Commit Graph

12823 Commits

Author SHA1 Message Date
Osier Yang
664270b849 Support seclabels for volume type disk
"seclabels" is only valid for 'file' or 'block' type storage volume.
2013-04-08 18:59:50 +08:00
Osier Yang
43404fee37 Support startupPolicy for 'volume' disk
"startupPolicy" is only valid for file type storage volume, otherwise
it fails on starting the domain.
2013-04-08 18:54:37 +08:00
Osier Yang
db94a1d3a0 qemu: Translate the pool disk source when building drive string
This adds a new helper qemuTranslateDiskSourcePool which uses the
storage pool/vol APIs to translate the disk source before building
the drive string. Network volume is not supported yet. Disk chain
for volume type disk may be supported later, but before I'm confident
it doesn't break anything, it's just disabled now.
2013-04-08 18:54:17 +08:00
Osier Yang
4bc331c894 Introduce new XMLs to specify disk source using libvirt storage
With this patch, one can specify the disk source using libvirt
storage like:

  <disk type='volume' device='disk'>
    <driver name='qemu' type='raw' cache='none'/>
    <source pool='default' volume='fc18.img'/>
    <target dev='vdb' bus='virtio'/>
  </disk>

"seclabels" and "startupPolicy" are not supported for this new
disk type ("volume"). They will be supported in later patches.

docs/formatdomain.html.in:
  * Add documents for new XMLs
docs/schemas/domaincommon.rng:
  * Add rng for new XMLs;
src/conf/domain_conf.h:
  * New struct for 'volume' type disk source (virDomainDiskSourcePoolDef)
  * Add VIR_DOMAIN_DISK_TYPE_VOLUME for enum virDomainDiskType
src/conf/domain_conf.c:
  * New helper virDomainDiskSourcePoolDefParse to parse the 'volume'
    type disk source.
  * New helper virDomainDiskSourcePoolDefFree to free the source def
    if 'volume' type disk.
tests/qemuxml2argvdata/qemuxml2argv-disk-source-pool.xml:
tests/qemuxml2xmltest.c:
  * New test
2013-04-08 18:48:14 +08:00
Osier Yang
a05b0fc1ab conf: New helper virDomainDiskSourceDefFormat to format the disk source
The code to format disk source is long enough to have a helper.
2013-04-08 18:45:52 +08:00
Osier Yang
f5a610872a storage: Guess the parent if it's not specified for vHBA
This finds the parent for vHBA by iterating over all the HBA
which supports vport_ops capability on the host, and return
the first one which is online, not saturated (vports in use
is less than max_vports).
2013-04-08 18:41:07 +08:00
Osier Yang
34f9651005 storage: Add startPool and stopPool for scsi backend
startPool creates the vHBA if it's not existed yet, stopPool destroys
the vHBA. Also to support autostart, checkPool will creates the vHBA
if it's not existed yet.
2013-04-08 18:41:06 +08:00
Osier Yang
b52fbad150 util: Add helper to get the scsi host name by iterating over sysfs
The helper iterates over sysfs, to find out the matched scsi host
name by comparing the wwnn,wwpn pair. It will be used by checkPool
and refreshPool of storage scsi backend. New helper getAdapterName
is introduced in storage_backend_scsi.c, which uses the new util
helper virGetFCHostNameByWWN to get the fc_host adapter name.
2013-04-08 18:41:06 +08:00
Osier Yang
b78db1c365 phyp: Prohibit fc_host adapter for phyp driver
It's possible to support fc_host adapter for phyp driver too, but
at this stage I'd like to not allow it when I'm not that clear
how it works.
2013-04-08 18:41:06 +08:00
Osier Yang
6cf9a5bb90 storage: Move virStorageBackendSCSIGetHostNumber into iscsi backend
It's only used by iscsi backend.
2013-04-08 18:41:06 +08:00
Osier Yang
c1f63a9bdf storage: Make the adapter name be consistent with node device driver
node device driver names the HBA like "scsi_host5", but storage
driver uses "host5", which could make the user confused. This
changes them to be consistent. However, for back-compat reason,
adapter name like "host5" is still supported.
2013-04-08 18:41:06 +08:00
Osier Yang
9f781da69d New XML attributes for storage pool source adapter
This introduces 4 new attributes for storage pool source adapter.
E.g.

<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>

Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.

* docs/formatstorage.html.in:
  - Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
  - Add RNG schema
* src/conf/storage_conf.c:
  - Parse and format the new XMLs
* src/conf/storage_conf.h:
  - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
  - New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
  - Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
  - Replace "adapter" with "adapter.data.name", which is member of the union
    of the new struct virStoragePoolSourceAdapter now. Later patch will
    add the checking, as "adapter.data.name" is only valid for "scsi_host"
    adapter.
* src/storage/storage_backend_scsi.c:
  - Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
  - New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
  - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
    specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
  - New test
* tests/storagepoolxml2xmltest.c:
  - Include the test
2013-04-08 18:41:06 +08:00
Daniel P. Berrange
2d77704509 Avoid cast alignment warnings in port allocator test
To avoid

virportallocatortest.c: In function 'bind':
virportallocatortest.c:34:33: warning: cast increases required alignment of target type [-Wcast-align]
     struct sockaddr_in *saddr = (struct sockaddr_in *)addr;
                                 ^

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
e57aaa6fcf Disable cast-align warnings in various places
There are a number of places which generate cast alignment
warnings, which are difficult or impossible to address. Use
pragmas to disable the warnings in these few places

conf/nwfilter_conf.c: In function 'virNWFilterRuleDetailsParse':
conf/nwfilter_conf.c:1806:16: warning: cast increases required alignment of target type [-Wcast-align]
         item = (nwItemDesc *)((char *)nwf + att[idx].dataIdx);
conf/nwfilter_conf.c: In function 'virNWFilterRuleDefDetailsFormat':
conf/nwfilter_conf.c:3238:16: warning: cast increases required alignment of target type [-Wcast-align]
         item = (nwItemDesc *)((char *)def + att[i].dataIdx);

storage/storage_backend_mpath.c: In function 'virStorageBackendCreateVols':
storage/storage_backend_mpath.c:247:17: warning: cast increases required alignment of target type [-Wcast-align]
         names = (struct dm_names *)(((char *)names) + next);

nwfilter/nwfilter_dhcpsnoop.c: In function 'virNWFilterSnoopDHCPDecode':
nwfilter/nwfilter_dhcpsnoop.c:994:15: warning: cast increases required alignment of target type [-Wcast-align]
         pip = (struct iphdr *) pep->eh_data;
nwfilter/nwfilter_dhcpsnoop.c:1004:11: warning: cast increases required alignment of target type [-Wcast-align]
     pup = (struct udphdr *) ((char *) pip + (pip->ihl << 2));

nwfilter/nwfilter_learnipaddr.c: In function 'procDHCPOpts':
nwfilter/nwfilter_learnipaddr.c:327:33: warning: cast increases required alignment of target type [-Wcast-align]
                 uint32_t *tmp = (uint32_t *)&dhcpopt->value;
nwfilter/nwfilter_learnipaddr.c: In function 'learnIPAddressThread':
nwfilter/nwfilter_learnipaddr.c:501:43: warning: cast increases required alignment of target type [-Wcast-align]
                     struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:538:43: warning: cast increases required alignment of target type [-Wcast-align]
                     struct iphdr *iphdr = (struct iphdr*)(packet +
nwfilter/nwfilter_learnipaddr.c:544:48: warning: cast increases required alignment of target type [-Wcast-align]
                         struct udphdr *udphdr= (struct udphdr *)

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
7e6aabc61f Copy struct inotify_event entries to avoid alignment problems
When reading the inotify FD, we get back a sequence of
struct inotify_event, each with variable length data following.
It is not safe to simply cast from the char *buf to the
struct inotify_event struct since this may violate data
alignment rules. Thus we must copy from the char *buf
into the struct inotify_event instance before accessing
the data.

uml/uml_driver.c: In function 'umlInotifyEvent':
uml/uml_driver.c:327:13: warning: cast increases required alignment of target type [-Wcast-align]
         e = (struct inotify_event *)tmp;

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
c4f9edf1a1 Use VIR_ALLOC_VAR instead of VIR_ALLOC_N for creating virObject
The current way virObject instances are allocated using
VIR_ALLOC_N causes alignment warnings

util/virobject.c: In function 'virObjectNew':
util/virobject.c:195:11: error: cast increases required alignment of target type [-Werror=cast-align]

Changing to use VIR_ALLOC_VAR will avoid the need todo
the casts entirely.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
e95de74d4c Avoid casts between unsigned char * and struct nlmsghdr
The virNetlinkCommand() method takes an 'unsigned char **'
parameter to be filled with the received netlink message.
The callers then immediately cast this to 'struct nlmsghdr',
triggering (bogus) warnings about increasing alignment
requirements

util/virnetdev.c: In function 'virNetDevLinkDump':
util/virnetdev.c:1300:12: warning: cast increases required alignment of target type [-Wcast-align]
     resp = (struct nlmsghdr *)*recvbuf;
            ^
util/virnetdev.c: In function 'virNetDevSetVfConfig':
util/virnetdev.c:1429:12: warning: cast increases required alignment of target type [-Wcast-align]
     resp = (struct nlmsghdr *)recvbuf;

Since all callers cast to 'struct nlmsghdr' we can avoid
the warning problem entirely by simply changing the
signature of virNetlinkCommand to return a 'struct nlmsghdr **'
instead of 'unsigned char **'. The way we do the cast inside
virNetlinkCommand does not have any alignment issues.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:21 +01:00
Daniel P. Berrange
d27efd8e5d Rewrite keycode map to avoid a struct
Playing games with field offsets in a struct causes all sorts
of alignment warnings on ARM platforms

util/virkeycode.c: In function '__virKeycodeValueFromString':
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
     (*(typeof(field_type) *)((char *)(object) + field_offset))
       ^
util/virkeycode.c:91:28: note: in expansion of macro 'getfield'
         const char *name = getfield(virKeycodes + i, const char *, name_offset);
                            ^
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
     (*(typeof(field_type) *)((char *)(object) + field_offset))
       ^
util/virkeycode.c:94:20: note: in expansion of macro 'getfield'
             return getfield(virKeycodes + i, unsigned short, code_offset);
                    ^
util/virkeycode.c: In function '__virKeycodeValueTranslate':
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
     (*(typeof(field_type) *)((char *)(object) + field_offset))
       ^
util/virkeycode.c:127:13: note: in expansion of macro 'getfield'
         if (getfield(virKeycodes + i, unsigned short, from_offset) == key_value)
             ^
util/virkeycode.c:26:7: warning: cast increases required alignment of target type [-Wcast-align]
     (*(typeof(field_type) *)((char *)(object) + field_offset))
       ^
util/virkeycode.c:128:20: note: in expansion of macro 'getfield'
             return getfield(virKeycodes + i, unsigned short, to_offset);

There is no compelling reason to use a struct for the keycode
tables. It can easily just use an array of arrays instead,
avoiding all alignment problems

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:20 +01:00
Daniel P. Berrange
15d8511b41 Add a test suite for keycode mapping functions
Validate that translations between different keycode sets
are functioning.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-08 10:03:20 +01:00
Osier Yang
fd1432c7ae qemu: Error out if the bitmap for pinning is all clear
For both "live" and "config" changes of vcpupin and emulatorpin, an
all clear bitmap doesn't make sense, and it can just cause corruptions.
E.g (similar for emulatorpin).

% virsh vcpupin hame 0 8,^8 --config

% virsh vcpupin hame
VCPU: CPU Affinity
----------------------------------
   0:
   1: 0-63
   2: 0-63
   3: 0-63

% virsh dumpxml hame | grep cpuset
    <vcpupin vcpu='0' cpuset=''/>

% virsh start hame
error: Failed to start domain hame
error: An error occurred, but the cause is unknown
2013-04-06 10:16:59 +08:00
Osier Yang
1acfc171da util: Add a helper to check if all bits of a bitmap are clear 2013-04-06 10:14:21 +08:00
Osier Yang
d4bf0a9378 qemu: Support multiple queue virtio-scsi
This introduce a new attribute "num_queues" (same with the good name
QEMU uses) for virtio-scsi controller. An example of the XML:

<controller type='scsi' index='0' model='virtio-scsi' num_queues='8'/>

The corresponding QEMU command line:

-device virtio-scsi-pci,id=scsi0,num_queues=8,bus=pci.0,addr=0x3 \
2013-04-06 10:08:47 +08:00
Eric Blake
5899e09e61 build: check correct protocol.o file
By default, libtool builds two .o files for every .lo rule:
src/foo.o - static builds
src/.libs/foo.o - shared library builds

But since commit ad42b34b disabled static builds, src/foo.o is
no longer built by default.  On a fresh checkout, this means our
protocol check rules using pdwtags were testing a missing file,
and thanks to a lousy behavior of pdwtags happily giving no output
and 0 exit status (http://bugzilla.redhat.com/949034), we were
merely claiming that "dwarves is too old" and skipping the test.

However, if you swap between branches and do incremental builds,
such as building v0.10.2-maint and then switching back to master,
you end up with src/foo.o being leftover from its 0.10.2 state,
and then 'make check' fails because the .o file does not match
the protocol-structs file due to API additions in the meantime.

A simpler fix would be to always look in .libs for the .o to
be parsed; but since it is possible to pass ./configure options
to tell libtool to do a static-only build with no shared .o,
I went with the approach of finding the newest of the two files,
whenever both exist.

* src/Makefile.am (PDWTAGS): Ensure we test just-built file.
2013-04-05 11:23:18 -06:00
Eric Blake
00d69b4af1 build: use proper pod for nested bulleted VIRSH_DEBUG list
Newer pod (hello rawhide) complains if you attempt to mix bullets
and non-bullets in the same list:

virsh.pod around line 3177: Expected text after =item, not a bullet

As our intent was to nest an inner list, we make that explicit to
keep pod happy.

* tools/virsh.pod (ENVIRONMENT): Use correct pod syntax.
2013-04-05 10:02:33 -06:00
Peter Krempa
ce65b43589 qemu: Remove maximum cpu limit when setting processor count using the API
When setting processor count for a domain using the API libvirt enforced
a maximum processor count, while it isn't enforced when taking the XML path.

This patch removes the check to match the XML.
2013-04-05 15:36:00 +02:00
Daniel P. Berrange
56f27b3bbc Don't create dirs in cgroup controllers we don't want to use
Currently when getting an instance of virCgroupPtr we will
create the path in all cgroup controllers. Only at the virt
driver layer are we attempting to filter controllers. This
is bad because the mere act of creating the dirs in the
controllers can have a functional impact on the kernel,
particularly for performance.

Update the virCgroupForDriver() method to accept a bitmask
of controllers to use. Only create dirs in the controllers
that are requested. When creating cgroups for domains,
respect the active controller list from the parent cgroup

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:54 +01:00
Daniel P. Berrange
804a809a06 Rename virCgroupGetAppRoot to virCgroupForSelf
The virCgroupGetAppRoot is not clear in its meaning. Change
to virCgroupForSelf to highlight that this returns the
cgroup config for the caller's process

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:54 +01:00
Daniel P. Berrange
b1d3154a50 Ensure LD_PRELOAD exists before running test case
The linker will ignore LD_PRELOAD libraries which do not
exist, just printing a warning message. This is not helpful
for the test suite which will be utterly fubar without the
preload library present. Add an explicit test for existence
of the library to protect against this

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:41:46 +01:00
Daniel P. Berrange
8ef2b2c5b1 Refactor RNG schema for resource tuning
Split the "resource" define out into multiple smaller
defines, one for each type of resource tuning parameter.
This makes the schema a bit clearer to read

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-05 10:40:21 +01:00
Peter Krempa
8ad126e695 rpc: Fix connection close callback race condition and memory corruption/crash
The last Viktor's effort to fix the race and memory corruption unfortunately
wasn't complete in the case the close callback was not registered in an
connection. At that time, the trail of event's that I'll describe later could
still happen and corrupt the memory or cause a crash of the client (including
the daemon in case of a p2p migration).

Consider the following prerequisities and trail of events:
Let's have a remote connection to a hypervisor that doesn't have a close
callback registered and the client is using the event loop. The crash happens in
cooperation of 2 threads. Thread E is the event loop and thread W is the worker
that does some stuff. R denotes the remote client.

1.) W - The client finishes everything and sheds the last reference on the client
2.) W - The virObject stuff invokes virConnectDispose that invokes doRemoteClose
3.) W - the remote close method invokes the REMOTE_PROC_CLOSE RPC method.
4.) W - The thread is preempted at this point.
5.) R - The remote side receives the close and closes the socket.
6.) E - poll() wakes up due to the closed socket and invokes the close callback
7.) E - The event loop is preempted right before remoteClientCloseFunc is called
8.) W - The worker now finishes, and frees the conn object.
9.) E - The remoteClientCloseFunc accesses the now-freed conn object in the
        attempt to retrieve pointer for the real close callback.
10.) Kaboom, corrupted memory/segfault.

This patch tries to fix this by introducing a new object that survives the
freeing of the connection object. We can't increase the reference count on the
connection object itself or the connection would never be closed, as the
connection is closed only when the reference count reaches zero.

The new object - virConnectCloseCallbackData - is a lockable object that keeps
the pointers to the real user registered callback and ensures that the
connection callback is either not called if the connection was already freed or
that the connection isn't freed while this is being called.
2013-04-05 10:36:03 +02:00
Peter Krempa
69ab07560a virsh: Register and unregister the close callback also in cmdConnect
This patch improves the error message after disconnecting from the
hypervisor and adds the close callback operations required not to leak
the callback reference.
2013-04-05 10:36:03 +02:00
Peter Krempa
ca9e73ebb6 virsh: Move cmdConnect from virsh-host.c to virsh.c
The function is used to establish connection so it should be in the main
virsh file. This movement also enables further improvements done in next
patches.

Note that the "connect" command has moved from the host section of virsh to the
main section. It is now listed by 'virsh help virsh' instead of 'virsh help
host'.
2013-04-05 10:36:03 +02:00
Viktor Mihajlovski
e964ba2786 virsh: Unregister the connection close notifier upon termination
Before closing the connection we unregister the close callback
to prevent a reference leak.

Further, the messages on virConnectClose != 0 are a bit more specific
now.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-04-05 10:36:03 +02:00
Viktor Mihajlovski
03a43efa86 libvirt: Increase connection reference count for callbacks
By adjusting the reference count of the connection object we
prevent races between callback function and virConnectClose.

Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
2013-04-05 10:36:02 +02:00
Peter Krempa
482e5f159c virCaps: get rid of defaultConsoleTargetType callback
This patch refactors various places to allow removing of the
defaultConsoleTargetType callback from the virCaps structure.

A new console character device target type is introduced -
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_NONE - to mark that no type was
specified in the XML. This type is at the end converted to the standard
VIR_DOMAIN_CHR_CONSOLE_TARGET_TYPE_SERIAL. Other types that are
different from this default have to be processed separately in the
device post parse callback.
2013-04-04 22:42:39 +02:00
Peter Krempa
46becc18ba virCaps: get rid of macPrefix field
Use the virDomainXMLConf structure to hold this data and tweak the code
to avoid semantic change.

Without configuration the KVM mac prefix is used by default. I chose it
as it's in the privately administered segment so it should be usable for
any purposes.
2013-04-04 22:42:38 +02:00
Peter Krempa
8960d65674 virCaps: get rid of hasWideScsiBus
Use the virDomainXMLConf structure to hold this data.
2013-04-04 22:42:38 +02:00
Peter Krempa
b299084988 virCaps: get rid of defaultDiskDriverType
Use the qemu specific callback to fill this data in the qemu driver as
it's the only place where it was used and fix tests as the qemu test
capability object didn't configure the defaults for the tests.
2013-04-04 22:42:38 +02:00
Peter Krempa
b5def001cc virCaps: get rid of emulatorRequired
This patch removes the emulatorRequired field and associated
infrastructure from the virCaps object. Instead the driver specific
callbacks are used as this field isn't enforced by all drivers.

This patch implements the appropriate callbacks in the qemu and lxc
driver and moves to check to that location.
2013-04-04 22:42:38 +02:00
Peter Krempa
9ea249e7d9 virCaps: get rid of defaultDiskDriverName
This patch removes the defaultDiskDriverName from the virCaps
structure. This particular default value is used only in the qemu driver
so this patch uses the recently added callback to fill the driver name
if it's needed instead of propagating it through virCaps.
2013-04-04 22:42:38 +02:00
Peter Krempa
4750c848e9 virCaps: get rid of "defaultInitPath" value in the virCaps struct
This gets rid of the parameter in favor of using the new callback
infrastructure to do the same stuff.

This patch implements the domain adjustment callback in the openVZ
driver and moves the check from the parser to a new validation method in
the callback infrastructure.
2013-04-04 22:42:37 +02:00
Peter Krempa
a68d672667 qemu: Record the default NIC model in the domain XML
This patch implements the devices post parse callback and uses it to fill
the default qemu network card model into the XML if none is specified.

Libvirt assumes that the network card model for qemu is the "rtl8139".
Record this in the XML using the new callback to avoid user
confusion.
2013-04-04 22:41:20 +02:00
Peter Krempa
ad0d10b2b1 conf callback: Rearrange function parameters
Move the xmlopt and caps arguments to the end of the argument list.
2013-04-04 22:41:19 +02:00
Peter Krempa
43b99fc4c0 conf: Add post XML parse callbacks and prepare for cleaning of virCaps
This patch adds instrumentation that will allow hypervisor drivers to
fill and validate domain and device definitions after parsed by the XML
parser.

With this patch, after the XML is parsed, a callback to the driver is
issued requesting to fill and validate driver specific details of the
configuration. This allows to use sensible defaults and checks on a per
driver basis at the time the XML is parsed.

Two callback pointers are stored in the new virDomainXMLConf object:
* virDomainDeviceDefPostParseCallback (devicesPostParseCallback)
  - called for a single device parsed and for every single device in a
    domain config. A virDomainDeviceDefPtr is passed along with the
    domain definition and virCaps.

* virDomainDefPostParseCallback, (domainPostParseCallback)
  - A callback that is meant to process the domain config after it's
  parsed.  A virDomainDefPtr is passed along with virCaps.

Both types of callbacks support arbitrary opaque data passed for the
callback functions.

Errors may be reported in those callbacks resulting in a XML parsing
failure.
2013-04-04 22:29:48 +02:00
Peter Krempa
e84b19316a maint: Rename xmlconf to xmlopt and virDomainXMLConfig to virDomainXMLOption
This patch is the result of running:

for i in $(git ls-files | grep -v html | grep -v \.po$ ); do
  sed -i -e "s/virDomainXMLConf/virDomainXMLOption/g" -e "s/xmlconf/xmlopt/g" $i
done

and a few manual tweaks.
2013-04-04 22:18:56 +02:00
Daniel P. Berrange
8d3d05d3c1 Create fake NUMA info if libnuma isn't available
If libnuma is not compiled in, or numa_available() returns an
error, stub out fake NUMA info consisting of one NUMA cell
containing all CPUs and memory.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:32 +01:00
Daniel P. Berrange
4a2891510b Cope with missing /sys/devices/system/cpu/cpu0/topology files
Not all kernel builds have any entries under the location
/sys/devices/system/cpu/cpu0/topology. We already cope with
that being missing in some cases, but not all. Update the
code which looks for thread_siblings to cope with the missing
file

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:32 +01:00
Daniel P. Berrange
9c29c52c5a Add armv6l architecture to list of valid arches
The Raspberry Pi runs the armv6l architecture and apparently
people are trying to run libvirt LXC on it. So we should allow
that as a valid arch

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:32 +01:00
Daniel P. Berrange
347081effa Implement minimal sysinfo for ARM platforms
Implement the bare minimal sysinfo for ARM platforms by
reading the CPU models from /proc/cpuinfo

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:31 +01:00
Daniel P. Berrange
0464ab183d Disable of unused sysinfotest functions
Certain functions in the sysinfotest.c are not used unless
a whitelisted architecture is being built. Disable those
functions unless required to avoid warnings about unused
functions.

sysinfotest.c:93:1: warning: 'sysinfotest_run' defined but not used [-Wunused-function]
 sysinfotest_run(const char *test,

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2013-04-04 11:07:00 +01:00