This format is used by the storage driver and other hypervisors but qemu
does not have notion of the 'iso' format and libvirt does not translate
it to anything useful, so it would not work anyways. Users should use
'raw' instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
This is a storage driver type, which is not handled in qemu driver
properly. For accessing directories, disk type 'dir' is used instead.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
The function docs state that 'strcontent' may be NULL. This was added in
8b3a0b28ba but that commit neglected to fix rest of the function.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
It was not possible to determine whether virJSONValueObjectAddVArgs and
the functions using it would consume a virJSONValue or not when used
with the 'a' or 'A' modifier depending on when the loop failed.
Fix this by passing in a pointer to the pointer so that it can be
cleared once it's successfully consumed and the callers don't have to
second-guess leaving a chance of leaking or double freeing the value
depending on the ordering.
Fix all callers to pass a double pointer too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Scan the parsed VMX file, and gather the biggest index of the network
interfaces there: this way, it is possible to parse all the available
network interfaces, instead of just 4 maximum.
Add the VMX file attached to RHBZ#1560917 as testcase esx-in-the-wild-8.
https://bugzilla.redhat.com/show_bug.cgi?id=1560917
Signed-off-by: Pino Toscano <ptoscano@redhat.com>
When GIC support was introduced (QEMU 2.6 timeframe) we needed
to make sure both GICv2 hardware and GICv3 hardware were handled
correctly, and that was achieved by having separate capabilities
data for each.
Now that we have capabilities data for several QEMU versions we
can stop storing data for GICv2 and GICv3 hardware separately,
and instead have GICv2 data for QEMU <= 2.10 and GICv3 data for
QEMU >= 2.12, without losing any coverage.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Test cases in qemucapabilitiestest are ordered by architecture
first, then by QEMU version. Use the same order here.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
So build the qemu command line for ccw devices.
Also add test cases for virtio-{keyboard, mouse, tablet}-ccw.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio input ccw devices.
Introduce qemu capabilities for these devices.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
S390 guests can only support a virtio-gpu-ccw device as a video
device. So set default video model type to VIR_DOMAIN_VIDEO_TYPE_VIRTIO
for S390 guests.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support the virtio-gpu-ccw device,
which can be used as a video device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
QEMU on S390 (since v2.11) can support virtio-gpu-ccw device.
Let's introduce a new qemu capability for the device.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1558317
Similarly to b133fac356 we need to look up alias of CCID
controller when constructing smartcard command line instead of
relying on broken assumption it will always be 'ccid0'. After
user aliases it can be anything.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'simple' monitor tests were quite useless, since the code did not
even check whether the correct command was called.
This patch uses the QAPI schema validator to validate that the arguments
are in format according to the schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add infrastructure that will allow testing schema of the commands we
pass to the fake monitor object, so that we can make sure that it
actually does something.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Prepare for testing of the schema of used commands by changing few
arguments to values which will not be rejected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add a function which will allow to test whether a JSON object conforms
to the QAPI schema. This greatly helps when developing formatters for
new JSON objects and will help make sure that the code will not break in
cases which have unit tests but were actually not function-tested
(mostly various disk access protocols).
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add the QAPI schema (returned by 'query-qmp-schema' command) which will
be used for QAPI schema testing in upcoming patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
So far the virt-aa-helper tests only checked the return code and thereby
catched aborts like issues failing to parse the XML. But there is one
category of virt-aa-helper issues so far untested - not generating the
expected rule.
This adds a basic grep based checks after each test to match against the
rule that is expected to be added by the test.
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
nvdimm memory is backed by a path on the host. This currently works only via
hotplug where the AppArmor label is created via the domain label callbacks.
This adds the virt-aa-helper support for nvdimm memory devices to generate
rules for the needed paths from the initial guest definition as well.
Example in domain xml:
<memory model='nvdimm'>
<source>
<path>/tmp/nvdimm-base</path>
</source>
<target>
<size unit='KiB'>524288</size>
<node>0</node>
</target>
</memory>
Works to start now and creates:
"/tmp/nvdimm-base" rw,
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1757085
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Input devices can passthrough an event device. This currently works only via
hotplug where the AppArmor label is created via the domain label callbacks.
This adds the virt-aa-helper support for passthrough input devices to generate
rules for the needed paths from the initial guest definition as well.
Example in domain xml:
<input type='passthrough' bus='virtio'>
<source evdev='/dev/input/event0' />
</input>
Works to start now and creates:
"/dev/input/event0" rw,
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1757085
Acked-by: Jamie Strandboge <jamie@canonical.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Long ago in commit dfa1e1dd53 the scheduler weight was accidentally
hardcoded to 1000. Weight is a setting with no unit since it is
relative to the weight of other domains. If no weight is specified,
libxl defaults to 256.
Instead of hardcoding the weight to 1000, honor any <shares> specified
in <cputune>. libvirt's notion of shares is synonomous to libxl's
scheduler weight setting. If shares is unspecified, defer default
weight setting to libxl.
Removing the hardcoded weight required some test fixup. While at it,
add an explicit test for <shares> conversion to scheduler weight.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
The QEMU binary is compiled from the v2.12.0-rc0 tag.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
We're going to use the same test case to exercise all optional
pSeries features, so a more generic name is needed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: John Ferlan <jferlan@redhat.com>
Replace the print statement, that is only available in Py2, with a
print function that is available in both Py2 and Py3 and drop the
explicit python version in the shebang.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Radostin Stoyanov <rstoyanov1@gmail.com>
PEP8 recommends not having spaces around = in a keyword argument or
a default parameter value.
https://www.python.org/dev/peps/pep-0008/#other-recommendations
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Radostin Stoyanov <rstoyanov1@gmail.com>
<memballoon model='none'/> is the only way to disable balloon driver
since libvirt will add one automatically if the memballoon element is
missing. In other words, there's no balloon device if model is 'none'
and generating an alias for it makes no sense. The alias will be ignored
when parsing the XML and it will disappear once libvirtd is restarted.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1552127
When building command line for USB controllers we have to do more
than just put controller's alias onto the command line. QEMU has
concept of these joined USB controllers. For instance ehci and
uhci controllers need to create the same USB bus. To achieve that
the slave controller needs to refer the master controller. This
worked until we've introduced user aliases because both master
and slave had the same alias. With user aliases slave can have
different alias than master. Therefore, when generating command
line for slave we need to look up the master's alias.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some fields reported by dmidecode have plenty of useless spaces
(in fact some have nothing but spaces). To deal with this we have
introduced virSkipSpacesBackwards() and use it in
virSysinfoParseX86Processor() and virSysinfoParseX86Memory().
However, other functions (e.g. virSysinfoParseX86Chassis()) don't
use it at all and thus we are reporting nonsense:
<sysinfo type='smbios'>
<chassis>
<entry name='manufacturer'>FUJITSU</entry>
<entry name='version'> </entry>
<entry name='serial'> </entry>
<entry name='asset'> </entry>
<entry name='sku'>Default string</entry>
</chassis>
</sysinfo>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 99e30acfdc added 'qemustatusxml2xmloutdata' to EXTRA_DIST but
the directory added in the commit is called 'qemustatusxml2xmldata'
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Add new approach to properly test status XML files by supplying a full
XML file rather than generating synthetic test cases by prepending the
status header. The two tests introduced here are copies of existing
cases using the synthetic header so that current level of testing is
kept. The files are chosen to excercising the vcpu and blockjob quirks
present in the current testing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
We have a test of the domain XML that allows format detection, so
there's no need to do it for snapshot XMLs where the parameter would
influence the domain XML portion.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Nobody should use format detection due to security implications. The
result of the change is that 'raw' format will be printed unless
specified explicitly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Clang 6.0.0 complains when initializing structure with { NULL }:
conf/domain_addr.c:1494:38: error: missing field 'type' initializer [-Werror,-Wmissing-field-initializers]
virDomainDeviceInfo nfo = { NULL };
Use { 0 } instead to make it happy.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This time around it's not enough to just pick the latest commit,
because with aed87bb2aa6ed83b49574eb982e3bdd4c36acf17 keycodemapdb
renamed the 'rfb' keycode to 'qnum' and we need to accept the new
name while maintaining backwards compatibility.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
