Extend the lxc-enter-namespace command so that it joins the
containers' cgroups before starting new namespaces. This
ensures that the commands run have the normal resource
limits applied
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Currently if a guest has listen address 0.0.0.0 or [::] and you run
"virsh domdisplay $domain" you always get "spice://localhost:$port".
We want to print better address if someone is connected from a different
computer using "virsh -c qemu+ssh://some.host/system". This patch fixes the
behavior of virsh to print in this case "spice://some.host:$port".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1332446
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=885380
Use vshCommandOptScaledInt instead of vshCommandOptULongLong so that
values with suffixes can be passed when bytes are being passed along.
Values for the iops parameters still need to be given in the absolute
form as they are not bytes but numbers.
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
cmdDetachInterface function checks for live config
flags and then passes the live/config domain xml
to virshDomainDetachInterface accordingly.
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
After failing to parse the perf event list, the code would return
failure without freeing the previously acquired object. Rearrange the
code to avoid the problem.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1329046
Since we didn't opt to use one single event for device lifecycle for a
VM we are missing one last event if the device removal failed. This
event will be emitted once we asked to eject the device but for some
reason it is not possible.
When using the --start option, the show_count should not be set to
max_id as the --start <cpu> means we dont need those many initial cpu
stats. Hence, show_count should be adjusted accordingly.
https://bugzilla.redhat.com/show_bug.cgi?id=1249441
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Now that we have @flags we can support changing perf events just
in active or inactive configuration regardless of the other.
Previously, calling virDomainSetPerfEvents set events in both
active and inactive configuration at once. Even though we allow
users to set perf events that are to be enabled once domain is
started up. The virDomainGetPerfEvents API was flawed too. It
returned just runtime info.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Everywhere else we use a comma separated list. There's no good
reason to make 'perf' command an exception. Currently, it accepts
string list separated by '|'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
I've noticed that these APIs are missing @flags argument. Even
though we don't have a use for them, it's our policy that every
new API must have @flags.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
VIR_DOMAIN_EVENT_SUSPENDED_POSTCOPY and VIR_DOMAIN_PAUSED_POSTCOPY are
used on the source host once migration enters post-copy mode (which
means the domain gets paused on the source. After the destination host
takes over the execution of the domain, its virtual CPUs are resumed and
the domain enters VIR_DOMAIN_RUNNING_POSTCOPY state and
VIR_DOMAIN_EVENT_RESUMED_POSTCOPY event is emitted.
In case migration fails during post-copy mode and none of the hosts have
complete state of the domain, both domains will remain paused with
VIR_DOMAIN_PAUSED_POSTCOPY_FAILED reason and an upper layer may decide
what to do.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Some hypervisors (namely qemu) can have a separate connecton for
non-shared disks migration of active domains. Currently we have
no means to control the port of such a connection. At the same
time we have options to control port of memory migration traffic
(thru migration uri) as well as interfaces that target server
is bound to for incoming migration (thru VIR_MIGRATE_PARAM_LISTEN_ADDRESS).
Let's add the option for setting disks port too.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The API docs state that the API queries pinning info for all vCPUs and
thus we should allocate the bitmap even for the inactive ones.
The API will currently return bitmap only for the active vCPUs but that
will change in the future.
The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job
(such as migration) finishes and it will contain statistics for the job
as one would get by calling virDomainGetJobStats. Thanks to this event
it is now possible to get statistics of a completed migration of a
transient domain on the source host.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Since we have the macro there's no need for us to unwind it by
hand and check for mutually exclusive flags ourselves.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Rather than setting flags to -1 if none were specified, move the logic
to use the old API to the place where we need to decide. It simplifies
the logic a bit.
Since the code is changing the source image path by modifying the
existing XML snippet the <backingStore> stays in place.
As <backingStore> is relevant to the <source> part of the image, the
update of that part makes the element invalid.
CD/floppy images usually don't have a backing chain and the element is
currently ignored though but it might start being used in the future so
let's start behaving correctly.
Drop the <backingStore> subtree once we want to update the XML.
Before this patch, you'd get:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<backingStore type="file" index="1">
<format type="qcow2"/>
<source file="/var/lib/libvirt/images/vm.1436949097"/>
<backingStore/>
</backingStore>
<target dev="hdc" bus="ide"/>
...
</disk>
After:
$ virsh change-media --eject --print-xml 10 hdc
<disk type="file" device="cdrom">
<driver name="qemu" type="qcow2"/>
<target dev="hdc" bus="ide"/>
...
</disk>
The macro would eat the first parameter. In some cases the format string
for vshPrint was eaten. In other cases the calls referenced variables
which did not exist in the given context. Avoid errors by doing compile
time checking.
After a block job hits 100%, we only need to apply a timeout waiting for
a block job event if exactly one of the BLOCK_JOB or BLOCK_JOB_2
callbacks were able to be registered.
If neither callback could be registered, there's clearly no need for a
timeout.
If both callbacks were registered, then we're guaranteed to eventually
get one of the events. The path being used by virsh must be exactly the
source path or target device in the domain's disk definition, and these
are the respective strings sent back in these two events.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
When waiting for a block job, the various statuses (COMPLETED, READY,
CANCELED, etc.) should all be treated consistently by having the loop be
exited with "break". Use "goto cleanup" for the error cases only, when
no block job status is available.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
There is no need to call virshPrintJobProgress() unless the block job's
cur or end cursors have changed since the last iteration.
Signed-off-by: Michael Chapman <mike@very.puzzling.org>
After commit 57177f1, the cpu-stats command format change to:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378732785511
vcpu_time is not user friendly. After this patch, it will
change back:
CPU0:
cpu_time 14401.507878990 seconds
vcpu_time 14378.732785511 seconds
https://bugzilla.redhat.com/show_bug.cgi?id=1301807
Signed-off-by: Luyao Huang <lhuang@redhat.com>
virDomainGetCPUStats doesn't support flags so there's no need to carry
the 'flags' variable around. Additionally since the API is poorly
designed I doubt that it will be extended.
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
It all works like this. The change-media command dumps domain
XML, finds the corresponding cdrom device we want to change media
in and returns it in the xmlNodePtr form. This way we don't have
to bother with keeping all the subelements or attributes that we
don't care about in the XML that is fed back to libvirt for the
update API.
Now, the problem is we try to be clever here and detect if disk
already has a source (indicated by <source/> subelement).
However, bare fact that the element is there does not mean disk
has source. Make our clever check better.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The VIR_DOMAIN_EVENT_ID_MIGRATION_ITERATION event will be triggered
whenever VIR_DOMAIN_JOB_MEMORY_ITERATION changes its value, i.e.,
whenever a new iteration over guest memory pages is started during
migration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr for the less common help string for each
command option. Note that only file options using "OT_DATA" and
"OFLAG_REQ" will be replace - others are left as is.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect current domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect running domain". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which for many options in virsh-domain.c
is simply "affect next boot". So, create a second macro within that
file in order to define the more common use as a revector to the
common macro with the common _helpstr.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. Note that not all
'{.name = "persistent",' entries are replaced, just those that have the
common .help string of "make live change persistent".
Non replaced instances are unique to the command.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Rather than continually cut-n-paste the strings into each command,
create a common macro to be used generically. The macro will take a
single argument _helpstr which will be used to pass the translatable
helpstr since not all domain options can take the same string.
The majority of the options take 'N_("domain name, id or uuid")', so
create a separate macro with a _FULL suffix while those that do not
take the same string will use the VIRSH_COMMON_OPT_DOMAIN macro.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Implement a --timestamp option for 'virsh qemu-monitor-event', similar
to the one for 'virsh event'.
When the option is used, the human-readable timestamp will be printed
before the message, and the timing information provided by QEMU will
not be displayed.
memory_dirty_rate corresponds to dirty-pages-rate in QEMU and
memory_iteration is what QEMU reports in dirty-sync-count.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1281710
Commit id '3c7590e0a' added the flag to the rbd backend, but provided
no means via virsh to use the flag. This patch adds a '--delete-snapshots'
option to both the "undefine" and "vol-delete" commands.
For "undefine", the flag is combined with the "--remove-all-storage" flag
in order to add the appropriate flag for the virStorageVolDelete call;
whereas, for the "vol-delete" command, just the flag is sufficient since
it's only operating on one volume.
Currently only supported for rbd backends.
Instead of the custom error:
error: iothreadpin: invalid cpulist.
use vshCommandOptStringReq and let it report a more specific error:
error: Failed to get option 'cpulist': Option argument is empty
Adding this feature will allow users to easily attach a hostdev network
interface using PCI passthrough.
The interface can be attached using --type=hostdev and PCI address or
as --source. This command also allows you to tell, whether the interface
should be managed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=997561
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
While parsing device addresses we should use correct base and don't
count on auto-detect. For example, PCI address uses hex numbers, but
each number starting with 0 will be auto-detected as octal number and
that's wrong. Another wrong use-case is for PCI address if for example
bus is 10, than it's incorrectly parsed as decimal number.
PCI and CCW addresses have all values as hex numbers, IDE and SCSI
addresses are in decimal numbers.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
The number of vCPUs for a guest must be between 1 and the
maximum value configured in the domain XML. This commit
introduces checks to make sure that passing count <= 0
results in an error.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1248277
Signed-off-by: Luyao Huang <lhuang@redhat.com>
The condition checking whether --format was specified was incorrect.
virsh crashed if the following format was used:
virsh dump VM dump --format '' --memory-only
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1272301
https://bugzilla.redhat.com/show_bug.cgi?id=1250331
Even after my rework of startupPolicy handling, one command
slipped my attention. The change-media command has a very unique
approach to constructing disk XML. However, it will not preserve
startupPolicy attribute.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although 0 length block jobs aren't entirely useful, the output of virsh
blockjob is empty due to the condition that suppresses the output for
migration jobs that did not start. Since the only place that actually
uses the condition that suppresses the output is in migration, let's
move the check there and thus add support for 0 of 0 equaling to 100%.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1196711
We have the same argument to many other commands that produce an
XML based on what user typed. But unfortunately attach-interface
was missing it. Maybe nobody had needed it yet. Well, I did
just now.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adds a new interface type using UDP sockets, this seems only applicable
to QEMU but have edited tree-wide to support the new interface type.
The interface type required the addition of a "localaddr" (local
address), this then maps into the following xml and qemu call.
<interface type='udp'>
<mac address='52:54:00:5c:67:56'/>
<source address='127.0.0.1' port='11112'>
<local address='127.0.0.1' port='22222'/>
</source>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</interface>
QEMU call:
-net socket,udp=127.0.0.1:11112,localaddr=127.0.0.1:22222
Notice the xml "local" entry becomes the "localaddr" for the qemu call.
reference:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg00629.html
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
When looking up a domain, we try to look up by ID, UUID and NAME
consequently while not really caring which of those lookups succeeds.
The problem is that if any of them fails, we dispatch the error from the
driver and that means setting both threadlocal and global error. Let's
say the last lookup (by NAME) succeeds and resets the threadlocal error as any
other API does, however leaving the global error unchanged. If the underlying
virsh command does not succeed afterwards, our cleanup routine in
vshCommandRun ensures that no libvirt error will be forgotten and that's
exactly where this global error comes in incorrectly.
# virsh domif-setlink 123 vnet1 up
error: interface (target: vnet1) not found
error: Domain not found: no domain with matching id 123
This patch also resets the global error which would otherwise cause some
minor confusion in reported error messages.
https://bugzilla.redhat.com/show_bug.cgi?id=1254152
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
In order to share as much virsh' logic as possible with upcomming
virt-admin client we need to split virsh logic into virsh specific and
client generic features.
Since majority of virsh methods should be generic enough to be used by
other clients, it's much easier to rename virsh specific data to virshX
than doing this vice versa. It moved generic virsh commands (including info
and opts structures) to generic module vsh.c.
Besides renaming methods and structures, this patch also involves introduction
of a client specific control structure being referenced as private data in the
original control structure, introduction of a new global vsh Initializer,
which currently doesn't do much, but there is a potential for added
functionality in the future.
Lastly it introduced client hooks which are especially necessary during
client connecting phase.
This patch implements new virsh command, domrename.
Using domrename, it will be possible to rename domain from the virsh shell by
calling virRenameDomain API.
It takes two arguments, current domain name and new domain name.
Example:
virsh # list --all
Id Name State
----------------------------------------------------
- bar shut off
virsh # domrename bar foo
Domain successfully renamed
virsh # list --all
Id Name State
----------------------------------------------------
- foo shut off
virsh #
Signed-off-by: Tomas Meszaros <exo@tty.sk>
In my previous commit d7f5c88961 I tried to introduce support
for inbound.floor. But the code change was incomplete. This is
the change needed to fully enable the feature.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit 6983d6d2 tried to improve parseRateStr but broke the build
instead for compilers that were not able to properly introspect the for
loop indexed by the enum resulting into the following error:
virsh-domain.c: In function 'parseRateStr':
virsh-domain.c:916:13: error: 'field_name' may be used uninitialized in this function [-Werror=maybe-uninitialized]
vshError(ctl, _("malformed %s field"), field_name);
^
virsh-domain.c:915:13: error: 'tmp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (virStrToLong_ullp(token, NULL, 10, tmp) < 0) {
^
Rather than trying to fix the code, refactor the function again by
reusing virStringSplit.
We have a function parseRateStr() that parses --inbound and
--outbound arguments to both attach-interface and domiftune.
Now that we have all virTypedParams macros needed for QoS,
lets parse even floor attribute. The extended format for the
arguments looks like this then:
--inbound average[,peak[,burst[,floor]]]
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The function is used to parse a tuple delimited by commas into
virNetDevBandwidth structure. So far only three out of fore
fields are supported: average, peak and burst. The single missing
field is floor. Well, the parsing works, but I think we can do
better. Especially when we will need to parse floor too in very
close future.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1250287
When run domfsinfo in quiet mode, we cannot get any
useful information (just get \n), this is because
we didn't use vshPrint to print useful information.
Signed-off-by: Luyao Huang <lhuang@redhat.com>
Reuse the vshBlockJobWait infrastructure to refactor cmdBlockCommit to
use the common code. This additionally fixes a bug when working with
new qemus, where when doing an active commit with --pivot the pivoting
would fail, since qemu reaches 100% completion but the job doesn't
switch to synchronized phase right away.
Introduce helper function that will provide logic for waiting for block
job completion so the 3 open coded places can be unified and improved.
This patch introduces the whole logic and uses it to fix
cmdBlockJobPull. The vshBlockJobWait function provides common logic for
block job waiting that should be robust enough to work across all
previous versions of libvirt. Since virsh allows passing user-provided
strings as paths of block devices we can't reliably use block job events
for detection of block job states so the function contains a great deal
of fallback logic.
Use the VSH_EXCLUSIVE_OPTIONS to exclude combinations of --pivot and
--keep-overlay and refactor the enforcing of the --wait option and other
flags that imply --wait.
Use the VSH_EXCLUSIVE_OPTIONS_VAR to interlock incompatible options.
Since a variable named 'abort' would conflict with older compilers use
VSH_EXCLUSIVE_OPTIONS for the --abort option.
There's this condition:
flags & VIR_DOMAIN_AFFECT_CURRENT && virDomainIsActive(dom)
which can never be true since VIR_DOMAIN_AFFECT_CURRENT has hardcoded
value of zero. Therefore virDomainIsActive() is a dead code. However,
the condition could make sense if it is rewritten as the following:
!(flags & VIR_DOMAIN_AFFECT_CONFIG) && virDomainIsActive(dom)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Commit id '81dd81e' caused a regression when attempting to print a
specific vcpuid that is out of the range of the maximum vcpus for
the guest, such as:
$ virsh vcpupin $dom 1000
VCPU: CPU Affinity
----------------------------------
$
Rather than just recover the old message, let's adjust the message based
on what would be displayed for a similar failure in the set path, such as:
$ virsh vcpupin $dom 1000
error: vcpu 1000 is out of range of persistent cpu count 2
$ virsh vcpupin $dom 1000 --live
error: vcpu 1000 is out of range of live cpu count 2
$
Signed-off-by: Luyao Huang <lhuang@redhat.com>
This patch provides support for a new watchdog action "inject-nmi" which
allows to define an inject of a non-maskable interrupt into a guest.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Daniel Hansel <daniel.hansel@linux.vnet.ibm.com>
Reviewed-by: Stefan Zimmermann <stzi@linux.vnet.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com>
The SCSI Architecture Model defines a logical unit address
as 64-bits in length, so change the field accordingly so
that the entire value could be stored.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The address elements are all unsigned integers, so we should
use the appropriate print directive when printing it.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
The SCSI address element attributes bus, target, and unit are expected
to be positive values, so make sure no one provides a negative value since
the value is stored as an unsigned.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
When the block job would fail while watching it using the "--wait"
option for blockcopy, virsh would rather unhelpfully report:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 4096 --verbose --wait
Now in mirroring phase
Add a special case when the block job vanishes while waiting for it to
finish to improve the message:
$ virsh blockcopy vm hdc /tmp/raw.img --granularity 8192 --verbose --wait
error: Block Copy unexpectedly failed
Add `virsh migrate' option `--migrate-disks' that allows CLI user to
explicitly specify block devices to migrate.
Signed-off-by: Pavel Boldin <pboldin@mirantis.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
