Commit Graph

277 Commits

Author SHA1 Message Date
Eric Blake
bbbdc14854 build: fix 'make rpm'
Since commit ddf3bd3, 'make rpm' failed with:

RPM build errors:
    File not found: /home/remote/eblake/rpmbuild/BUILDROOT/libvirt-0.9.6-1.fc14.eblake1318366440.x86_64/usr/share/systemtap/tapset/libvirtd.stp

* libvirt.spec.in (with_dtrace): Match installed .stp files.
2011-10-11 15:44:55 -06:00
Dan Horák
099dc93b7c disable xenlight for non-Xen platforms
when building libvirt in Fedora/s390x I've found that xenlight needs to
be explicitly disabled in the spec file. Configure properly sets the
library as non-existent, but the %files section still wants to package
the 3 /var/*/libvirt/libxl directories. See also
https://bugzilla.redhat.com/show_bug.cgi?id=745020
2011-10-11 14:24:18 -06:00
Eric Blake
5298551e07 init: raise default system aio limits
https://bugzilla.redhat.com/show_bug.cgi?id=740899 documents that
if qemu uses aio=native for its disks, then it consumes 128 aio
requests per disk.  On a host with multiple guests, this can quickly
run out of kernel aio requests with the default aio-max-nr of
65536.  Kernel developers have confirmed that there is no up-front
cost to raising this limit (a larger limit merely implies that more
aio requests can be issued in parallel, which in turn will result
in more kernel memory allocation, only if the system really does use
that many requests).  Since the system default limit prevents 256
disks, which is well within libvirt's current scalability, this
patch installs a file to raise the limit and document it in case a
system administrator has further cause to tune the limit.  The
install only works on platforms new enough to source /etc/sysctl.d/*
alongside /etc/sysctl.conf (F14 and RHEL 6).

* daemon/libvirtd.sysctl: New file.
* daemon/Makefile.am (EXTRA_DIST): Ship it.
(install-init, uninstall-init): Install it.
* libvirt.spec.in (%files): Include it in rpm.
2011-10-05 14:49:35 -06:00
Eric Blake
ba6cbb182b spec: F15 still uses cgconfig, RHEL lacks hyperv
Commit ecd8725c dropped attempts to probe the cgconfig service on
new enough Fedora where systemd took over that aspect of the system,
but mistakenly used F14 instead of F15 as the cutoff point.

https://bugzilla.redhat.com/show_bug.cgi?id=741358

Also, RHEL does not include HyperV support yet.

* libvirt.spec.in (with_cgconfig): Check cgconfig service in F15.
(%{?rhel}): Provide default for with_hyperv.
2011-09-27 09:03:26 -06:00
Daniel Veillard
508de7eedb Release of libvirt-0.9.6 2011-09-22 14:53:23 +08:00
Daniel Veillard
a362f1f7aa Release of libvirt-0.9.5
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: fetch updated translations from transifex and rebuilt
2011-09-20 14:17:47 +08:00
Daniel P. Berrange
19ff0ddfbb Update to require sanlock 1.8 for license compliance
Inexplicably the sanlock code all got placed under the GPLv2-only,
so libvirt's use of sanlock introduces a license incompatibility.
The sanlock developers have now rearranged the code such that there
is a 'sanlock_client.so' which is LGPLv2+ while their daemon remains
GPLv2-only. To use the new client library we need to call the new
sanlock_init and sanlock_align APIs instead of sanlock_direct_init
and sanlock_direct_align. These APIs calls are now routed via the
sanlock daemon, instead of doing direct I/O calls to disk.

For all this we require sanlock >= 1.8

* configure.ac: Check for sanlock_client.so instead of sanlock.so
  and fix various comments
* libvirt.spec.in: Mandate sanlock >= 1.8
* src/Makefile.am: Link to -lsanlock_client
* src/locking/lock_driver_sanlock.c: Use sanlock_init and
  sanlock_align
2011-09-20 11:18:54 +08:00
Eric Blake
ecd8725c1a spec: silence warnings when installing in F16
https://bugzilla.redhat.com/show_bug.cgi?id=738725 documents that
'yum install libvirt' in Fedora 16 is rather noisy.  This fixes
the problems.

* libvirt.spec.in (%post client): Silence chkconfig warning about
SysV services.
(%post) [with_cgconfig]: Drop for Fedora 15 and newer, where
systemd does this automatically.
2011-09-17 06:27:00 -06:00
Michal Privoznik
a73e92ba08 spec: Require augeas for sanlock
Even though we BuildRequire augeas in some cases, we need to require
it even after if we build with sanlock. virt-sanlock-cleanup use it.
2011-09-15 17:08:59 +02:00
Osier Yang
8918fc8edf qemu_api: Update libvirt spec file 2011-09-14 11:39:02 +08:00
Eric Blake
2a95a3e976 snapshot: update rng to support full domain in xml
This patch will probably cause merge conflicts to those trying
to do backports.  The end goal is simple - domaincommon.rng
should be the state of domain.rng pre-patch, with a few lines
tweaked in the header, while domain.rng post-patch is now just
a shell that includes domaincommon.rng and sets the <start>.

* docs/schemas/domain.rng: Move guts...
* docs/schemas/domaincommon.rng: ...to new file.
* docs/schemas/domainsnapshot.rng: Allow new xml.
* docs/schemas/Makefile.am (schema_DATA): Distribute new file.
* tests/domainsnapshotxml2xmlout/full_domain.xml: New test.
* libvirt.spec.in (%files client): Ship new file.  Sort lines.
* mingw32-libvirt.spec.in: Likewise.
2011-09-03 08:12:13 -06:00
Osier Yang
660cb2530f storage: Add mkfs and libblkid to build system 2011-09-02 21:16:50 +08:00
Matthias Bolte
f2e7064373 hyperv: Add configure check for OpenWSMAN 2011-08-26 17:52:54 +02:00
Daniel Veillard
14c2ca3db9 Release of libvirt-0.9.4
* configure.ac docs/news.html.in libvirt.spec.in: updates for new
  release
* po/*.po*: pulled translations from the transifex teams and regenerated
  localizations
2011-08-03 11:02:42 +08:00
Daniel P. Berrange
7df6945d7f Add libtasn1-devel as a BuildRequires for libvirt.spec
* libvirt.spec.in: Add libtasn1-devel
2011-07-26 11:21:11 +01:00
Michal Privoznik
90074ecfa7 bandwidth: Implement functions to enable and disable QoS
These function executes 'tc' with appropriate arguments to set
desired QoS setting on interface or bridge during its creation.
2011-07-25 13:49:55 +08:00
Daniel P. Berrange
c198d91667 Pre-create /var/lib/libvirt/sanlock directory
The sanlock plugin for libvirt expects the directory
/var/lib/libvirt/sanlock to exist. Create this and add
it to the RPM

* libvirt.spec.in: Add /var/lib/libvirt/sanlock
* src/Makefile.am: Create /var/lib/libvirt/sanlock
2011-07-22 15:52:44 +01:00
Laine Stump
a3d95b550b conf: put virtPortProfile struct / functions in a common location
virtPortProfiles are currently only used in the domain XML, but will
soon also be used in the network XML. To prepare for that change, this
patch moves the structure definition into util/network.h and the parse
and format functions into util/network.c (I decided that this was a
better choice than macvtap.h/c for something that needed to always be
available on all platforms).
2011-07-21 14:46:33 -04:00
Wen Congyang
f209333996 build: disable some drivers when building without libvirt daemon
We disable some drivers when building without libvirtd in configure,
but we do not do the same thing in libvirt.spec. It may break rpm
building without libvirtd.
2011-07-14 22:59:07 +08:00
Daniel Veillard
920ffe1b0a Fix rpm build with sanlock and without QEmu
The qemu-sanlock.conf file is not installed in this case
2011-07-11 15:57:01 +08:00
Laine Stump
0c97dc4159 xml: create an RNG file for common types and move some definitions there
domain.rng, network.rng, and interface.rng already use a few of the
same types (or in some cases *should* but don't), and an upcoming code
change will have them sharing even more. To prepare for that, this
patch takes those common data type definitions and moves them into
basictypes.rng.

This may break some rule about the need to RNG files to be autonomous
or something, but I saw that storageencryption.rng is used in this
way, so I figured it must not be completely against the law...
2011-07-05 12:33:21 -04:00
Daniel Veillard
7976d96dd7 Release of libvirt-0.9.3
* configure.ac docs/news.html.in libvirt.spec.in: update for the
  new release
* po/*.po*: updated and regenerated localizations
2011-07-04 15:54:36 +08:00
Eric Blake
d710531f95 build: sanlock-devel is not in F15 yet
* libvirt.spec.in (with_sanlock): Only default on in rawhide.
Reported by Gerhard Stenzel.
2011-06-28 11:25:04 -06:00
Daniel P. Berrange
97e4f21782 Support automatic creation of leases for disks in sanlock
The current sanlock plugin requires a central management
application to manually add <lease> elements to each guest,
to protect resources that are assigned to it (eg writable
disks). This makes the sanlock plugin useless for usage
in more ad hoc deployment environments where there is no
central authority to associate disks with leases.

This patch adds a mode where the sanlock plugin will
automatically create leases for each assigned read-write
disk, using a md5 checksum of the fully qualified disk
path. This can work pretty well if guests are using
stable disk paths for block devices eg /dev/disk/by-path/XXXX
symlinks, or if all hosts have NFS volumes mounted in
a consistent pattern.

The plugin will create one lockspace for managing disks
with filename /var/lib/libvirt/sanlock/__LIBVIRT__DISKS__.
For each VM disks, there will be another file to hold
a lease /var/lib/libvirt/sanlock/5903e5d25e087e60a20fe4566fab41fd
Each VM disk lease is usually 1 MB in size. The script
virt-sanlock-cleanup should be run periodically to remove
unused lease files from the lockspace directory.

To make use of this capability the admin will need to do
several tasks:

 - Mount an NFS volume (or other shared filesystem)
   on /var/lib/libvirt/sanlock
 - Configure 'host_id' in /etc/libvirt/qemu-sanlock.conf
   with a unique value for each host with the same NFS
   mount
 - Toggle the 'auto_disk_leases' parameter in qemu-sanlock.conf

Technically the first step can be skipped, in which case
sanlock will only protect against 2 vms on the same host
using the same disk (or the same VM being started twice
due to error by libvirt).

* src/locking/libvirt_sanlock.aug,
  src/locking/sanlock.conf,
  src/locking/test_libvirt_sanlock.aug: Add config params
  for configuring auto lease setup
* libvirt.spec.in: Add virt-sanlock-cleanup program, man
  page
* tools/virt-sanlock-cleanup.in: Script to purge unused
  disk resource lease files
2011-06-28 18:18:06 +01:00
Daniel P. Berrange
58eb4f2cbb Support loading a configuration file for sanlock plugin
Introduce a configuration file with a single parameter
'require_lease_for_disks', which is used to decide whether
it is allowed to start a guest which has read/write disks,
but without any leases.

* libvirt.spec.in: Add sanlock config file and augeas
  lens
* src/Makefile.am: Install sanlock config file and
  augeas lens
* src/locking/libvirt_sanlock.aug: Augeas master lens
* src/locking/test_libvirt_sanlock.aug: Augeas test file
* src/locking/sanlock.conf: Example sanlock config
* src/locking/lock_driver_sanlock.c: Wire up loading
  of configuration file
2011-06-28 18:07:06 +01:00
Ruben Kerkhof
ca43756800 Only include parthelper if built with storage_disk
Parthelper is only compiled if both --with-libvirtd
and --with-storage-disk are set.

Signed-off-by: Ruben Kerkhof <ruben@rubenkerkhof.com>
2011-06-27 08:50:40 -06:00
Eric Blake
1486099cca build: require newer netcf when it is available
When building rpms for newer Fedora or RHEL, take advantage of the
newer netcf packaging to guarantee interface snapshot support.

* libvirt.spec.in (BuildRequires): Bump minimum version on
platforms that support netcf 0.1.8.
2011-06-21 14:27:32 -06:00
Matthias Bolte
7e3205cd10 Move XenAPI driver to correct spec file section
The XenAPI driver works like the ESX and PHyp driver by using its
own HTTPS based remote protocol.
2011-06-20 10:23:55 +02:00
Matthias Bolte
7c7626aee0 Move VMware Workstation/Player driver to correct spec file section
The VMware driver works like the OpenVZ driver by using a commandline
tool for management. It dosen't use it's own remote protocol.
2011-06-09 20:28:18 +02:00
Daniel Veillard
2c5ded6e82 Release of libvirt-0.9.2
* configure.ac docs/news.html.in libvirt.spec.in: update for release
* po/*.po*: updated translations and regenerated
2011-06-06 11:46:37 +08:00
Daniel P. Berrange
9f135031ff Add a plugin for the 'sanlock' project
Sanlock is a project that implements a disk-paxos locking
algorithm. This is suitable for cluster deployments with
shared storage.

* src/Makefile.am: Add dlopen plugin for sanlock
* src/locking/lock_driver_sanlock.c: Sanlock driver
* configure.ac: Check for sanlock
* libvirt.spec.in: Add a libvirt-lock-sanlock RPM
2011-06-02 10:54:01 +01:00
Richard W.M. Jones
ee9ceb3295 libvirt.spec: /var/cache/libvirt should be 0711.
This allows qemu to create files in /var/cache/libvirt/qemu/, and
specifically is required to fix virDomainMemoryPeek.
2011-05-20 16:18:11 +01:00
Daniel Veillard
9b889aacef Release of libvirt-0.9.1
* configure.ac libvirt.spec.in docs/news.html.in: update and document
  the release
* po/*.po*: update localizations for german, polish, spanish, ukrainian
  and vietnamese coming from transifex, regenerate
2011-05-05 11:25:13 +08:00
Alan Pevec
16d6b0d80a Experimental libvirtd upstart job
To install it, disable libvirtd sysv initscript:
    chkconfig libvirtd off
    service libvirtd stop

and enable libvirtd upstart job:
    cp  /usr/share/doc/libvirt-*/libvirtd.upstart \
        /etc/init/libvirtd.conf
    initctl reload-configuration
    initctl start libvirtd

Test:
    initctl status libvirtd
libvirtd start/running, process 3929
    killall -9 libvirtd
    initctl status libvirtd
libvirtd start/running, process 4047

I looked into the possibility to use the upstart script from Ubuntu or
at least getting inspiration from it but that's not possible. "expect
daemon" is a nice thing but it only works if the process is defined with
exec stanza instead of script ... no script. Unfortunately, with exec
stanza environment variables can only be set within upstart script
(i.e., configuration in /etc/sysconfig/libvirtd can't work). Hence, we
need to use script stanza, source sysconfig, and execute libvirtd
without --daemon. For similar reasons we can't use limit stanza and need
to handle DAEMON_COREFILE_LIMIT in job's script.
2011-04-18 11:38:30 +02:00
Daniel P. Berrange
a7e80bde11 Fix typo in systemtap tapset directory name
The systemtap directory for tapsets is called

  /usr/share/systemtap/tapset

Not

 /usr/share/systemtap/tapsets

* daemon/Makefile.am,libvirt.spec.in: s/tapsets/tapset/
2011-04-05 17:44:12 +01:00
Daniel Veillard
d17e438ad3 Release of libvirt-0.9.0
* configure.ac docs/news.html.in libvirt.spec.in: update for the release
* po/*.po*: update polish translation and regenerate
2011-04-04 20:15:45 +08:00
Daniel Veillard
1613912dc2 Add libvirt_iohelper to spec file
The new iohelper binary was missing from the packaging spec
2011-03-30 08:54:23 +08:00
Daniel P. Berrange
4591df766d Remove the Open Nebula driver
The Open Nebula driver has been unmaintained since it was first
introduced. The only commits have been for tree-wide cleanups.
It also has a major design flaw, in that it only knows about guests
that it has created itself, which makes it of very limited use.

Discussions wrt evolution of the VMWare ESX driver, concluded that
it should limit itself to single-node ESX operation and not try to
manage the multi-node architecture of VirtualCenter. Open Nebula
is a cluster like Virtual Center, not a single node system, so
the same reasoning applies.

The DeltaCloud project includes an Open Nebula driver and is a much
better fit architecturally, since it is explicitly targetting the
distributed multihost cluster scenario.

Thus this patch deletes the libvirt Open Nebula driver with the
recommendation that people use DeltaCloud for managing it instead.

* configure.ac: Remove probe for xmlrpc & --with-one arg
* daemon/Makefile.am, daemon/libvirtd.c, src/Makefile.am: Remove
  ONE driver build
* src/opennebula/one_client.c, src/opennebula/one_client.h,
  src/opennebula/one_conf.c, src/opennebula/one_conf.h,
  src/opennebula/one_driver.c, src/opennebula/one_driver.c: Delete
  files
* autobuild.sh, libvirt.spec.in, mingw32-libvirt.spec.in: Remove
  build rules for Open Nebula
* docs/drivers.html.in, docs/sitemap.html.in: Remove reference
  to OpenNebula
* docs/drvone.html.in: Delete file
2011-03-28 14:09:11 +01:00
Eric Blake
206fc979b1 rpm: add missing dependencies
Among others, the missing radvd dependency showed up as:

error: Failed to start network ipv6net
error: Cannot find radvd - Possibly the package isn't installed: No such file
or directory

even when radvd was installed, because the RADVD preprocessor
symbol was missing at configure time.

* libvirt.spec.in (with_network): Add BuildRequires for radvd,
iptables, and ip6tables.
(BuildRequires): Add libxslt and augeas for docs and test.
(with_libvirtd): Add module-init-tools for modprobe.
(with_nwfilter): Add BuildRequires for ebtables.
(with_esx): Fix esx build on RHEL 5, thanks to curl-devel rename.
2011-03-23 11:16:49 -06:00
Eric Blake
7ee06f334b rpm: separate runtime and build requirements
* libvirt.spec.in (Requires): Reorganize requirements a bit; no
functional change.
2011-03-23 11:03:23 -06:00
Daniel P. Berrange
3c204d7d5b Disable libxl build in RPM on Fedora < 16
The xen RPM in Fedora isn't new enough to support libxl builds
yet. Disable it until Fedora 16

* libvirt.spec.in: Disable libxl on Fedora < 16
2011-03-22 14:25:51 +00:00
Jim Fehlig
2b84e445d5 Add libxenlight driver
Add a new xen driver based on libxenlight [1], which is the primary
toolstack starting with Xen 4.1.0.  The driver is stateful and runs
privileged only.

Like the existing xen-unified driver, the libxenlight driver is
accessed with xen:// URI.  Driver selection is based on the status
of xend.  If xend is running, the libxenlight driver will not load
and xen:// connections are handled by xen-unified.  If xend is not
running *and* the libxenlight driver is available, xen://
connections are deferred to the libxenlight driver.

V6:
 - Address several code style issues noted by Daniel Veillard
 - Make drive work with xen:/// URI
 - Hold domain object reference while domain is injected in
   libvirt event loop.  Race found and fixed by Markus Groß.

V5:
 - Ensure events are unregistered when domain private data
   is destroyed.  Discovered and fixed by Markus Groß.

V4:
 - Handle restart of libvirtd, reconnecting to previously
   started domains
 - Rebased to current master
 - Tested against Xen 4.1 RC7-pre (c/s 22961:c5d121fd35c0)

V3:
  - Reserve vnc port within driver when autoport=yes

V2:
  - Update to Xen 4.1 RC6-pre (c/s 22940:5a4710640f81)
  - Rebased to current master
  - Plug memory leaks found by Stefano Stabellini and valgrind
  - Handle SHUTDOWN_crash domain death event

[1] http://lists.xensource.com/archives/html/xen-devel/2009-11/msg00436.html
2011-03-18 08:57:48 -06:00
Eric Blake
80e6200f32 build: improve rpm generation for distro backports
When building for an older distro, it's convenient to just
tell rpmbuild to define dist (for example, to .el6_0), rather
than also remembering to define rhel to 6.

* libvirt.spec.in: Guess %{rhel} based on %{dist}.
Based on an idea by Jiri Denemark.
2011-03-16 11:56:00 -06:00
Daniel Veillard
e7aeed0067 Add logrotate support for libvirtd.log
As the file may grow quite a bit especially with debug turned on.
* daemon/libvirtd.logrotate.in daemon/Makefile.am libvirt.spec.in:
  add new logrotate file for the daemon log
2011-03-04 22:43:55 +08:00
Eric Blake
e57f834547 build: add dependency on gnutls-utils
* libvirt.spec.in (Requires): Add gnutls-utils, for virt-pki-validate.
Suggested by Daniel P. Berrange.
2011-02-21 11:18:35 -07:00
Osier Yang
39164c11d3 Requires gettext for client package
libvirt-guests invokes functions in gettext.sh, so we need to
require gettext package in spec file.

Demo with the fix:
% rpm -q gettext
package gettext is not installed

% rpm -ivh libvirt-client-0.8.8-1.fc14.x86_64.rpm
error: Failed dependencies:
	gettext is needed by libvirt-client-0.8.8-1.fc14.x86_64

* libvirt.spec.in
2011-02-18 13:45:13 +08:00
Laine Stump
5754dbd56d Give each virtual network bridge its own fixed MAC address
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=609463

The problem was that, since a bridge always acquires the MAC address
of the connected interface with the numerically lowest MAC, as guests
are started and stopped, it was possible for the MAC address to change
over time, and this change in the network was being detected by
Windows 7 (it sees the MAC of the default route change), so on each
reboot it would bring up a dialog box asking about this "new network".

The solution is to create a dummy tap interface with a MAC guaranteed
to be lower than any guest interface's MAC, and attach that tap to the
bridge as soon as it's created. Since all guest MAC addresses start
with 0xFE, we can just generate a MAC with the standard "0x52, 0x54,
0" prefix, and it's guaranteed to always win (physical interfaces are
never connected to these bridges, so we don't need to worry about
competing numerically with them).

Note that the dummy tap is never set to IFF_UP state - that's not
necessary in order for the bridge to take its MAC, and not setting it
to UP eliminates the clutter of having an (eg) "virbr0-nic" displayed
in the output of the ifconfig command.

I chose to not auto-generate the MAC address in the network XML
parser, as there are likely to be consumers of that API that don't
need or want to have a MAC address associated with the
bridge.

Instead, in bridge_driver.c when the network is being defined, if
there is no MAC, one is generated. To account for virtual network
configs that already exist when upgrading from an older version of
libvirt, I've added a %post script to the specfile that searches for
all network definitions in both the config directory
(/etc/libvirt/qemu/networks) and the state directory
(/var/lib/libvirt/network) that are missing a mac address, generates a
random address, and adds it to the config (and a matching address to
the state file, if there is one).

docs/formatnetwork.html.in: document <mac address.../>
docs/schemas/network.rng: add nac address to schema
libvirt.spec.in: %post script to update existing networks
src/conf/network_conf.[ch]: parse and format <mac address.../>
src/libvirt_private.syms: export a couple private symbols we need
src/network/bridge_driver.c:
    auto-generate mac address when needed,
    create dummy interface if mac address is present.
tests/networkxml2xmlin/isolated-network.xml
tests/networkxml2xmlin/routed-network.xml
tests/networkxml2xmlout/isolated-network.xml
tests/networkxml2xmlout/routed-network.xml: add mac address to some tests
2011-02-17 13:36:32 -05:00
Osier Yang
df1011ca8e storage: Allow to delete device mapper disk partition
The name convention of device mapper disk is different, and 'parted'
can't be used to delete a device mapper disk partition. e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Error: Expecting a partition number.

This patch introduces 'dmsetup' to fix it.

Changes:
  - New function "virIsDevMapperDevice" in "src/utils/utils.c"
  - remove "is_dm_device" in "src/storage/parthelper.c", use
    "virIsDevMapperDevice" instead.
  - Requires "device-mapper" for 'with-storage-disk" in "libvirt.spec.in"
  - Check "dmsetup" in 'configure.ac' for "with-storage-disk"
  - Changes on "src/Makefile.am" to link against libdevmapper
  - New entry for "virIsDevMapperDevice" in "src/libvirt_private.syms"

Changes from v1 to v3:
  - s/virIsDeviceMapperDevice/virIsDevMapperDevice/g
  - replace "virRun" with "virCommand"
  - sort the list of util functions in "libvirt_private.syms"
  - ATTRIBUTE_NONNULL(1) for virIsDevMapperDevice declaration.

e.g.

Name                 Path
-----------------------------------------
3600a0b80005ad1d7000093604cae912fp1 /dev/mapper/3600a0b80005ad1d7000093604cae912fp1

Vol /dev/mapper/3600a0b80005ad1d7000093604cae912fp1 deleted

Name                 Path
-----------------------------------------
2011-02-17 15:29:07 +08:00
Daniel Veillard
43f8773c1f Release of libvirt-0.8.8
* configure.ac docs/news.html.in libvirt.spec.in: bump version and add docs
* po/*.po*: updated Gujarati, Polish and Dutch localisations and regenerated
2011-02-17 12:11:03 +08:00
Daniel P. Berrange
cee61fc298 Imprint all logs with version + package build information
The logging functions are enhanced so that immediately prior to
the first log message being printed to any output channel, the
libvirt package version will be printed.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:13:28.013: 17536: info : libvirt version: 0.8.7
 18:13:28.013: 17536: debug : virInitialize:361 : register drivers
 ...

The 'configure' script gains two new arguments which can be
used as

   --with-packager="Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10"
   --with-packager-version="1.fc14"

to allow distros to append a custom string with package specific
data.

The RPM specfile is modified so that it appends the RPM version,
the build host, the build date and the packager name.

eg

 $ LIBVIRT_DEBUG=1 virsh
 18:14:52.086: 17551: info : libvirt version: 0.8.7, package: 1.fc13 (Fedora Project, x86-01.phx2.fedoraproject.org, 01-27-2011-18:00:10)
 18:14:52.086: 17551: debug : virInitialize:361 : register drivers

Thus when distro packagers receive bug reports they can clearly
see what version was in use, even if the bug reporter mistakenly
or intentionally lies about version/builds

* src/util/logging.c: Output version data prior to first log message
* libvirt.spec.in: Include RPM release, date, hostname & packager
* configure.ac: Add --with-packager & --with-packager-version args
2011-02-11 14:13:08 +00:00