virQEMUCapsFillDomainDeviceGraphicsCaps fills data needed both for
validation of the graphics type and also for correct display in the
(dom)capablities XML.
Signal the support for SDL only when qemu has the capability.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
SDL graphics can be compiled out in qemu so we need to be able to know
whether the given qemu version support it.
Base the capability on the presence of the 'sdl' member in
'query-display-options' or imply it if 'query-display-options' is not
supported as we implied it before for all versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
The command allows to query various display-related options. The absence
of the command will be used to imply certain video-related capabilities
before we would be able to detect them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
IOThreads are supported with all 3 currently supported buses which can
have virtio devices (PCI, CCW, MMIO) , so there's no need for this check.
Additionally this check was buggy in the current location as on e.g.
hotplug cases the address may not yet be assigned for the disk and thus
a bogus error would be printed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1970277
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For validation of explicitly configured addresses we already ported the
same style of checks to qemuValidateDomainDeviceDefAddress and implicit
address assignment should do the right thing in the first place, thus
the function is redundant and can be removed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Base the check on the logic from qemuDomainCheckCCWS390AddressSupport,
which will be removed later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't support any qemu which would support the 'virtio-s390'
addressing, thus we can drop all code related to it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Modify the code in the last two instances in the code to behave as if
the flag is not asserted.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU_CAPS_VIRTIO_S390 can never be asserted any more, add an explicit
check that will reject the 'virtio-s390' address type and remove the
code which would auto-fill them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The devices no longer exist in qemu since the 2.6 release. Drop the
probing of the device properties and fix the data for
qemucapabilitiestest.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
QEMU commit 7b3fdbd9a826791bd98e649cf44c0a6129a44179 released in 2.6
dropped the legacy s390 virtio machine and it's devices. Remove our
probing based on the devices.
The probing of properties of the appropriate devices will be removed
subsequently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemuDomainDefAddDefaultDevices skipped adding the memballoon for the
's390-virtio' machine type, but since it was removed in qemu 2.6 we can
remove the hack now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
virQEMUCapsProbeQMPMachineProps currently skips any not supported
machine type which includes `none` as well.
In order to start probing that machine type we need to add an exception
to not skip it when probing QEMU capabilities.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
In libvirt we already use `query-command-line-options` QMP command but
that is useless as it doesn't provide correct data for `-machine`
option. So we need a new and better way to get that data.
We already use `qom-list-properties` to get options for specific machine
types so we can reuse it to get options for special `none` machine type
as a generic arch independent machine type.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There's nothing domain specific about NUMA interconnects. Rename
the virDomainNumaInterconnect* structures and enums to
virNumaInterconnect*.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There's nothing domain specific about NUMA memory caches. Rename the
virDomainCache* structures and enums to virNumaCache*.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
When using firmware auto-selection and user enables AMD SEV-ES we need
to pick correct firmware that actually supports it. This can be detected
by having `amd-sev-es` in the firmware JSON description.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Now we have everything prepared so that @model doesn't have to be
rewritten. The correct model can be chosen right from the
beginning.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
We want to call qemuBuildVirtioDevStr() from
qemuBuildDeviceVideoStr() but only for some models (currently
"virtio-gpu" and "vhost-user-gpu"), not all of them. Move this
logic into qemuDeviceVideoGetModel() because this logic will be
refined.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This may look like a step backwards, but it isn't. The point is
that in near future the chosen model will depend on more than
just video type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This may look like a step backwards, but it isn't. The point is
that in near future the chosen model will depend on more than
just video type.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
There is the same check written twice (whether given video card
is primary one and whether it supports VGA mode). Write it just
once and store it in a boolean variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
The code that decides video card model is going to be reworked
and expanded. Separate it out into a function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function doesn't modify passed video definition. Make the
argument const.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
QEMU 6.1 will replace the virgl property of virtio-vga device to
virtio-vga-gl device. Adapt to that update.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/167
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
QEMU 6.1 will add virtio-gpu-gl-pci device to replace the virgl property
of virtio-gpu-pci device. Adapt to that change.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1967356
Signed-off-by: Han Han <hhan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The devices virtio-gpu-gl-pci and virtio-vga-gl, aimed to replace the
virgl property, are valid for 3d accerlation as well.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This flag will be used for the device virtio-gpu-gl-pci which is introduced
since QEMU 6.1.
Signed-off-by: Han Han <hhan@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The "spawnDaemon" and "binary" parameters are co-dependant, with the
latter non-NULL, if-and-only-if the former is true. Getting rid of the
"spawnDaemon" parameter simplifies life for the callers and eliminates
an error checking scenario.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
libacl is Linux-only, so we don't need to explicitly check for
either the target platform or header availability, and we can
simply rely on cc.find_library() instead. The corresponding
preprocessor define is renamed to more accurately reflect the
nature of the check.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
QEMU_DOMAIN_DISK_PRIVATE(disk)->transientOverlayCreated flag
gets true unexpectedly on qemuProcessSetupDisksTransientSnapshot() when
the disk has <transient shareBacking='yes'> option.
The flag should be enabled on qemuDomainAttachDiskGeneric() after the
overlay setup is completed.
Skip enabling transientOverlayCreated for the disk here.
Fixes: 75871da0ecb8b552f9e304d0f83e216839bbf82d
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When <transient shareBacking='yes'> is set to a disk and the overlay
disk already exists because of something abnormal, libvirt is terminated
by Segmentation fault.
# virsh start Test0
error: Disconnected from qemu:///system due to end of file
error: Failed to start domain 'Test0'
error: End of file while reading data: Input/output error
Add NULL check for snapdiskdef so that the rollback can work correctly.
Signed-off-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com>
Fixes: 2e94002d2ace4e4a6dbfc13a84fdab28f22c5c4a
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
and re-adjust if the hotplug fails.
This fixes a bug found during testing of
https://bugzilla.redhat.com/1939776, which was supposed to be resolved
by commit 98e22ff749, but failed to account for the case of device
hotplug.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
An upcoming patch will be checking if the addition of a new net device
requires adjusting the domain locked memory limit, which must be done
prior to sending the command to qemu to add the new device. But
qemuDomainAdjustMaxMemLock() checks all (and only) the devices that
are currently in the domain definition, and currently we are adding
new net devices to the domain definition only at the very end of the
hotplug operation, after qemu has already executed the device_add
command.
In order for the upcoming patch to work, this patch changes
qemuDomainAttachNetDevice() to add the device to the domain nets list
at an earlier time. It can't be added until after PCI address and
alias name have been determined (because both of those examine
existing devices in the domain to figure out a unique value for the
new device), but must be done before making the qemu monitor call.
Since the device has been added to the list earlier, we need to
potentially remove it on failure. This is done by replacing the
existing call to virDomainNetRemoveHostdev() (which checks if this is
a hostdev net device, and if so removes it from the hostdevs list,
since it could have already been added to that list) with a call to
the new virDomainNetRemoveByObj(), which looks for the device on both
nets and hostdevs lists, and removes it where it finds it.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We have many places where the earliest error returns from a function
skip any cleanup label at the bottom (the assumption being that it is
so early in the function that there isn't yet anything that needs to
be explicitly undone on failure). But in general it is a bad sign if
there are any direct "return" statements in a function at any time
after there has been a "goto cleanup" - that indicates someone thought
that an earlier point in the code had done something needing cleanup,
so we shouldn't be skipping it.
There were two occurences of a "return -1" after "goto cleanup" in
qemuDomainAttachDeviceNet(). The first of these has been around for a
very long time (since 2013) and my assumption is that the earlier
"goto cleanup" didn't exist at that time (so it was proper), and when
the code further up in the function was added, the this return -1 was
missed. The second was added during a mass change to check the return
from qemuInterfacePrepareSlirp() in several places (commit
99a1cfc43889c6d); in this case it was erroneous from the start.
Change both of these "return -1"s to "goto cleanup". Since we already
have code paths earlier in the function that goto cleanup, this should
not cause any new problem.
Signed-off-by: Laine Stump <laine@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Implement this behaviour by skipping the disks on traditional
commandline and hotplug them before resuming CPUs. That allows to use
the support for hotplugging of transient disks which inherently allows
sharing of the backing image as we open it read-only.
This commit implements the validation code to allow it only with buses
supporting hotplug and the hotplug code while starting up the VM.
When we have such disk we need to issue a system-reset so that firmware
tables are regenerated to allow booting from such device.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuDomainAttachDiskGeneric will also be used on startup for
transient disks which share the overlay. The VM startup code passes the
asyncJob around so we need to pass it into qemuDomainAttachDiskGeneric.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Add code which creates the transient overlay after hotplugging the disk
backend before attaching the disk frontend.
The state of the topmost image is modified to be already read-only to
prevent the need to open the image in read-write mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
In preparation for hotplug of <transient> disks we'll need to track
whether the overlay file was created individually per-disk.
Add 'transientOverlayCreated' to 'struct _qemuDomainDiskPrivate' and
remove 'inhibitDiskTransientDelete' from 'qemuDomainObjPrivate' and
adjust the code for the change.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Split up the monitor contexts to attach the backend of the disk and the
frontend device in preparation for hotplugging transient disks where
we'll need to add the code for adding the transient overlay between
these two steps.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Modify the rollback section to use its own monitor context so that we
can later split up the hotplug into multiple steps and move the
detachment of the extension device into the rollback section rather than
doing it inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Similarly to previous refactors we want to move all hotplug related
setup which isn't strictly relevant to attaching the disk into
qemuDomainAttachDeviceDiskLiveInternal.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove the 'ret' variable and 'cleanup' label in favor of directly
returning the value since we don't have anything under the 'cleanup:'
label.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Remove two empty lines.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Move the auditing entry and insertion into the disk definition from the
function which deals with qemu to 'qemuDomainAttachDeviceDiskLiveInternal'
which deals with the hotplug related specifics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
