https://bugzilla.redhat.com/show_bug.cgi?id=1031696
When creating a new domain, we let systemd know about it by calling
CreateMachine() function via dbus. Systemd then creates a scope and
places domain into it. However, later when the host is shutting
down, systemd computes the shutdown order to see what processes can
be shut down in parallel. And since we were not setting
dependencies at all, the slices (and thus domains) were most likely
killed before libvirt-guests.service. So user domains that had to
be saved, shut off, whatever were in fact killed. This problem can
be solved by letting systemd know that scopes we're creating must
not be killed before libvirt-guests.service.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6515889 broke the build on FreeBSD:
In function `qemuDomainGetCPUStats':
/../../src/qemu/qemu_driver.c:16102:
undefined reference to `virCgroupGetDomainTotalCpuStats'
https://bugzilla.redhat.com/show_bug.cgi?id=1038363
If a domain has a different maximum for persistent and live maxmem
or max vcpus, then it is possible to hit cases where libvirt
refuses to adjust the current values or gets halfway through
the adjustment before failing. Better is to determine up front
if the change is possible for all requested flags.
Based on an idea by Geoff Franks.
* src/qemu/qemu_driver.c (qemuDomainSetMemoryFlags): Compute
correct maximum if both live and config are being set.
(qemuDomainSetVcpusFlags): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
The virDomainGetRootFilesystem method can be generalized to allow
any filesystem path to be obtained.
While doing this, start a new test case for purpose of testing various
helper methods in the domain_conf.{c,h} files, such as this one.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The virCgroupXXX APIs' return value must be checked for
being less than 0, not equal to 0.
An VIR_ERR_OPERATION_INVALID error must also be raised
when the VM is not running to prevent a crash on NULL
priv->cgroup field.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
And provide domain summary stat in that case, for lxc backend.
Use case is a container inheriting all devices from the host,
e.g. when doing application containerization.
Destroying a suspended domain needs special action.
We cannot simply terminate all process because they are frozen.
Do deal with that we send them SIGKILL and thaw them.
Upon wakeup the process sees the pending signal and dies immediately.
Signed-off-by: Richard Weinberger <richard@nod.at>
IN6ADDR_ANY_INIT does not seem to be working as expected on MinGW:
error: missing braces around initializer [-Werror=missing-braces]
.sin6_addr = IN6ADDR_ANY_INIT,
Use the in6addr_any variable instead.
Reported by Daniel P. Berrange.
Currently, networkRunHook() is called in networkAllocateActualDevice and
friends. These functions, however, doesn't necessarily work on networks,
For example, if domain's interface is defined in this fashion:
<interface type='bridge'>
<mac address='52:54:00:0b:3b:16'/>
<source bridge='virbr1'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x09' function='0x0'/>
</interface>
The networkAllocateActualDevice jumps directly onto 'validate' label as
the interface is not type of 'network'. Hence, @network is left
initialized to NULL and networkRunHook(network, ...) is called. One of
the things that the hook function does is dereference @network. Soupir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Dumping a domain's core can take considerable time. Use the
recently added job functions and unlock the virDomainObj while
dumping core.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Saving domain memory and cpu state can take considerable time.
Use the recently added job functions and unlock the virDomainObj
while saving the domain.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
When explicitly destroying a domain (libxlDomainDestroyFlags), or
handling an out-of-band domain shutdown event, cleanup the domain
in the context of a job. Introduce libxlVmCleanupJob to wrap
libxlVmCleanup in a job block.
Large balloon operation can be time consuming. Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Creating a large domain could potentially be time consuming. Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This function, which only has five call sites, simply calls
libxl_domain_destroy and libxlVmCleanup. Call those functions
directly at the call sites, allowing more control over how a
domain is destroyed and cleaned up. This patch maintains the
existing semantic, leaving changes to a subsequent patch.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
This patch changes network device type used by default from rtl8139
to virtio when architecture type is aarch64 and machine type is virt.
Qemu doesn't support any other machine types for aarch64 right now and
we can't make any other aarch64-specific tuning in this function yet.
Signed-off-by: Oleg Strikov <oleg.strikov@canonical.com>
At this point it has a limited functionality and is highly
experimental. Supported domain operations are:
* define
* start
* destroy
* dumpxml
* dominfo
It's only possible to have only one disk device and only one
network, which should be of type bridge.
There is no keyboard working on PPC64 and PS2 mouse is only for X86
when graphics are enabled.
Add a USB keyboard and USB mouse for PPC64 when graphics are enabled.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Format qemu command line for USB keyboard
and add test cases for it.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
PS2 devices only work on X86 platform, other platforms may need
USB devices instead. Athough it doesn't influence the QEMU command line,
it's not right to add PS2 mouse/keyboard for non-X86 platform.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
There is no keyboard support currently in libvirt.
For some platforms (PPC64 QEMU) this makes graphics unusable,
since the keyboard is not implicit and it can't be added via libvirt.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
The networkNotifyActualDevice function is accepting two arguments, not
one:
qemu/qemu_process.c: In function 'qemuProcessNotifyNets':
qemu/qemu_process.c:2776:47: error: macro "networkNotifyActualDevice" passed 2 arguments, but takes just 1
if (networkNotifyActualDevice(def, net) < 0)
^
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
aebbcdd didn't change the non-linux definition of the function,
breaking the build on FreeBSD:
../../src/util/virinitctl.c:164: error: conflicting types for
'virInitctlSetRunLevel'
../../src/util/virinitctl.h:40: error: previous declaration of
'virInitctlSetRunLevel' was here
Basically, the idea is copied from domain code, where tainting
exists for a while. Currently, only one taint reason exists -
VIR_NETWORK_TAINT_HOOK to mark those networks which caused invoking
of hook script.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There might be some use cases, where user wants to prepare the host or
its environment prior to starting a network and do some cleanup after
the network has been shut down. Consider all the functionality that
libvirt doesn't currently have as an example what a hook script can
possibly do.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In the next patch I'm going to need the network format function that
takes virBuffer as argument. However, slightly change of name is more
appropriate then: virNetworkDefFormatBuf to match the rest of functions
that format an object to buffer.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rewrite multiple hotunplug functions to to use the
virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with an absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevMiscLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevStorageLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceHostdevSubsysUSBLive function
to use the virProcessRunInMountNamespace helper. This avoids
risk of a malicious guest replacing /dev with a absolute
symlink, tricking the driver into changing the host OS
filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Rewrite lxcDomainAttachDeviceDiskLive function to use the
virProcessRunInMountNamespace helper. This avoids risk of
a malicious guest replacing /dev with a absolute symlink,
tricking the driver into changing the host OS filesystem.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Use helper virProcessRunInMountNamespace in lxcDomainShutdownFlags and
lxcDomainReboot. Otherwise, a malicious guest could use symlinks
to force the host to manipulate the wrong file in the host's namespace.
Idea by Dan Berrange, based on an initial report by Reco
<recoverym4n@gmail.com> at
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=732394
Signed-off-by: Eric Blake <eblake@redhat.com>
