A helper that will execute a callback on every USB device
in the domain definition.
With an ability to skip USB hubs, since we will want to treat
them differently in some cases.
virTypedParameterAssign steals the string rather than copying it into
the typed parameter and thus freeing it leads to a crash when attempting
to serialize the results.
This was introduced in commit 9f50f6e2 and later made an universal
helper in 32e6339c.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1351473
Some code paths already assume that it is allocated since it was always
allocated by virDomainPerfDefParseXML. Make it member of virDomainDef
directly so that we don't have to allocate it all the time.
This fixes crash when attempting to connect to an existing process via
virDomainQemuAttach since we would not allocate it in that code path.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1350688
This is place as a sub-element of <source>, where other aspects of the
host-side connection to the network device are located (network or
bridge name, udp listen port, etc). It's a bit odd that the interface
we're configuring with this info is itself named in <target dev='x'/>,
but that ship sailed long ago:
<interface type='ethernet'>
<mac address='00:16:3e:0f:ef:8a'/>
<source>
<ip address='192.168.122.12' family='ipv4'
prefix='24' peer='192.168.122.1'/>
<ip address='192.168.122.13' family='ipv4' prefix='24'/>
<route family='ipv4' address='0.0.0.0'
gateway='192.168.122.1'/>
<route family='ipv4' address='192.168.124.0' prefix='24'
gateway='192.168.124.1'/>
</source>
</interface>
In practice, this will likely only be useful for type='ethernet', so
its presence in any other type of interface is currently forbidden in
the generic device Validate function (but it's been put into the
general population of virDomainNetDef rather than the
ethernet-specific union member so that 1) we can more easily add the
capability to other types, and 2) we can retain the info when set to
an invalid interface type all the way through to validation and report
a proper error, rather than just ignoring it (which is currently what
happens for many other type-specific settings).
(NB: The already-existing configuration of IP info for the guest-side
of interfaces is in subelements directly under <interface>, and the
name of the guest-side interface (when configurable) is in <guest
dev='x'/>).
The peer attribute is used to set the property of the same name in the
interface IP info:
<interface type='ethernet'>
...
<ip family='ipv4' address='192.168.122.5'
prefix='32' peer='192.168.122.6'/>
...
</interface>
Note that this element is used to set the IP information on the
*guest* side interface, not the host side interface - that will be
supported in an upcoming patch.
(This is an updated *re*-commit of commit 690969af, which was
subsequently reverted in commit 1d14b13f).
Signed-off-by: Vasiliy Tolstov <v.tolstov@selfip.ru>
Signed-off-by: Laine Stump <laine@laine.org>
virDomainNetIPInfoParseXML() and virDomainNetIPInfoFormat() are no
longer "unused", so we can now remove the "ATTRIBUTE_UNUSED" from
their definitions, since virDomainNetIPInfoFormat() is now the only
caller of virDomainNetIPsFormat() and virDomainNetRoutesFormat(),
those two functions can simply be subsumed into
virDomainNetIPInfoFormat().
a.k.a. <hostdev mode='capabilities' type='net'>.
This replaces the existing nips, ips, nroutes, and routes with a
single virNetDevIPInfo, and simplifies the code by calling that
object's parse/format/clear functions instead of open coding.
There are currently two places in the domain where this combination is
used, and there is about to be another. This patch puts them together
for brevity and uniformity.
As with the newly-renamed virNetDevIPAddr and virNetDevIPRoute
objects, the new virNetDevIPInfo object will need to be accessed by a
utility function that calls low level Netlink functions (so we don't
want it to be in the conf directory) and will be called from multiple
hypervisor drivers (so it can't be in any hypervisor directory); the
most appropriate place is thus once again the util directory.
The parse and format functions are in conf/domain_conf.c because only
the domain XML (i.e. *not* the network XML) has this exact combination
of IP addresses plus routes. Note that virDomainNetIPInfoFormat() will
end up being the only caller to virDomainNetRoutesFormat() and
virDomainNetIPsFormat(), so it will just subsume those functions in a
later patch, but we can't do that until they are no longer called.
(It would have been nice to include the interface name within the
virNetDevIPInfo object (with a slight name change), but that can't
be done cleanly, because in each case the interface name is provided
in a different place in the XML relative to the routes and IP
addresses, so putting it in this object would actually make the code
more confused rather than simpler).
These functions all need to be called from a utility function that
must be located in the util directory, so we move them all into
util/virnetdevip.[ch] now that it exists.
Function and struct names were appropriately changed for the new
location, but all code is unchanged aside from motion and renaming.
When support for <interface type='ethernet'> was added in commit
9a4b705f back in 2010, it erroneously looked at <source dev='blah'/>
for a user-specified guest-side interface name. This was never
documented though. (that attribute already existed at the time in the
data.ethernet union member of virDomainNetDef, but apparently had no
practical use - it was only used as a storage place for a NetDef's
bridge name during qemuDomainXMLToNative(), but even then that was
never used for anything).
When support for similar guest-side device naming was added to the lxc
driver several years later, it was put in a new subelement <guest
dev='blah'/>.
In the intervening years, since there was no validation that
ethernet.dev was NULL in the other drivers that didn't actually use
it, innocent souls who were adding other features assuming they needed
to account for non-NULL ethernet.dev when really they didn't, so
little bits of the usual pointless cargo-cult code showed up.
This patch not only switches the openvz driver to use the documented
<guest dev='blah'/> notation for naming the guest-side device (just in
case anyone is still using the openvz driver), and logs an error if
anyone tries to set <source dev='blah'/> for a type='ethernet'
interface, it also removes the cargo-cult uses of ethernet.dev and
<source dev='blah'/>, and eliminates if from the RNG and from
virDomainNetDef.
NB: I decided on this course of action after mentioning the
inconsistency here:
https://www.redhat.com/archives/libvir-list/2016-May/msg02038.html
and getting encouragement do eliminate it in a later IRC discussion
with danpb.
Rearrange this function to be better organized and more correct:
* the error codes were changed from the incorrect INVALID_ARG to
XML_ERROR
* prefix still isn't required, but if present it must be valid or an
error will be logged.
* don't emit a debug log just because prefix is missing - this
is valid.
* group everything related to setting prefix in one place rather than
scattered through the function.
I'm tired of mistyping this all the time, so let's do it the same all
the time (similar to how we changed all "Pci" to "PCI" awhile back).
(NB: I've left alone some things in the esx and vbox drivers because
I'm unable to compile them and they weren't obviously *not* a part of
some API. I also didn't change a couple of variables named,
e.g. "somethingIptables", because they were derived from the name of
the "iptables" command)
These had been declared in conf/device_conf.h, but then used in
util/virnetdev.c, meaning that we had to #include conf/device_conf.h
in virnetdev.c (which we have for a long time said shouldn't be done.
This caused a bigger problem when I tried to #include util/virnetdev.h
in a file in src/conf (which is allowed) - for some reason the
"device_conf.h: File not found" error.
The solution is to move the data types and functions used in util
sources from conf to util. Some names were adjusted during the move
("virInterface" --> "virNetDevIf", and "VIR_INTERFACE" -->
"VIR_NETDEV_IF")
The VIR_STORAGE_POOL_EVENT_REFRESHED constant does not
reflect any change in the lifecycle of the storage pool.
It should thus not be part of the storage pool lifecycle
event set, but rather be a top level event in its own
right. Thus we introduce VIR_STORAGE_POOL_EVENT_ID_REFRESH
to replace it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Disallowing them broke a use case of testing multipath configurations
for storage. Originally this was added as it was impossible to
use certain /dev/disk-by... links but the disks worked properly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1349895
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
This code was attempting to handle some implicit <console> XML
formatting for manually assembled DomainDef, since previously the
console<->serial compat copying was only done at XML parse time.
Nowadays it's done via virDomainDefPostParse ->
virDomainDefAddConsoleCompat, which all manual DomainDef builders
already call, so we can drop this workaround.
In the case of chassisNr (used to set chassis_nr of a pci-bridge
controller), 0 is reserved for / used by the pci[e]-root bus. In the
base of busNr, a value of 0 would mean that the root bus had no places
available to plug in new buses, including the pxb itself (the
documentation I wrote for pxb even noted the limit of busNr as 1.254).
NB: oddly, the "chassis" attribute, which is used for pcie-root-port
and pcie-switch-downstream-port *can* be set to 0, since it's the
combination of {chassis, slot} that needs to be unique, not chassis by
itself (and slot 0 of pcie-root is reserved, while pcie-*-port can use
*only* slot 0).
This resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1342962
When loading status XMLs with following graphics definition:
<graphics type='spice' port='5900' autoport='yes' listen='127.0.0.1'>
<listen type='address' address='127.0.0.1' fromConfig='1'/>
<image compression='off'/>
</graphics>
libvirtd would leak a few bytes:
10 bytes in 1 blocks are definitely lost in loss record 71 of 1,127
at 0x4C2C000: malloc (vg_replace_malloc.c:299)
by 0x6789298: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
by 0x552AB0A: virXMLPropString (virxml.c:479)
by 0x5539536: virDomainGraphicsListensParseXML (domain_conf.c:11171)
by 0x553DD5E: virDomainGraphicsDefParseXMLSpice (domain_conf.c:11414)
by 0x553DD5E: virDomainGraphicsDefParseXML (domain_conf.c:11749)
by 0x5566061: virDomainDefParseXML (domain_conf.c:16939)
by 0x556953F: virDomainObjParseXML (domain_conf.c:17348)
by 0x556953F: virDomainObjParseNode (domain_conf.c:17513)
by 0x5569902: virDomainObjParseFile (domain_conf.c:17532)
by 0x5571E02: virDomainObjListLoadStatus (virdomainobjlist.c:514)
by 0x5571E02: virDomainObjListLoadAllConfigs (virdomainobjlist.c:596)
by 0x26E0BDC8: qemuStateInitialize (qemu_driver.c:911)
by 0x55B1FDB: virStateInitialize (libvirt.c:770)
by 0x122039: daemonRunStateInit (libvirtd.c:960)
This is going to be important later when we received
DEVICE_DELETED event on the qemu monitor. If we do,
virDomainDefFindDevice() is called to find the device for given
device alias in the virDomainDef tree. When we enable removal for
redirdevs we need to include them in the lookup process too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Basically, there are just two functions introduced here:
virDomainRedirdevDefFind which looks up given redirdev in domain
definition, and virDomainRedirdevDefRemove which removes the
device at given index in the array of devices.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's currently just one limitation: redirdevs that want to go
on USB bus require a USB controller, surprisingly.
At the same time, since I'm using virDomainDefHasUSB() in this
new validator function, it has to be moved a few lines up and
also its header needed to be changed a bit: it is now taking a
const pointer to domain def since it's not changing anything in
there.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
While we need to know the difference between the total memory stored in
<memory> and the actual size not included in the possible memory modules
we can't pre-calculate it reliably. This is due to the fact that
libvirt's XML is copied via formatting and parsing the XML and the
initial memory size can be reliably calculated only when certain
conditions are met due to backwards compatibility.
This patch removes the storage of 'initial_memory' and fixes the helpers
to recalculate the initial memory size all the time from the total
memory size. This conversion is possible when we also make sure that
memory hotplug accounts properly for the update of the total memory size
and thus the helpers for inserting and removing memory devices need to
be tweaked too.
This fixes a bug where a cold-plug and cold-remove of a memory device
would increase the size reported in <memory> in the XML by the size of
the memory device. This would happen as the persistent definition is
copied before attaching the device and this would lead to the loss of
data in 'initial_memory'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1344892
Implement storage pool event callbacks for START, STOP, DEFINE, UNDEFINED
and REFRESHED in functions when a storage pool is created/started/stopped
etc. accordingly
This option allows or disallows detection of zero-writes if it is set to
"on" or "off", respectively. It can be also set to "unmap" in which
case it will try discarding that part of image based on the value of the
"discard" option.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
