Long ago we switched the vbox driver to run inside libvirtd to avoid
libvirt.so being polluted with GPLv2-only code. Since libvirtd is not
built on Windows, we disabled vbox on Windows builds. Thus the MSCOM
glue code is not required.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This patch introduces a new file to host domain validations from
the QEMU driver. And to get things started, let's move
qemuDomainDefValidateFeatures() to this new file.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Several daemons have similar code around general daemon startup code.
Let's move it into a file and share it among them.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Add a unit to start & stop a private dbus-daemon.
The daemon is meant to be started on demand, and associated with a
QEMU process. It should be stopped when the QEMU process is stopped.
The current policy is permissive like a session bus. Stricter
policies can be added later, following recommendations from:
https://git.qemu.org/?p=qemu.git;a=blob;f=docs/interop/dbus.rst
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This code was based on a per-helper instance and peer-to-peer
connections. The code that landed in qemu master for v5.0 is relying
on a single instance and DBus bus.
Instead of trying to adapt the existing dbus-vmstate code, let's
remove it and resubmit. That should make reviewing easier.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The functionality is now provided by glib's GKeyFile.
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
We want a way to easily run a private GMainContext in a
thread, with correct synchronization between startup
and shutdown of the thread.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The virbpf module wraps syscalls to BPF. However, if the kernel
headers used at the compile time don't have support for BPF the
module offers stubs which return a negative one to signal error
to the caller. But there is a slight discrepancy between real
functions and these stubs. While the former set errno and return
-1 the latter report an error (without setting the errno) and
return -1. This is not optimal because the caller might see stale
errno and overwrite the error message with a less accurate one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Start virtiofsd for each <filesystem> device using it.
Pre-create the socket for communication with QEMU and pass it
to virtiofsd.
Note that virtiofsd needs to run as root.
https://bugzilla.redhat.com/show_bug.cgi?id=1694166
Introduced by QEMU commit a43efa34c7d7b628cbf1ec0fe60043e5c91043ea
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Tested-by: Andrea Bolognani <abologna@redhat.com>
Just like virhostdev, this depends on domain_conf and
it's shared by multiple hypervisor drivers.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This module depends on domain_conf and is used directly by various
hypervisor drivers.
Move it to src/hypervisor.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
After the introduction of virDomainDriverMergeBlkioDevice() in a
previous patch, it is now clear that lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters() uses the same loop to set cgroup
blkio parameter of a domain.
Avoid the repetition by adding a new helper called
virDomainCgroupSetupDomainBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
lxcDomainMergeBlkioDevice() and qemuDomainMergeBlkioDevice()
are the same functions. This duplicated code can't be put in
the existing domain_cgroup.c since it's not cgroup related.
This patch introduces a new src/hypervisor/domain_driver.c to
host this more generic code that can be shared between virt
drivers. This new file is then used to create a new helper
called virDomainDeivceMergeBlkioDevice() to eliminate the code
repetition mentioned above. Callers in LXC and QEMU files
were updated.
This change is a preliminary step for more code reduction of
cgroup related code inside lxcDomainSetBlkioParameters() and
qemuDomainSetBlkioParameters().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
It is no longer require since switching to the GLib based
event loop impl.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
* chown: use is conditionally compiled
* configmake: functionality imported to Makefile.am
* getaddrinfo: we have no portability problems
with Windows impl
* getpass: simplified impl is imported
* mgetgroups: getgrouplist is used directly
* net_if: header includes are conditionalized
* netdb: header includes are conditionalized
* passfd: simplified impl is imported
* posix-shell: functionality was unused & removed
* sigaction: usage is conditionalized
* sigpipe: usage is conditionalized
* stat-time: struct stat is used directly
* strchrnul: usage is eliminated
* strtok_r: usage is not a portability problem
* sys_stat: usage is conditionalized
* uname: rewritten to use native Win32 function to
get host arch
* waitpid: usage is conditionalized
* wcwidth: rewritten using g_unichar APIs
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The function virSecretGetSecretString calls into secret driver and is
used from other hypervisors drivers and as such makes more sense in
util.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The phyp driver was added in 2009 and does not appear to have had any
real feature change since 2011. There's virtually no evidence online
of users actually using it. IMO it's time to kill it.
This was discussed a bit in April 2016:
https://www.redhat.com/archives/libvir-list/2016-April/msg01060.html
Final discussion is here:
https://www.redhat.com/archives/libvir-list/2019-December/msg01162.html
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
This module will be used by virHostdevManager and it's inspired
by virPCIDevice module. They are very similar except instead of
what makes a NVMe device: PCI address AND namespace ID. This
means that a NVMe device can appear in a domain multiple times,
each time with a different namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Introduce virsh commands for performing backup jobs.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Accept XML describing a generic block job, and output it again as
needed. This may still need a few tweaks to match the documented XML
and RNG schema.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Now that we use GRegex everywhere, there is no need for this module.
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
This function loads the BPF prog with prepared map into kernel and
attaches it into guest cgroup. It can be also used to replace existing
program in the cgroup if we need to resize BPF map to store more rules
for devices. The old program will be closed and removed from kernel.
There are two possible ways how to create BPF program:
- One way is to write simple C-like code which can by compiled into
BPF object file which can be loaded into kernel using elfutils.
- The second way is to define macros which look like assembler
instructions and can be used directly to create BPF program that
can be directly loaded into kernel.
Since the program is not too complex we can use the second option.
If there is no program, all devices are allowed, if there is some
program it is executed and based on the exit status the access is
denied for 0 and allowed for 1.
Our program will follow these rules:
- first it will try to look for the specific key using major and
minor to see if there is any rule for that specific device
- if there is no specific rule it will try to look for any rule that
matches only major of the device
- if there is no match with major it will try the same but with
minor of the device
- as the last attempt it will try to look for rule for all devices
and if there is no match it will return 0 to deny that access
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to implement devices controller with cgroup v2 we need to
add support for BPF programs, cgroup v2 doesn't have devices controller.
This introduces required helpers wrapping linux syscalls.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When we want to know the boot timestamp of the host, we can call
virHostGetBootTime(). Under the hood, it uses getutxid() which is
defined by POSIX and properly check for in configure. However,
musl took a path where it declares the function but instead of
providing any useful implementation it returns NULL meaning "no
record found". If that's the case, use our second best option -
/proc/uptime and a bit of maths.
https://bugzilla.redhat.com/show_bug.cgi?id=1760885
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
There was no need to handle files for translation from build directory
but that will change with following patches where we will stop
generating source files into source directory.
In order to have them included for translation we have to prefix each
file with SRCDIR or BUILDDIR.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Historically we have relied on autopoint/gettextize to install a
standard po/Makefile.in.in. There is very limited scope for customizing
this and it also causes a bunch of extra stuff to be pulled into
configure.ac which potentially clashes with gnulib. Writing make rules
for po file management is no more difficult than any other rules libvirt
has, so stop using autopoint/gettextize.
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In the end, this will allow us to have most of the logic around
migration parameters and capabilities done in one place.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
xend was deprecated in Xen 4.2 and removed from the Xen sources
before the Xen 4.5 release. The last Xen release to contain xend
was Xen 4.4, which was retired upstream in March 2017.
Remove xend support from libvirt since it is unrealistic to use
modern libvirt with ancient Xen.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
introduce helper to parse RTM_GETNEIGH query message and
store it in struct virArpTable.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Having a daemon/ directory makes little sense from a code structure
point of view, as 90% of the code that is built into libvirtd already
lives in the src/ directory. The virtlockd and virlogd daemons also live
entirely in src/{locking,logging} directories. This moves the source
code for libvirtd into src/remote/, alongside the client code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The storage driver backends are serving the public storage pools API,
while the storage file backends are serving the internal QEMU driver and
/ or libvirt utility code.
To prep for moving this storage file backend framework into the utility
code, split out the backend definitions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The admin server functionality is a generic concept that should be wired
up into all libvirt daemons, but is currently integrated with the
libvirtd code. Move it all into the src/admin directory to prepare for
broader reuse.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This will make the current functions obsolete and it will provide more
information to the virresctrl module so that it can be used later.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The new virFileCache will nicely handle the caching logic for any data
that we would like to cache. For each type of data we will just need
to implement few handlers that will take care of creating, validating,
loading and saving the cached data.
The cached data must be an instance of virObject.
Currently we cache QEMU capabilities which will start using
virFileCache.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
The code will be used by snapshots and domain save/restore code to store
additional data for a saved running domain. It is analogous to migration
cookies, but simple and one way only.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Now that we have a bit more control, let's convert our object into
a lockable object and let that magic handle the create and lock/unlock.
This commit also introduces virInterfaceObjEndAPI in order to handle the
lock unlock and object unref in one call for consumers returning a NULL
obj upon return. This removes the need for virInterfaceObj{Lock|Unlock}
external API's.
Signed-off-by: John Ferlan <jferlan@redhat.com>
We will need some convenient helper functions for managing sysfs-entries
for fibre channel-backed devices. Let's implement them and make them
available in the private API.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Move all the virNetworkObj related API/data structures into their own
modules virnetworkobj.{c,h} from the network_conf.{c,h}
Purely code motion at this point plus adjustments to cleanly build
Move virshLookupDomainBy, virshCommandOptDomainBy and
virshCommandOptDomainBy to the helper file. Additionally turn the
virshCommandOptDomainBy macro into a function.
Beside creation, disposal, getter, and setter methods the module exports
methods to work with lists of mediated devices.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
