Namely, virFileGetACLs, virFileSetACLs, virFileFreeACLs and
virFileCopyACLs. These functions are going to be required when we
are creating /dev for qemu. We have copy anything that's in
host's /dev exactly as is. Including ACLs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
When redoing the website we deleted the libvirtLogo.png file
not remembering that the test driver screenshot API impl
relied on it.
Rather than having the test driver use the logo as a side
effect, give it its own dedicated image to use. This is
installed in /usr/share/libvirt/test-screenshot.png and
is taken from a NeXT Cube running WorldWideWeb[1]. The
very first web browser in existance, running on the
hardware it was originally written on.
[1] https://en.wikipedia.org/wiki/WorldWideWeb
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
So far the NSS module looks up only hostnames as provided by
guests themselves. However, there are some cases where this is
not enough: e.g. when there's a fresh new guest being installed
(with some generic hostname) say from a live ISO image; or some
(older) systems don't advertise their hostname in DHCP
transactions at all.
In cases like that it would be helpful if we translate domain
name as seen by libvirt too so that users can:
# virsh start $dom && ssh $dom
In order to achieve that new libvirt-guest module is introduced,
while older libvirt module maintains its current behaviour (that
is translating guest provided names into IP addresses).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This module will be used to track:
<domain, mac address list>
pairs. It will be important to know these mappings without
libvirt connection (that is from a JSON file), because NSS
module will use those to provide better host name translation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
For a new hostdev type='scsi_host' we have a number of
required functions for managing, adding, and removing the
host device to/from guests. Provide the basic infrastructure
for these tasks.
The name "SCSIVHost" (and its variants) is chosen to avoid
conflicts with existing code named "SCSIHost" to refer to
a hostdev type='scsi' protcol='none'.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Use the util function virHostdevIsSCSIDevice() to simplify if
statements.
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Implement a new libssh transport, which uses libssh to communicate with
remote hosts, and add all the build system stuff (search of libssh,
private symbols, etc) to built it.
This new transport supports all the common ssh authentication methods,
making use of libvirt's auth callbacks for interaction with the user.
vzDomainMigrateConfirm3Params is whitelisted. Otherwise we need to
move removing domain from domain list from perform to confirm
step. This would further imply adding a flag and check that migration
is in progress to prohibit mistakenly (maliciously) removing domains
on confirm step. vz version of p2p also need to be fixed to include confirm step.
One would also need to add means to cleanup pending migration
on client disconnect as now is has state across several API
calls.
On the other hand current version of confirm step is totaly
harmless thus it is easier to whitelist it at the moment.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
When build for architecture that don't use gcc atomic ops but pthread,
it fails to build for armel:
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virClassNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:153: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:205: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectUnref':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:277: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectRef':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:298: undefined reference to `virAtomicLock'
| collect2: error: ld returned 1 exit status
It is similar with:
http://libvirt.org/git/?p=libvirt.git;a=commit;h=12dc729
Signed-off-by: Kai Kang <kai.kang@windriver.com>
The build was failing with:
CCLD lockd.la
libtool: error: can't build i686-pc-cygwin shared library unless -no-undefined is specified
Rather than add yet another $(CYGWIN_EXTRA_LDFLAGS) to all the
impacted *_la_LDFLAGS, it was easier to just pull the extra
flags into ALL libraries via AM_LDFLAGS.
Then, fix lockd_la_LDFLAGS to include AM_LDFLAGS, like all other
libraries.
Signed-off-by: Eric Blake <eblake@redhat.com>
Without XDR_CFLAGS, compilation on Cygwin fails with:
CC libvirt_driver_la-libvirt-stream.lo
In file included from libvirt-stream.c:26:0:
rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file or directory
Signed-off-by: Eric Blake <eblake@redhat.com>
First, remove escaped newlines and split up the string into an argv-list for
the bhyve and loader commands, respectively. This is done by iterating over the
string splitting it by newlines, and then re-iterating over each line,
splitting it by spaces.
Since this code reuses part of the code of qemu_parse_command.c
(in bhyveCommandLine2argv), add the appropriate copyright notices.
Signed-off-by: Fabian Freyer <fabian.freyer@physik.tu-berlin.de>
Pretending (partial) support for something we don't understand is risky.
Reporting a failure is much better.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
This patch splits virnetdev.[ch] into multiple files, with the new
virnetdevip.[ch] containing all the functions related to setting and
retrieving IP-related info for a device (both addresses and routes).
Both ARM and AArch64 drivers are exactly the same (modulo function
names). Let's use just one driver for all ARM architectures.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Move the enum into a new src/util/virsecret.h, rename it to be
virSecretLookupType. Add a src/util/virsecret.h in order to perform
a couple of simple operations on the secret XML and virSecretLookupTypeDef
for clearing and copying.
This includes quite a bit of collateral damage, but the goal is to remove
the "virStorage*" and replace with the virSecretLookupType so that it's
easier to to add new lookups that aren't necessarily storage pool related.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Add support to xenconfig for conversion of xl.cfg(5) bios config
to/from libvirt domXml <loader> config. SeaBIOS is the default
for HVM guests using upstream QEMU. ROMBIOS is the default when
using the old qemu-dm. This patch allows specifying OVMF as an
alternate firmware.
Example xl.cfg:
bios = "ovmf"
Example domXML:
<os>
...
<loader readonly='yes' type='pflash'>/usr/lib/xen/boot/ovmf.bin</loader>
</os>
Note that currently Xen does not support a separate nvram for
non-volatile variables.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
The virQEMUDriverConfig object contains lists of
loader:nvram pairs to advertise firmwares supported by
by the driver, and qemu_conf.c contains code to populate
the lists, all of which is useful for other drivers too.
To avoid code duplication, introduce a virFirmware object
to encapsulate firmware details and switch the qemu driver
to use it.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Add the virDomainLxcEnterCGroup API to the libvirt-lxc.so
file. This method moves the calling process into the cgroups
associated with the container.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move all APIs with a virHostMEM name prefix out into new
util/virhostmem.h & util/virhostmem.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We need to use the gnutls_priority_set_direct method which
was not introduced until 2.1.7, so bump version to 2.2.0
which is the first stable release with it included. This
release dates from Dec 2007 so it is reasonable to ditch
support for the 1.x.x series for gnutls releases entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The sd_notify method is used to tell systemd when libvirtd
has finished starting up. All it does is send a datagram
containing the string parameter to systemd on a UNIX socket
named in the NOTIFY_SOCKET environment variable. Rather than
pulling in the systemd libraries for this, just code the
notification directly in libvirt as this is a stable ABI
from systemd's POV which explicitly allows independant
implementations:
See "Reimplementable Independently" column in the
"$NOTIFY_SOCKET Daemon Notifications" row:
https://www.freedesktop.org/wiki/Software/systemd/InterfacePortabilityAndStabilityChart/
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1314881
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.
This API will then be shareable with qemu-img and the need to build
a security object for luks support.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We need to append GNUTLS_CFLAGS while building utils because virtcrypto
is using it. This fixes build on freebsd where gnutuls is in
/usr/local/include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move virSecretObj from secret_driver.c to virsecretobj.h
To support being able to create a hashed secrets list, move the
virSecretObj to virsecretobj.h so that the code can at least find
the definition.
This should be a temporary situation while the virsecretobj.c code
is patched in order to support a hashed secret object while still
having the linked list support in secret_driver.c. Eventually, the
goal is to move the virSecretObj into virsecretobj.c, although it
is notable that the existing model from which virSecretObj was
derived has virDomainObj in src/conf/domain_conf.h and virNetworkObj
in src/conf/network_conf.h, so virSecretObj wouldn't be unique if
it were to remain in virsecretobj.h Still adding accessors to fetch
and store hashed object data will be the end goal.
Add definitions and infrastucture in virsecretobj.c to create and
handle a hashed virSecretObj and virSecretObjList including the class,
object, lock setup, and disposal API's. Nothing will call these yet.
This infrastructure will replace the forward linked list logic
within the secret_driver, eventually.
We can't use eg. @sysconfdir@ directly in the .pod file, because
pod2man(1) will interpret that as a variable name and format it
accordingly.
Instead, we use eg. SYSCONFDIR and use a subsequent sed(1) call
to turn it into the expected @sysconfdir@.
After this commit, all man pages are generated using the same two
steps:
1. Process a source $command.pod file with pod2man(1) to obtain
a valid man page in $command.$section.in
2. Process $command.$section.in with sed(1) to obtain the final
man page in $command.$section
FreeBSD's sed(1) doesn't support using "\n" to insert a newline,
so the installed default.xml file ends up containing a literal
"n" between tags; to work around this problem, add a tr(1)
invocation as suggested by the sed FAQ[1].
[1] http://sed.sourceforge.net/sedfaq4.html (4.1 c)
According to the autoconf manual, using '$(LN_S) -f' is not
portable; remove the target explicitly beforehand to work around
this limitation.
Adjust some slightly awkward indentation while at it.
The current rule fails if the target already exists:
cd /home/jenkins/build/libvirt/lib && \
ln -s libnss_libvirt.so.1 nss_libvirt.so.1
ln: nss_libvirt.so.1: File exists
Makefile:3357: recipe for target 'install-exec-hook' failed
However, all other rules concerned with installation are
idempotent and will happily overwrite an existing target,
so this one should as well.
commit 30c61901 added new functions to libvirt_private.syms
not alpabetically sorted and erroneously added vz sources to
STATEFUL_DRIVER_SOURCE_FILES, which triggered check-aclrules
running while vz driver isn't ready for it yet.
Pushing under build-breaker rule.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Make it possible to build vz driver as a module and don't link it with
libvirt.so statically.
Remove registering it on client's side as far as we start relying on daemon
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Commit id 'fb2bd208' essentially copied the qemuGetSecretString
creating an libxlGetSecretString. Rather than have multiple copies
of the same code, create src/secret/secret_util.{c,h} files and
place the common function in there.
Modify the the build in order to build the module as a library
which is then pulled in by both the qemu and libxl drivers for
usage from both qemu_command.c and libxl_conf.c
This patch implement a set of interfaces for perf event. Based on
these interfaces, we can implement internal driver API for perf,
and get the results of perf conuter you care about.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
Message-id: 1459171833-26416-4-git-send-email-qiaowei.ren@intel.com
The implementation is pretty straightforward. Moreover, because
of the nature of things, gethostbyname_r and gethostbyname2_r can
be implemented at the same time too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
These functions are going to be reused very shortly. So instead
of duplicating the code, lets move them into utils module.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Create new modules qemu_domain_address.c and qemu_domain_address.h to
contain all the new functions and header data. Additionally move any
supporting static functions.
Make qemuDomainSupportsPCI non static.
Also, move and rename the following:
qemuSetSCSIControllerModel to qemuDomainSetSCSIControllerModel
qemuCollectPCIAddress to qemuDomainCollectPCIAddress
qemuValidateDevicePCISlotsPIIX3 to qemuDomainValidateDevicePCISlotsPIIX3
qemuAssignDevicePCISlots to qemuDomainAssignDevicePCISlots
Signed-off-by: John Ferlan <jferlan@redhat.com>
We currently blindly accept any numeric value as a GIC version, even
though only GIC v2 and GIC v3 actually exist; on the other hand, we
reject "host", which is a perfectly legitimate value for QEMU guests.
This new enumeration contains all GIC versions libvirt is aware of.
Extract out the qemuParseCommandLine{String|Pid} into their own
separate module - taking with it all the various static functions.
Causes a ripple effect with a few other modules to include the
new qemu_parse_command.h.
Narrowed down the list of #include's in the split out module to
those that are necessary for build.
The current code was a little bit odd. At first we've removed all
possible implicit input devices from domain definition to add them later
back if there was any graphics device defined while parsing XML
description. That's not all, while formating domain definition to XML
description we at first ignore any input devices with bus different to
USB and VIRTIO and few lines later we add implicit input devices to XML.
This seems to me as a lot of code for nothing. This patch may look
to be more complicated than original approach, but this is a preferred
way to modify/add driver specific stuff only in those drivers and not
deal with them in common parsing/formating functions.
The update is to add those implicit input devices into config XML to
follow the real HW configuration visible by guest OS.
There was also inconsistence between our behavior and QEMU's in the way,
that in QEMU there is no way how to disable those implicit input devices
for x86 architecture and they are available always, even without graphics
device. This applies also to XEN hypervisor. VZ driver already does its
part by putting correct implicit devices into live XML.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
When building with gcc-5 (particularly gcc-5.3.0 now) and having pdwtags
installed (package dwarves) make check fails with the following error:
$ make lock_protocol-struct
GEN lock_protocol-struct
--- lock_protocol-structs 2016-01-13 15:04:59.318809607 +0100
+++ lock_protocol-struct-t3 2016-01-13 15:05:17.703501234 +0100
@@ -26,10 +26,6 @@
virLockSpaceProtocolNonNullString name;
u_int flags;
};
-enum virLockSpaceProtocolAcquireResourceFlags {
- VIR_LOCK_SPACE_PROTOCOL_ACQUIRE_RESOURCE_SHARED = 1,
- VIR_LOCK_SPACE_PROTOCOL_ACQUIRE_RESOURCE_AUTOCREATE = 2,
-};
struct virLockSpaceProtocolAcquireResourceArgs {
virLockSpaceProtocolNonNullString path;
virLockSpaceProtocolNonNullString name;
Makefile:10415: recipe for target 'lock_protocol-struct' failed
make: *** [lock_protocol-struct] Error 1
That happens because without any specific options gcc doesn't keep enum
information in the resulting binary object. I managed to isolate the
parameters of gcc that caused this issue to disappear, however I
remember that they influenced the resulting binaries quite a bit and
were definitely not something we would want to add as mandatory to the
build process.
So to deal with this cleanly, let's take that enum and separate it out
to its own header file. Since it is only used in the lockd driver and
the protocol, lock_driver_lockd.h feels like a suitable name.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Some of the protocol files already include handing of the missing int
types such as xdr_uint64_t, some don't. To fix it everywhere, move out
of the appropriate defines to the utils/virxdrdefs.h file and include
it where needed.
Signed-off-by: Roman Bogorodskiy <bogorodskiy@gmail.com>
Commit 48cd3dfa66 introduced configuration
file for libvirt-admin but forgot to distribute it. Also the change
made to libvirt.conf in commit dbecb87f94
should've been removed thanks to introduction of separate config file.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The parameter --disable-dependency-tracking is supposed to speed up
one-time build due to the fact that it disables some dependency
extractors that, apparently, take longer time to execute. That is a
problem for code that is generated into builddir (especially some
specific subdirectory) because the directory it should be installed to
does not exists in VPATH and without the dependency tracking is not
created. Generating such file hence fails with -ENOENT. In order to
keep generating files into builddir instead of srcdir, we must create
the directory ourselves. This should finally fix the problem that is
being fixed multiple times since its introduction in commit a9fe620372
and let us continue with cleaning those parts of Makefiles that depend
on generating files into the srcdir rather than builddir as it should
be.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Our domain_conf.* files are big enough. Not only they contain XML
parsing code, but they served as a storage of all functions whose
name is virDomain prefixed. This is just wrong as it gathers not
related functions (and modules) into one big file which is then
harder to maintain. Split virDomainObjList module into a separate
file called virdomainobjlist.[ch].
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The libvirt_logd.aug and test_libvirt_logd.aug.in files
have never existed so shouldn't be in EXTRA_DIST. It was
a copy+paste mistake when closing virtlogd from virtlockd
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add the virLogManager API which allows for communication with
the virtlogd daemon to RPC program. This provides the client
side API to open log files for guest domains.
The virtlogd daemon is setup to auto-spawn on first use when
running unprivileged. For privileged usage, systemd socket
activation is used instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Define a new RPC protocol for the virtlogd daemon that provides
for handling of logs. The initial RPC method defined allows a
client to obtain a file handle to use for writing to a log
file for a guest domain. The file handle passed back will not
actually refer to the log file, but rather an anonymous pipe.
The virtlogd daemon will forward I/O between them, ensuring
file rotation happens when required.
Initially the log setup is hardcoded to cap log files at
128 KB, and keep 3 backups when rolling over, which gives
a max usage of 512 KB per guest.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Add virRotatingFileReader and virRotatingFileWriter objects
which allow reading & writing from/to files with automation
rotation to N backup files when a size limit is reached. This
is useful for guest logging when a guaranteed finite size
limit is required. Use of external tools like logrotate is
inadequate since it leaves the possibility for guest to DOS
the host in between invokations of logrotate.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Without this, building on cygwin fails with:
CC libvirt_admin_la-libvirt-admin.lo
libvirt-admin.c:25:21: fatal error: rpc/rpc.h: No such file or directory
#include <rpc/rpc.h>
^
Reported-by: Yaakov Selkowitz <yselkowi@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Commit 4e8032272f used $(builddir) in the header search
path to fix a build issue; however, $(builddir) is not defined
by old autoconf versions such as the one available in CentOS 5,
resulting in the following error:
cc1: error: /util: No such file or directory
make[3]: *** [libvirt_driver_la-fdstream.lo] Error 1
Since $(builddir) is defined to always be '.', just use that
value directly instead.
Since a9fe620372, we are generating virkeymaps.h at build
time; however, we are not including $(builddir)/util in the
header search path, so when doing a VPATH build the compiler
is unable to locate the file.
make[2]: Entering directory
`/home/jenkins/libvirt/systems/libvirt-fedora-20/build/src'
GEN util/virkeymaps.h
...
CC util/libvirt_util_la-virkeycode.lo
CC util/libvirt_util_la-virkeyfile.lo
CC util/libvirt_util_la-virlockspace.lo
CC util/libvirt_util_la-virlog.lo
../../src/util/virkeycode.c:27:24: fatal error: virkeymaps.h: No such file or directory
#include "virkeymaps.h"
^
compilation terminated.
In fact, it was never used as far as vz has no features supporting it.
That is why there will be no harm to anyone if we just remove this code to
prevent further misunderstanding and efforts to support dead code.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
At the time this code was added we had intentions to support libvirt interface
to manage vz networks. In fact, it was never implemented completely to work
correctly that makes me think that there will be no harm to anyone if we just
rip it off. Moreover, in vz7 we started to use libvirt bridge network driver to
manage networks.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We are distributing virkeymaps.h and all the tools needed to rebuild
that file. On top of that, we are generating that file into the
$(srcdir) and that sometimes fails when trying to do make dist in VPATH
on rawhide fedora. And we don't clean the file when maintainer-clean
make target is requested. So let's not distribute the file and rather
let everyone rebuild it when needed and clean it when appropriate.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Build fail and error like this:
CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo
qemu/qemu_capabilities.c:46:27: fatal error: qemu_capspriv.h: No such file or directory
#include "qemu_capspriv.h"
Add qemu_capspriv.h to source.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Commit f1f68ca334 tried fixing running multiple domains under various
users, but if the user can't browse the directory, it's hard for the
qemu running under that user to create the monitor socket.
The permissions need to be fixed in two places in the spec file due to
support for both installations with and without driver modules.
Creating a directory with '$(MKDIR_P) -m' shouldn't fail even on systems
where autoconf needs to fallback to 'install-sh -d'.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1146886
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Like we are checking for the correct order in SYM_FILES, we
should do the same for ADMIN_SYM_FILES.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have this check rule in src/Makefile: check-symfile that
should check if all symbols we wanted to export are exported.
Moreover, if we are not exporting something more. Do the same
with libvirt_admin.syms.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This patch adds feature for lxc containers to inherit namespaces.
This is very similar to what lxc-tools or docker provides. Look
for "man lxc-start" and you will find that you can pass command
args as [ --share-[net|ipc|uts] name|pid ]. Or check out docker
networking option in which you can give --net=container:NAME_or_ID
as an option for sharing +namespace.
>From this patch you can add extra libvirt option to share
namespace in following way.
<lxc:namespace>
<lxc:sharenet type='netns' value='red'/>
<lxc:shareipc type='pid' value='12345'/>
<lxc:shareuts type='name' value='container1'/>
</lxc:namespace>
The netns option is specific to sharenet. It can be used to
inherit from existing network namespace.
Co-authored: Daniel P. Berrange <berrange@redhat.com>
Since we're linking this into libvirtd we need some symbols to be public
but not part of the public API so mark them as
LIBVIRT_ADMIN_PRIVATE_<VERSION> as we do with libvirt.
Making all other symbols local makes sure we don't accidentally leak
unwanted ones.
The driver only supports VIR_ARCH_PPC64 and VIR_ARCH_PPC64LE.
Just shuffling files around and updating the build system
accordingly. No functional changes.
After upgrade to perl-5.22.0, it started complaining about one of our
scripts. The thing is that even though it works, it wants all curly
brackets escaped properly. The change is not functional, it merely gets
rid of the following error:
Unescaped left brace in regex is deprecated, passed through in regex;
marked by <-- HERE in m/^enum { <-- HERE / at -e line 3.
There is one more error like this that I'm getting, but it is because of
GNU automake bug #21001:
https://debbugs.gnu.org/cgi/bugreport.cgi?bug=21001
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
This patch moves all src/parallels/parallels* files to vz/vz*
and fixes build accordingly.
No functional changes.
Signed-off-by: Maxim Nestratov <mnestratov@parallels.com>
Initial scratch of the admin library. It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.
There's pkg-config file added and spec-file adjusted as well.
Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it. Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Fixes build problems on x86_64-cygwin host for aarch64 target:
CC lxc/libvirt_driver_lxc_impl_la-lxc_monitor_protocol.lo
In file included from lxc/lxc_monitor_protocol.c:7:0:
lxc/lxc_monitor_protocol.h:9:21: fatal error: rpc/rpc.h: No such file or directory
CC rpc/libvirt_setuid_rpc_client_la-virnetmessage.lo
In file included from rpc/virnetmessage.h:24:0,
from rpc/virnetmessage.c:26:
rpc/virnetprotocol.h:9:21: fatal error: rpc/rpc.h: No such file or directory
CC lxc/libvirt_lxc-lxc_monitor_protocol.o
In file included from lxc/lxc_monitor_protocol.c:7:0:
lxc/lxc_monitor_protocol.h:9:21: fatal error: rpc/rpc.h: No such file or directory
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
This file contains only a single function, detect_scsi_host_caps(),
which is declared in node_device_driver.h and called from both the hal
and udev backends. Other things common to the hal and udev drivers
can be placed in that file though. As a prelude to adding further
functions, this patch renames the existing function to something
closer in line with other internal libvirt function names
(nodeDeviceSysfsGetSCSIHostCaps()), and puts the declarations into a
separate .h file.
We will want to use synchronous block jobs from qemu_migration as well,
so split this function out into a new source file.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
In a lot places we use path like this:
$(srcdir)/../src/....
when in fact it can be:
$(top_srcdir)/src/
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Introduce libxl.conf configuration file, adding the 'autoballoon'
setting as the first knob for controlling the libxl driver.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Throughout the code, we have several places need to construct a path
somewhere in /sys/class/net/... They are not consistent and nearly
each code piece invents its own way how to do it. So unify this by:
1) use virNetDevSysfsFile() wherever possible
2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at
the rest of places which can't go with 1)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In some circumstances where the build tree differs from the source,
libvirt's compile will try to create the symlink for cpu_map.xml before
creating the directory $(abs_builddir)/cpu:
'src/cpu/cpu_map.xml': No such file or directory'
Do not create the symlink, it is no longer needed after
commit e562e82f
Load CPU map from builddir when run uninstalled
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
