GIC v2 is the default, but checking against that specific version when
we want to know whether the default has been selected is potentially
error prone; using an alias instead makes it safer.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
Similarly to VM startup always set the legacy affinity. Additionally we
don't need to report an explicit error since virProcessSetAffinity
reports them themselves.
PostParse handles it for us now.
This causes some test suite churn; qemu's custom PostParse could is
now invoked before the generic AddImplicitControllers, so PCI
controllers end up sequentially in the XML before the generically
added IDE controllers. So it's just some XML reordering
Seems like the natural fit, since we are already adding other XML bits
in the PostParse routine.
Previously AddImplicitControllers was only called at the end of XML
parsing, meaning code that builds a DomainDef by hand had to manually
call it. Now those PostParse callers get it for free.
There's some test churn here; xen xm and sexpr test suite bits weren't
calling this before, but now they are, so you'll see new IDE controllers.
I don't think this will cause problems in practice, since the code already
needs to handle these implicit controllers like in the case when a user
defines their own XML.
virDomainObjWait is designed to be called in a loop. Make sure we break
the loop in case the domain dies to avoid waiting for an event which
will never happen.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Calling qemuProcessStop without a job opens a way to race conditions
with qemuDomainObjExitMonitor called in another thread. A real world
example of such a race condition:
- migration thread (A) calls qemuMigrationWaitForSpice
- another thread (B) starts processing qemuDomainAbortJob API
- thread B signals thread A via qemuDomainObjAbortAsyncJob
- thread B enters monitor (qemuDomainObjEnterMonitor)
- thread B calls qemuMonitorSend
- thread A awakens and calls qemuProcessStop
- thread A calls qemuMonitorClose and sets priv->mon to NULL
- thread B calls qemuDomainObjExitMonitor with priv->mon == NULL
=> monitor stays ref'ed and locked
Depending on how lucky we are, the race may result in a memory leak or
it can even deadlock libvirtd's event loop if it tries to lock the
monitor to process an event received before qemuMonitorClose was called.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Stopping a domain without a job risks a race condition with another
thread which started a job a which does not expect anyone else to be
messing around with the same domain object.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Only a small portion of processGuestPanicEvent was enclosed within a
job, let's make sure we use the job for all operations to avoid race
conditions.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When destroying a domain we need to make sure we will be able to start a
job no matter what other operations are running or even stuck in a job.
This is done by killing the domain before starting the destroy job.
Let's introduce qemuProcessBeginStopJob which combines killing a domain
and starting a job in a single API which can be called everywhere we
need a job to stop a domain.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Ending a nested job is no different from ending any other (non-async)
job, after all the code in qemuDomainBeginJobInternal does not handle
them differently either. Thus we should call qemuDomainObjEndJob to stop
nested jobs.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
qemuDomainHelperGetVcpus would correctly return an array of
virVcpuInfoPtr structs for online vcpus even for sparse topologies, but
the loop that fills the returned typed parameters would number the vcpus
incorrectly. Fortunately sparse topologies aren't supported yet.
When virt-admin is run with valgrind, this kind of output can be obtained:
HEAP SUMMARY:
in use at exit: 134,589 bytes in 1,031 blocks
total heap usage: 2,667 allocs, 1,636 frees, 496,755 bytes allocated
88 bytes in 1 blocks are definitely lost in loss record 82 of 128
at 0x4C2A9C7: calloc (in /usr/lib64/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x52F6D1F: virAllocVar (viralloc.c:560)
by 0x5350268: virObjectNew (virobject.c:193)
by 0x53503E0: virObjectLockableNew (virobject.c:219)
by 0x4E3BBCB: virAdmConnectNew (datatypes.c:832)
by 0x4E38495: virAdmConnectOpen (libvirt-admin.c:209)
by 0x10C541: vshAdmConnect (virt-admin.c:107)
by 0x10C7B2: vshAdmReconnect (virt-admin.c:163)
by 0x10CC7C: cmdConnect (virt-admin.c:298)
by 0x110838: vshCommandRun (vsh.c:1224)
by 0x10DFD8: main (virt-admin.c:862)
LEAK SUMMARY:
definitely lost: 88 bytes in 1 blocks
indirectly lost: 0 bytes in 0 blocks
possibly lost: 0 bytes in 0 blocks
still reachable: 134,501 bytes in 1,030 blocks
suppressed: 0 bytes in 0 blocks
This is because virNetClientSetCloseCallback was being reinitialized
incorrectly. By resetting the callbacks in a proper way, the leak is fixed.
A login session with the vSphere API might expire after some idle time.
The esxVI_EnsureSession function uses the SessionIsActive function to
check if the current session has expired and a relogin needs to be done.
But the SessionIsActive function needs the Sessions.ValidateSession
privilege that is considered as an admin level privilege.
Only vCenter actually provides the SessionIsActive function. This results
in requiring an admin level privilege even for read-only operations on
a vCenter server.
ESX and VMware Server don't provide the SessionIsActive function and
the code already works around that. Use the same workaround for vCenter
again.
This basically reverts commit 5699034b65.
Commit f1a89a8 allowed parsing configs from /etc/libvirt
without validating the emulator capabilities.
Check for the presence of os->type.machine even if the
VIR_DOMAIN_DEF_PARSE_SKIP_OSTYPE_CHECKS flag is set,
otherwise the daemon can crash on carelessly crafted input
in the config directory.
https://bugzilla.redhat.com/show_bug.cgi?id=1267256
Add new function to manage adding the '-mon' or '-monitor' options to
the command line removing that task from the mainline qemuBuildCommandLine.
Also adjusted qemuBuildChrChardevStr and qemuBuildChrArgStr to use
const virDomainChrSourceDef *def rather than virDomainChrSourceDefPtr def.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the '-device sga' to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the '-smbios' options to the command
line removing that task from the mainline qemuBuildCommandLine
Also while I was looking at it, move the uuid processing closer to usage.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the '-numa' options to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the IOThread '-object' to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rename function and move code in from qemuBuildCommandLine to
keep smp related code together. Also make a few style changes
for long lines, return value change, and 2 spaces between functions.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add new function to manage adding the '-m' memory options to the command
line removing that task from the mainline qemuBuildCommandLine
Signed-off-by: John Ferlan <jferlan@redhat.com>
Create qemuBuildCommandLineValidate to make some checks before trying
to build the command. This will move some logic from much later to much
earlier - we shouldn't be adjusting any data so that shouldn't matter.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Now that the file migration doesn't require us to use 'dd' and other
legacy stuff for too old qemus we don't even have to calcuate the
offsets and other stuff.
With the currently supported qemus we always migrate to file
descriptors so the old function is not required any more.
Additionally QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE macro is now
unused.
In cf113e8d we changed the declaration of
virCgroupAllowDevicePath() and virCgroupDenyDevicePath().
However, while updating the stub for non-cgroup platforms for the
former we forgot to update the latter too causing a build
failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This reverts commit 611a278fa4.
According to the original commit message, this is dead code:
It is highly unlikely that a backend will know how to create a
volume from a different volume (buildVolFrom) and not know how to
create an empty volume (createVol).
This API is merely a convenience API, i.e. when managing clients connected to
daemon's servers, we should know (convenience) which server the specific client
is connected to. This implies a client-side representation of a server along
with a basic API to let the administrating client know what servers are actually
available on the daemon.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This is the key structure of all management operations performed on the
daemon/clients. An admin client needs to be able to identify
another client (either admin or non-privileged client) to perform an
action on it. This identification includes a server the client is
connected to, thus a client-side representation of a server is needed.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Since the daemon can manage and add (at fresh start) multiple servers,
we also should be able to add them from a JSON state file in case of a
daemon restart, so post exec restart support for multiple servers is also
provided. Patch also updates virnetdaemontest accordingly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The method will now return 0 on success and -1 on error, rather than number of
items which it iterated over before it returned back to the caller. Since the
only place where we actually check the number of elements iterated is in
virhashtest, return value of 0 and -1 can be a pretty accurate hint that it
iterated over all the items. However, if we really want to know the number of
items iterated over (like virhashtest does), a counter has to be provided
through opaque data to each iterator call. This patch adjusts return value of
virHashForEach, refactors the body, so it returns as soon as one of the
iterators fail and adjusts virhashtest to reflect these changes.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Our existing virHashForEach method iterates through all items disregarding the
fact, that some of the iterators might have actually failed. Errors are usually
dispatched through an error element in opaque data which then causes the
original caller of virHashForEach to return -1. In that case, virHashForEach
could return as soon as one of the iterators fail. This patch changes the
iterator return type and adjusts all of its instances accordingly, so the
actual refactor of virHashForEach method can be dealt with later.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
When adding disk images to ACL we may call those functions on NFS
shares. In that case we might get an EACCES, which isn't really relevant
since NFS would not hold a block device. This patch adds a flag that
allows to stop reporting an error on EACCES to avoid spaming logs.
Currently there's no functional change.
Since commit 47e5b5ae virCgroupAllowDevice allows to pass -1 as either
the minor or major device number and it automatically uses '*' in place
of that. Reuse the new approach through the code and drop the duplicated
functions.
After removing capability check for fd migration the code that was left
behind didn't make quite sense. The old exec migration would be used in
case when pipe() failed. Remove the old code and make failure of pipe()
a hard error.
This additionally removes usage of virCgroupAllowDevicePath outside of
qemu_cgroup.c.
Since no value in the virGICVersion enumeration is negative, a clever
enough compiler can report an error such as
src/conf/domain_conf.c:15337:75: error: comparison of unsigned enum
expression < 0 is always false [-Werror,-Wtautological-compare]
if ((def->gic_version = virGICVersionTypeFromString(tmp)) < 0 ||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ^ ~
virGICVersionTypeFromString() can, however, return a negative value if
the input string is not part of the enumeration, so we definitely need
that check.
Work around the problem by storing the return value in a temporary int
variable.
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.
Make qemuDomainSupportsPCI non static.
Also, move and rename the following:
qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceBridgeConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move the misplaced function from qemu_command.c to qemu_interface.c
since it's closer in functionality there and had less to do with building
the command line.
Rename function to qemuInterfaceDirectConnect and modify callers.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move function closer to where it's used in qemuBuildTPMCommandLine
Also fix function header to match current coding practices
Signed-off-by: John Ferlan <jferlan@redhat.com>
Move function closer to where it's called in qemuBuildTPMCommandLine
Also adjust function header to fit current coding guidelines
Signed-off-by: John Ferlan <jferlan@redhat.com>
We currently blindly accept any numeric value as a GIC version, even
though only GIC v2 and GIC v3 actually exist; on the other hand, we
reject "host", which is a perfectly legitimate value for QEMU guests.
This new enumeration contains all GIC versions libvirt is aware of.
Currently, on hot unplug of PCI devices with VFIO driver for QEMU, libvirt is
trying to restore the host devices to it's previous value (basically a chown
on the previous user/group).
However for devices with VFIO driver, when the device is unbinded it is
removed from the /dev/vfio file system causing the restore label to fail.
The fix is to not restore the label for those PCI devices since they are going
to be teared down anyway.
Signed-off-by: Ludovic Beliveau <ludovic.beliveau@windriver.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The existing log messages for this have several problems; there are
two lines of log when one will suffice, they duplicate the function
name in log message (when it's already included by VIR_DEBUG), they're
missing some useful bits, they get logged even when the call is a NOP.
This patch cleans up the problems with those existing logs, and also
adds a new VIR_INFO-level log down at the function that is actually
creating and sending the netlink message that logs *everything* going
into the netlink message (which turns out to be much more useful in
practice for me; I didn't want to eliminate the logs at the existing
location though, in case they are useful in some scenario I'm
unfamiliar with; anyway those logs are remaining at debug level, so it
shouldn't be a bother to anyone).
There are three functions that deal with allocating and freeing
devices from a networks netdev/pci device pool:
network(Allocate|Notify|Release)ActualDevice(). These functions also
maintain a counter of the number of domains currently using a network
(regardless of whether or not that network uses a device pool). Each
of these functions had multiple log messages (output using VIR_DEBUG)
that were in slightly different formats and gave varying amounts of
information.
This patch creates a single function to log the pertinent information
in a consistent manner for all three of these functions. Along with
assuring that all the functions produce a consistent form of output
(and making it simpler to change), it adds the MAC address of the
domain interface involved in the operation, making it possible to
verify which interface of which domain the operation is being done for
(assuming that all MAC addresses are unique, of course).
All of these messages are raised from DEBUG to INFO, since they don't
happen that often (once per interface per domain/libvirtd start or
domain stop), and can be very informative and helpful - eliminating
the need to log debug level messages makes it much easier to sort
these out.
networkReleaseActualDevice() and networkNotifyActualDevice() both were
updating the individual devices' connections count in two separate
places (unlike networkAllocateActualDevice() which does it in a single
unified place after success:). The code is correct, but prone to
confusion / later breakage. All of these updates are anyway located at
the end of if/else clauses that are (with the exception of a single
VIR_DEBUG() in each case) immediately followed by the success: label
anyway, so this patch replaces the duplicated ++/-- instructions with
a single ++/-- inside a qualifying "if (dev)" down below success:.
(NB: if dev != NULL, by definition we are using a device (either pci
or netdev, doesn't matter for these purposes) from the network's pool)
The VIR_DEBUG args (which will be replaced in a followup patch anyway)
were all adjusted to account for the connection count being out of
date at the time.
Since Ceph version Infernalis (9.2.0) the new fast-diff mechanism
of RBD allows for querying actual volume usage.
Prior to this version there was no easy and fast way to query how
much allocation a RBD volume had inside a Ceph cluster.
To use the fast-diff feature it needs to be enabled per RBD image
and is only supported by Ceph cluster running version Infernalis
(9.2.0) or newer.
Without the fast-diff feature enabled libvirt will report an allocation
identical to the image capacity. This is how libvirt behaves currently.
'virsh vol-info rbd/image2' might output for example:
Name: image2
Type: network
Capacity: 1,00 GiB
Allocation: 124,00 MiB
Newly created volumes will have the fast-diff feature enabled if the
backing Ceph cluster supports it.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
In commit 0b15f920 there is a #ifdef which requires LIBRBD_VERSION_CODE
266 or newer for rbd_diff_iterate2()
rbd_diff_iterate2() is available since 266, so this if-statement should
require anything newer than 265.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
As more and more features are added to RBD volumes we will need to
call this method more often.
By moving it into a internal function we can re-use code inside the
storage backend.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
It is highly unlikely that a backend will know how to create a
volume from a different volume (buildVolFrom) and not know how to
create an empty volume (createVol). But:
1) we call the function without any prior check so if that's the
case we would SIGSEGV immediatelly
2) it's better to be safe than sorry.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Firstly, we realloc internal list to hold new item (=volume that
will be potentially created) and then we check whether we
actually know how to create it. If we don't we consume more
memory than we really need for no good reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Race condition:
User calls defineXML to create new instance.
The main thread from vzDomainDefineXMLFlags() creates new instance by prlsdkCreateVm.
Then this thread calls prlsdkAddDomain to add new domain to domains list.
The second thread receives notification from hypervisor that new VM was created.
It calls prlsdkHandleVmAddedEvent() and also tries to add new domain to domains list.
These two threads call virDomainObjListFindByUUID() from prlsdkAddDomain() and don't find new domain.
So they add two domains with the same uuid to domains list.
This fix splits logic of prlsdkAddDomain() into two functions.
1. vzNewDomain() creates new empty domain in domains list with the specific uuid.
2. prlsdkLoadDomain() add data from VM to domain object.
New algorithm for creating an instance:
In vzDomainDefineXMLFlags() we add new domain to domain list by calling vzNewDomain()
and only after that we call CreateVm() to create VM.
It means that we "reserve" domain object with the specific uuid.
After creation of new VM we add info from this VM
to reserved domain object by calling prlsdkLoadDomain().
Before this patch prlsdkLoadDomain() worked in 2 different cases:
1. It creates and initializes new domain. Then updates it from sdk handle.
2. It updates existed domain from sdk handle.
In this patch we remove code which creates new domain from LoadDomain()
and move it to vzNewDomain().
Now prlsdkLoadDomain() only updates domain from skd handle.
In notification handler prlsdkHandleVmAddedEvent() we check
the existence of a domain and if it doesn't exist we add new domain by calling
vzNewDomain() and load info from sdk handle via prlsdkLoadDomain().
Bug cause:
Update the domain that is subscribed to hypervisor notification.
LoadDomain() rewrites notifications fields in vzDomObj structure and makes domain as "unsubscribed".
Fix:
Initialize notification fields in vzDomObj only if we create a new domain.
And do not reinitialize these fields if we update domain (by calling LoadDomain with olddom argument)
prlsdkGetDomainIds() returns name and uuid for specified instance.
Now output arguments can be NULL.
It allows to get only necessary info(name or uuid).
The snapshot name generator truncates the original file name after a '.'
and replaces the suffix with the snapshot name. If two disks source
images differ only in the suffix portion, the generated name will be
duplicate.
Since this is a corner case just error out stating that a duplicate name
was generated. The user can work around this situation by providing
the file names explicitly.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283085
Apparently we are not the only ones with dumb free functions
because dbus_message_unref() does not accept NULL either. But if
I were to vote, this one is even more evil. Instead of returning
an error just like we do it immediately dereference any pointer
passed and thus crash you app. Well done DBus!
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f878ebda700 (LWP 31264)]
0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
(gdb) bt
#0 0x00007f87be4016e5 in ?? () from /usr/lib64/libdbus-1.so.3
#1 0x00007f87be3f004e in dbus_message_unref () from /usr/lib64/libdbus-1.so.3
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
#3 0x00007f879761bd4d in qemuConnectCgroup (driver=0x7f87600a32a0, vm=0x7f87600c7550) at qemu/qemu_cgroup.c:909
#4 0x00007f87976386b7 in qemuProcessReconnect (opaque=0x7f87600db840) at qemu/qemu_process.c:3386
#5 0x00007f87bf6edfff in virThreadHelper (data=0x7f87600d5580) at util/virthread.c:206
#6 0x00007f87bb602334 in start_thread (arg=0x7f878ebda700) at pthread_create.c:333
#7 0x00007f87bb3481bd in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:109
(gdb) frame 2
#2 0x00007f87bf6ecf95 in virSystemdGetMachineNameByPID (pid=9849) at util/virsystemd.c:228
228 dbus_message_unref(reply);
(gdb) p reply
$1 = (DBusMessage *) 0x0
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Do not store the return value of called functions in the same variable
as the (future) return value of the current function.
This makes tracking the origin of the value easier and reduces
the chance of introducing a new point of exit without resetting
the return value back to -1.
https://bugzilla.redhat.com/show_bug.cgi?id=1293351
Since we already have virtio channel events, we know when guest
agent within guest has (dis-)connected. Instead of us blindly
connecting to a socket that no one is listening to, we can just
follow what qemu-ga does. This has a nice benefit that we don't
need to 'guest-ping' the agent just to timeout and find out
nobody is listening.
The way that this commit is implemented:
- don't connect in qemuProcessLaunch directly, defer that to event
callback (which already follows the agent) -
processSerialChangedEvent
- after migration is settled, before we resume vCPUs, ask qemu
whether somebody is listening on the socket and if so, connect
to it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.
Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.
Narrowed down the list of #include's in the split out module to
those that are necessary for build.
Recent refactors in the vbox code to check the return status for the
function tipped Coverity's scales of justice for any functions that
do not check status - such as this one.
While I'm at it, since the call is essentially the same other than
whether starting from val or val+1 when val[0] = '[', just adjust
the val pointer by one and have one call instead of two.
Additionally, the call to virDomainGraphicsListenGetAddress is redundant
since it checking that the address field got filled. It's a leftover
from the strndup -> ListenSetAddress conversion (commit id 'ef79fb5b5')
Signed-off-by: John Ferlan <jferlan@redhat.com>
Refactor qemuParseCommandLine to pull out the "-vnc" argument parsing
into its own helper function. Modify the code to use "cleanup" instead
of "error" and use the standard return processing to indicate success
or failure by using ret
Signed-off-by: John Ferlan <jferlan@redhat.com>
The function, like others in our code, returns zero on success
and a negative value on error. However, there are two places in
xenconfig source code where we check for non-zero value. While
the function can't currently return a positive value, those
checks look okay, but does not really follow our style.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch introduces keep alive messages support for P2P migration
and it adds two new configuration entries namely 'keepalive_interval'
'keepalive_count' to control it. Behavior of these entries is the
same as qemu driver thus the description is copied from there
with just a few simplifications.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Introduce support for VIR_MIGRATE_PEER2PEER in libvirt migration.
Most of the changes occur at the source and no modifications at
the receiver.
In P2P mode there is only the Perform phase so we must handle the
connection with the destination and actually perform the
migration. libxlDomainPerformP2P implements the connection to the
destination and libxlDoMigrateP2P implements the actual migration
logic with virConnectPtr. In this function we take care of doing
all phases of migration in the destination similar to
virDomainMigrateVersion3Full. We appropriately save the last
error reported in each of the phases to provide proper reporting.
We don't yet support VIR_MIGRATE_TUNNELED and we always use V3
with extensible params, thus it also makes the implementation
simpler.
It is worth noting that the receiver didn't have any changes, and
since it's still the v3 sequence thus it is possible to migrate
from a P2P to non-P2P host.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virStringListLength function does not ever modify the passed
string list. It merely counts the items in it. Make sure that we
reflect this bit in the function header.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
(crobinso: fix up spacing and squash in sheepdog bit suggested
by Andrea)
Older gcc fails to see that the variable is set iff @hasPriority
== true in which case the former is set a value. Initialize the
value while declaring it to make the compiler shut up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Allocate it as soon as we know we will need it.
Add it to def->ngraphics if it's allocated, removing the need
to use the addDesktop and totalPresent variables to track this.
Separate allocation of the def->graphics array from the allocation
and initialization of its first element.
Note that the only possible values of totalPresent at this point
are 0 or 1, because it equals to guiPresent + sdlPresent.
When FRONTEND/Type is not any of "sdl", "gui", "vrdp", we add a DESKTOP.
Use a bool to track this, instead of checking that both
totalPresent ("sdl" or "gui" present) and vrdpPresent are zero.
For the actions ADD and OLD, split out creating the new lease object,
as well as getting the environment variables that do not affect
the parsing of command line arguments.
Since majority of the steps is shared, the function can be reused to
simplify code.
Similarly to previous path doing this same for vCPUs this also fixes the
a similar bug (which is not tracked).
Rather than iterating 3 times for various settings this function
aggregates all the code into single place. One of the other advantages
is that it can then be reused for properly setting IOThread info on
hotplug.
Since majority of the steps is shared, the function can be reused to
simplify code.
Additionally this resolves
https://bugzilla.redhat.com/show_bug.cgi?id=1244128 since the cpu
bandwidth limiting with cgroups would not be set on the hotplug path.
Additionally the code now sets the thread affinity and honors autoCpuset
as in the regular startup code path.
Rather than iterating 3 times for various settings this function
aggregates all the code into single place. One of the other advantages
is that it can then be reused for properly setting vCPU info on hotplug.
With this approach autoCpuset is also used when setting the process
affinity rather than just via cgroups.
Commit 8cd1d54 consolidates both daemon and remote driver typed param
serialization functions. The consolidation now enforces client to use
VIR_TYPED_PARAM_STRING_OKAY flag to properly serialize string parameters, which
server has used for quite some time now. And this caused an issue, since the
commit had not adjusted client remote calls appropriately, thus causing a
failure in blkiotune, numatune and migration APIs (as per Xen CI tests). This
patch adjusts both remote_driver.c and gendispatch.pl to properly address this
issue.
http://lists.xenproject.org/archives/html/xen-devel/2016-02/msg01012.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In the commit 7938b533 we've changed the function signature,
however forgot to update stump that's used on systems without
CGroups causing a build failure.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Due to bad design the vcpu sched element is orthogonal to the way how
the data belongs to the corresponding objects. Now that vcpus are a
struct that allow to store other info too, let's convert the data to the
sane structure.
The helpers for the conversion are made universal so that they can be
reused for iothreads too.
This patch also resolves https://bugzilla.redhat.com/show_bug.cgi?id=1235180
since with the correct storage approach you can't have dangling data.
Now that qemuDomainDetectVcpuPids is able to refresh the vCPU pid
information it can be reused in the hotplug and hotunplug code paths
rather than open-coding a very similar algorithm.
A slight algorithm change is necessary for unplug since the vCPU needs
to be marked offline prior to calling the thread detector function and
eventually rolled back if something fails.
Move the logic from virDomainDiskDefDstDuplicates into
virDomainDiskDefCheckDuplicateInfo so that we don't have to loop
multiple times through the array of disks. Since the original function
was called in qemuBuildDriveDevStr, it was actually called for every
single disk which was quite wasteful.
Additionally the target uniqueness check needed to be duplicated in
the disk hotplug case, since the disk was inserted into the domain
definition after the device string was formatted and thus
virDomainDiskDefDstDuplicates didn't do anything in that case.
When starting a qemu process there are certain checks done to ensure
that the configuration makes sense. Extract them into a separate
function so that they can be reused in the test code.
In b3d2a42e I've refactored the code and moved the 'cleanup' label.
Unfortunately the code that was originally in the 'endjob' label and
wanted to jump to cleanup is now in the cleanup label. Remove the jump
and let the function finish.
If we are attempting to thaw the filesystems on error, the code would
overwrite the error code that caused the snapshot to fail with the error
of thawing the filesystem. Since the thawing function allows control of
error reporting behavior we can use this feature.
Add a stub for nodeDeviceSysfsGetPCIRelatedDevCaps() for non-Linux
platforms. It allows nodedev driver to work on non-Linux platoforms
that, however, have HAL.
Syntax-check fails with:
cppi: src/bhyve/bhyve_driver.h: line 26: not properly indented
cppi: src/bhyve/bhyve_driver.h: line 27: not properly indented
maint.mk: incorrect preprocessor indentation
Fix by properly indenting '#include's.
Pushed as trivial.
After 1036ddadb2 we use bhyveDriverGetCapabilities from other
sources too, not only from bhyve_driver.c. However, the function
was static so not properly expose to other files. In order to
expose it, we need to move couple of #include-s too.
Then, there has been a copy paste error in
virBhyveProcessReconnect: s/privconn/data->driver/.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This was only used in debugging messages and not in any real code.
Ceph/RBD uses uint64_t for sizes internally and they can be printed
with %zu without any need for casting.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Through the years the RBD storage pool code hasn't maintained the
same or correct coding standard which applies to libvirt.
This patch doesn't change any logic in the code, it only applies
the proper coding standards to the code where possible without
making large changes.
This way the code style used in this storage pool is consistent
throughout the whole file.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
I've noticed that variable @reply is not initialized and if
something at the beginning of the function fails, e.g.
virDBusGetSystemBus(), the control jump straight to cleanup label
where dbus_message_unref() is then called over this uninitialized
variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed couple of warning in dmesg while debugging
something:
[ 9683.973754] HTB: quantum of class 10001 is big. Consider r2q change.
[ 9683.976460] HTB: quantum of class 10002 is big. Consider r2q change.
I've read the HTB documentation and linux kernel code to find out
what's wrong. Basically we need to pass another argument
"quantum" to our tc cmd line because the default computed by HTB
does not always work in which case the warning message is printed
out.
You can read more details here:
http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm#sharing
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As the scheduler info elements are represented orthogonally to how it
makes sense to actually store the information, the extracted code will
be later used when converting between XML and internal definitions.
So, systemd-machined has this philosophy that machine names are like
hostnames and hence should follow the same rules. But we always allowed
international characters in domain names. Thus we need to modify the
machine name we are passing to systemd.
In order to change some machine names that we will be passing to systemd,
we also need to call TerminateMachine at the end of a lifetime of a
domain. Even for domains that were started with older libvirt. That
can be achieved thanks to virSystemdGetMachineNameByPID(). And because
we can change machine names, we can get rid of the inconsistent and
pointless escaping of domain names when creating machine names.
So this patch modifies the naming in the following way. It creates the
name as <drivername>-<id>-<name> where invalid hostname characters are
stripped out of the name and if the resulting name is longer, it
truncates it to 64 characters. That way we can start domains we
couldn't start before. Well, at least on systemd.
To make it work all together, the machineName (which is needed only with
systemd) is saved in domain's private data. That way the generation is
moved to the driver and we don't need to pass various unnecessary
arguments to cgroup functions.
The only thing this complicates a bit is the scope generation when
validating a cgroup where we must check both old and new naming, so a
slight modification was needed there.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1282846
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The virDomainSnapshotDefFormat calls into virDomainDefFormat,
so should be providing a non-NULL virCapsPtr instance. On the
qemu driver we change qemuDomainSnapshotWriteMetadata to also
include caps since it calls virDomainSnapshotDefFormat.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virDomainObjFormat and virDomainSaveStatus methods
both call into virDomainDefFormat, so should be providing
a non-NULL virCapsPtr instance.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rather than have a unwieldy regex string - split it up into its components
each having it's own #define and then combine in a different #define
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use the newly added virCapabilitiesSetNetPrefix to set
the network prefix for the driver. This in return will
be use by NetDefFormat() and NetDefParseXML() routines
to free any interface name that start with the registered
prefix.
Acked-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
virDomainSaveConfig calls virDomainDefFormat which was setting the caps
to NULL, thus keeping the old behaviour (i.e. not looking at
netprefix). This patch adds the virCapsPtr to the function and allows
the configuration to be saved and skipping interface names that were
registered with virCapabilitiesSetNetPrefix().
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix (if it exists) for
interface names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
And use the newly added caps->host.netprefix for free interface
names that match the autogenerated target names.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
In the reverted commit d2e5538b1, the libxl driver was changed to copy
interface names autogenerated by libxl to the corresponding network def
in the domain's virDomainDef object. The copied name is freed when the
domain transitions to the shutoff state. But when migrating a domain,
the autogenerated name is included in the XML sent to the destination
host. It is possible an interface with the same name already exists on
the destination host, causing migration to fail.
This patch defines a new capability for setting the network device
prefix that will be used in the driver. Valid prefixes are
VIR_NET_GENERATED_PREFIX or the one announced by the driver.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
There are slight differences in various ZFS implementations.
Specifically, ZFS on FreeBSD requires to set value of 'volmode'
option to 'dev' to expose volumes as raw disk device (that's what
we need) rather than geom provides, for example.
With ZFS on Linux, however, such option is not available and
volumes exposed like we need by default.
To make our implementation more flexible, only pass 'volmode'
when it's supported. Support is checked by parsing usage
information of the 'zfs get' command.
Same as for deserializer, this method might get handy for admin one day.
The major reason for this patch is to stay consistent with idea, i.e.
when deserializer can be shared, why not serializer as well. The only
problem to be solved was that the daemon side serializer uses a code
snippet which handles sparse arrays returned by some APIs as well as
removes any string parameters that can't be returned to older clients.
This patch makes of the new virTypedParameterRemote datatype introduced
by one of the pvious patches.
Since the method is static to remote_driver, it can't even be used by our
daemon. Other than that, it would be useful to be able to use it with admin as
well. This patch uses the new virTypedParameterRemote datatype introduced in
one of previous patches.
Currently, the deserializer is hardcoded into remote_driver which makes
it impossible for admin to use it. One way to achieve a shared implementation
(besides moving the code to another module) would be pass @ret_params_val as a
void pointer as opposed to the remote_typed_param pointer and add a new extra
argument specifying which of those two protocols is being used and typecast
the pointer at the function entry. An example from remote_protocol:
struct remote_typed_param_value {
int type;
union {
int i;
u_int ui;
int64_t l;
uint64_t ul;
double d;
int b;
remote_nonnull_string s;
} remote_typed_param_value_u;
};
typedef struct remote_typed_param_value remote_typed_param_value;
struct remote_typed_param {
remote_nonnull_string field;
remote_typed_param_value value;
};
That would leave us with a bunch of if-then-elses that needed to be used across
the method. This patch takes the other approach using the new datatype
introduced in one of earlier commits.
Both admin and remote protocols define their own types
(remote_typed_param vs admin_typed_param). Because of the naming convention,
admin typed params wouldn't be able to reuse the serialization/deserialization
methods, which are tailored for use by remote protocol, even if those method
were exported properly. In that case, introduce a new internal data type
structurally copying both admin and remote protocols which, eventually, would
allow serializer and deserializer to be used in a more generic way.
A pretty nasty deadlock occurs while trying to rename a VM in parallel
with virDomainObjListNumOfDomains.
The short description of the problem is as follows:
Thread #1:
qemuDomainRename:
------> aquires domain lock by qemuDomObjFromDomain
---------> waits for domain list lock in any of the listed functions:
- virDomainObjListFindByName
- virDomainObjListRenameAddNew
- virDomainObjListRenameRemove
Thread #2:
virDomainObjListNumOfDomains:
------> aquires domain list lock
---------> waits for domain lock in virDomainObjListCount
Introduce generic virDomainObjListRename function for renaming domains.
It aquires list lock in right order to avoid deadlock. Callback is used
to make driver specific domain updates.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Free the old vcpupids array in case when this function is called again
during the run of the VM. It will be later reused in the vCPU hotplug
code. The function now returns the number of detected VCPUs.
In some cases it may be better to have a bitmap representing state of
individual vcpus rather than iterating the definition. The new helper
creates a bitmap representing the state from the domain definition.
Use 'ret' for return variable name, clarify use of 'param_idx' and avoid
unnecessary 'success' label. No functional changes. Also document the
function.
Since commit 7140807917 we are generating
socket path later than before -- when starting a domain. That makes one
particular inconsistent state of a chardev, which was not possible
before, currently valid. However, SELinux security driver forgot to
guard the main restoring function by a check for NULL-paths. So make it
no-op for NULL paths, as in the DAC driver.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1300532
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In case of guest panicked, preserved crashed domain has stopped CPUs.
It's not possible to use tools like WinDbg for the problem investigation
until we start CPUs back.
Error paths after sending the event that domain is started written as if ret = -1
which is set at the beginning of the function. It's common idioma to keep 'ret'
equal to -1 until the end of function where it is set to 0. But here we use ret
to keep result of restore operation too and thus breaks the idioma and its users :)
Let's use different variable to hold restore result.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Rather than a loop reallocating space to build the regex, just allocate
it once up front, then if there's more than 1 nextent, append a comma and
another regex_unit string.
Signed-off-by: John Ferlan <jferlan@redhat.com>
The 'stripes' value is described as the "Number of stripes or mirrors in
a logical volume". So add "mirror" and anything that starts with "raid"
to the list of segtypes that can have an 'nextents' value greater than one.
Use of raid segtypes (raid1, raid4, raid5*, raid6*, and raid10) is favored
over mirror in more recent lvm code.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than preallocating a set number of elements, then walking through
the extents and adjusting the specific element in place, use the APPEND
macros to handle that chore.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Having on_crash set to either coredump-destroy or coredump-restart
creates core dumps with option memory-only in the directory specified
by auto_dump_path. When a watchdog is triggered with the action dump
the core dump is also placed into the directory specified by auto_dump_path
but is created without the option memory-only.
This patch sets the option memory-only also for core dumps created by the
watchdog event.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Create a helper routine in order to parse any extents information
including the extent size, length, and the device string contained
within the generated 'lvs' output string.
A future patch would then be able to avoid the code more cleanly
Signed-off-by: John Ferlan <jferlan@redhat.com>
By opening a RBD volume in Read-Only we do not register a
watcher on the header object inside the Ceph cluster.
Refreshing a volume only calls rbd_stat() which is a operation
which does not write to a RBD image.
This allows us to use a cephx user which has no write
permissions if we would want to use the libvirt storage pool
for informational purposes only.
It also saves us a write into the Ceph cluster which should
speed up refreshing a RBD pool.
rbd_open_read_only() is available in all librbd versions which
also support rbd_open().
Signed-off-by: Wido den Hollander <wido@widodh.nl>
RBD supports cloning by creating a snapshot, protecting it and create
a child image based on that snapshot afterwards.
The RBD storage driver will try to find a snapshot with zero deltas between
the current state of the original volume and the snapshot.
If such a snapshot is found a clone/child image will be created using
the rbd_clone2() function from librbd.
rbd_clone2() is available in librbd since Ceph version Dumpling (0.67) which
dates back to August 2013.
It will use the same features, strip size and stripe count as the parent image.
This implementation will only create a single snapshot on the parent image if
never changes. This reduces the amount of snapshots created for that RBD image
which benefits the performance of the Ceph cluster.
During build the decision will be made to use either rbd_diff_iterate() or
rbd_diff_iterate2().
The latter is faster, but only available on Ceph versions after 0.94 (Hammer).
Cloning is only supported if RBD format 2 is used. All images created by libvirt
are already format 2.
If a RBD format 1 image is used as the original volume the backend will report
a VIR_ERR_OPERATION_UNSUPPORTED error.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Using VIR_STORAGE_VOL_WIPE_ALG_TRIM a RBD volume can be trimmed down
to 0 bytes using rbd_discard()
Effectively all the data on the volume will be lost/gone, but the volume
remains available for use afterwards.
Starting at offset 0 the storage pool will call rbd_discard() in stripe
size * count increments which is usually 4MB. Stripe size being 4MB and
count 1.
rbd_discard() is available since Ceph version Dumpling (0.67) which dates
back to August 2013.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
This new algorithm adds support for wiping volumes using TRIM.
It does not overwrite all the data in a volume, but it tells the
backing storage pool/driver that all bytes in a volume can be
discarded.
It depends on the backing storage pool how this is handled.
A SCSI backend might send UNMAP commands to remove all data present
on a LUN.
A Ceph backend might use rbd_discard() to instruct the Ceph cluster
that all data on that RBD volume can be discarded.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When wiping the RBD image will be filled with zeros started
at offset 0 and until the end of the volume.
This will result in the RBD volume growing to it's full allocation
on the Ceph cluster. All data on the volume will be overwritten
however, making it unavailable.
It does NOT take any RBD snapshots into account. The original data
might still be in a snapshot of that RBD volume.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
Use the cast of (virStorageVolWipeAlgorithm) adding the missing case:'s
(VIR_STORAGE_VOL_WIPE_ALG_ZERO and VIR_STORAGE_VOL_WIPE_ALG_LAST).
Additionally, the old code would also still run the SCRUB command on
default since it didn't go to cleanup when a invalid flag was supplied.
We now go to cleanup and exit if a invalid flag would be provided.
Signed-off-by: Wido den Hollander <wido@widodh.nl>
When commit id '82c1740a' made changes to the output format (changing from
using a ',' separator to '#'), the examples in the lvs output from the
comments weren't changed.
Additionally, the two new fields added ('segtype' and 'stripes') were
not included in the output, leaving it well confusing.
This patch fixes the sample output, adds a 'striped' example, and makes
other comment related adjustments for long line and spacing between followup
'NB' remarks (while I'm there).
Signed-off-by: John Ferlan <jferlan@redhat.com>
The affected functions are:
virPCIDeviceGetManaged()
virPCIDeviceGetUnbindFromStub()
virPCIDeviceGetRemoveSlot()
virPCIDeviceGetReprobe()
Change their return type from unsigned int to bool: the corresponding
members in struct _virPCIDevice are defined as bool, and even the
corresponding virPCIDeviceSet*() functions take a bool value as input
so there's no point in these functions having unsigned int as return
type.
Suggested-by: John Ferlan <jferlan@redhat.com>
In our generator for some code we put empty lines in the output
to separate blocks of code. However, in some cases we put couple
of spaces on the empty line too. It's not bug, it just isn't
nice.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Unbinding a PCI device from the stub driver can require several steps,
and it can be useful for debugging to be able to trace which of these
steps are performed and which are skipped for each device.
The name is confusing, and there are just two uses: one is a test case,
and the other will be removed as part of an upcoming refactoring of
the hostdev code.
Commit 871e10f fixed a memory corruption error, but called strlen()
twice on the same string to do so. Even though the compiler is
probably smart enough to optimize the second call away, having a
single invocation makes the code slightly cleaner.
Suggested-by: Michal Privoznik <mprivozn@redhat.com>
In 370608b4c7 we have introduced two new internal APIs.
However, there are no stubs for build without macvtap. Therefore
build on systems lacking macvtap support (e.g. mingw or freebds)
fails when trying to link.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
libvirtd crashes on free()ing portData for an open vswitch port if that port
was deleted. To reproduce:
ovs-vsctl del-port vnet0
virsh migrate --live kvm1 qemu+ssh://dstHost/system
Error message:
libvirtd: *** Error in `/usr/sbin/libvirtd': free(): invalid pointer: 0x000003ff90001e20 ***
The problem is that virCommandRun can return an empty string in the event that
the port being queried does not exist. When this happens then we are
unconditionally overwriting a newline character at position strlen()-1. When
strlen is 0, we overwrite memory that does not belong to the string.
The fix: Only overwrite the newline if the string is not empty.
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
This patch creates two bitmaps, one for macvlan device names and one
for macvtap. The bitmap position is used to indicate that libvirt is
currently using a device with the name macvtap%d/macvlan%d, where %d
is the position in the bitmap. When requested to create a new
macvtap/macvlan device, libvirt will now look for the first clear bit
in the appropriate bitmap and derive the device name from that rather
than just starting at 0 and counting up until one works.
When libvirtd is restarted, the qemu driver code that reattaches to
active domains calls the appropriate function to "re-reserve" the
device names as it is scanning the status of running domains.
Note that it may seem strange that the retry counter now starts at
8191 instead of 5. This is because we now don't do a "pre-check" for
the existence of a device once we've reserved it in the bitmap - we
move straight to creating it; although very unlikely, it's possible
that someone has a running system where they have a large number of
network devices *created outside libvirt* named "macvtap%d" or
"macvlan%d" - such a setup would still allow creating more devices
with the old code, while a low retry max in the new code would cause a
failure. Since the objective of the retry max is just to prevent an
infinite loop, and it's highly unlikely to do more than 1 iteration
anyway, having a high max is a reasonable concession in order to
prevent lots of new failures.
In the following cases nl_recv() was returning the error "No buffer
space available":
* When switching CPUs to offline/online in a system more than 128 cpus
* When using virsh to destroy domain in a system with many interfaces
This patch sets the buffer size for all netlink sockets created by
libnl to 128K and turns on message peeking for nl_recv(). This
eliminates the "No buffer space available" errors seen in the cases
above, and also preempts other future errors the smaller buffers could
have caused.
Signed-off-by: Leno Hou <houqy@linux.vnet.ibm.com>
Signed-off-by: Laine Stump <laine@laine.org>
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
In dc576025c3 we renamed virCgroupIsolateMount function to
virCgroupBindMount. However, we forgot about one occurrence in
section of the code which provides stubs for platforms without
support for CGroups like *BSD for instance.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
On the host when we start a container, it will be
placed in a cgroup path of
/machine.slice/machine-lxc\x2ddemo.scope
under /sys/fs/cgroup/*
Inside the containers' namespace we need to setup
/sys/fs/cgroup mounts, and currently will bind
mount /machine.slice/machine-lxc\x2ddemo.scope on
the host to appear as / in the container.
While this may sound nice, it confuses applications
dealing with cgroups, because /proc/$PID/cgroup
now does not match the directory in /sys/fs/cgroup
This particularly causes problems for systems and
will make it create repeated path components in
the cgroup for apps run in the container eg
/machine.slice/machine-lxc\x2ddemo.scope/machine.slice/machine-lxc\x2ddemo.scope/user.slice/user-0.slice/session-61.scope
This also causes any systemd service that uses
sd-notify to fail to start, because when systemd
receives the notification it won't be able to
identify the corresponding unit it came from.
In particular this break rabbitmq-server startup
Future kernels will provide proper cgroup namespacing
which will handle this problem, but until that time
we should not try to play games with hiding parent
cgroups.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The VIR_DOMAIN_STATS_VCPU flag to virDomainListGetStats
enables reporting of stats about vCPUs. Currently we
only report the cumulative CPU running time and the
execution state.
This adds reporting of the wait time - time the vCPU
wants to run, but the host scheduler has something else
running ahead of it.
The data is reported per-vCPU eg
$ virsh domstats --vcpu demo
Domain: 'demo'
vcpu.current=4
vcpu.maximum=4
vcpu.0.state=1
vcpu.0.time=1420000000
vcpu.0.wait=18403928
vcpu.1.state=1
vcpu.1.time=130000000
vcpu.1.wait=10612111
vcpu.2.state=1
vcpu.2.time=110000000
vcpu.2.wait=12759501
vcpu.3.state=1
vcpu.3.time=90000000
vcpu.3.wait=21825087
In implementing this I notice our reporting of CPU execute
time has very poor granularity, since we are getting it
from /proc/$PID/stat. As a future enhancement we should
prefer to get CPU execute time from /proc/$PID/schedstat
or /proc/$PID/sched (if either exist on the running kernel)
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Report
error: invalid argument: requested vcpu '100' is not present in the domain
instead of
error: invalid argument: requested vcpu is higher than allocated vcpus
Since 'savevm' was not converted to QMP libvirt has to parse for error
strings in the text monitor output. One of the unhandled errors is
produced when qemu treats a device as unmigratable.
As current qemu actually does support AHCI migration this bug is
applicable only to older versions of qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1293899
Make bhyveload respect boot order as specified by os.boot section of the
domain XML or by "boot order" for specific devices. As bhyve does not
support a real boot order specification right now, it's just about
choosing a single device to boot from.
libvirt always resets the MAC address of the physdev used for macvtap
passthrough when the guest is finished with it. This was happening
prior to the 802.1Qb[gh] DISASSOCIATE command, and was quite often
failing, presumably because the driver wouldn't allow the MAC address
to be reset while the association was still active, with a log message
like this:
virNetDevSetMAC:168 : Cannot set interface MAC to 00:00:00:00:00:00 on 'eth13': Cannot assign requested address
This patch changes the order - we now do the 802.1Qb[gh] disassociate
and delete the macvtap interface first, then and reset the MAC
address.
'free' on fedora23 wants to use the Slab field for calculated used
memory. The equation is:
used = MemTotal - MemFree - (Cached + Slab) - Buffers
We already set Cached and Buffers to 0, do the same for Slab and its
related values
https://bugzilla.redhat.com/show_bug.cgi?id=1300781
'free' on Fedora 23 will use MemAvailable to calculate its 'available'
field, but we are passing through the host's value. Set it to match
MemFree, which is what 'free' will do for older linux that don't have
MemAvailable
https://bugzilla.redhat.com/show_bug.cgi?id=1300781
We virtualize bits of /proc/meminfo by replacing host values with
values specific to the container.
However for calculating the final size of the returned data, we are
using the size of the original file and not the altered copy, which
could give garbelled output.
... and consolidate the cmdline/extra/root parsing to facilitate doing
so.
The logic is the same as xl's parse_cmdline from the current xen.git master
branch (e6f0e099d2c17de47fd86e817b1998db903cab61).
On the formatting side switch to producing cmdline= instead of extra=.
Update a few tests and add serveral more.
- test-cmdline is added to test the exclusive use of cmdline.
- test-fullvirt-direct-kernel-boot.cfg is updated due to the switch
on the formatting side and now tests the exclusive use of cmdline=.
- Tests are added for both paravirt and fullvirt where the .cfg uses
extra= and (paravirt only) root=. These are format (xl->xml) only
since the inverse will generate cmdline= hence is not a round trip
(which was already true if using root=, which used to generate
extra= on the way back).
- Tests are added for both paravirt and fullvirt where the .cfg
declares cmdline= as well as bogus extra= and (paravirt only) root=
entries which should be ignored. Again these are format only tests
since the inverse won't include the bogus lines.
The last two bullets here required splitting the DO_TEST macro into
two halves, as is done in the xmconfigtest.c case.
In order to introduce a use of VIR_WARN for logging I had to add
virerror.h and VIR_LOG_INIT.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
As suggested in a previous thread [0] this patch adds some missing calls
to libxl_dominfo_{init,dispose} when doing some of the libxl_domain_info
operations which would otherwise lead to memory leaks.
[0]
https://www.redhat.com/archives/libvir-list/2015-September/msg00519.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
The virErrorDomain enum has VIR_FROM_XEN, VIR_FROM_XEND,
VIR_FROM_XENSTORE, VIR_FROM_SEXPR, and VIR_FROM_XENXM. Use
these elements in the corresponding .c files. While at it,
remove the VIR_FROM_THIS define in src/xenconfig/xenxs_private.h.
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
When acpi is used to reboot/shutdown qemu domain, qemu emits
SHUTDOWN event. Libvirt uses fakeReboot variable in order to
differentiate reboot or shutdown. fakeReboot value is reseted
to false after domain restart/reset.
When mode=agent is used to reboot qemu domain, qemu doesn't emit
SHUTDOWN event and libvirt doesn't reset fakeReboot value to false.
In this case next 'shutdown -h now' performs reboot. That's why
we don't need to set fakeReboot=true for mode=agent.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
