qemuDomainGetBlockInfo would error out if qemu did not report
'wr_highest_offset'. This usually does not happen, but can happen
briefly during active layer block commit. There's no need to report the
error, we can simply report that the disk is fully alocated at that
point.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452045
The host address or the socket path have already been checked at the
begining of the function virStorageSourceParseNBDColonString(). So,
when the parameter is not a unix socket, there is no reason to check
the address again because if it does not exists, the logic will fail
in the first IF conditional.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
VIR_STRDUP returns -1 if the string copy was not successful. So, the
current comparison/logic is throwing an error when VIR_STRDUP() returns
1. Only when source is NULL, it is considering as a success which is
not right.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
In 48d9e6cdcc and friends we've allowed users to back guest
memory by a file inside the host. And in order to keep things
manageable the memory_backing_dir variable was introduced to
qemu.conf to specify the directory where the files are kept.
However, libvirt's policy is that directories are created on
domain startup if they don't exist. We've missed this one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
commit a8eba5036 added further checking of the guest shutdown cause, but
this enhancement is available since qemu 2.10, causing a crash because
of a NULL pointer dereference on older qemus.
Thread 1 "libvirtd" received signal SIGSEGV, Segmentation fault.
0x00007ffff72441af in virJSONValueObjectGet (object=0x0,
key=0x7fffd5ef11bf "guest")
at util/virjson.c:769
769 if (object->type != VIR_JSON_TYPE_OBJECT)
(gdb) bt
0 in virJSONValueObjectGet
1 in virJSONValueObjectGetBoolean
2 in qemuMonitorJSONHandleShutdown
3 in qemuMonitorJSONIOProcessEvent
4 in qemuMonitorJSONIOProcessLine
5 in qemuMonitorJSONIOProcess
6 in qemuMonitorIOProcess
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Callers expect the return value to be the total number of vcpus in the
host (including offline vcpus). The refactor in c67e04e25f
broke this assumption by using virHostCPUGetOnlineBitmap which only
creates a bitmap long enough to hold the last online vcpu.
Report the full number of host vcpus by returning value from
virHostCPUGetCount().
Signed-off-by: Nitesh Konkar <nitkon12@linux.vnet.ibm.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
When a number of SRIOV VFs (up to 128 on Intel XL710) is created:
for i in `seq 0 1`; do
echo 63 > /sys/class/net/<interface>/device/sriov_numvfs
done
libvirtd will then report "udev_monitor_receive_device returned NULL"
error because the netlink socket buffer is not big enough (using GDB on
libudev confirmed this with ENOBUFFS) and thus some udev events were
dropped. This results in some devices being missing in the nodedev-list
output. This patch overrides the system's rmem_max limit but for that,
we need to make sure we've got root privileges.
https://bugzilla.redhat.com/show_bug.cgi?id=1450960
Signed-off-by: ning.bo <ning.bo9@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The @cpus is allocated by virFileReadValueBitmap() but never
freed:
==21274== 40 (32 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 808 of 1,004
==21274== at 0x4C2E080: calloc (vg_replace_malloc.c:711)
==21274== by 0x54BA561: virAlloc (viralloc.c:144)
==21274== by 0x54BC604: virBitmapNewEmpty (virbitmap.c:126)
==21274== by 0x54BD059: virBitmapParseUnlimited (virbitmap.c:570)
==21274== by 0x54EECE9: virFileReadValueBitmap (virfile.c:4113)
==21274== by 0x5563132: virCapabilitiesInitCaches (capabilities.c:1548)
==21274== by 0x2BB86E59: virQEMUCapsInit (qemu_capabilities.c:1132)
==21274== by 0x2BBEC067: virQEMUDriverCreateCapabilities (qemu_conf.c:928)
==21274== by 0x2BC3DEAA: qemuStateInitialize (qemu_driver.c:845)
==21274== by 0x5625AAC: virStateInitialize (libvirt.c:770)
==21274== by 0x124519: daemonRunStateInit (libvirtd.c:881)
==21274== by 0x554C927: virThreadHelper (virthread.c:206)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mention CCW and fc_remote_port capablities in the news.xml file.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Similar to scsi_host and fc_host, there is a relation between a
scsi_target and its transport specific fc_remote_port. Let's expose this
relation and relevant information behind it.
An example for a virsh nodedev-dumpxml:
virsh # nodedev-dumpxml scsi_target0_0_0
<device>
<name>scsi_target0_0_0</name>
<path>/sys/devices/[...]/host0/rport-0:0-0/target0:0:0</path>
<parent>scsi_host0</parent>
<capability type='scsi_target'>
<target>target0:0:0</target>
<capability type='fc_remote_port'>
<rport>rport-0:0-0</rport>
<wwpn>0x9d73bc45f0e21a86</wwpn>
</capability>
</capability>
</device>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
We will need some convenient helper functions for managing sysfs-entries
for fibre channel-backed devices. Let's implement them and make them
available in the private API.
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Now that the node_device driver is aware of CCW devices, let's hook up
virsh so that we can filter them properly.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Make CCW devices available to the node_device driver. The devices are
already seen by udev so let's implement necessary code for detecting
them properly.
Topologically, CCW devices are similar to PCI devices, e.g.:
+- ccw_0_0_1a2b
|
+- scsi_host0
|
+- scsi_target0_0_0
|
+- scsi_0_0_0_0
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Unlock @obj in case of an error too.
Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Since the switch statement is already using the deref'd @cap variable
and the VIR_NODE_DEV_CAP_NET case uses it, the SCSI_HOST and PCI_DEV
cases may as well use it too.
Suggested-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
QEMU will likely report the details of it shutting down, particularly
whether the shutdown was initiated by the guest or host. We should
forward that information along, at least for shutdown events. Reset
has that as well, however that is not a lifecycle event and would add
extra constants that might not be used. It can be added later on.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1384007
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The number of records that virConnectGetAllDomainStats can return per
domain is currently limited to 4096. This is quite low -- for
example, a single guest with ~320 disks will hit this limit. This
increases the limit to make it much larger. Note that
VIR_NET_MESSAGE_MAX still protects the total message size in the case
where there are many domains and many disks per domain.
I tested this using a guest with 500 disks with no issues.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1440683
When increasing the buffer size up to VIR_NET_MESSAGE_MAX, we
currently quadruple it each time. This unfortunately means that we
cannot allow certain buffer sizes -- for example the current
VIR_NET_MESSAGE_MAX == 33554432 can never be "hit" since ‘newlen’
jumps from 16MB to 64MB.
Instead of quadrupling, double it each time.
Thanks: Daniel Berrange.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Commit 4337bc57be introduced code that would in certain error paths
unref the last reference of a pointer, but return it.
Clear the pointers before returning them.
@tmp is leaked after the second call to virVHBAGetConfig within
virVHBAIsVportCapable code block because it wasn't freed after making the
first call to the function.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
The @ipv6_host allocated in virAsprintf may be lost when virAsprintf
addrstr failed.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There is a VIR_FREE after a return statement. That code section is never
executed and for this reason the "tty" variable is not being freed. This
commit rearranges the logic.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
This commit fixes an acl missing variable. The virt-acl.m4 inside the
macro directory does not contain the variable 'with_acl'. So, it is
being set as an empty string "with_acl=''". This is causing a missing
option during the configuration, even if you have acl libs installed.
Signed-off-by: Julio Faracco <jcfaracco@gmail.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1374126
Due to how the processing for authentication using polkit works, the
virshConnect code must first "attempt" an virConnectOpenAuth and then
check for a "special" return error code VIR_ERR_AUTH_UNAVAILABLE in
order to attempt to "retry" the authentication after performing a creation
of a pkttyagent to handle the challenge/response for the client.
However, if pkttyagent creation is not possible for the authentication
being attempted (such as perhaps a "qemu+ssh://someuser@localhost/system"),
then the same failure pattern would be returned and another attempt to
create a pkttyagent would be done. This would continue "forever" until
someone forced quit (e.g. ctrl-c) from virsh as the 'authfail' was not
incremented when creating the pkttyagent.
So add a 'agentCreated' boolean to track if we've attempted to create the
agent at least once and force a failure if that creation returned the same
error pattern.
This resolves a possible never ending loop and will generate an error:
error: failed to connect to the hypervisor
error: authentication unavailable: no polkit agent available to authenticate action 'org.libvirt.unix.manage'
NB: If the authentication was for a sufficiently privileged client, such as
qemu+ssh://root@localhost/system, then the remoteDispatchAuthList "allows"
the authentication to use libvirt since @callerUid would be 0.
Disclose the content of the 'test-suite.log' file (if available) in
case of failures inside Travis-CI. This is needed to understand what
happened and to provide hints about the proper fix (if applicable).
Many vendor id's and product id's have leading zeros. We should show
them in the logs.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
Reviewed-by: Laine Stump <laine@laine.org>
The @meminfo allocated in qemuMonitorGetMemoryDeviceInfo() may be
lost when qemuDomainObjExitMonitor() failed.
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1420740
Testing found an inventive way to cause an error at shutdown by providing the
parent name for the fc host creation using the "same name" as the HBA. Since
the code thus assumed the parent host name provided was the parent HBA and
just extracted out the host number and sent that along to the vport_destroy
this avoided checks made for equality.
So just add the equality check to that path to resolve.
While most of the APIs are okay with 16M messages, the bulk stats API
can run into the limit in big configurations. Before we devise a new
plan for this, bump this limit slightly to accomodate some more configs.
If the first console is just a copy of the first serial device we
don't need to iterate over the same device twice in order to perform
actions like security labeling, cgroup configuring, etc.
Currently only security SELinux manager was aware of this fact.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Put domain access after acquiring job condition, otherwise
another job can change it meanwhile.
Signed-off-by: Konstantin Neumoin <kneumoin@virtuozzo.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We have to use waitDomainJob instead of waitJob, because of it
unlock the domain until job has finished, so domain will be available
for other clients.
Signed-off-by: Konstantin Neumoin <kneumoin@virtuozzo.com>
Setting the 'group_name' for a disk would falsely trigger a error path
as in commit 4b57f76502 we did not properly check the return value of
VIR_STRDUP.
Attempting to start a domain with USB hostdevs but no USB controllers
fails with the rather cryptic error
libxl: error: libxl_qmp.c:287:qmp_handle_error_response: received an
error message from QMP server: Bus 'xenusb-0.0' not found
This can be fixed by creating default USB controllers. When no USB
controllers are defined, create the number of 8 port controllers
necessary to accommodate the number of defined USB devices.
Note that USB controllers are already created as needed in the
domainAttachDevice code path. E.g. a USB controller will be created,
if necessary, when attaching a USB device with
'virsh attach-device dom usbdev.xml'.
This reverts commit 2841e675.
It turns out that adding the host_mtu field to the PCI capabilities in
the guest bumps the length of PCI capabilities beyond the 32 byte
boundary, so the virtio-net device gets 64 bytes of ioport space
instead of 32, which offsets the address of all the other following
devices. Migration doesn't work very well when the location and length
of PCI capabilities of devices is changed between source and
destination.
This means that we need to make sure that the absence/presence of
host_mtu on the qemu commandline always matches between source and
destination, which means that we need to make setting of host_mtu an
opt-in thing (it can't happen automatically when the bridge being used
has a non-default MTU, which is what commit 2841e675 implemented).
I do want to re-implement this feature with an <mtu auto='on'/>
setting, but probably won't backport that to any stable branches, so
I'm first reverting the original commit, and that revert can be pushed
to the few releases that have been made since the original (3.1.0 -
3.3.0)
Resolves: https://bugzilla.redhat.com/1449346
