We were forgetting to check errno for overflow.
* tools/virsh.c (get_integer_keycode, vshCommandOptInt)
(vshCommandOptUInt, vshCommandOptUL, vshCommandOptLongLong)
(vshCommandOptULongLong): Rewrite to be safer.
I'm tired of shell-scripting to wait for completion of a block pull,
when virsh can be taught to do the same. I couldn't quite reuse
vshWatchJob, as this is not a case of a long-running command where
a second thread must be used to probe job status (at least, not unless
I make virsh start doing blocking waits for an event to fire), but it
served as inspiration for my simpler single-threaded loop. There is
up to a half-second delay between sending SIGINT and the job being
aborted, but I didn't think it worth the complexity of a second thread
and use of poll() just to minimize that delay.
* tools/virsh.c (cmdBlockPull): Add new options to wait for
completion.
(blockJobImpl): Add argument.
(cmdBlockJob): Adjust caller.
* tools/virsh.pod (blockjob): Document new mode.
Block job cancellation can take a while. Now that upstream qemu 1.1
has asynchronous block cancellation, we want to expose that to the user.
Therefore, the following updates are made to the virDomainBlockJob API:
A new block job event type VIR_DOMAIN_BLOCK_JOB_CANCELED is managed by
libvirt. Regardless of the flags used with virDomainBlockJobAbort, this
event will be raised: 1. when using synchronous block_job_cancel (the
event will be synthesized by libvirt), and 2. whenever it is received
from qemu (via asynchronous block-job-cancel). Note that the event
may be detected by libvirt even before the virDomainBlockJobAbort
completes (always true when it is synthesized, but also possible if
cancellation was fast).
A new extension flag VIR_DOMAIN_BLOCK_JOB_ABORT_ASYNC is added to the
virDomainBlockJobAbort API. When enabled, this function will allow
(but not require) asynchronous operation (ie, it returns as soon as
possible, which might be before the job has actually been canceled).
When the API is used in this mode, it is the responsibility of the
caller to wait for a VIR_DOMAIN_BLOCK_JOB_CANCELED event or poll via
the virDomainGetBlockJobInfo API to check the cancellation status.
This patch also exposes the new flag through virsh, and makes virsh
slightly easier to use (--async implies --abort, and lack of any options
implies --info), although it leaves the qemu implementation for later
patches.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Cc: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
This patch cleans up variables used to store boolean command flags that
are inquired by vshCommandOptBool to use the bool data type instead of
an integer.
Additionally this patch cleans up flag variables that are inferred from
existing flags.
The documentation for the flag doesn't clearly state that the flag only
enhances the output and the user needs to specify other flags to list
inactive domains, that are enhanced by this flag.
Currently, we put no strains on escape sequence possibly leaving users
with console that cannot be terminated. However, not all ASCII
characters can be used as escape sequence. Only those falling in
@ - _ can be; implement and document this constraint.
The code is splattered with a mix of
sizeof foo
sizeof (foo)
sizeof(foo)
Standardize on sizeof(foo) and add a syntax check rule to
enforce it
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Leaks are introduced in commit 1cf0e3d and fe383bb.
Fixing memory leaks, in addition, the patch also fixes a potential missing
return value issue in 'if (from)' statement, without the fixing, although
the programming met a error, the subsequent codes will be executed
continually.
* tools/virsh.c (cmdSnapshotList): fix memory leaks and missing return value.
* How to reproduce?
% virsh snapshot-list <domain> --parent --roots
% virsh snapshot-list <domain> --parent --tree
% virsh snapshot-list <domain> --roots --tree
actual result:
error: --parent and --roots are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --parent and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
error: --roots and --tree are mutually exclusive
error: Failed to disconnect from the hypervisor, 1 leaked reference(s)
% virsh snapshot-create-as <domain> --name "hello"
% virsh snapshot-create-as <domain> --name "libvirt"
% virsh snapshot-list <domain> --roots --from "hello"
actual result:
error: --roots and --from are mutually exclusive
Name Creation Time State
------------------------------------------------------------
libvirt 2012-03-28 13:46:51 +0800 running
Signed-off-by: Alex Jia <ajia@redhat.com>
Commit d42a2ff forgot to touch up virsh documentation, and commit
4e9953a mis-spelled the option name.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Fix typo
and match recent change in flag meaning.
Found when attempting to build on Fedora 17 alpha with:
./autogen.sh --system --enable-compile-warnings=error
(this same build command works without problem on Fedora 16). All
other struct initializers for this struct have the extra field filled
in (almost always to 0), so the two errant ones were fixed by adding
in the extra 0 field.
Return statements with parameter enclosed in parentheses were modified
and parentheses were removed. The whole change was scripted, here is how:
List of files was obtained using this command:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$'
Found files were modified with this command:
sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Then checked for nonsense.
The whole command looks like this:
git grep -l -e '\<return\s*([^()]*\(([^()]*)[^()]*\)*)\s*;' | \
grep -e '\.[ch]$' -e '\.py$' | xargs sed -i -e \
's_^\(.*\<return\)\s*(\(\([^()]*([^()]*)[^()]*\)*\))\s*\(;.*$\)_\1 \2\4_' \
-e 's_^\(.*\<return\)\s*(\([^()]*\))\s*\(;.*$\)_\1 \2\3_'
Right now, it is appallingly easy to cause qemu disk snapshots
to alter a domain then fail; for example, by requesting a two-disk
snapshot where the second disk name resides on read-only storage.
In this failure scenario, libvirt reports failure, but modifies
the live domain XML in-place to record that the first disk snapshot
was taken; and places a difficult burden on the management app
to grab the XML and reparse it to see which disks, if any, were
altered by the partial snapshot.
This patch adds a new flag where implementations can request that
the hypervisor make snapshots atomically; either no changes to
XML occur, or all disks were altered as a group. If you request
the flag, you either get outright failure up front, or you take
advantage of hypervisor abilities to make an atomic snapshot. Of
course, drivers should prefer the atomic means even without the
flag explicitly requested.
There's no way to make snapshots 100% bulletproof - even if the
hypervisor does it perfectly atomic, we could run out of memory
during the followup tasks of updating our in-memory XML, and report
a failure. However, these sorts of catastrophic failures are rare
and unlikely, and it is still nicer to know that either all
snapshots happened or none of them, as that is an easier state to
recover from.
* include/libvirt/libvirt.h.in
(VIR_DOMAIN_SNAPSHOT_CREATE_ATOMIC): New flag.
* src/libvirt.c (virDomainSnapshotCreateXML): Document it.
* tools/virsh.c (cmdSnapshotCreate, cmdSnapshotCreateAs): Expose it.
* tools/virsh.pod (snapshot-create, snapshot-create-as): Document
it.
This introduces a new running reason VIR_DOMAIN_RUNNING_WAKEUP,
and new suspend event type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
While a wakeup event is emitted, the domain which entered into
VIR_DOMAIN_PMSUSPENDED will be transferred to "running"
with reason VIR_DOMAIN_RUNNING_WAKEUP, and a new domain lifecycle
event emitted with type VIR_DOMAIN_EVENT_STARTED_WAKEUP.
This introduces a new domain state pmsuspended to represent
the domain which has been suspended by guest power management,
e.g. (entered itno s3 state). Because a "running" state could
be confused in this case, one will see the guest is paused
actually while playing. And state "paused" is for the domain
which was paused by virDomainSuspend.
virsh.pod had several instances in which it referred to "the
documentation" which was a little puzzling to me since it is
documentation. Reading the document from end to end makes it clear
that it means a specific URI which was noted previously in the text,
but I had never noticed those URIs in several years of referring to
the man page. This patch adds those URIs to several additional places
in the text.
Currently if the URI passed to virConnectOpen* is NULL, then we
- Look for LIBVIRT_DEFAULT_URI env var
- Probe for drivers
This changes it so that
- Look for LIBVIRT_DEFAULT_URI env var
- Look for 'uri_default' in $HOME/.libvirt/libvirt.conf
- Probe for drivers
Thanks to cgroups, providing user vs. system time of the overall
guest is easy to add to our existing API.
* include/libvirt/libvirt.h.in (VIR_DOMAIN_CPU_STATS_USERTIME)
(VIR_DOMAIN_CPU_STATS_SYSTEMTIME): New constants.
* src/util/virtypedparam.h (virTypedParameterArrayValidate)
(virTypedParameterAssign): Enforce checking the result.
* src/qemu/qemu_driver.c (qemuDomainGetPercpuStats): Fix offender.
(qemuDomainGetTotalcpuStats): Implement new parameters.
* tools/virsh.c (cmdCPUStats): Tweak output accordingly.
Since VIR_DOMAIN_AFFECT_{LIVE,CONFIG,CURRENT} was created,
all new virsh commands use "--config" to represents the
persistent changing. This patch add "--config" option
for the old commands which still use "--persistent",
and "--persistent" is now alias of "--config".
tools/virsh.c: (use "--config", and "--persistent" is
alias of "--config" now).
cmdDomIfSetLink, cmdDomIfGetLink, cmdAttachDevice,
cmdDetachDevice, cmdUpdateDevice, cmdAttachInterface,
cmdDetachInterface, cmdAttachDisk, cmdDetachDisk
toos/virsh.pod: Update docs of the changed commands, and
add some missed docs for "--config" (detach-interface,
detach-disk, and detach-device).
The last vestige of the inaccurate 'kilobytes' when we meant 1024 is
now gone. And virsh is now useful for setting memory in units other
than KiB.
* tools/virsh.c (cmdSetmem, cmdSetmaxmem): Use new helper routine,
allow passing bogus arguments on to hypervisor to test driver
sanity checking, and fix leak on parse error.
(vshMemtuneGetSize): New helper.
(cmdMemtune): Use it.
* tools/virsh.pod (setmem, setmaxmem, memtune): Document this.
Now can now do:
virsh vol-resize $vol 10M
virsh blockresize $dom $vol 10M
to get both interfaces to resize to 10MiB. The remaining wart
is that vol-resize defaults to bytes, but blockresize defaults
to KiB, but we can't break existing scripts; oh well, it's no
worse than the same wart of the underlying virDomainBlockResize.
The API for virStorageVolResize states that capacity must always
be positive, and that the presence of shrink and delta flags is
what implies a negative change.
* tools/virsh.c (vshCommandOptScaledInt): New function.
(cmdVolResize): Don't pass negative size.
(cmdVolSize): Rename...
(vshVolSize): ...and use new helper routine.
(cmdBlockResize): Use new helper routine, and support new bytes
flag.
* tools/virsh.pod (NOTES): Document suffixes.
(blockresize, vol-create-as, vol-resize): Point to notes.
Just because our public API has a typo doesn't mean that virsh
has to keep the typo.
* tools/virsh.c (VSH_CMD_FLAG_ALIAS): New flag.
(nodedevCmds): Use it.
(cmdHelp): Omit alias commands.
(cmdNodeDeviceDettach): Rename...
(cmdNodeDeviceDetach): ...to this.
* tools/virsh.pod (nodedev-detach): Document it.
Command line interfaces should use dash, not underscore, as many
keyboard layouts allow that to be typed with fewer shift key presses.
Also, the US spelling of --tunneled gets more google hits than the
UK spelling of --tunnelled.
* tools/virsh.c (opts_migrate): Allow US variant.
(opts_blkdeviotune): Prefer - over _.
* tools/virsh.pod (blkdeviotune): Fix spelling.
In the past, we have created some virsh options with less-than-stellar
names. For back-compat reasons, those names must continue to parse,
but we don't want to document them in help output. This introduces
a new option type, an alias, which points to a canonical option name
later in the option list.
I'm actually quite impressed that our code has already been factored
to do all option parsing through common entry points, such that I
got this added in relatively few lines of code!
* tools/virsh.c (VSH_OT_ALIAS): New option type.
(opts_echo): Hook up an alias, for easy testing.
(vshCmddefOptParse, vshCmddefHelp, vshCmddefGetOption): Allow for
aliases.
* tools/virsh.pod (NOTES): Document promise of back-compat.
* tests/virshtest.c (mymain): Test new feature.
With this patch, it's possible to shut down guests in parallel. Parallel
startup was possible before, but this functionality was not documented
properly.
To enable parallel startup set the START_DELAY to 0.
Parallel shutdown has a configurable parameter PARALLEL_SHUTDOWN that
defines the number of machines being shut down in parallel. Enabling
this feature changes the semantics of SHUTDOWN_TIMEOUT parameter that is
applied as a cumulative timeout to shutdown all guests on a URI.
No thanks to 64-bit windows, with 64-bit pid_t, we have to avoid
constructs like 'int pid'. Our API in libvirt-qemu cannot be
changed without breaking ABI; but then again, libvirt-qemu can
only be used on systems that support UNIX sockets, which rules
out Windows (even if qemu could be compiled there) - so for all
points on the call chain that interact with this API decision,
we require a different variable name to make it clear that we
audited the use for safety.
Adding a syntax-check rule only solves half the battle; anywhere
that uses printf on a pid_t still needs to be converted, but that
will be a separate patch.
* cfg.mk (sc_correct_id_types): New syntax check.
* src/libvirt-qemu.c (virDomainQemuAttach): Document why we didn't
use pid_t for pid, and validate for overflow.
* include/libvirt/libvirt-qemu.h (virDomainQemuAttach): Tweak name
for syntax check.
* src/vmware/vmware_conf.c (vmwareExtractPid): Likewise.
* src/driver.h (virDrvDomainQemuAttach): Likewise.
* tools/virsh.c (cmdQemuAttach): Likewise.
* src/remote/qemu_protocol.x (qemu_domain_attach_args): Likewise.
* src/qemu_protocol-structs (qemu_domain_attach_args): Likewise.
* src/util/cgroup.c (virCgroupPidCode, virCgroupKillInternal):
Likewise.
* src/qemu/qemu_command.c(qemuParseProcFileStrings): Likewise.
(qemuParseCommandLinePid): Use pid_t for pid.
* daemon/libvirtd.c (daemonForkIntoBackground): Likewise.
* src/conf/domain_conf.h (_virDomainObj): Likewise.
* src/probes.d (rpc_socket_new): Likewise.
* src/qemu/qemu_command.h (qemuParseCommandLinePid): Likewise.
* src/qemu/qemu_driver.c (qemudGetProcessInfo, qemuDomainAttach):
Likewise.
* src/qemu/qemu_process.c (qemuProcessAttach): Likewise.
* src/qemu/qemu_process.h (qemuProcessAttach): Likewise.
* src/uml/uml_driver.c (umlGetProcessInfo): Likewise.
* src/util/virnetdev.h (virNetDevSetNamespace): Likewise.
* src/util/virnetdev.c (virNetDevSetNamespace): Likewise.
* tests/testutils.c (virtTestCaptureProgramOutput): Likewise.
* src/conf/storage_conf.h (_virStoragePerms): Use mode_t, uid_t,
and gid_t rather than int.
* src/security/security_dac.c (virSecurityDACSetOwnership): Likewise.
* src/conf/storage_conf.c (virStorageDefParsePerms): Avoid
compiler warning.
Now virsh can call virDomainBlockRebase.
* tools/virsh.c (cmdBlockPull): Add --base parameter.
(blockJobImpl): Use it to expose BlockRebase API.
* tools/virsh.pod (blockpull): Document it.
This patch adds a check to the libvirt-guests script to check for the
URI to be alive before attempting any calls. This avoids nasty error
messages and allows us to fail gracefully and continue on other URIs
configured in the script.
The libvirt-guests script tried to do a managed save of transient guest
that failed. This patch notifies which guests are transient (and not
being saved) and saves only the persistent ones.
This patch adds documentation to functions defined in the libvirt-guests
init script and changes use of virsh's new commands to make the script
easier.
The current scrub version doesn't support pfitzner7, pfitzner33 and schneier
patterns on RHEL, we should comment it in virsh man page.
* tools/virsh.pod: update wiping algorithms docs.
Signed-off-by: Alex Jia <ajia@redhat.com>
vshFindDisk is to find the disk node in xml doc with given source
path or target of disk device, and type (indicates disk type,
normal disk or changeable disk).
vshPrepareDiskXML is to make changes on the disk node (e.g. create
and insert the new <source> node for inserting media of CDROM drive).
They are marked as unused temporarily.
This patch adds support for the newly introduced
VIR_DOMAIN_CONSOLE_FORCE and VIR_DOMAIN_CONSOLE_SAFE flags. The console
command now has an optional parameter --force that specifies that the
user wants to forcibly interrupt an ongoing console session and create
a new one. Flag --safe requests that the console should be opened only
if the hypervisor driver supports safe console handling.
The behaviour to this point was that the daemon opened two streams to
the console, that competed for data from the pipe, and the result was
that both of the consoles ended up scrambled.
This patch doesn't modify operation of other commands dealing with
console connections (start, create) as those open connections to newly
started domains making it virtually impossible for another client to race
for the console and steal it.
* tools/console.c:
- add support for flag passthrough
* tools/console.h:
- modify function prototypes to match impl.
* tools/virsh.c:
- add flag --force for the console command
If attempting to run
ssh root@somehost virsh console someguest
You'll get an error
2012-02-15 13:11:47.683+0000: 4765: info : libvirt version: 0.9.10, package: 1.fc18 (Unknown, 2012-02-15-11:48:57, lettuce.camlab.fab.redhat.com)
2012-02-15 13:11:47.683+0000: 4765: error : vshRunConsole:320 : unable to get tty attributes: Invalid argument
Connected to domain f16x86_64
Escape character is ^]
There are several problems here
- The actual error message is bad for users
- We shouldn't rely on VIR_ERROR for this case
- The prompt makes it look like we still connected
because we didn't flush stdout.
* virsh.c: Flush stdout before starting console and check
for a valid tty
This patch adds new options to the "virsh list" command enabling
filtering of persistent and transient domains along with the option to
print only UUIDs or names of domains instead of printing the table.
Option --name prints domain names (one per line) instead of the default
table. Similarly --uuid prints domain's UUID. The option --table is
an alias for the default behavior.
Aditionally --persistent and/or --transient may be specified to filter
the output of domains.
