed. Simplest is to split
the logrotate as separate per hypervisor files and change the
spec file to only install the ones compiled in.
* daemon/libvirtd.lxc.logrotate.in daemon/libvirtd.qemu.logrotate.in
  daemon/libvirtd.uml.logrotate.in: copy and split the original
  daemon/libvirtd.logrotate.in file
* daemon/Makefile.am: update to support the different files and
  cleanup in sed suggested by Eric Blake
* libvirt.spec.in: only install the relevant logrotate configs
* daemon/.gitignore: update logrotate generated list
2010-03-10 11:27:02 +01:00
Daniel Veillard
703c165188 Release of libvirt-0.7.7
* configure.ac libvirt.spec.in: update with new version
* docs/news.html.in: add list of changes in 0.7.7
* po/*po*: updated spanish and russian localisations, rebuilt
2010-03-05 17:10:21 +01:00
David Allan
b2111ba3cd Revert fs pool formatting
* We are reverting this patch pending a discussion of the right way to implement.
2010-02-26 03:33:27 -05:00
Dave Allan
b738016b78 Format FS pools on creation
Create the filesystem on the partition used by the pool
* configure.ac: check for mkfs availability
* libvirt.spec.in: add extra require on util-linux for mkfs
* src/storage/storage_backend_fs.c: run mkfs with the expected
  fs type when creating a filesystem pool
2010-02-24 09:51:34 +01:00
Daniel Veillard
31a5ee922a Release of libvirt-0.7.6
* configure.ac docs/news.html.in libvirt.spec.in: version bump and doc
  updates
* po/*.po*: updated and regenerated the localizations
2010-02-03 18:16:25 +01:00