We already check that any auto-assigned bridge device name for a
virtual network (e.g. "virbr1") doesn't conflict with the bridge name
for any existing libvirt network (via virNetworkSetBridgeName() in
conf/network_conf.c).
We also want to check that the name doesn't conflict with any bridge
device created on the host system outside the control of libvirt
(history: possibly due to the ploriferation of references to libvirt's
bridge devices in HOWTO documents all around the web, it is not
uncommon for an admin to manually create a bridge in their host's
system network config and name it "virbrX"). To add such a check to
virNetworkBridgeInUse() (which is called by virNetworkSetBridgeName())
we would have to call virNetDevExists() (from util/virnetdev.c); this
function calls ioctl(SIOCGIFFLAGS), which everyone on the mailing list
agreed should not be done from an XML parsing function in the conf
directory.
To remedy that problem, this patch removes virNetworkSetBridgeName()
from conf/network_conf.c and puts an identically functioning
networkBridgeNameValidate() in network/bridge_driver.c (because it's
reasonable for the bridge driver to call virNetDevExists(), although
we don't do that yet because I wanted this patch to have as close to 0
effect on function as possible).
There are a couple of inevitable changes though:
1) We no longer check the bridge name during
virNetworkLoadConfig(). Close examination of the code shows that
this wasn't necessary anyway - the only *correct* way to get XML
into the config files is via networkDefine(), and networkDefine()
will always call networkValidate(), which previously called
virNetworkSetBridgeName() (and now calls
networkBridgeNameValidate()). This means that the only way the
bridge name can be unset during virNetworkLoadConfig() is if
someone edited the config file on disk by hand (which we explicitly
prohibit).
2) Just on the off chance that somebody *has* edited the file by hand,
rather than crashing when they try to start their malformed
network, a check for non-NULL bridge name has been added to
networkStartNetworkVirtual().
(For those wondering why I don't instead call
networkValidateBridgeName() there to set a bridge name if one
wasn't present - the problem is that during
networkStartNetworkVirtual(), the lock for the network being
started has already been acquired, but the lock for the network
list itself *has not* (because we aren't adding/removing a
network). But virNetworkBridgeInuse() iterates through *all*
networks (including this one) and locks each network as it is
checked for a duplicate entry; it is necessary to lock each network
even before checking if it is the designated "skip" network because
otherwise some other thread might acquire the list lock and delete
the very entry we're examining. In the end, permitting a setting of
the bridge name during network start would require that we lock the
entire network list during any networkStartNetwork(), which
eliminates a *lot* of parallelism that we've worked so hard to
achieve (it can make a huge difference during libvirtd startup). So
rather than try to adjust for someone playing against the rules, I
choose to instead give them the error they deserve.)
3) virNetworkAllocateBridge() (now removed) would leak any "template"
string set as the bridge name. Its replacement
networkFindUnusedBridgeName() doesn't leak the template string - it
is properly freed.
Add qemuDomainAddIOThread and qemuDomainDelIOThread in order to add or
remove an IOThread to/from the host either for live or config optoins
The implementation for the 'live' option will use the iothreadpids list
in order to make decision, while the 'config' option will use the
iothreadids list. Additionally, for deletion each may have to adjust
the iothreadpin list.
IOThreads are implemented by qmp objects, the code makes use of the existing
qemuMonitorAddObject or qemuMonitorDelObject APIs.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We're about to allow IOThreads to be deleted, but an iothreadid may be
included in some domain thread sched, so add a new API to allow removing
an iothread from some entry.
Then during the writing of the threadsched data and an additional check
to determine whether the bitmap is all clear before writing it out.
Since it's only ever referenced in domain_conf.c, make the function
static, but also will need to move it to somewhere before it's referenced
rather than forward referencing it.
Adding a new XML element 'iothreadids' in order to allow defining
specific IOThread ID's rather than relying on the algorithm to assign
IOThread ID's starting at 1 and incrementing to iothreads count.
This will allow future patches to be able to add new IOThreads by
a specific iothread_id and of course delete any exisiting IOThread.
Each iothreadids element will have 'n' <iothread> children elements
which will have attribute "id". The "id" will allow for definition
of any "valid" (eg > 0) iothread_id value.
On input, if any <iothreadids> <iothread>'s are provided, they will
be marked so that we only print out what we read in.
On input, if no <iothreadids> are provided, the PostParse code will
self generate a list of ID's starting at 1 and going to the number
of iothreads defined for the domain (just like the current algorithm
numbering scheme). A future patch will rework the existing algorithm
to make use of the iothreadids list.
On output, only print out the <iothreadids> if they were read in.
This is basically turning qemuDomObjEndAPI into a more general
function. Other drivers which gets a reference to domain objects may
benefit from this function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1113474
When we set the MAC address of a network device as a part of setting
up macvtap "passthrough" mode (where the domain has an emulated netdev
connected to a host macvtap device that has exclusive use of the
physical device, and sets the device MAC address to match its own,
i.e. "<interface type='direct'> <source mode='passthrough' .../>"), we
use ioctl(SIOCSIFHWADDR) giving it the name of that device. This is
true even if it is an SRIOV Virtual Function (VF).
But, when we are setting the MAC address / vlan ID of a VF in
preparation for "hostdev network" passthrough (this is where we set
the MAC address and vlan id of the VF after detaching the host net
driver and before assigning the device to the domain with PCI
passthrough, i.e. "<interface type='hostdev'>", we do the setting via
a netlink RTM_SETLINK message for that VF's Physical Function (PF),
telling it the VF# we want to change. This sets an "administratively
changed MAC" flag for that VF in the PF's driver, and from that point
on (until the PF driver is reloaded, *not* merely the VF driver) that
VF's MAC address can't be changed using ioctl(SIOCSIFHWADDR) - the
only way to change it is via the PF with RTM_SETLINK.
This means that if a VF is used for hostdev passthrough, it will have
the admin flag set, and future attempts to use that VF for macvtap
passthrough will fail.
The solution to this problem is to check if the device being used for
macvtap passthrough is actually a VF; if so, we use the netlink
RTM_SETLINK message to the PF to set the VF's mac address instead of
ioctl(SIOCSIFHWADDR) directly to the VF; if not, behavior does not
change from previously.
There are three pieces to making this work:
1) virNetDevMacVLan(Create|Delete)WithVPortProfile() now call
virNetDev(Replace|Restore)NetConfig() rather than
virNetDev(Replace|Restore)MacAddress() (simply passing -1 for VF#
and vlanid).
2) virNetDev(Replace|Restore)NetConfig() check to see if the device is
a VF. If so, they find the PF's name and VF#, allowing them to call
virNetDev(Replace|Restore)VfConfig().
3) To prevent mixups when detaching a macvtap passthrough device that
had been attached while running an older version of libvirt,
virNetDevRestoreVfConfig() is potentially given the preserved name
of the VF, and if the proper statefile for a VF can't be found in
the stateDir (${stateDir}/${pfname}_vf${vfid}),
virNetDevRestoreMacAddress() is called instead (which will look in
the file named ${stateDir}/${vfname}).
This problem has existed in every version of libvirt that has both
macvtap passthrough and interface type='hostdev'. Fortunately people
seem to use one or the other though, so it hasn't caused any real
world problem reports.
This revealed that GuestDefaultEmulator was a bit buggy, capable
of returning an emulator that didn't match the passed domain type. Fix
up the test suite input to continue to pass.
This is a helper function to look up all capabilities data for all
the OS bits that are relevant to <domain>. This is
- os type
- arch
- domain type
- emulator
- machine type
This will be used to replace several functions in later commits.
But the internal API stays the same, and we just convert the value as
needed. Not useful yet, but this is the beginning step of using an enum
for ostype throughout the code.
This is a simple wrapper around virNetDevBandwidthManipulateFilter() that
will update the desired filter on an interface (usually a network bridge)
with a new MAC address. Although, the MAC address in question usually
refers to some other interface - the one that the filter is constructed
for. Yeah, hard to parse. Thing is, our NATed network has a bridge where
some part of QoS takes place. And vNICs from guests are plugged into
the bridge. However, if a guest decides to change the MAC of its vNIC,
the corresponding qemu process emits an event which we can use to
update the QoS configuration based on the new MAC address.. However,
our QoS hierarchy is currently not notified, therefore it falls apart.
This function (when called in response to the aforementioned event)
will update our QoS hierarchy and duct tape it together again.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Add virStringHasControlChars that checks if the string has
any control characters other than \t\r\n,
and virStringStripControlChars that removes them in-place.
Two non-static functions in virjson.c were missing their export info in
libvirt_private.syms, so they couldn't be used anywhere it the code (and
that's about to get changed).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Create a new common API to replace the virCgroupNew{Vcpu|Emulator|IOThread}
API's using an emum to generate the cgroup name
Signed-off-by: John Ferlan <jferlan@redhat.com>
This new internal API checks if given CGroup controller is
available. It is going to be needed later when we need to make a
decision whether pin domain memory onto NUMA nodes using cpuset
CGroup controller or using numa_set_membind().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce virStoragePoolSaveState to properly format the state XML in
the same manner as virStoragePoolDefFormat, except for adding a
<poolstate> ... </poolstate> around the definition. This is similar to
virNetworkObjFormat used to save the live/active network information.
Instead of always using controller 0 and incrementing port number,
respect the maximum port numbers of controllers and use all of them.
Ports for virtio consoles are quietly reserved, but not formatted
(neither in XML nor on QEMU command line).
Also rejects duplicate virtio-serial addresses.
https://bugzilla.redhat.com/show_bug.cgi?id=890606https://bugzilla.redhat.com/show_bug.cgi?id=1076708
Test changes:
* virtio-auto.args
Filling out the port when just the controller is specified.
switched from using
maxport + 1
to:
first free port on the controller
* virtio-autoassign.args
Filling out the address when no <address> is specified.
Started using all the controllers instead of 0, also discards
the bus value.
* xml -> xml output of virtio-auto
The port assignment is no longer done as a part of XML parsing,
so the unspecified values stay 0.
Create a sorted array of virtio-serial controllers.
Each of the elements contains the controller index
and a bitmap of available ports.
Buses are not tracked, because they aren't supported by QEMU.
virDomainHasDiskMirror() currently detects only jobs that add the mirror
elements. Since some operations like migration are interlocked by
existing block jobs on the given domain the check needs to be
instrumented to check regular jobs too.
This patch renames virDomainHasDiskMirror to virDomainHasDiskBlockjob
and adds an argument that allows to select that it returns true only for
block copy jobs as those interlock making the domain persistent.
Other two uses trigger on any block job type.
Signed-off-by: Shanzhi Yu <shyu@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
libvirt has always used the netlink RTM_DELLINK message to delete
macvtap/macvlan devices, but it can actually be used to delete other
types of network devices, such as bonds and bridges. This patch makes
virNetDevMacVLanDelete() available as a generic function so it can
intelligibly be called to delete these other types of interfaces.
Recently we've fixed a bug where the status XML could not be parsed as
the parser used absolute path XPath queries. This test enhancement tests
all XML files used in the qemu-xml-2-xml test as a part of a status XML
snippet to see whether they are parsed correctly. The status XML-2-XML is
currently tested in 223 cases with this patch.
The current auto-indentation buffer code applies indentation only on
complete strings. To allow adding a string containing newlines and
having it properly indented this patch adds virBufferAddStr.
Every thread created as a worker thread within a pool gets a name
according to virThreadPoolJobFunc name.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Automatically assign a job to every thread created by virThreadCreate.
The name of the virThreadFunc function passed to virThreadCreate is used
as the job or worker name in case no name is explicitly passed.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Each thread can use a thread local variable to keep the name of a job
which is currently running in the job.
The virThreadJobSetWorker API is supposed to be called once by any
thread which is used as a worker, i.e., it is waiting in a pool, woken
up to do a job, and returned back to the pool.
The virThreadJobSet/virThreadJobClear APIs are to be called at the
beginning/end of each job.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Add a few helpers that allow to operate with memory device definitions
on the domain config and use them to implement memory device coldplug in
the qemu driver.
This patch adds code that parses and formats configuration for memory
devices.
A simple configuration would be:
<memory model='dimm'>
<target>
<size unit='KiB'>524287</size>
<node>0</node>
</target>
</memory>
A complete configuration of a memory device:
<memory model='dimm'>
<source>
<pagesize unit='KiB'>4096</pagesize>
<nodemask>1-3</nodemask>
</source>
<target>
<size unit='KiB'>524287</size>
<node>1</node>
</target>
</memory>
This patch preemptively forbids use of the <memory> device in individual
drivers so the users are warned right away that the device is not
supported.
Add a XML element that will allow to specify maximum supportable memory
and the count of memory slots to use with memory hotplug.
To avoid possible confusion and misuse of the new element this patch
also explicitly forbids the use of the maxMemory setting in individual
drivers's post parse callbacks. This limitation will be lifted when the
support is implemented.
This function does not make any sense now, that network driver is
(almost) dropped. I mean, previously, when threads were
serialized, this function was there to check, if no other network
with the same name or UUID exists. However, nowadays that threads
can run more in parallel, this function is useless, in fact it
gives misleading return values. Consider the following scenario.
Two threads, both trying to define networks with same name but
different UUID (e.g. because it was generated during XML parsing
phase, whatever). Lets assume that both threads are about to call
networkValidate() which immediately calls
virNetworkObjIsDuplicate().
T1: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T2: calls virNetworkObjIsDuplicate() and since no network with
given name or UUID exist, success is returned.
T1: calls virNetworkAssignDef() and successfully places its
network into the virNetworkObjList.
T2: calls virNetworkAssignDef() and since network with the same
name exists, the network definition is replaced.
Okay, this is mainly because virNetworkAssignDef() does not check
whether name and UUID matches. Well, lets make it so! And drop
useless function too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds the port type definitions and methods that will be used to bind
interfaces to the Midonet virtual ports.
virtnetdevmidonet.c adds the way to bind and unbind the ports by
calling into the Midonet Host Agent control command line (installed
with the midolman package).
Signed-off-by: Antoni Segura Puimedon <toni+libvirt@midokura.com>
As there are two possible approaches to define a domain's memory size -
one used with legacy, non-NUMA VMs configured in the <memory> element
and per-node based approach on NUMA machines - the user needs to make
sure that both are specified correctly in the NUMA case.
To avoid this burden on the user I'd like to replace the NUMA case with
automatic totaling of the memory size. To achieve this I need to replace
direct access to the virDomainMemtune's 'max_balloon' field with
two separate getters depending on the desired size.
The two sizes are needed as:
1) Startup memory size doesn't include memory modules in some
hypervisors.
2) After startup these count as the usable memory size.
Note that the comments for the functions are future aware and document
state that will be present after a few later patches.
virDomainNetFindIdx no longer returns info whether device was not found,
or there was multiple matches. Additionally it already handle error
reporting. Introduce virDomainHasNet which does a simple task, without
implicit error reporting.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
A helper that never returns an error and treats bits out of bitmap range
as false.
Use it everywhere we use ignore_value on virBitmapGetBit, or loop over
the bitmap size.
https://bugzilla.redhat.com/show_bug.cgi?id=1135491
More or less a virtual copy of the existing virDomainVcpuPin{Add|Del} API's.
NB: The IOThreads implementation "reused" the virDomainVcpuPinDefPtr
since it provided everything necessary - an "id" and a "map" for each
thread id configured.
This is going to be needed later, when some functions already
have the virNetworkObjList object already locked and need to
lookup a object to work on. As an example of such function is
virNetworkAssignDef(). The other use case might be in
virNetworkObjListForEach() callback.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is practically copy of qemuDomObjEndAPI. The reason why is
it so widely available is to avoid code duplication, since the
function is going to be called from our bridge driver, test
driver and parallels driver too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146539
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Implement virCommandPassFDGetFDIndex to determine the index a given
file descriptor will have when passed to the child process.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Adding functionality to libvirt that will allow it
query the ethtool interface for the availability
of certain NIC HW offload features
Here is an example of the feature XML definition:
<device>
<name>net_eth4_90_e2_ba_5e_a5_45</name>
<path>/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.1/net/eth4</path>
<parent>pci_0000_08_00_1</parent>
<capability type='net'>
<interface>eth4</interface>
<address>90:e2:ba:5e:a5:45</address>
<link speed='10000' state='up'/>
<feature name='rx'/>
<feature name='tx'/>
<feature name='sg'/>
<feature name='tso'/>
<feature name='gso'/>
<feature name='gro'/>
<feature name='rxvlan'/>
<feature name='txvlan'/>
<feature name='rxhash'/>
<capability type='80203'/>
</capability>
</device>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Since adding the support for scheduler policy settings in commit
8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1142631
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
$ virsh domblklist $dom
Target Source
------------------------------------------------
sda /var/lib/libvirt/images/file.qcow2
sda /var/lib/libvirt/images/file.img
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
This API joins the following two lines:
char *s = virBufferContentAndReset(buf1);
virBufferAdd(buf2, s, -1);
into one:
virBufferAddBuffer(buf2, buf1);
With one exception: there's no re-indentation applied to @buf1.
The idea is, that in general both can have different indentation
(like the test I'm adding proves)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since our formatter now handles well if the config is allocated and not
filled we can safely always-allocate the NUMA config and remove the
ad-hoc allocation code.
This will help in later patches as the parser will be refactored to just
fill the data.
Move the existing virDomainDefNew to virDomainDefNewFull as it's setting
a few things in the conf and re-introduce virDomainDefNew as a function
without parameters for common use.
For a while now there are two places that gather information about NUMA
related guest configuration. While the XML can't be changed we can at
least store the data in one place in the definition.
Rename the numatune_conf.[ch] files to numa_conf as later patches will
move the rest of the definitions from the cpu definition to this one.
We do have a check for valid per-domain security model, however we still
do permit an invalid security model for a domain's device (those which
are specified with <source> element).
This patch introduces a new function virSecurityManagerCheckAllLabel
which compares user specified security model against currently
registered security drivers. That being said, it also permits 'none'
being specified as a device security model.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1165485
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The enum converters are defined in the domain_conf.h (so
accessible widely across the code), but on the symbol layer, only
virDomainNetTypeToString was exposed. However, FromString variant
is going to be needed shortly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order for QEMU vCPU (and other) threads to run with RT scheduler,
libvirt needs to take care of that so QEMU doesn't have to run privileged.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1178986
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This function uses sched_setscheduler() function so it works with
processes and threads as well (even threads not created by us, which is
what we'll need in the future).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The helpers will be useful when implementing hotplug and coldplug of
random number generator devices.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When adding devices to the definition it's useful to check whether the
devices don't reside on a conflicting address. This patch adds a helper
that iterates all device info and compares the addresses with the given
info.
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
This helper eases iterating all key=value pairs stored in a JSON
object. Usually we pick only certain known keys from a JSON object, but
this will allow to walk complete objects and have the callback act on
those.
To be able to easily represent nodesets and other data stored in
virBitmaps in libvirt, this patch introduces a set of helpers that allow
to convert the bitmap to and from JSON value objects.
Extract the logic to determine which nodeset has to be used for a domain
from the formatting step so that it can be reused separately when the
nodeset is used in a different way.
This patch provides the utility functions needed to synchronize
the rxfilter changes made to a guest domain with the corresponding
macvtap devices on the host:
* Get/set PROMISC flag
* Get/set ALLMULTI, MULTICAST
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Do the allocation first, then add the actual device.
The second part should never fail. This is good
for live hotplug where we don't want to remove the device
on OOM after the monitor command succeeded.
The only change in behavior is that on failure, the
vmdef->consoles array is freed, not just the first console.
For stateless, client side drivers, it is never correct to
probe for secondary drivers. It is only ever appropriate to
use the secondary driver that is associated with the
hypervisor in question. As a result the ESX & HyperV drivers
have both been forced to do hacks where they register no-op
drivers for the ones they don't implement.
For stateful, server side drivers, we always just want to
use the same built-in shared driver. The exception is
virtualbox which is really a stateless driver and so wants
to use its own server side secondary drivers. To deal with
this virtualbox has to be built as 3 separate loadable
modules to allow registration to work in the right order.
This can all be simplified by introducing a new struct
recording the precise set of secondary drivers each
hypervisor driver wants
struct _virConnectDriver {
virHypervisorDriverPtr hypervisorDriver;
virInterfaceDriverPtr interfaceDriver;
virNetworkDriverPtr networkDriver;
virNodeDeviceDriverPtr nodeDeviceDriver;
virNWFilterDriverPtr nwfilterDriver;
virSecretDriverPtr secretDriver;
virStorageDriverPtr storageDriver;
};
Instead of registering the hypervisor driver, we now
just register a virConnectDriver instead. This allows
us to remove all probing of secondary drivers. Once we
have chosen the primary driver, we immediately know the
correct secondary drivers to use.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
A bunch of code is wrapped in #if WITH_LIBVIRTD in order to
enable the virStateDriver to be disabled when libvirtd is not
built. Disabling this code doesn't have any real functional
benefit beyond removing 1 pointer from the virConnectPtr struct,
while having a cost of many more conditionals.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virDBusMethodCall method has a DBusError as one of its
parameters. If the caller wants to pass a non-NULL value
for this, it immediately makes the calling code require
DBus at build time. This has led to breakage of non-DBus
builds several times. It is desirable that only the virdbus.c
file should need WITH_DBUS conditionals, so we must ideally
remove the DBusError parameter from the method.
We can't simply raise a libvirt error, since the whole point
of this parameter is to give the callers a way to check if
the error is one they want to ignore, without having the logs
polluted with an error message. So, we add a virErrorPtr
parameter which the caller can then either ignore or raise
using the new virReportErrorObject method.
This new method is distinct from virSetError in that it
ensures the logging hooks are run.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Moving code for parsing and formatting network routes to
networkcommon_conf helps reusing those routes for domains. The route
definition has been hidden to help reducing the number of unnecessary
checks in the format function.
The virDomainDefParse* and virDomainDefFormat* methods both
accept the VIR_DOMAIN_XML_* flags defined in the public API,
along with a set of other VIR_DOMAIN_XML_INTERNAL_* flags
defined in domain_conf.c.
This is seriously confusing & error prone for a number of
reasons:
- VIR_DOMAIN_XML_SECURE, VIR_DOMAIN_XML_MIGRATABLE and
VIR_DOMAIN_XML_UPDATE_CPU are only relevant for the
formatting operation
- Some of the VIR_DOMAIN_XML_INTERNAL_* flags only apply
to parse or to format, but not both.
This patch cleanly separates out the flags. There are two
distint VIR_DOMAIN_DEF_PARSE_* and VIR_DOMAIN_DEF_FORMAT_*
flags that are used by the corresponding methods. The
VIR_DOMAIN_XML_* flags received via public API calls must
be converted to the VIR_DOMAIN_DEF_FORMAT_* flags where
needed.
The various calls to virDomainDefParse which hardcoded the
use of the VIR_DOMAIN_XML_INACTIVE flag change to use the
VIR_DOMAIN_DEF_PARSE_INACTIVE flag.
Add the possibility to have more than one IP address configured for a
domain network interface. IP addresses can also have a prefix to define
the corresponding netmask.
Add a default implementation of virNetDevSetIPv4Address using netlink
and libnl. This avoids requiring /usr/sbin/ip or /usr/sbin/ifconfig
external binaries.
Some of the nwfilter tests are now failing since --concurrent shows
up in the ebtables command. To avoid this, implement a function
preventing the probing for lock support in the eb/iptables tools
and use it in the tests.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Currently, when there is an API that's blocking with locked domain and
second API that's waiting in virDomainObjListFindByUUID() for the domain
lock (with the domain list locked) no other API can be executed on any
domain on the whole hypervisor because all would wait for the domain
list to be locked. This patch adds new optional approach to this in
which the domain is only ref'd (reference counter is incremented)
instead of being locked and is locked *after* the list itself is
unlocked. We might consider only ref'ing the domain in the future and
leaving locking on particular APIs, but that's no tonight's fairy tale.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
At the time that the network driver allocates a connection to a
network, the tap device that will be used hasn't yet been created -
that will be done later by qemu (or lxc or whoever) - but if the
network has macTableManager='libvirt', then when we do get around to
creating the tap device, we will need to add an entry for it to the
network bridge's fdb (forwarding database) *and* turn off learning and
unicast_flood for that tap device in the bridge's sysfs settings. This
means that qemu needs to know both the bridge name as well as the
setting of macTableManager, so we either need to create a new API to
retrieve that info, or just pass it back in the ActualNetDef that is
created during networkAllocateActualDevice. We choose the latter
method, since it's already done for the bridge device, and it has the
side effect of making the information available in domain status.
(NB: in the future, I think that the tap device should actually be
created by networkAllocateActualDevice(), as that will solve several
other problems, but that is a battle for another day, and this
information will still be useful outside the network driver)
The macTableManager attribute of a network's bridge subelement tells
libvirt how the bridge's MAC address table (used to determine the
egress port for packets) is managed. In the default mode, "kernel",
management is left to the kernel, which usually determines entries in
part by turning on promiscuous mode on all ports of the bridge,
flooding packets to all ports when the correct destination is unknown,
and adding/removing entries to the fdb as it sees incoming traffic
from particular MAC addresses. In "libvirt" mode, libvirt turns off
learning and flooding on all the bridge ports connected to guest
domain interfaces, and adds/removes entries according to the MAC
addresses in the domain interface configurations. A side effect of
turning off learning and unicast_flood on the ports of a bridge is
that (with Linux kernel 3.17 and newer), the kernel can automatically
turn off promiscuous mode on one or more of the bridge's ports
(usually only the one interface that is used to connect the bridge to
the physical network). The result is better performance (because
packets aren't being flooded to all ports, and can be dropped earlier
when they are of no interest) and slightly better security (a guest
can still send out packets with a spoofed source MAC address, but will
only receive traffic intended for the guest interface's configured MAC
address).
The attribute looks like this in the configuration:
<network>
<name>test</name>
<bridge name='br0' macTableManager='libvirt'/>
...
This patch only adds the config knob, documentation, and test
cases. The functionality behind this knob is added in later patches.
These two functions use netlink RTM_NEWNEIGH and RTM_DELNEIGH messages
to add and delete entries from a bridge's fdb. The bridge itself is
not referenced in the arguments to the functions, only the name of the
device that is attached to the bridge (since a device can only be
attached to one bridge at a time, and must be attached for this
function to make sense, the kernel easily infers which bridge's fdb is
being modified by looking at the device name/index).
https://bugzilla.redhat.com/show_bug.cgi?id=1159180
Move the API from the backend to storage_conf and rename it to
virStoragePoolGetVhbaSCSIHostParent. A future patch will need to
use this functionality from storage_conf
Get mounted filesystems list, which contains hardware info of disks and its
controllers, from QEMU guest agent 2.2+. Then, convert the hardware info
to corresponding device aliases for the disks.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
As qemu is now able to notify us about change of the channel state used
for communication with the guest agent we now can more precisely track
the state of the guest agent.
To allow notifying management apps this patch implements a new event
that will be triggered on changes of the guest agent state.
To allow reuse this non-trivial parser code in the backing store parser
this part of the command line parser needs to be split out into a
separate funciton.
Ethernet interfaces in libvirt currently do not support bandwidth setting.
For example, following xml file for an interface will not apply these
settings to corresponding qdiscs.
<interface type="ethernet">
<mac address="02:36:1d:18:2a:e4"/>
<model type="virtio"/>
<script path=""/>
<target dev="tap361d182a-e4"/>
<bandwidth>
<inbound average="984" peak="1024" burst="64"/>
<outbound average="2000" peak="2048" burst="128"/>
</bandwidth>
</interface>
Signed-off-by: Anirban Chakraborty <abchak@juniper.net>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 01b4de2b9f abstracts virDomainParseMemory()
for use by other functions in domain_conf.c
Extend the same for use, for functions outside of this file.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This is a reaction to Michal's fix [1] for non-NUMA systems that also
splits out conf/ out of util/ because libvirt_util shouldn't require
libvirt_conf if it is the other way around. This particular use case
worked, but we're trying to avoid it as mentioned [2], many times.
The only functions from virnuma.c that needed numatune_conf were
virDomainNumatuneNodesetIsAvailable() and virNumaSetupMemoryPolicy().
The first one should be in numatune_conf as it works with
virDomainNumatune, the second one just needs nodeset and mode, both of
which can be passed without the need of numatune_conf.
Apart from fixing that, this patch also fixes recently added
code (between commits d2460f85^..5c8515620) that doesn't support
non-contiguous nodesets. It uses new function
virNumaNodesetIsAvailable(), which doesn't need a stub as it doesn't use
any libnuma functions, to check if every specified nodeset is available.
[1] https://www.redhat.com/archives/libvir-list/2014-November/msg00118.html
[2] http://www.redhat.com/archives/libvir-list/2011-June/msg01040.html
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
As of 90286418 the function is introduced. However, it's missing
an entry in the libvirt_private.syms so it can't be mocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There was no check for 'nodeset' attribute in numatune-related
elements. This patch adds validation that any nodeset specified does
not exceed maximum host node.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
This function is used to cleanup a pidfile doing whatever it takes, even
killing the owning process.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch provides the utility functions to needed to synchronize the
changes made to a guest domain network device's multicast filter
with the corresponding macvtap device's filter on the host:
* Get/add/remove multicast MAC addresses
* Get the macvtap device's RX filter list
Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
To prepare for introducing a single global driver, rename the
virDriver struct to virHypervisorDriver and the registration
API to virRegisterHypervisorDriver()
The helper checks whether a string contains only whitespace or is NULL.
This will be helpful to skip cases where a user string is optional, but
may be provided empty with the same meaning.
Our qemu monitor code has a converter from key-value pairs to a json
value object. I want to re-use the code later and having it part of the
monitor command generator is inflexible. Split it out into a separate
helper.
if specifying migration_host to an Ipv6 address without brackets,
it was resolved to an incorrect address, such as:
tcp:2001:0DB8::1428:4444,
but the correct address should be:
tcp:[2001:0DB8::1428]:4444
so we should add brackets when parsing it.
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
This same structure will be used to retrieve RX filter info for
interfaces on the host via netlink messages, and RX filter info for
interfaces on the guest via the qemu "query-rx-filter" command.
This new attribute will control whether or not libvirt will pay
attention to guest notifications about changes to network device mac
addresses and receive filters. The default for this is 'no' (for
security reasons). If it is set to 'yes' *and* the specified device
model and connection support it (currently only macvtap+virtio) then
libvirt will watch for NIC_RX_FILTER_CHANGED events, and when it
receives one, it will issue a query-rx-filter command, retrieve the
result, and modify the host-side macvtap interface's mac address and
unicast/multicast filters accordingly.
The functionality behind this attribute will be in a later patch. This
patch merely adds the attribute to the top-level of a domain's
<interface> as well as to <network> and <portgroup>, and adds
documentation and schema/xml2xml tests. Rather than adding even more
test files, I've just added the net attribute in various applicable
places of existing test files.
If we don't properly clean up all processes in the
machine-<vmname>.scope systemd won't remove the cgroup and subsequent vm
starts fail with
'CreateMachine: File exists'
Additional processes can e.g. be added via
echo $PID > /sys/fs/cgroup/systemd/machine.slice/machine-${VMNAME}.scope/tasks
but there are other cases like
http://bugs.debian.org/761521
Invoke TerminateMachine to be on the safe side since systemd tracks the
cgroup anyway. This is a noop if all processes have terminated already.
There are now two places in libvirt which use polkit. Currently
they use pkexec, which is set to be replaced by direct DBus API
calls. Add a common API which they will both be able to use for
this purpose.
No tests are added at this time, since the impl will be gutted
in favour of a DBus API call shortly.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This new event will use typedParameters to expose what has been actually
updated and the reason is that we can in the future extend any tunable
values or add new tunable values. With typedParameters we don't have to
worry about creating some other events, we will just use this universal
event to inform user about updates.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
To express empty drive we historically use storage source with empty
path. Unfortunately NBD disks may be declared without a path.
Add a helper to wrap this logic.
Up to now, users can configure BIOS via the <loader/> element. With
the upcoming implementation of UEFI this is not enough as BIOS and
UEFI are conceptually different. For instance, while BIOS is ROM, UEFI
is programmable flash (although all writes to code section are
denied). Therefore we need new attribute @type which will
differentiate the two. Then, new attribute @readonly is introduced to
reflect the fact that some images are RO.
Moreover, the OVMF (which is going to be used mostly), works in two
modes:
1) Code and UEFI variable store is mixed in one file.
2) Code and UEFI variable store is separated in two files
The latter has advantage of updating the UEFI code without losing the
configuration. However, in order to represent the latter case we need
yet another XML element: <nvram/>. Currently, it has no additional
attributes, it's just a bare element containing path to the variable
store file.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The new blockcopy API wants to reuse only a subset of the disk
hotplug parser - namely, we only care about the embedded
virStorageSourcePtr inside a <disk> XML. Strange as it may
seem, it was easier to just parse an entire disk definition,
then throw away everything but the embedded source, than it
was to disentangle the source parsing code from the rest of
the overall disk parsing function. All that I needed was a
couple of tweaks and a new internal flag that determines
whether the normally-mandatory target element can be
gracefully skipped, since everything else was already optional.
* src/conf/domain_conf.h (virDomainDiskSourceParse): New
prototype.
* src/conf/domain_conf.c (VIR_DOMAIN_XML_INTERNAL_DISK_SOURCE):
New flag.
(virDomainDiskDefParseXML): Honor flag to make target optional.
(virDomainDiskSourceParse): New function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add umask to _virCommand, allow user to set umask to command.
Set umask(002) to qemu process to overwrite the default umask
of 022 set by many distros, so that unix sockets created for
virtio-serial has expected permissions.
Fix problem reported here:
https://sourceware.org/bugzilla/show_bug.cgi?id=13078#c11https://bugzilla.novell.com/show_bug.cgi?id=888166
To use virtio-serial device, unix socket created for chardev with
default umask(022) has insufficient permissions.
e.g.:
-device virtio-serial \
-chardev socket,path=/tmp/foo,server,nowait,id=foo \
-device virtserialport,chardev=foo,name=org.fedoraproject.port.0
srwxr-xr-x 1 qemu qemu 0 21. Jul 14:19 /tmp/somefile.sock
Other users in the same group (like real user, test engines, etc)
cannot write to this socket.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
virStorageBackendVolDownloadLocal and virStorageBackendVolUploadLocal
use virFDStreamOpenFile function to work with the volume fd.
virFDStreamOpenFile calls virFDStreamOpenFileInternal that implements
handling of the non-blocking I/O. If a file is not a character device and
not a fifo, it uses libvirt_iohelper.
On FreeBSD, it doesn't work as expected because disk devices (including
ZFS volumes) are exposed as character devices, and ZFS volumes do not
support open(2) with O_NONBLOCK.
To overcome this, introduce a forceIOHelper flag to
virFDStreamOpenFileInternal that forces using libvirt_iohelper. And
introduce virFDStreamOpenBlockDevice that calls
virFDStreamOpenFileInternal with the forceIOHelper set to true.
That sets a new flag, but that flag does mean the child will get
LISTEN_FDS and LISTEN_PID environment variables properly set and
passed FDs reordered so that it corresponds with LISTEN_FDS (they must
start right after STDERR_FILENO).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since not only systemd can do this (we'll be doing it as well few
patches later), change 'systemd' to 'caller' and fix LISTEN_FDS to
LISTEN_PID where applicable.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1072653
Upon successful upload of a volume, the target volume and storage pool
were not updated to reflect any changes as a result of the upload. Make
use of the existing stream close callback mechanism to force a backend
pool refresh to occur in a separate thread once the stream closes. The
separate thread should avoid potential deadlocks if the refresh needed
to wait on some event from the event loop which is used to perform
the stream callback.
This should iterate over mount tab and search for hugetlbfs among with
looking for the default value of huge pages.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Leak introduced in commit 16ebf10f (v1.2.6), detected by valgrind:
==9816== 216 (96 direct, 120 indirect) bytes in 6 blocks are definitely lost in loss record 665 of 821
==9816== at 0x4A081D4: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
==9816== by 0x50836FB: virAlloc (viralloc.c:144)
==9816== by 0x1DBDBE27: udevProcessPCI (node_device_udev.c:546)
==9816== by 0x1DBDD79D: udevGetDeviceDetails (node_device_udev.c:1293)
* src/util/virpci.h (virPCIEDeviceInfoFree): New prototype.
* src/util/virpci.c (virPCIEDeviceInfoFree): New function.
* src/conf/node_device_conf.c (virNodeDevCapsDefFree): Clear
pci_express under pci case.
(virNodeDevCapPCIDevParseXML): Avoid leak.
* src/node_device/node_device_udev.c (udevProcessPCI): Likewise.
* src/libvirt_private.syms (virpci.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
virTimeFieldsThenRaw will never return negative result, so I clean up
the related meaningless judgements to make it better.
Signed-off-by: James <james.wangyufei@huawei.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Added <capabilities> in the <features> section of LXC domains
configuration. This section can contain elements named after the
capabilities like:
<mknod state="on"/>, keep CAP_MKNOD capability
<sys_chroot state="off"/> drop CAP_SYS_CHROOT capability
Users can restrict or give more capabilities than the default using
this mechanism.
Introduce a new function to parse the provided scsi_host parent address
and unique_id value in order to find the /sys/class/scsi_host directory
which will allow a stable SCSI host address
Add a test to scsihosttest to lookup the host# name by using the PCI address
and unique_id value
Introduce a new function to read the current scsi_host entry and return
the value found in the 'unique_id' file.
Add a 'scsihosttest' test (similar to the fchosttest, but incorporating some
of the concepts of the mocked pci test library) in order to read the
unique_id file like would be found in the /sys/class/scsi_host tree.
There were numerous places where numatune configuration (and thus
domain config as well) was changed in different ways. On some
places this even resulted in persistent domain definition not to be
stable (it would change with daemon's restart).
In order to uniformly change how numatune config is dealt with, all
the internals are now accessible directly only in numatune_conf.c and
outside this file accessors must be used.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Since there was already public virDomainNumatune*, I changed the
private virNumaTune to match the same, so all the uses are unified and
public API is kept:
s/vir\(Domain\)\?Numa[tT]une/virDomainNumatune/g
then shrunk long lines, and mainly functions, that were created after
that:
sed -i 's/virDomainNumatuneMemPlacementMode/virDomainNumatunePlacement/g'
And to cope with the enum name, I haad to change the constants as
well:
s/VIR_NUMA_TUNE_MEM_PLACEMENT_MODE/VIR_DOMAIN_NUMATUNE_PLACEMENT/g
Last thing I did was at least a little shortening of already long
name:
s/virDomainNumatuneDef/virDomainNumatune/g
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
There are many places with numatune-related code that should be put
into special numatune_conf and this patch creates a basis for that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Rename linuxDomainInterfaceStats to virNetInterfaceStats in order
to allow adding platform specific implementations without
making consumer worrying about specific implementation to be used.
Also, rename util/virstatslinux.c to util/virstats.c so placing
other platform specific implementations into this file don't
look unexpected from the file name.
Add security driver functions to label separate storage images using the
virStorageSource definition. This will help to avoid the need to do ugly
changes to the disk struct and use the source directly.
Cgroups code uses VIR_CGROUP_DEVICE_* flags to specify the mode but in
the end it needs to be converted to a string. Add a helper to do it and
use it in the cgroup code before introducing it into the rest of the
code.
We are going to modify storage source chains in place. Add a helper that
will copy relevant information such as security labels to the new
element if that doesn't contain it.
The qemu block info function relied on working with local storage. Break
this assumption by adding support for remote volumes. Unfortunately we
still need to take a hybrid approach as some of the operations require a
filedescriptor.
Previously you'd get:
$ virsh domblkinfo gl vda
error: cannot stat file '/img10': Bad file descriptor
Now you get some stats:
$ virsh domblkinfo gl vda
Capacity: 10485760
Allocation: 197120
Physical: 197120
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1110198
There's a lot of places where we skip doing actions based on the
locality of given storage type. The usual pattern is to skip it if:
virStorageSourceGetActualType(src) == VIR_STORAGE_TYPE_NETWORK
Add a simple helper to simplify the pattern to
virStorageSourceIsLocalStorage(src)
Replace the inline "auth" struct in virStorageSource with a pointer
to a virStorageAuthDefPtr and utilize between the domain_conf, qemu_conf,
and qemu_command sources for finding the auth data for a domain disk
Introduce virStorageAuthDef and friends. Future patches will merge/utilize
their view of storage source/pool auth/secret definitions.
New API's include:
virStorageAuthDefParse: Parse the "<auth/>" XML data for either the
domain disk or storage pool returning a
virStorageAuthDefPtr
virStorageAuthDefCopy: Copy a virStorageAuthDefPtr - to be used by
the qemuTranslateDiskSourcePoolAuth when it
copies storage pool auth data into domain
disk auth data
virStorageAuthDefFormat: Common output of the "<auth" in the domain
disk or storage pool XML
virStorageAuthDefFree: Free memory associated with virStorageAuthDef
Subsequent patches will utilize the new functions for the domain disk and
storage pools.
Future work in the hostdev pass through can then make use of common data
structures and code.
So far only information on disks and host devices are exposed in the
capabilities XML. Well, at least something. Even a new test is
introduced. The qemu capabilities are stolen from already existing
qemucapabilities test. There's one tricky point though. Functions that
checks host's KVM and VFIO capabilities, are impossible to mock
currently. So in the test, we are setting the capabilities by hand.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This new module holds and formats capabilities for emulator. If you
are about to create a new domain, you may want to know what is the
host or hypervisor capable of. To make sure we don't regress on the
XML, the formatting is not something left for each driver to
implement, rather there's general format function.
The domain capabilities is a lockable object (even though the locking
is not necessary yet) which uses reference counter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Check if the buffer is in error state and report an error if it is.
This replaces the pattern:
if (virBufferError(buf)) {
virReportOOMError();
goto cleanup;
}
with:
if (virBufferCheckError(buf) < 0)
goto cleanup;
Document typical buffer usage to favor this.
Also remove the redundant FreeAndReset - if an error has
been set via virBufferSetError, the content is already freed.
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
This patch introduces a function that will allow us to resolve a
relative difference between two elements of a disk backing chain. This
function will be used to allow relative block commit and block pull
where we need to specify the new relative name of the image to qemu.
This patch also adds unit tests for the function to verify that it works
correctly.
virPortAllocatorSetUsed permits to set a port as already used and
prevent the port allocator to use it without any attempt to bind it.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce a common function that will take a callback to resolve links
that will be used to canonicalize paths on various storage systems and
add extensive tests.
To free string lists with some strings stolen from the middle we need to
walk the complete array. Introduce a new helper that takes the string
list size to free such string lists.
I'm going to add functions that will deal with individual image files
rather than whole disks. Rename the security function to make room for
the new one.
The image labels are stored in the virStorageSource struct. Convert the
virDomainDiskDefGetSecurityLabelDef helper not to use the full disk def
and move it appropriately.
For future work we need two functions that fetches total number of
pages and number of free pages for given NUMA node and page size
(virNumaGetPageInfo()).
Then we need to learn pages of what sizes are supported on given node
(virNumaGetPages()).
Note that system page size is disabled at the moment as there's one
issue connected. If you have a NUMA node with huge pages allocated the
kernel would return the normal size of memory for that node. It
basically ignores the fact that huge pages steal size from the system
memory. Until we resolve this, it's safer to not confuse users and
hence not report any system pages yet.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For future work we want to get info for not only the free memory
but overall memory size too. That's why the function must have
new signature too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Not on all hosts the set of NUMA nodes IDs is continuous. This is
critical, because our code currently assumes the set doesn't contain
holes. For instance in nodeGetFreeMemory() we can see the following
pattern:
if ((max_node = virNumaGetMaxNode()) < 0)
return 0;
for (n = 0; n <= max_node; n++) {
...
}
while it should be something like this:
if ((max_node = virNumaGetMaxNode()) < 0)
return 0;
for (n = 0; n <= max_node; n++) {
if (!virNumaNodeIsAvailable(n))
continue;
...
}
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When the block job event was first added, it was for block pull,
where the active layer of the disk remains the same name. It was
also in a day where we only cared about local files, and so we
always had a canonical absolute file name. But two things have
changed since then: we now have network disks, where determining
a single absolute string does not really make sense; and we have
two-phase jobs (copy and active commit) where the name of the
active layer changes between the first event (ready, on the old
name) and second (complete, on the pivoted name).
Adam Litke reported that having an unstable string between events
makes life harder for clients. Furthermore, all of our API that
operate on a particular disk of a domain accept multiple strings:
not only the absolute name of the active layer, but also the
destination device name (such as 'vda'). As this latter name is
stable, even for network sources, it serves as a better string
to supply in block job events.
But backwards-compatibility demands that we should not change the
name handed to users unless they explicitly request it. Therefore,
this patch adds a new event, BLOCK_JOB_2 (alas, I couldn't think of
any nicer name - but at least Migrate2 and Migrate3 are precedent
for a number suffix). We must double up on emitting both old-style
and new-style events according to what clients have registered for
(see also how IOError and IOErrorReason emits double events, but
there the difference was a larger struct rather than changed
meaning of one of the struct members).
Unfortunately, adding a new event isn't something that can easily
be broken into pieces, so the commit is rather large.
* include/libvirt/libvirt.h.in (virDomainEventID): Add a new id
for VIR_DOMAIN_EVENT_ID_BLOCK_JOB_2.
(virConnectDomainEventBlockJobCallback): Document new semantics.
* src/conf/domain_event.c (_virDomainEventBlockJob): Rename field,
to ensure we catch all clients.
(virDomainEventBlockJobNew): Add parameter.
(virDomainEventBlockJobDispose)
(virDomainEventBlockJobNewFromObj)
(virDomainEventBlockJobNewFromDom)
(virDomainEventDispatchDefaultFunc): Adjust clients.
(virDomainEventBlockJob2NewFromObj)
(virDomainEventBlockJob2NewFromDom): New functions.
* src/conf/domain_event.h: Add new prototypes.
* src/libvirt_private.syms (domain_event.h): Export new functions.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Generate two
different events.
* src/qemu/qemu_process.c (qemuProcessHandleBlockJob): Likewise.
* src/remote/remote_protocol.x
(remote_domain_event_block_job_2_msg): New struct.
(REMOTE_PROC_DOMAIN_EVENT_BLOCK_JOB_2): New RPC.
* src/remote/remote_driver.c
(remoteDomainBuildEventBlockJob2): New handler.
(remoteEvents): Register new event.
* daemon/remote.c (remoteRelayDomainEventBlockJob2): New handler.
(domainEventCallbacks): Register new event.
* tools/virsh-domain.c (vshEventCallbacks): Likewise.
(vshEventBlockJobPrint): Adjust client.
* src/remote_protocol-structs: Regenerate.
Signed-off-by: Eric Blake <eblake@redhat.com>
These functions will handle PCIe devices and their link capabilities
to query some info about it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The purpose of this function is to fetch link state
and link speed for given NIC name from the SYSFS.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Currently it is not possible to determine the speed of an interface
and whether a link is actually detected from the API. Orchestrating
platforms want to be able to determine when the link has failed and
where multiple speeds may be available which one the interface is
actually connected at. This commit introduces an extension to our
interface XML (without implementation to interface driver backends):
<interface type='ethernet' name='eth0'>
<start mode='none'/>
<mac address='aa:bb:cc:dd:ee:ff'/>
<link speed='1000' state='up'/>
<mtu size='1492'/>
...
</interface>
Where @speed is negotiated link speed in Mbits per second, and state
is the current NIC state (can be one of the following: "unknown",
"notpresent", "down", "lowerlayerdown","testing", "dormant", "up").
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
A future patch wants to create disk definitions with non-zero
default contents; to avoid crashes, all callers that allocate
a disk definition should go through a common point.
I found allocation points by looking for any code that increments
ndisks, as well as any matches for ALLOC.*disk. Most places that
modified ndisks were covered by the parse from XML to domain/device
definition by initial domain creation or device hotplug; I also
hand-checked all drivers that generate a device struct on the
fly during getXMLDesc.
* src/conf/domain_conf.h (virDomainDiskDefNew): New prototype.
* src/conf/domain_conf.c (virDomainDiskDefNew): New function.
(virDomainDiskDefParseXML): Use it.
* src/parallels/parallels_driver.c (parallelsAddHddInfo):
Likewise.
* src/qemu/qemu_command.c (qemuParseCommandLine): Likewise.
* src/vbox/vbox_tmpl.c (vboxDomainGetXMLDesc): Likewise.
* src/vmx/vmx.c (virVMXParseDisk): Likewise.
* src/xenxs/xen_sxpr.c (xenParseSxprDisks, xenParseSxpr):
Likewise.
* src/xenxs/xen_xm.c (xenParseXM): Likewise.
* src/libvirt_private.syms (domain_conf.h): Export it.
Signed-off-by: Eric Blake <eblake@redhat.com>
The API gets a NUMA node and find distances to other nodes. The
distances are returned in an array. If an item X within the array
equals to value of zero, then there's no such node as X.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
To allow using the array manipulation macros on the arrays returned by
virStringSplit we need to know the count of the elements in the array.
Modify virStringSplit to return this value, rename it and add a helper
with the old name so that we don't need to update all the code.
Add parsers for relative and absolute backing names for local and remote
storage files.
This parser parses relative paths as relative to their parents and
absolute paths according to the protocol or local access.
For remote storage volumes, all URI based backing file names are
supported and for the qemu colon syntax the NBD protocol is supported.
Use virStorageFileReadHeader() to read headers of storage files possibly
on remote storage to retrieve the image metadata.
The backend information is now parsed by
virStorageFileGetMetadataInternal which is now exported from the util
source and virStorageFileGetMetadataFromFDInternal now doesn't need to
be exported.
My future work will modify the metadata crawler function to use the
storage driver file APIs to access the files instead of accessing them
directly so that we will be able to request the metadata for remote
files too. To avoid linking the storage driver to every helper file
using the utils code, the backing chain traversal function needs to be
moved to the storage driver source.
Additionally the virt-aa-helper and virstoragetest programs need to be
linked with the storage driver as a result of this change.
Since there isn't a single libc API to get this value, this patch
supplies one which gets the value by grabbing current time, then
converting that into a struct tm with gmtime_r(), then back to a
time_t using mktime.
The returned value is the difference between UTC and localtime in
seconds. If localtime is ahead of UTC (east) the offset will be a
positive number, and if localtime is behind UTC (west) the offset will
be negative.
This function should be POSIX-compliant, and is threadsafe, but not
async signal safe. If it was ever necessary to know this value in a
child process, we could cache it with a one-time init function when
libvirtd starts, then just supply the cached value, but that
complexity isn't needed for current usage; that would also have the
problem that it might not be accurate after a local daylight savings
boundary.
(If it weren't for DST, we could simply replace this entire function
with "-timezone"; timezone contains the offset of the current timezone
(negated from what we want) but doesn't account for DST. And in spite
of being guaranteed by POSIX, it isn't available on older versions of
mingw.)
Signed-off-by: Eric Blake <eblake@redhat.com>
The VIR_ENUM_DECL/VIR_ENUM_IMPL helper macros already append 'Type'
to the enum name being converted; it looks silly to have functions
with 'TypeType' in their name. Even though some of our enums have
to have a 'Type' suffix, the corresponding string conversion
functions do not.
* src/conf/secret_conf.h (VIR_ENUM_DECL): Rename virSecretUsageType.
* src/conf/storage_conf.h (VIR_ENUM_DECL): Rename
virStoragePoolAuthType, virStoragePoolSourceAdapterType,
virStoragePartedFsType.
* src/conf/domain_conf.c (virDomainDiskDefParseXML)
(virDomainFSDefParseXML, virDomainFSDefFormat): Update callers.
* src/conf/secret_conf.c (virSecretDefParseUsage)
(virSecretDefFormatUsage): Likewise.
* src/conf/storage_conf.c (virStoragePoolDefParseAuth)
(virStoragePoolDefParseSource, virStoragePoolSourceFormat):
Likewise.
* src/lxc/lxc_controller.c (virLXCControllerSetupLoopDevices):
Likewise.
* src/storage/storage_backend_disk.c
(virStorageBackendDiskPartFormat): Likewise.
* src/util/virstorageencryption.c (virStorageEncryptionSecretParse)
(virStorageEncryptionSecretFormat): Likewise.
* tools/virsh-secret.c (cmdSecretList): Likewise.
* src/libvirt_private.syms (secret_conf.h, storage_conf.h): Export
corrected names.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move sharable PCI handling functions to domain_addr.[ch], and
change theirs prefix from 'qemu' to 'vir':
- virDomainPCIAddressAsString;
- virDomainPCIAddressBusSetModel;
- virDomainPCIAddressEnsureAddr;
- virDomainPCIAddressFlagsCompatible;
- virDomainPCIAddressGetNextSlot;
- virDomainPCIAddressReleaseSlot;
- virDomainPCIAddressReserveAddr;
- virDomainPCIAddressReserveNextSlot;
- virDomainPCIAddressReserveSlot;
- virDomainPCIAddressSetFree;
- virDomainPCIAddressSetGrow;
- virDomainPCIAddressSlotInUse;
- virDomainPCIAddressValidate;
The only change here is function names, the implementation itself
stays untouched.
Extract common allocation code from DomainPCIAddressSetCreate
into virDomainPCIAddressSetAlloc.
All callers of virStorageFileGetMetadataFromBuf were first calling
virStorageFileProbeFormatFromBuf, to learn what format to pass in.
But this function is already wired to do the exact same probe if
the incoming format is VIR_STORAGE_FILE_AUTO, so it's simpler to
just refactor the probing into the central function.
* src/util/virstoragefile.h (virStorageFileGetMetadataFromBuf):
Drop parameter.
(virStorageFileProbeFormatFromBuf): Drop declaration.
* src/util/virstoragefile.c (virStorageFileGetMetadataFromBuf):
Do probe here instead of in callers.
(virStorageFileProbeFormatFromBuf): Make static.
* src/libvirt_private.syms (virstoragefile.h): Drop function.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Update caller.
* src/storage/storage_backend_gluster.c
(virStorageBackendGlusterRefreshVol): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
strtoul() is required to parse negative numbers as their
twos-complement positive counterpart. But sometimes we want
to reject negative numbers. Add new functions to do this.
The 'p' suffix is a mnemonic for 'positive' (technically it
also parses 0, but 'non-negative' doesn't lend itself to a
nice one-letter suffix).
* src/util/virstring.h (virStrToLong_uip, virStrToLong_ulp)
(virStrToLong_ullp): New prototypes.
* src/util/virstring.c (virStrToLong_uip, virStrToLong_ulp)
(virStrToLong_ullp): New functions.
* src/libvirt_private.syms (virstring.h): Export them.
* tests/virstringtest.c (testStringToLong): Test them.
Signed-off-by: Eric Blake <eblake@redhat.com>
To avoid memory leak of the "backingStoreRaw" field when reparsing
backing chains a new function is being introduced by this patch that
shall be used to clear backing store information.
The memory leak was introduced in commit 8823272d41.
SO_REUSEADDR on Windows is actually akin to SO_REUSEPORT
on Linux/BSD. ie it allows 2 apps to listen to the same
port at once. Thus we must not set it on Win32 platforms
See http://msdn.microsoft.com/en-us/library/windows/desktop/ms740621.aspx
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a wrapper for readdir. This helps us make sure that we always
set errno before calling readdir and it will make sure errors are
properly logged.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Create a nwfilterxml2firewalltest to exercise the
ebiptables_driver.applyNewRules method with a variety of
different XML input files. The XML input files are taken
from the libvirt-tck nwfilter tests. While the nwfilter
tests verify the final state of the iptables chains, this
test verifies the set of commands invoked to create the
chains.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The network and nwfilter drivers both have a need to update
firewall rules. The currently share no code for interacting
with iptables / firewalld. The nwfilter driver is fairly
tied to the concept of creating shell scripts to execute
which makes it very hard to port to talk to firewalld via
DBus APIs.
This patch introduces a virFirewallPtr object which is able
to represent a complete sequence of rule changes, with the
ability to have multiple transactional checkpoints with
rollbacks. By formally separating the definition of the rules
to be applied from the mechanism used to apply them, it is
also possible to write a firewall engine that uses firewalld
DBus APIs natively instead of via the slow firewalld-cmd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virNWFilterRuleIsProtocol{Ethernet,IPv4,IPv6} helper methods
to avoid having to write a giant switch statements with many cases.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Instead of hardcoding LIBEXECDIR as the location of the libvirt_iohelper
binary, use virFileFindResource to optionally find it in the current
build directory.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virFileFindResource which will try to locate files
in the local build tree if the calling binary (eg libvirtd or
test suite) is being run from the build tree. The corresponding
virFileActivateDirOverride should be called at startup passing
in argv[0]. This will be examined for evidence of libtool magic
binary prefix / sub-directory in order to activate the override.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Each backing store of a given disk is associated with a unique index
(which is also formatted in domain XML) for easier addressing of any
particular backing store. With this patch, any backing store can be
addressed by its disk target and the index. For example, "vdc[4]"
addresses the backing store with index equal to 4 of the disk identified
by "vdc" target. Such shorthand can be used in any API in place for a
backing file path:
virsh blockcommit domain vda --base vda[3] --top vda[2]
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Remove the pointer from def->cputune.vcpupin after unplugging
the CPU and also free the bitmap contained in the structure
by calling virDomainVcpuPinDel instead of VIR_FREE.
Introduced by commit 0df1a79.
This makes virDomainLookupVcpuPin redundant.
https://bugzilla.redhat.com/show_bug.cgi?id=1088165
When checking if two filenames point to the same inode (whether
by hardlink or symlink), sometimes one of the names might be
relative. This convenience function makes it easier to check.
* src/util/virfile.h (virFileRelLinkPointsTo): New prototype.
* src/util/virfile.c (virFileRelLinkPointsTo): New function.
* src/libvirt_private.syms (virfile.h): Export it.
* src/xen/xm_internal.c (xenXMDomainGetAutostart): Use it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Deciding if a user string represents a local file instead of a
network path is an operation worth exposing directly, particularly
since the next patch will be removing a redundant variable that
was caching the information.
* src/util/virstoragefile.h (virStorageIsFile): New declaration.
* src/util/virstoragefile.c (virBackingStoreIsFile): Rename...
(virStorageIsFile): ...export, and allow NULL input.
(virStorageFileGetMetadataInternal)
(virStorageFileGetMetadataRecurse, virStorageFileGetMetadata):
Update callers.
* src/conf/domain_conf.c (virDomainDiskDefForeachPath): Use it.
* src/storage/storage_backend_fs.c (virStorageBackendProbeTarget):
Likewise.
* src/libvirt_private.syms (virstoragefile.h): Export function.
Signed-off-by: Eric Blake <eblake@redhat.com>
Since it is an abbreviation, PCI should always be fully
capitalized or full lower case, never Pci.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
I almost wrote a hash value free function that just called
VIR_FREE, then realized I couldn't be the first person to
do that. Sure enough, it was worth factoring into a common
helper routine.
* src/util/virhash.h (virHashValueFree): New function.
* src/util/virhash.c (virHashValueFree): Implement it.
* src/util/virobject.h (virObjectFreeHashData): New function.
* src/libvirt_private.syms (virhash.h, virobject.h): Export them.
* src/nwfilter/nwfilter_learnipaddr.c (virNWFilterLearnInit): Use
common function.
* src/qemu/qemu_capabilities.c (virQEMUCapsCacheNew): Likewise.
* src/qemu/qemu_command.c (qemuDomainCCWAddressSetCreate):
Likewise.
* src/qemu/qemu_monitor.c (qemuMonitorGetBlockInfo): Likewise.
* src/qemu/qemu_process.c (qemuProcessWaitForMonitor): Likewise.
* src/util/virclosecallbacks.c (virCloseCallbacksNew): Likewise.
* src/util/virkeyfile.c (virKeyFileParseGroup): Likewise.
* tests/qemumonitorjsontest.c
(testQemuMonitorJSONqemuMonitorJSONGetBlockInfo): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Move some functions out of domain_conf for use in the next
patch where snapshot starts to directly use structs in
virstoragefile.
* src/conf/domain_conf.c (virDomainDiskDefFree)
(virDomainDiskSourcePoolDefParse): Adjust callers.
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefFree)
(virDomainDiskAuthClear): Move...
* src/util/virstoragefile.c (virStorageSourceClear)
(virStorageSourcePoolDefFree, virStorageSourceAuthClear): ...and
rename.
* src/conf/domain_conf.h (virDomainDiskAuthClear): Drop
declaration.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Adjust
caller.
* src/util/virstoragefile.h: Declare them.
* src/libvirt_private.syms (virstoragefile.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
The code in virstoragefile.c is getting more complex as I
consolidate backing chain handling code. But for the setuid
virt-login-shell, we don't need to crawl backing chains. It's
easier to audit things for setuid security if there are fewer
files involved, so this patch moves the one function that
virFileOpen() was actually relying on to also live in virfile.c.
* src/util/virstoragefile.c (virStorageFileIsSharedFS)
(virStorageFileIsSharedFSType): Move...
* src/util/virfile.c (virFileIsSharedFS, virFileIsSharedFSType):
...to here, and rename.
(virFileOpenAs): Update caller.
* src/security/security_selinux.c
(virSecuritySELinuxSetFileconHelper)
(virSecuritySELinuxSetSecurityAllLabel)
(virSecuritySELinuxRestoreSecurityImageLabelInt): Likewise.
* src/security/security_dac.c
(virSecurityDACRestoreSecurityImageLabelInt): Likewise.
* src/qemu/qemu_driver.c (qemuOpenFileAs): Likewise.
* src/qemu/qemu_migration.c (qemuMigrationIsSafe): Likewise.
* src/util/virstoragefile.h: Adjust declarations.
* src/util/virfile.h: Likewise.
* src/libvirt_private.syms (virfile.h, virstoragefile.h): Move
symbols as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Another struct being moved to util. This one doesn't have as
much use yet, thankfully.
* src/conf/domain_conf.h (virDomainDiskSourcePoolMode)
(virDomainDiskSourcePoolDef): Move...
* src/util/virstoragefile.h (virStorageSourcePoolMode)
(virStorageSourcePoolDef): ...and rename.
* src/conf/domain_conf.c (virDomainDiskSourcePoolDefFree)
(virDomainDiskSourceDefClear, virDomainDiskSourcePoolDefParse)
(virDomainDiskDefParseXML, virDomainDiskSourceDefParse)
(virDomainDiskSourceDefFormatInternal)
(virDomainDiskDefForeachPath, virDomainDiskSourceIsBlockType):
Adjust clients.
* src/qemu/qemu_conf.c (qemuTranslateDiskSourcePool): Likewise.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virstoragefile.h): ...as appropriate.
Signed-off-by: Eric Blake <eblake@redhat.com>
Encryption keys can be associated with each source file in a
backing chain; as such, this file belongs more in util/ where
it can be used by virstoragefile.h.
* src/conf/storage_encryption_conf.h: Rename...
* src/util/virstorageencryption.h: ...to this.
* src/conf/storage_encryption_conf.c: Rename...
* src/util/virstorageencryption.c: ...to this.
* src/Makefile.am (ENCRYPTION_CONF_SOURCES, CONF_SOURCES)
(UTIL_SOURCES): Update to new file names.
* src/libvirt_private.syms: Likewise.
* src/conf/domain_conf.h: Update client.
* src/conf/storage_conf.h: Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
In order to reuse the newly-created host-side disk struct in
the virstoragefile backing chain code, I first have to move
it to util/. This starts the process, by first moving the
security label structures.
* src/conf/domain_conf.h (virDomainDefGenSecurityLabelDef)
(virDomainDiskDefGenSecurityLabelDef, virSecurityLabelDefFree)
(virSecurityDeviceLabelDefFree, virSecurityLabelDef)
(virSecurityDeviceLabelDef): Move...
* src/util/virseclabel.h: ...to new file.
(virSecurityLabelDefNew, virSecurityDeviceLabelDefNew): Rename the
GenSecurity functions.
* src/qemu/qemu_process.c (qemuProcessAttach): Adjust callers.
* src/security/security_manager.c (virSecurityManagerGenLabel):
Likewise.
* src/security/security_selinux.c
(virSecuritySELinuxSetSecurityFileLabel): Likewise.
* src/util/virseclabel.c: New file.
* src/conf/domain_conf.c: Move security code, and fix fallout.
* src/Makefile.am (UTIL_SOURCES): Build new file.
* src/libvirt_private.syms (domain_conf.h): Move symbols...
(virseclabel.h): ...to new section.
Signed-off-by: Eric Blake <eblake@redhat.com>
To ease mocking for bhyve unit tests move virBhyveTapGetRealDeviceName()
out of bhyve_command.c to virnetdevtap and rename it to
virNetDevTapGetRealDeviceName().
A future patch will split virDomainDiskDef, in order to track
multiple host resources per guest <disk>. To reduce the size
of that patch, I've factored out the four most common accesses
into functions, so that I can incrementally upgrade the code
base to use the accessors, and so that code that doesn't care
about the distinction of per-file details won't have to be
changed when the struct changes.
* src/conf/domain_conf.h (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): New prototypes.
* src/conf/domain_conf.c (virDomainDiskGetType)
(virDomainDiskSetType, virDomainDiskGetSource)
(virDomainDiskSetSource, virDomainDiskGetDriver)
(virDomainDiskSetDriver, virDomainDiskGetFormat)
(virDomainDiskSetFormat): Implement them.
* src/libvirt_private.syms (domain_conf.h): Export them.
Signed-off-by: Eric Blake <eblake@redhat.com>
Add virFDStreamOpenPTY() function which is a wrapper around
virFDStreamOpenFileInternal() with putting the device it opens into a
raw mode.
Make virChrdevOpen() use virFDStreamOpenPTY() for
VIR_DOMAIN_CHR_TYPE_PTY devices.
This fixes mangled console output when libvirt runs on FreeBSD as it
requires device it opens to be placed into a raw mode explicitly.
The test suites often have to create DBus method reply messages
with payloads. Create two helpers for simplifying the process
of creating replies with payloads.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Split the virDBusMethodCall method into a couple of new methods
virDBusCall, virDBusCreateMethod and virDBusCreateMethodV.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The offset of virDomainDeviceInfo structure within a device definition
varies with device type and some types do not contain the info structure
at all. This new API makes it easier to access the info structure from a
generic virDomainDeviceDef structure.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Create qemu monitor events as a distinct class to normal domain
events, because they will be filtered differently. For ease of
review, the logic for filtering by event name is saved for a later
patch.
* src/conf/domain_event.c (virDomainQemuMonitorEventClass): New
class.
(virDomainEventsOnceInit): Register it.
(virDomainQemuMonitorEventDispose, virDomainQemuMonitorEventNew)
(virDomainQemuMonitorEventDispatchFunc)
(virDomainQemuMonitorEventStateRegisterID): New functions.
* src/conf/domain_event.h (virDomainQemuMonitorEventNew)
(virDomainQemuMonitorEventStateRegisterID): New prototypes.
* src/libvirt_private.syms (conf/domain_conf.h): Export them.
