Commit Graph

35 Commits

Author SHA1 Message Date
Michal Privoznik
29682196d8 Drop UML driver
The driver is unmaintained, untested and severely broken for
quite some time now. Since nobody even reported any issue with it
let us drop it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-12-17 17:52:46 +01:00
Daniel P. Berrange
b1c81567c7 docs: switch to using HTML5 doctype declaration
The HTML5 doctype is simply

  <!DOCTYPE html>

no DTD is present because HTML5 is no longer defined as an
extension of SGML.

XSL has no way to natively output a doctype without a public
or system identifier, so we have to use an <xsl:text> hack
instead.

See also

  https://dev.w3.org/html5/html-author/#doctype-declaration

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-08-02 17:00:11 +01:00
Daniel P. Berrange
4e42ff6b7e docs: switch to using 'id' attribute instead of 'name' for links
The 'name' attribute on <a...> elements is deprecated in favour
of the 'id' attribute which is allowed on any element. HTML5
drops 'name' support entirely.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2017-08-02 17:00:11 +01:00
Philipp Hahn
d7dcea6f60 doc: fix writing of QEMU
QEMU should be written all upper or all lower case.
2017-03-08 17:33:07 +01:00
Michal Privoznik
2780c1a866 formatnwfilter.html.in: Kill useless spaces in <pre/>
The <pre/> section is rendered as-is on the page. That is, if all
the lines are prefixed with 4 spaces the rendered page will also
have them. Problem is if we put a box around such <pre/> because
the content might not fix into it.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2016-11-14 11:03:34 +01:00
Laine Stump
898d62313e docs: remove *other* reference to igmp for IPv6
This finishes the job started by commit 81f3839f8 - removing the
erroneous reference to nonexistent "igmp-ipv6" protocol.
2016-04-22 12:45:59 -04:00
Laine Stump
81f3839f87 docs: remove reference to non-existent "igmp-ipv6" protocol
IGMP is used on IPv4 networks tp setup multicast group memberships. On
IPv6, this job is done by Multicast Listener Discovery (MLD), which
uses ICMPv6 packets rather than its own IP protocol number like IGMP.

The nwfilter documentation lists "igmp-ipv6" as one of the possible
protocols, but this is ignored (and stripped from the xml). This patch
removes that erroneous reference.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1038888
2016-04-21 16:32:12 -04:00
Stefan Berger
3a3b3691d1 nwfilter: Add support for icmpv6 filtering
Make use of the ebtables functionality to be able to filter certain
parameters of icmpv6 packets. Extend the XML parser for icmpv6 types,
type ranges, codes, and code ranges. Extend the nwfilter documentation,
schema, and test cases.

Being able to filter icmpv6 types and codes helps extending the DHCP
snooper for IPv6 and filtering at least some parameters of IPv6's NDP
(Neighbor Discovery Protocol) packets. However, the filtering will not
be as good as the filtering of ARP packets since we cannot
check on IP addresses in the payload of the NDP packets.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2015-01-07 11:41:49 -05:00
Jianwei Hu
0856757279 docs: nwfilter: add missing dscp attribute
Added attribute dscp to below supported protocols table in nwfilter docs.
IPV4 (ip)
TCP/UDP/SCTP (tcp/udp/sctp)
ICMP (icmp)
IGMP,ESP,AH,UDPLITE,'ALL' (igmp,esp,ah,udplite,all)
TCP/UDP/SCTP over IPV6 (tcp-ipv6,udp-ipv6,sctp-ipv6)
ICMPV6 (icmpv6)
IGMP,ESP,AH,UDPLITE,'ALL' over IPv6 (igmp-ipv6,esp-ipv6,ah-ipv6,udplite-ipv6,all-ipv6)

Here is a simple example:
[root@localhost ~]# virsh nwfilter-dumpxml myself
<filter name='myself' chain='root'>
  <uuid>7192ef51-cd50-4f14-ad7b-fa5c69ea19e3</uuid>
  <rule action='accept' direction='in' priority='500'>
    <ip dscp='1'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <tcp dscp='1'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <tcp-ipv6 dscp='2'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <icmp dscp='55'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <icmpv6 dscp='55'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <udp dscp='3'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <udp-ipv6 dscp='4'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <udplite dscp='5'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <udplite-ipv6 dscp='6'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <esp dscp='7'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <esp-ipv6 dscp='8'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <ah dscp='9'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <ah-ipv6 dscp='10'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <sctp dscp='11'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <sctp-ipv6 dscp='55'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <igmp dscp='55'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <all-ipv6 dscp='55'/>
  </rule>
  <rule action='accept' direction='in' priority='500'>
    <all dscp='55'/>
  </rule>
</filter>

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-08-19 11:54:35 +02:00
Jianwei Hu
55f34fe3bd Fix vlanid attribute name in nwfilter docs
'vlanid' is the attribute name in our XML,
'vlan-id' is the ebtables attribute:

[root@localhost ~]# virsh nwfilter-dumpxml myself
<filter name='myself' chain='root'>
  <uuid>7192ef51-cd50-4f14-ad7b-fa5c69ea19e3</uuid>
  <rule action='accept' direction='in' priority='500'>
    <vlan dstmacaddr='00:11:22:33:44:55' vlanid='44'/>
  </rule>
</filter>

[root@localhost ~]# ebtables -t nat -L
Bridge table: nat

...
-p 802_1Q -d 0:11:22:33:44:55 --vlan-id 44 -j ACCEPT

https://bugzilla.redhat.com/show_bug.cgi?id=1126721

Signed-off-by: Ján Tomko <jtomko@redhat.com>
2014-08-05 09:59:17 +02:00
Stefan Berger
a81756f1ff nwfilter: Add ARP src/dst IP mask for ebtables ARP
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=862887

Add a netmask for the source and destination IP address for the
ebtables --arp-ip-src and --arp-ip-dst options. Extend the XML
parser with support for XML attributes for these netmasks similar
to already supported netmasks. Extend the documentation.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2014-03-13 18:30:09 -04:00
Chen Hanxiao
18037b5f1c docs: fix a typo in formatnwfilter.html.in
s/insallations/installations/

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-11-15 06:00:49 -07:00
Chen Hanxiao
1502029100 docs: fix a typo in formatnwfilter
s/fragement/fragment

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-11-06 16:45:18 +01:00
Chen Hanxiao
d70840f68d docs: fix typos in formatnwfilter
s/initated/initiated

Signed-off-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com>
2013-10-30 08:55:06 +01:00
Daniel P. Berrange
f2f9742d4d Fix multiple formatting problems in HTML docs
The rule generating the HTML docs passing the --html flag
to xsltproc. This makes it use the legacy HTML parser, which
either ignores or tries to fix all sorts of broken XML tags.
There's no reason why we should be writing broken XML in
the first place, so removing --html and adding the XHTML
doctype to all files forces us to create good XML.

This adds the XHTML doc type and fixes many, many XML tag
problems it exposes.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-05-03 15:56:15 +01:00
Yuri Chornoivan
66d811293a Fix some typos in messages, docs and comments. 2012-08-22 15:34:07 -06:00
Stefan Berger
cec281fcaa nwfilter: add DHCP snooping
This patch adds DHCP snooping support to libvirt. The learning method for
IP addresses is specified by setting the "CTRL_IP_LEARNING" variable to one of
"any" [default] (existing IP learning code), "none" (static only addresses)
or "dhcp" (DHCP snooping).

Active leases are saved in a lease file and reloaded on restart or HUP.

The following interface XML activates and uses the DHCP snooping:

    <interface type='bridge'>
      <source bridge='virbr0'/>
      <filterref filter='clean-traffic'>
        <parameter name='CTRL_IP_LEARNING' value='dhcp'/>
      </filterref>
    </interface>

All filters containing the variable 'IP' are automatically adjusted when
the VM receives an IP address via DHCP. However, multiple IP addresses per
interface are silently ignored in this patch, thus only supporting one IP
address per interface. Multiple IP address support is added in a later
patch in this series.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2012-06-01 19:32:06 -04:00
Stefan Berger
a3f3ab4c9c nwfilter: Add support for ipset
This patch adds support for the recent ipset iptables extension
to libvirt's nwfilter subsystem. Ipset allows to maintain 'sets'
of IP addresses, ports and other packet parameters and allows for
faster lookup (in the order of O(1) vs. O(n)) and rule evaluation
to achieve higher throughput than what can be achieved with
individual iptables rules.

On the command line iptables supports ipset using

iptables ... -m set --match-set <ipset name> <flags> -j ...

where 'ipset name' is the name of a previously created ipset and
flags is a comma-separated list of up to 6 flags. Flags use 'src' and 'dst'
for selecting IP addresses, ports etc. from the source or
destination part of a packet. So a concrete example may look like this:

iptables -A INPUT -m set --match-set test src,src -j ACCEPT

Since ipset management is quite complex, the idea was to leave ipset 
management outside of libvirt but still allow users to reference an ipset.
The user would have to make sure the ipset is available once the VM is
started so that the iptables rule(s) referencing the ipset can be created.

Using XML to describe an ipset in an nwfilter rule would then look as
follows:

  <rule action='accept' direction='in'>
    <all ipset='test' ipsetflags='src,src'/>
  </rule>

The two parameters on the command line are also the two distinct XML attributes
'ipset' and 'ipsetflags'.

FYI: Here is the man page for ipset:

https://ipset.netfilter.org/ipset.man.html

Regards,
    Stefan
2012-05-21 06:26:34 -04:00
Stefan Berger
a20cc3cc4f Add documentation new ways to access members of variables
This patch adds documentation about the new 'ways' that users can
access the contents of variables in filters:

- access via index: $TEST[2]
- access via iterators $TEST[@1]
2012-01-11 06:42:37 -05:00
Stefan Berger
d64208888d Add documentation for STP filtering support
Add documentation for the STP filtering support. Describe the XML attributes
that are supported.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-22 15:12:03 -05:00
Stefan Berger
83ac18937e Add documentation for VLAN filtering support
Add documentation for the VLAN filtering support. Describe the XML attributes
that are supported.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2011-11-19 07:26:56 -05:00
Stefan Berger
1d8a00cd22 Documentation about chains' priorities, lists of elements etc.
This patch adds several aspects of documentation about the network filtering
system:

- chains, chains' priorities and chains' default priorities
- talks about lists of elements, i.e., a variable assigned multiple values
  (part of already ACK-ed series)
- already mentions the vlan, stp and mac chains added later on
  (https://www.redhat.com/archives/libvir-list/2011-October/msg01238.html)
- mentions limitations of vlan filtering (when sent by VM) on Linux systems
2011-11-18 11:58:18 -05:00
David L Stevens
a61e9ff60d support continue/return targets in nwfilter
This patch adds support for "continue" and "return" actions
in filter rules.

Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
2011-10-20 17:37:38 -06:00
Stefan Berger
fcb0e8c227 nwfilter: enable filtering of gratuitous ARP packets
This patch enables filtering of gratuitous ARP packets using the following XML:

<rule action='accept' direction='in' priority='425'>
<arp gratuitous='true'/>
</rule>
2011-05-23 19:41:18 -04:00
Stefan Berger
973b681bdf nwfilter: no support for direct type of interface
Ebtables filtering doesn't work on macvtap device. Remove support for direct type of interface.
2011-04-19 16:23:59 -04:00
Stefan Berger
6ab24feb44 nwfilters: support for TCP flags evaluation
This patch adds support for the evaluation of TCP flags in nwfilters.

It adds documentation to the web page and extends the tests as well.
Also, the nwfilter schema is extended.

The following are some example for rules using the tcp flags:

<rule action='accept' direction='in'>
    <tcp state='NONE' flags='SYN/ALL' dsptportstart='80'/>
</rule>
<rule action='drop' direction='in'>
    <tcp state='NONE' flags='SYN/ALL'/>
</rule>
2011-04-07 20:13:38 -04:00
Eric Blake
b5ec89d955 docs: correct invalid xml
* docs/internals.html.in: Fix xml errors.
* docs/formatstorageencryption.html.in: Likewise.
* docs/drvesx.html.in: Likewise.
* docs/archnetwork.html.in: Likewise.
* docs/logging.html.in: Likewise.
* docs/drvvmware.html.in: Likewise.
* docs/api.html.in: Likewise.
* docs/formatnwfilter.html.in: Likewise.
* docs/formatdomain.html.in: Likewise.
* docs/windows.html.in: Likewise.
2011-04-01 16:03:11 -06:00
Daniel Veillard
6c8f24751e The next release is 0.9.0 not 0.8.9
Fix this which went into documentation
2011-03-30 21:30:54 +08:00
Stefan Berger
912d170f87 nwfilter: enable rejection of packets
This patch adds the possibility to not just drop packets, but to also have them rejected where iptables at least sends an ICMP msg back to the originator. On ebtables this again maps into dropping packets since rejecting is not supported.

I am adding 'since 0.8.9' to the docs assuming this will be the next version of libvirt.
2011-02-18 20:13:40 -05:00
Stefan Berger
5e760a91ab nwfilter: Add 2nd example to the html docs
This patch adds another example to the nwfilter html page and provides 2 solutions for how to write a filter meeting the given requirements using newly added features.
2010-10-07 06:50:26 -04:00
Stefan Berger
3d112d3642 nwfilter: Extend docs with info about the state attribute
I am adding a row with information about the newly supported state
attribute to each of the tables describing supported attributes of protocols.
2010-10-07 06:45:46 -04:00
Stefan Berger
4bb2b16d07 nwfilter: Extend docs with information about comment attr.
I am adding a row with information about the newly supported comment
attribute to each of the tables describing supported attributes of protocols.
2010-09-30 16:01:51 -04:00
Stefan Berger
7057f39c51 nwfilter: extensions of docs with
As requested, here a couple of paragraphs about the recently added statematch attribute and some advanced (and tricky) traffic filtering topics.
2010-06-18 13:44:17 -04:00
Eric Blake
6e6acb776b build: fix HTML errors in nwfilter docs
A build on Ubuntu reported:

|| Generating formatnwfilter.html.tmp
/dados/develop/libvirt/docs/formatnwfilter.html.in|390| HTML parser error : Unexpected end tag : p
||     </p>
||         ^
/dados/develop/libvirt/docs/formatnwfilter.html.in|705| HTML parser error : Unexpected end tag : code
||          <td>End of range of valid source ports</code></td>
||                                                       ^
/dados/develop/libvirt/docs/formatnwfilter.html.in|710| HTML parser error : Unexpected end tag : code
||          <td>Start of range of valid destination ports</code></td>
||                                                              ^

* docs/formatnwfilter.html.in: Fix invalid HTML constructs.
Reported by Eduardo Otubo.
2010-05-25 17:33:21 -06:00
Stefan Berger
f36eb6935d nwfilter: documentation
This patch adds documentation of the nwfilter subsystem of libvirt to
the existing (web) docs.
2010-05-25 07:09:31 -04:00