virDomainGetJobStats gains new VIR_DOMAIN_JOB_STATS_COMPLETED flag that
can be used to fetch statistics of a completed job rather than a
currently running job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Job statistics data were tracked in several structures and variables.
Let's make a new qemuDomainJobInfo structure which can be used as a
single source of statistics data as a preparation for storing data about
completed a job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemu now checks for invalid address type for a panic device, which is
currently implemented only to use ISA address type, thus rejecting
any other options, except for leaving XML attributes blank, in that case,
defaults are used (this behaviour remains the same from earlier verions).
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1138125
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
When QEMU fails during incoming migration after we successfully started
it (i.e., during Perform or Finish phase), we report a rather unhelpful
message
Unable to read from monitor: Connection reset by peer
We already have a code that takes error messages from QEMU's error
output but we disable it once QEMU successfully starts. This patch
postpones this until the end of Finish phase during incoming migration
so that we can report a much better error message:
internal error: early end of file from monitor: possible problem:
Unknown savevm section or instance '0000:00:05.0/virtio-balloon' 0
load of migration failed
https://bugzilla.redhat.com/show_bug.cgi?id=1090093
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Return failure right away when the domain object can't be looked up
instead of jumping to cleanup. This allows to remove the condition
before unlocking the domain object.
The code would lookup the snapshot object before acquiring the job. This
could lead to a crash as one thread could delete the snapshot object,
while a second thread already had the reference.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Creating snapshots modifies the domain state. Currently we wouldn't
enter the job for certain operations although they would modify the
state. Refactor job handling so that everything is covered by an async
job.
To date, anyone performing a block copy and pivot ends up with
the destination being treated as <disk type='file'>. While this
works for data access for a block device, it has at least one
noticeable shortcoming: virDomainGetBlockInfo() reports allocation
differently for block devices visited as files (the size of the
device) than for block devices visited as <disk type='block'>
(the maximum sector used, as reported by qemu); and this difference
is significant when trying to manage qcow2 format on block devices
that can be grown as needed.
Of course, the more powerful virDomainBlockCopy() API can already
express the ability to set the <disk> type. But a new API can't
be backported, while a new flag to an existing API can; and it is
also rather inconvenient to have to resort to the full power of
generating XML when just adding a flag to the older call will do
the trick. So this patch enhances blockcopy to let the user flag
when the resulting XML after the copy must list the device as
type='block'.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_BLOCK_REBASE_COPY_DEV):
New flag.
* src/libvirt.c (virDomainBlockRebase): Document it.
* tools/virsh-domain.c (opts_block_copy, blockJobImpl): Add
--blockdev option.
* tools/virsh.pod (blockcopy): Document it.
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Allow new flag.
(qemuDomainBlockCopy): Remember the flag, and make sure it is only
used on actual block devices.
* tests/qemuxml2argvdata/qemuxml2argv-disk-mirror.xml: Test it.
Signed-off-by: Eric Blake <eblake@redhat.com>
While reviewing the new virDomainBlockCopy API, Peter Krempa
pointed out that our existing design of using MiB/s for block
job bandwidth is rather coarse, especially since qemu tracks
it in bytes/s; so virDomainBlockCopy only accepts bytes/s.
But once the new API is implemented for qemu, we will be in
the situation where it is possible to set a value that cannot
be accurately reflected back to the user, because the existing
virDomainGetBlockJobInfo defaults to the coarser units.
Fortunately, we have an escape hatch; and one that has already
served us well in the past: we can use the flags argument to
specify which scale to use (see virDomainBlockResize for prior
art). This patch fixes the query side of the API; made easier
by previous patches that split the query side out from the
modification code. Later patches will address the virsh
interface, as well retrofitting all other blockjob APIs to
also accept a flag for toggling bandwidth units.
* include/libvirt/libvirt.h.in (_virDomainBlockJobInfo)
(VIR_DOMAIN_BLOCK_COPY_BANDWIDTH): Document sizing issues.
(virDomainBlockJobInfoFlags): New enum.
* src/libvirt.c (virDomainGetBlockJobInfo): Document new flag.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJobInfo): Add parameter.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJobInfo): Likewise.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJobInfo):
Likewise.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJobInfo)
(qemuMonitorJSONGetBlockJobInfoOne): Likewise. Don't scale here.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror): Update
callers.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl): Likewise.
(qemuDomainGetBlockJobInfo): Likewise, and support new flag.
Signed-off-by: Eric Blake <eblake@redhat.com>
The previous patch hoisted some bounds checks to the callers;
but someone that is not aware of the hoisted check could now
try passing an integer between LLONG_MAX and ULLONG_MAX. As a
safety measure, add new json conversion modes that let libvirt
error out early instead of pass bad numbers to qemu, if the
caller ever makes a mistake due to later refactoring.
Convert the various blockjob QMP calls to use the new modes,
and switch some of them to be optional (QMP has always supported
an omitted "speed" the same as "speed":0, for everything except
block-job-set-speed).
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMakeCommandRaw):
Add 'j'/'y' and 'J'/'Y' to error out on negative input.
(qemuMonitorJSONDriveMirror, qemuMonitorJSONBlockCommit)
(qemuMonitorJSONBlockJob): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
qemu treats blockjob bandwidth as a 64-bit number, in the units
of bytes/second. But we stupidly modeled block job bandwidth
after migration bandwidth, which in turn was an 'unsigned long'
and therefore subject to 32-bit vs. 64-bit interpretations, and
with a scale of MiB/s. Our code already has to convert between
the two scales, and report overflow as appropriate; although
this conversion currently lives in the monitor code. In fact,
our conversion code limited things to 63 bits, because we
checked against LLONG_MAX and reject what would be negative
bandwidth if treated as signed.
On the bright side, our use of MiB/s means that even with a
32-bit unsigned long, we still have no problem representing a
bandwidth of 2GiB/s, which is starting to be more feasible as
10-gigabit or even faster interfaces are used. And once you
get past the physical speeds of existing interfaces, any larger
bandwidth number behaves the same - effectively unlimited.
But on the low side, the granularity of 1MiB/s tuning is rather
coarse. So the new virDomainBlockJob API decided to go with
a direct 64-bit bytes/sec number instead of the scaled number
that prior blockjob APIs had used. But there is no point in
rounding this number to MiB/s just to scale it back to bytes/s
for handing to qemu.
In order to make future code sharing possible between the old
virDomainBlockRebase and the new virDomainBlockCopy, this patch
moves the scaling and overflow detection into the driver code.
Several of the block job calls that can set speed are fed
through a common interface, so it was easier to adjust all block
jobs at once, for consistency. This patch is just code motion;
there should be no user-visible change in behavior.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Change
parameter type and scale.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob)
(qemuMonitorBlockCommit, qemuMonitorDriveMirror): Move scaling
and overflow detection...
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl)
(qemuDomainBlockRebase, qemuDomainBlockCommit): ...here.
(qemuDomainBlockCopy): Use bytes/sec.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another layer of overly-multiplexed code that deserves to be
split into obviously separate paths for query vs. modify.
This continues the cleanup started in commit cefe0ba.
In the process, make some tweaks to simplify the logic when
parsing the JSON reply. There should be no user-visible
semantic changes.
* src/qemu/qemu_monitor.h (qemuMonitorBlockJob): Drop parameter.
(qemuMonitorBlockJobInfo): New prototype.
(BLOCK_JOB_INFO): Drop enum.
* src/qemu/qemu_monitor_json.h (qemuMonitorJSONBlockJob)
(qemuMonitorJSONBlockJobInfo): Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorBlockJob): Split...
(qemuMonitorBlockJobInfo): ...into second function.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONBlockJob): Move
block info portions...
(qemuMonitorJSONGetBlockJobInfo): ...here, and rename...
(qemuMonitorJSONBlockJobInfo): ...and export.
(qemuMonitorJSONGetBlockJobInfoOne): Alter return semantics.
* src/qemu/qemu_driver.c (qemuDomainBlockPivot)
(qemuDomainBlockJobImpl, qemuDomainGetBlockJobInfo): Adjust
callers.
* src/qemu/qemu_migration.c (qemuMigrationDriveMirror)
(qemuMigrationCancelDriveMirror): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The qemu implementation for virDomainGetBlockJobInfo() has a
minor bug: it grabs the qemu job with intent to QEMU_JOB_MODIFY,
which means it cannot be run in parallel with any other
domain-modifying command. Among others, virDomainBlockJobAbort()
is such a modifying command, and it defaults to being
synchronous, and can wait as long as several seconds to ensure
that the job has actually finished. Due to the job rules, this
means a user cannot obtain status about the job during that
timeframe, even though we know that some client management code
exists which is using a polling loop on status to see when a job
finishes.
This bug has been present ever since blockpull support was first
introduced (commit b976165, v0.9.4 in Jul 2011), all because we
stupidly tried to cram too much multiplexing through a single
helper routine, but was made worse in 97c59b9 (v1.2.7) when
BlockJobAbort was fixed to wait longer. It's time to disentangle
some of the mess in qemuDomainBlockJobImpl, and in the process
relax block job query to use QEMU_JOB_QUERY, since it can safely
be used in parallel with any long running modify command.
Technically, there is one case where getting block job info can
modify domain XML - we do snooping to see if a 2-phase job has
transitioned into the second phase, for an optimization in the
case of old qemu that lacked an event for the transition. I
claim this optimization is safe (the jobs are all about modifying
qemu state, not necessarily xml state); but if it proves to be
a problem, we could use the difference between the capabilities
QEMU_CAPS_BLOCKJOB_{ASYNC,SYNC} to determine whether we even
need snooping, and only request a modifying job in the case of
older qemu.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Move info
handling...
(qemuDomainGetBlockJobInfo): ...here, and relax job type.
(qemuDomainBlockJobAbort, qemuDomainBlockJobSetSpeed)
(qemuDomainBlockRebase, qemuDomainBlockPull): Adjust callers.
Signed-off-by: Eric Blake <eblake@redhat.com>
The existing virDomainBlockRebase code rejected the combination of
_RELATIVE and _COPY flags, but only by accident. It makes sense
to add support for the combination someday, at least for the case
of _SHALLOW and not _REUSE_EXT; but to implement it, libvirt would
have to pre-create the file with a relative backing name, and I'm
not ready to code that in yet.
Meanwhile, the code to forward on to the block copy code is getting
longer, and reorganizing the function to have the block pull done
early makes it easier to add even more block copy prep code.
This patch should have no semantic difference other than the quality
of the error message on the unsupported flag combination. Pre-patch:
error: unsupported flags (0x10) in function qemuDomainBlockCopy
Post-patch:
error: argument unsupported: Relative backing during copy not supported yet
* src/qemu/qemu_driver.c (qemuDomainBlockRebase): Reorder code,
and improve error message of relative copy.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.
Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11https://bugzilla.novell.com/show_bug.cgi?id=888166
To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0
srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock
Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Currently, there is one flag passed in during macvtap creation
(withTap) -- Let's convert this field to an unsigned int flag
field for future expansion.
Signed-off-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In qemuDomainSnapshotCreateDiskActive() if we jumped to cleanup from a
failed actions = virJSONValueNewArray(), then 'cfg' would be NULL.
So just return -1, which in turn removes the need for cleanup:
For virtio-blk-pci disks with the disk iothread attribute that are
running the correct emulator, add the "iothread=iothread#" to the
-device command line in order to enable iothreads for the disk as
long as the command is available, the disk iothread value provided is
valid, and is supported for the disk device being added
Add a new capability to ensure the iothreads feature exists for the qemu
emulator being run - requires the "query-iothreads" QMP command. Using the
domain XML add correspoding command argument in order to generate the
threads. The iothreads will use a name space "iothread#" where, the
future patch to add support for using an iothread to a disk definition to
merely define which of the available threads to use.
Add tests to ensure the xml/argv processing is correct. Note that no
change was made to qemuargv2xmltest.c as processing the -object element
would require knowing more than just iothreads.
Implement the API function for virDomainListGetStats and
virConnectGetAllDomainStats in a modular way and implement the
VIR_DOMAIN_STATS_STATE group of statistics.
Although it may look like the function looks universal I'd rather not
expose it to other drivers as the coming stats groups are likely to do
qemu specific stuff to obtain the stats.
One useless warning, but the other one rather pertinent. On entry
the 'trans' variable is initialized to VIR_DOMAIN_DISK_TRANS_DEFAULT.
When the "trans" was found in the parsing loop it def->geometry.trans
was assigned to the return from virDomainDiskGeometryTransTypeFromString
and then 'trans' was used to do the comparison to see if it was valid.
So remove 'trans' and use def->geometry.trans properly
Coverity determined that on error path that 'mach' wouldn't be free'd
Since virCapabilitiesFreeGuestMachine() isn't globally available, we'll
insert first and then if the VIR_STRDUP's fail they it will eventually
cause the 'mach' to be freed in the error path
Coverity found that on error paths, the 'arg' value wasn't be cleaned
up. Followed the example in qemuAgentSetVCPUs() where upon successful call
to qemuAgentCommand() the 'cpus' is set to NULL; otherwise, when cleanup
occurs the free the memory for 'arg'
In function virQEMUCapsParseMachineTypesStr, VIR_STRNDUP allocates
memory for 'name' in {do,while} loop. If 'name' isn't freed before
'continue', its memory will be allocated again in the next loop.
In this case the memory allocated for 'name' in privious loop is
useless and not freed. Free it before continue this loop to fix that.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
In qemuNetworkIfaceConnect() a call to virNetDevBandwidthSet() is
made where the function prototype requires the first parameter
(net->ifname) to be non NULL. Coverity complains that the subsequent
non NULL check for net->ifname prior to the next call gets flagged as
an unnecessary check. Resolve by removing the extra check
In qemuDomainRevertToSnapshot(), it will check snap->def->state.
But when the state is PMSUSPENDED/NOSTATE/BLOCKED, it forgets to
call qemuDomainObjEndJob.
https://bugzilla.redhat.com/show_bug.cgi?id=1134154
Bug introduced in commit 1e833899.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Let's fix this before we bake in a painful API. Since we know
that we have exactly one non-negative fd on success, we might
as well return the fd directly instead of forcing the user to
pass in a pointer. Furthermore, I found some memory and fd
leaks while reviewing the code - the idea is that on success,
libvirtd will have handed two fds in two different directions:
one to qemu, and one to the RPC client.
* include/libvirt/libvirt.h.in (virDomainOpenGraphicsFD): Drop
unneeded parameter.
* src/driver.h (virDrvDomainOpenGraphicsFD): Likewise.
* src/libvirt.c (virDomainOpenGraphicsFD): Adjust interface to
return fd directly.
* daemon/remote.c (remoteDispatchDomainOpenGraphicsFd): Adjust
semantics.
* src/qemu/qemu_driver.c (qemuDomainOpenGraphicsFD): Likewise,
and plug fd leak.
* src/remote/remote_driver.c (remoteDomainOpenGraphicsFD):
Likewise, and plug memory and fd leak.
Signed-off-by: Eric Blake <eblake@redhat.com>
According to docs/schemas/domaincommon.rng and _virDomainBlockIoTuneInfo
all the iotune values are interpreted as unsigned long long, however
according to qemu_monitor_json.c, qemu silently truncates numbers
larger than LLONG_MAX. There's really not much of a usage for such
large numbers anyway yet. This patch provides the same overflow
check during a domain start as it does during setting
a blkdeviotune element in qemu_driver.c and thus reports an error when
a larger number than LLONG_MAX is detected.
https://bugzilla.redhat.com/show_bug.cgi?id=1131876
QEMU 2.1 added support for the kvm=off option to the -cpu command,
allowing the KVM hypervisor signature to be hidden from the guest.
This enables disabling of some paravirualization features in the
guest as well as allowing certain drivers which test for the
hypervisor to load. Domain XML syntax is as follows:
<domain type='kvm>
...
<features>
...
<kvm>
<hidden state='on'/>
</kvm>
</features>
...
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit b606bbb41 reminded me that any time we drop locks to run
back-to-back guest interaction commands, we have to check that
the guest didn't disappear in between the two commands. A quick
audit found a couple of spots that were missing this check.
* src/qemu/qemu_driver.c (qemuDomainShutdownFlags)
(qemuDomainSetVcpusFlags): Check that domain is still up.
Signed-off-by: Eric Blake <eblake@redhat.com>
The 'min_guarantee' is used by VMware ESX and OpenVZ drivers,
with qemu however, libvirt should report error when starting a domain,
because this element is not used.
Resolves https://bugzilla.redhat.com/show_bug.cgi?id=1122455
On some places in the libvirt code we have:
f(a,z)
instead of
f(a, z)
This trivial patch fixes couple of such occurrences.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1078126
Using 'virsh attach-device --config' (or --persistent) to attach a
file backed lun device will succeed; however, subsequent domain restarts
will result in failure because the configuration of a file backed lun
is not supported.
Although allowing 'illegal configurations' is something that can be
allowed, it may not be practical in this case. Generally, when attaching
a device to a domain means the domain must be running. A way around
this is using the --config (or --persistent) option. When an attach
is done to a running domain, a temporary configuration is modified
first followed by the live update. The live update will make a number
of disk validity checks when building the qemu command to attach the
disk. If any fail, then change is rejected.
Rather than allow a potentially illegal combination, adjust the code
in the configuration path to make the same checks as the running path
will make with respect to disk validity checks. This way we avoid
having the potential for some subsequent start/reboot to fail because
an illegal combination was allowed.
NB: The live path still checks the configuration since it is possible
to just do --live guest modification...
https://bugzilla.redhat.com/show_bug.cgi?id=1103245
An advice appeared there on the qemu-devel list [1]. When a domain is
suspended and then resumed guest kernel is not aware of this. So we've
introduced virDomainSetTime API that resets the time within guest
using qemu-ga. On the other hand, qemu itself is trying to make RTC
beat faster to catch the difference. But if we don't tell qemu that
guest's time was reset via the other method, both mechanisms are
applied resulting in again wrong guest time. In order to avoid summing
both corrections we need to tell qemu that it should not use the RTC
injection if the guest time is set via guest agent.
1: http://www.mail-archive.com/qemu-devel@nongnu.org/msg236435.html
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
