Add a virtlockd-admin-sock can serves the admin protocol for the virtlockd
daemon and define a virtlockd:///{system,session} URI scheme for
connecting to it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The admin server functionality is a generic concept that should be wired
up into all libvirt daemons, but is currently integrated with the
libvirtd code. Move it all into the src/admin directory to prepare for
broader reuse.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The use of [[:blank:]] was intended to cover tabs as well, but
it couldn't possibly work in its current form, so the regex was
tweaked in d09429abe8.
With the original reason for using [[:blank:]] now gone, we can
replace its usage with plain spaces. A comment about the purpose
of the check is added as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
We have a check for backslash alignment that checks for two blanks preceding a
backslash. However there can be alignment done using a tabulator and in some
cases one might be enough. There are none currently, but I found out that was
the case before. at some point. so let's check for \t preceding the final
backslash as well.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Right-aligning backslashes when defining macros or using complex
commands in Makefiles looks cute, but as soon as any changes is
required to the code you end up with either distractingly broken
alignment or unnecessarily big diffs where most of the changes
are just pushing all backslashes a few characters to one side.
Generated using
$ git grep -El '[[:blank:]][[:blank:]]\\$' | \
grep -E '*\.([chx]|am|mk)$$' | \
while read f; do \
sed -Ei 's/[[:blank:]]*[[:blank:]]\\$/ \\/g' "$f"; \
done
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Seeing a log message saying 'flags=93' is ambiguous & confusing unless
you happen to know that libvirt always prints flags as hex. Change our
debug messages so that they always add a '0x' prefix when printing flags,
and '0' prefix when printing mode. A few other misc places gain a '0x'
prefix in error messages too.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The commandhelper binary is a helper for commandtest that
validates what file handles were inherited. For this to
work reliably we must not have any libraries that leak
file descriptors into commandhelper. Unfortunately some
versions of gnutls will intentionally open file handles
at library load time via a constructor function.
We previously hacked around this in
commit 4cbc15d037
Author: Martin Kletzander <mkletzan@redhat.com>
Date: Fri May 2 09:55:52 2014 +0200
tests: don't fail with newer gnutls
gnutls-3.3.0 and newer leaves 2 FDs open in order to be backwards
compatible when it comes to chrooted binaries [1]. Linking
commandhelper with gnutls then leaves these two FDs open and
commandtest fails thanks to that. This patch does not link
commandhelper with libvirt.la, but rather only the utilities making
the test pass.
Based on suggestion from Daniel [2].
[1] http://lists.gnutls.org/pipermail/gnutls-help/2014-April/003429.html
[2] https://www.redhat.com/archives/libvir-list/2014-April/msg01119.html
That fix relied on fact that while libvirt.so linked with
gnutls, libvirt_util.la did not link to it. With the
introduction of the util/vircrypto.c file that assumption
is no longer valid. We must not link to libvirt_util.la
at all - only gnulib and libc can (hopefully) be relied
on not to open random file descriptors in constructors.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Despite being a generated file, HACKING has been tracked in
the git repository along with actual source files. As far as
I'm aware, it's the only generated file for which that happens.
Times and times again, people[1] have committed changes to
the source file without refreshing the generated copy at the
same time.
The rationale for tracking the generated file is to help out
people who just cloned the git repository looking to contribue;
however, README-hacking already contains enough information to
get perspective contributors to a place where they can simply
look at docs/hacking.html instead.
[1] Mostly me, to be honest
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
This mock (which is actually not mock at all, see later) can redirect
all accesses to a path into another path. There is no need to
create mocks for particular directories, you just create a directory
with all the data a redirect the test there.
In the future, this should also be able to register callbacks for
calls/paths, e.g. when the test is going to write into anything under
"/sys/devices", call function fce(); Then in the open() call we would
add information about the fd into some structure and in write() we
would call fce() with parameters like @path to write to, @data to
be written and pointer to optional return value, so that fce() itself
could stop the call from happening or change its behaviour. But
that's an idea for a latter day.
This is not a mock because it will not be preloaded, but compiled in
the test itself. See future patches for usage.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Per xen-xl conversions from and to native under host-passthrough
mode we take care for Xen (nestedhvm = mode) applied and inherited
settings generating or processing correct feature policy:
[On Intel (VT-x) architectures]
<feature policy='disable' name='vmx'/>
or
[On AMD (AMD-V) architectures]
<feature policy='disable' name='svm'/>
It will then generate (or parse) for nestedhvm=1 in/from xl format.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com>
The goal is twofold: firstly, we want to extend the script so
that it can deal with more than a single git submodule, and
secondly we'd like to reduce the amount of duplicated code.
Moreover, since we're making heavy changes to the code anyway,
we might as well make sure it follows a somewhat consistent
coding style too.
To reduce code duplication, we introduce a new --dry-run
option, which can be used by third parties to figure out
whether calling autogen.sh is necessary or not: this allows
us to get rid of the reimplementation of part of the logic
in cfg.mk and guarantee they'll never get out of sync.
Other changes include: making dirty submodules checking and
cleaning entirely independent of other operations; removing
the use of 'set -e' and handling errors explicitly instead;
better parsing of command line arguments.
CLang's optimizer is more aggressive at inlining functions than
gcc and so will often inline functions that our tests want to
mock-override. This causes the test to fail in bizarre ways.
We don't want to disable inlining completely, but we must at
least prevent inlining of mocked functions. Fortunately there
is a 'noinline' attribute that lets us control this per function.
A syntax check rule is added that parses tests/*mock.c to extract
the list of functions that are mocked (restricted to names starting
with 'vir' prefix). It then checks that src/*.h header file to
ensure it has a 'ATTRIBUTE_NOINLINE' annotation. This should prevent
use from bit-rotting in future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
virDomainFree has it's quirks (does not like NULL pointers, resets
libvirt errors). Replace it by a virsh helper which will allow us to
centrally fix issues with it.
The syntax-check rule will prohibit new uses of virDomainFree.
Fixing make syntax-check broken by commit 4da534c0b9.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Matching the beginning of a path in syntax check does not work because
each path is enriched with a prefix of the source tree.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There is no reason for it not to be in the utils, all global symbols
under that file already have prefix vir* and there is no reason for it
to be part of DRIVER_SOURCES because that is just a leftover from
older days (pre-driver modules era, I believe).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Now that we have some qemuSecurity wrappers over
virSecurityManager APIs, lets make sure everybody sticks with
them. We have them for a reason and calling virSecurityManager
API directly instead of wrapper may lead into accidentally
labelling a file on the host instead of namespace.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The utils code should stay separated from other code (except for very
well justified cases). Unfortunately commit 272769becc
made it trivial to break the separation (and not get slapped by the
syntax-check rule) by adding -I src/conf to the CFLAGS for utils.
Remove this shortcut and except the two offenders from the syntax check
so that the codebase can be kept separated.
Problem with VIR_FREE() is that we are not linking
libvirt-utils.so to our mock libs therefore there will be an
unresolved symbol. Fortunately, nsstest that eventually links
with the nssmock links also with libvirt-utils.so and thus the
symbol is resolved after all. However, if one wants to run the
test binary under valgrind it is impossible to do so. Because of
the unresolved symbol.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The front page contains a bunch of content that is either
outdated (eg links to libvirt qpid) or not particularly
useful (links to vendor hypervisor sites).
This rewrites it to be more directly useful to visitors,
providing a updated intro to libvirt project, direct
links to key pieces of website content (new contributors
guide, security process, bug reporting, XML formats), and
feed showing recent 5 blog posts on the virt tools planet.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This reverts commit 1f29f3da06.
Assuming <dt> is always used to document symbols is way too
broad, requiring far too many exemptions to be marked to
avoid syntax check rules.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The original libvirt logo was built using what appears to be
either Overpass font, or one stylistically very similar (the
slanted top of letters like 'l', 't', etc). The newly recreated
libvirt logo will use Overpass. Use this font for the website
text too, to provide a consistent style.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The library.xen file contains a braindump of thoughts dating
from the very first days of libvirt, when it was briefly
called libxen. This is not useful and potentially misleading
or confusing for people.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
This initially started as a fix of some debug printing in
virCgroupDetect. However it turned out that other places suffer
from the similar problem. While dealing with pids, esp. in cases
where we cannot use pid_t for ABI stability reasons, we often
chose an unsigned integer type. This makes no sense as pid_t is
signed.
Also, new syntax-check rule is introduced so we won't repeat this
mistake.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some of the examples make use of asprintf and strtol functions (to keep
things simple) which are prohibited to use within our code (enforced by
syntax-check). Therefore besides adding some examples, this patch also updates
cfg.mk to exclude examples directory from asprintf and strtol rules, as well as
updates .gitignore to exclude all the new admin binaries created in the
'examples' dir.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
This script can already operate on a list of files.
Add a --check parameter to check if multiple files are wrapped
correctly with a single invocation of the script.
This checks forbids using "can not" and checks the placement
of some texinfo tags.
Drop it since we do not use texinfo and the check takes almost
twice as much as the rest of the checks.
The prohibit_nonreentrant syntax-check rule spawns a new shell
for every non-reentrant function we know, to make it easier
to mention the function name in the error message, with the _r
appended.
Since the line with the offending function is already printed
and some of the functions on our list do not have a _r counterpart,
compile them into one big regex and use a more generic error message
to save time.
Move all APIs with a virHostCPU name prefix out into new
util/virhostcpu.h & util/virhostcpu.c files
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Fix the regex for excluding files for this syntax-rule. The rule "include/"
will not work, because we are matching the whole line like this
"^(...|include/|...)$ so we need to use "include/libvirt/libvirt.+". The second
issue is that we are using only one '$' but there should be two of those at the
end. The last small adjustment is to escape dots '.' so it match only dot.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
There is a lot to explain, but I try to make it as short as
possible. I'd start by pasting some parts of sys/stat.h:
extern int stat (const char *__restrict __file,
struct stat *__restrict __buf) __THROW __nonnull ((1, 2));
extern int __REDIRECT_NTH (stat, (const char *__restrict __file,
struct stat *__restrict __buf), stat64)
__nonnull ((1, 2));
__extern_inline int
__NTH (stat (const char *__path, struct stat *__statbuf))
{
return __xstat (_STAT_VER, __path, __statbuf);
}
Only one of these is effective at once, due to some usage of
the mess we are dealing with in here. So, basically, while
compiling or linking stat() in our code can be transformed into
some other func. Or a dragon.
Now, if you read stat(2) manpage, esp. "C library/kernel
differences" section, you'll learn that glibc uses some tricks
for older applications to work. I haven't gotten around actual
code that does this, but based on my observations, if 'stat'
symbol is found, glibc assumes it's dealing with ancient
application. Unfortunately, it can be just ours stat coming from
our mock. Therefore, calling stat() from a test will end up in
our mock. But since glibc is not exposing the symbol anymore, our
call of real_stat() will SIGSEGV immediately as the pointer to
function is NULL. Therefore, we should expose only those symbols
we know glibc has.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The intent is that this library is going to be called every time
to check if we are not touching anything outside srcdir or
builddir.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 61b070cf20 cleaned up a number of cases where the <dt>
element was used to document symbols, but the symbol itself was
not inside a <code> element.
To make sure we don't end up having to clean up again a few
months from now, introduce a syntax-check rule that can spot
such mistakes.
All existing exceptions are marked as such, with either file
or line granularity depending on the case.
$ echo -n 'log_level=1' > ~/.config/libvirt/libvirtd.conf
$ libvirtd --timeout=10
2014-10-10 10:30:56.394+0000: 6626: info : libvirt version: 1.1.3.6, package: 1.fc20 (Fedora Project, 2014-09-08-17:50:42, buildvm-05.phx2.fedoraproject.org)
2014-10-10 10:30:56.394+0000: 6626: error : main:1261 : Can't load config file: configuration file syntax error: /home/rjones/.config/libvirt/libvirtd.conf:1: expecting a value: /home/rjones/.config/libvirt/libvirtd.conf
Rather than try to fix this in the depths of the parser, just catch
the case when a config file doesn't end in a newline, and manually
append a newline to the content before parsing
https://bugzilla.redhat.com/show_bug.cgi?id=1151409
To prevent the error messages in cfg.mk from triggering the very
same rules they're supposed to explain, we split the message in
the middle of a symbol name, ending up with stuff like
'I am a me'ssage
Instead of relying on these quotation tricks, simply exclude
cfg.mk from the relevant checks.
Being consistent is nice, especially when it comes to defining our
regular expression, where using single quotes instead of double
quotes allows us to leave out a few backslashes.
Changing this required altering a few error messages.
The only remaining use of double quotes is one where they are
actually required for the check to work.
While we have a wiki page describing the feature [1] since the
feature is distributed in our .tar.gz we ought to document it. So
I went ahead, copied the wiki page and reformatted so it fits our
docs coding style.
1: http://wiki.libvirt.org/page/NSS_module
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
After 9c17d665fd the tap device for ethernet network type is
automatically precreated before spawning qemu. Problem is, the
qemuxml2argvtest wasn't updated and thus is failing. Because of
all the APIs that new code is calling, I had to mock a lot. Also,
since the tap FDs are labeled separately from the rest of the
devices/files I had to enable NOP security driver for the test
too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
As mock libraries are not to be linked against libvirt, the
sc_prohibit_close syntax-check rule does not apply.
This fixes a syntax-check failure introduced by commit a03cbfe0fb.
There might be cases, like with typed params, where triggering this check isn't
desirable. But including the whole module in the exception regex is not always
to right way of doing things. By adding an option to manually disable this check
on a specific occurrence, the module itself will still be checked against the
rule.
As it turned out, we need to share some enums and declarations between
libvirt.h and libvirt-admin.h, but since our policy forbids direct includes of
libvirt*.h, there has to be some header exempt from this rule. This patch moves
the relevant part of code from libvirt.h.in to libvirt-common.h.in. Moreover,
since there is no need to have libvirt.h generated anymore, introduce a new
header libvirt.h which was previosly ignored from git and make the common
header ignored and generated instead.
Currently the QEMU stdout/stderr streams are written directly to
a regular file (eg /var/log/libvirt/qemu/$GUEST.log). While those
can be rotated by logrotate (using copytruncate option) this is
not very efficient. It also leaves open a window of opportunity
for a compromised/broken QEMU to DOS the host filesystem by
writing lots of text to stdout/stderr.
This makes it possible to connect the stdout/stderr file handles
to a pipe that is provided by virtlogd. The virtlogd daemon will
read from this pipe and write data to the log file, performing
file rotation whenever a pre-determined size limit is reached.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Copy the virtlockd codebase across to form the initial virlogd
code. Simple search & replace of s/lock/log/ and gut the remote
protocol & dispatcher. This gives us a daemon that starts up
and listens for connections, but does nothing with them.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Back in
commit bd6c46fa0c
Author: Juerg Haefliger <juerg.haefliger@hp.com>
Date: Mon Jan 31 06:42:57 2011 -0500
tests: handle backspace-newline pairs in test input files
all the test argv files were line wrapped so that the args
were less than 80 characters.
The way the line wrapping was done turns out to be quite
undesirable, because it often leaves multiple parameters
on the same line. If we later need to add or remove
individual parameters, then it leaves us having to redo
line wrapping.
This commit changes the line wrapping so that every
single "-param value" is one its own new line. If the
"value" is still too long, then we break on ',' or ':'
or ' ' as needed.
This means that when we come to add / remove parameters
from the test files line, the patch diffs will only
ever show a single line added/removed which will greatly
simplify review work.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We have macros for both positive and negative string matching.
Therefore there is no need to use !STREQ or !STRNEQ. At the same
time as we are dropping this, new syntax-check rule is
introduced to make sure we won't introduce it again.
Signed-off-by: Ishmanpreet Kaur Khera <khera.ishman@gmail.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
For this to pe properly separated from other protocols used by the
server, there is second server added which allows access to the whole
virNetDaemon to its clients.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Initial scratch of the admin library. It has its own virAdmConnectPtr
that inherits from virAbstractConnectPtr and thus trivially supports
error reporting.
There's pkg-config file added and spec-file adjusted as well.
Since the library should be "minimalistic" and not depend on any other
library, the list of files is especially crafted for it. Most of them
could've been put to it's own sub-libraries that would be LIBADD'd to
libvirt_util, libvirt_net_rpc and libvirt_setuid_rpc_client to minimize
the number of object files being built, but that's a refactoring that
isn't the orginal aim of this commit.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
In order not to bring in any link dependencies, bridge driver doesn't
use the usual stubs as other conditionally-built code does. However,
having the function as a macro imposes a problem with possibly unused
variables if just defined as "0". This was worked around by using
(dom=dom, iface=iface, 0) which should act like a 0 if used in a
condition. However, gcc still bugs about that, so I came up with
another way how to fix that.
Using static inline functions in the header won't collide with anything,
it fixes the bug and does one thing that the macro didn't do. It checks
whenther passed variables are pointers of compatible type. It has only
one downside, and that is that we need to either a) define it with
ATTRIBUTE_UNUSED, which needs an exception in cfg.mk or b) do something
like ignore_value(variable); in the function body. I went with the
first variant.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
We want all threads to be set as workers or to have a job assigned to
them, which can easily be achieved in virThreadCreate wrapper to
pthread_create. Let's make sure we always use the wrapper.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
So far it's just a structure which happens to have 'Obj' in its
name, but otherwise it not related to virObject at all. No
reference counting, not virObjectLock(), nothing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Well, one day this will be self-locking object, but not today.
But lets prepare the code for that! Moreover,
virNetworkObjListFree() is no longer needed, so turn it into
virNetworkObjListDispose().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Some code paths have special logic depending on the page size
reported by sysconf, which in turn affects the test results.
We must mock this so tests always have a consistent page size.
Per-cpu stats are only shown for present CPUs in the cgroups,
but we were only parsing the largest CPU number from
/sys/devices/system/cpu/present and looking for stats even for
non-present CPUs.
This resulted in:
internal error: cpuacct parse error
Introduce a Xen xl parser
This parser allows for users to convert the new xl disk format and
spice graphics config to libvirt xml format and vice versa. Regarding
the spice graphics config, the code is pretty much straight forward.
For the disk {formating, parsing}, this parser takes care of the new
xl format which include positional parameters and key/value parameters.
In xl format disk config a <diskspec> consists of parameters separated by
commas. If the parameters do not contain an '=' they are automatically
assigned to certain options following the order below
target, format, vdev, access
The above are the only mandatory parameters in the <diskspec> but there
are many more disk config options. These options can be specified as
key=value pairs. This takes care of the rest of the options such as
devtype, backend, backendtype, script, direct-io-safe,
The positional paramters can also be specified in key/value form
for example
/dev/vg/guest-volume,,hda
/dev/vg/guest-volume,raw,hda,rw
format=raw, vdev=hda, access=rw, target=/dev/vg/guest-volume
are interpleted to one config.
In xm format, the above diskspec would be written as
phy:/dev/vg/guest-volume,hda,w
The disk parser is based on the same parser used successfully by
the Xen project for several years now. Ian Jackson authored the
scanner, which is used by this commit with mimimal changes. Only
the PREFIX option is changed, to produce function and file names
more consistent with libvirt's convention.
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com>
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Since virDomainSnapshotFree will call virObjectUnref anyway, let's just use
that directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virInterfaceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNWFilterFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virSecretFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStreamFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStoragePoolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virStorageVolFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNodeDeviceFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virNetworkFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
Since virDomainFree will call virObjectUnref anyway, let's just use that
directly so as to avoid the possibility that we inadvertently clear out
a pending error message when using the public API.
virReportSystemError is reserved for reporting system errors, calling it
with VIR_ERR_* error codes produces error messages that do not make any
sense, such as
internal error: guest failed to start: Kernel doesn't support user
namespace: Link has been severed
We should prohibit wrong usage with a syntax-check rule.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
With this change, any patch declared in libvirt.spec with Patch[0-9]* is
automatically applied in %prep. Unlike with the standard %patch[0-9]*,
patches are applied with "git am" to avoid some unexpected results.
However, as a result of this, all patches must be in the right format
for "git am" to be able to apply them; they should ideally be generated
from git using "git format-patch".
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
I noticed this while working on qemuDomainGetBlockInfo. Assigning
a bool value to an int variable compiles fine, but raises red flags
on the maintenance front as it becomes too easy to assign -1 or 2
or any other non-bool value to the same variable.
* cfg.mk (sc_prohibit_int_assign_bool): New rule.
* src/conf/snapshot_conf.c (virDomainSnapshotRedefinePrep): Fix
offenders.
* src/qemu/qemu_driver.c (qemuDomainGetBlockInfo)
(qemuDomainSnapshotCreateXML): Likewise.
* src/test/test_driver.c (testDomainSnapshotAlignDisks):
Likewise.
* src/util/vircgroup.c (virCgroupSupportsCpuBW): Likewise.
* src/util/virpci.c (virPCIDeviceBindToStub): Likewise.
* src/util/virutil.c (virIsCapableVport): Likewise.
* tools/virsh-domain-monitor.c (cmdDomMemStat): Likewise.
* tools/virsh-domain.c (cmdBlockResize, cmdScreenshot)
(cmdInjectNMI, cmdSendKey, cmdSendProcessSignal)
(cmdDetachInterface): Likewise.
Signed-off-by: Eric Blake <eblake@redhat.com>
Now that all offenders have been cleaned, turn on a syntax-check
rule to prevent future offenders.
* cfg.mk (sc_prohibit_static_zero_init): New rule.
* src/qemu/qemu_driver.c (qemuDomainBlockJobImpl): Avoid false
positive.
Signed-off-by: Eric Blake <eblake@redhat.com>
The cfg.mk rule for checking preprocessor indentation was
mistakenly missing the libvirt.h.in file due to bad file
extension matching rule. Fix that and the resolve the
incorrect indentation that is identified.
Create a new libvirt-domain.h file to hold the public
API definitions for the virDomain type. This header
file is not self-contained, so applications will not directly
include it. They will continue to #include <libvirt/libvirt.h>
Spawning the pkcheck program every time a permission check is
required is hugely expensive on CPU. The pkcheck program is just
a dumb wrapper for the DBus API, so rewrite the code to use the
DBus API directly. This also simplifies error handling a bit.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
