All APIs using FD passing have this check to prevent sending a
'VIR_NET_CALL_WITH_FDS' to an older daemon but
virDomainCreateXMLWithFiles was missing it.
Now the LXC driver was historically not exposing
VIR_DRV_FEATURE_FD_PASSING, but that is not a problem as LXC always goes
through the remote driver which intercepts it and injects
VIR_DRV_FEATURE_FD_PASSING when it was implemented.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The feature implies that fd passing works with RPC. Non-remote impls
thus should always report support.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The fix was on RPC level so everything should advertise it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This was a lockout to make strings in typed parameters compatible with
versions which didn't have them. Now all drivers need to expose this
capability.
This namely enables it for 'esx' and 'vz' drivers, while they don't seem
to be implementing any parameters for now, they might later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
They are features of the RPC; drivers must say that it's not supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
keepalive is a RPC feature, drivers must say that it's not supported.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
VIR_DRV_FEATURE_REMOTE is a special flag which is asserted only when the
connection is remote. All drivers implementing it must return 0 for it
to work. Handle it in the global handler and add a comment why.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The 'virDrvFeature' has a combination of features which are asserted by
the specific driver and features which are actually global.
In many cases the implementation was cargo-culted into newer drivers
without re-assesing whether it makes sense.
This patch introduces a global function which will specifically handle
these global flags and defer the rest to the driver.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
The destination daemon would crash in Finish phase due to NULL
dereference which I missed in my review of commit
v8.0.0-428-g0301db44e2
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuDomainSnapshotForEachQcow2Raw' doesn't properly handle the
'VIR_DOMAIN_SNAPSHOT_LOCATION_NONE' setting and thus doesn't skip disks
which were excluded from the snapshot due to being read-only.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
When installing openrc init scripts, we take whatever mode the
generated files are in an copy them under /etc/init.d/. This is
not ideal, because those files are not executable and they should
be.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/250
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
This transition will make it easier for me to generalize jobs in
the future as they will always use virDomainJobData and
virDomainJobInfo will be only used in the public api..
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We only need to set statsType in almost every case of setting
something from private data, so it seems unnecessary to pull
privateData out of current / completed job for just this one
thing every time. I think this patch keeps the code cleaner
without variables used just once.
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
This patch includes:
* introducing new files: src/hypervisor/domain_job.c and src/hypervisor/domain_job.h
* new struct virDomainJobData, which is almost the same as
qemuDomainJobInfo - the only differences are moving qemu specific
job stats into the qemuDomainJobDataPrivate and adding jobType
(possibly more attributes in the future if needed).
* moving qemuDomainJobStatus to the domain_job.h and renaming it
as virDomainJobStatus
* moving and renaming qemuDomainJobStatusToType
* adding callback struct virDomainJobDataPrivateDataCallbacks
taking care of allocation, copying and freeing of private data
of virDomainJobData
* adding functions for virDomainJobDataPrivateDataCallbacks for
qemu hypervisor
* adding 'public' (public between the different hypervisors) functions
taking care of init, copy, free of virDomainJobData
* renaming every occurrence of qemuDomainJobInfo *info to
virDomainJobData *data
Signed-off-by: Kristina Hanicova <khanicov@redhat.com>
Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
We don't want to be dealing with real FDs thus we mock
'qemuMonitorIOWriteWithFD' to do the same thing as when no FD is being
passed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Adding an exception for the whole file usually defeats the purpose of a
syntax check and is also likely to get forgotten once the file is
removed.
In case of the suggestion of using 'safewrite' instead of write even the
comment for safewrite states that the function needs to be used only in
certain cases.
Remove the blanket exceptions for files and use an exclude string
instead. The only instance where we keep the full file exception is for
src/libvirt-stream.c as there are multiple uses in example code in
comments where I couldn't find a nicer targetted wapproach.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In order to mock the SCM_RIGHTS sendmsg to simulate sending
filedescriptors to fake qemu in tests we need access to some fields of
'struct _qemuMonitor'. Move its declaration to the private header file.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the declaration of the struct into 'qemu_monitor_priv.h' as other
code has no business in peeking into the monitor messages.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The fields are no longer used since we've deleted support for HMP-only
qemus. The HMP command pass-through works via a QMP command.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit dc481f11a61 which converted the function generating properties
for disk '-device' argument to JSON removed the only other use of
qemuBuildDiskFrontendAttributeErrorPolicy, so we can now inline it into
qemuBuildDriveStr.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since 'cancel_path' is constructed from the 'tpmdev' argument, we can
push it down into the function opening the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Automatically free 'path' inside the loop which fills it and return the
values directly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Setup the chardev similarly to how we do it on startup so that virtlogd
is properly used with chardevs which are hotplugged to a VM.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When hotplugging a chardev we need the same form of setup for the
character device. Export a version which takes a 'virDomainDeviceDef'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
FD passing and TLS is normally setup via private data for the chardev
source. The monitor implementation didn't support it.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Our code uses fdsets for the pipe passed from virtlogd to qemu, but the
chardev hot-unplug code neglected to detach the fdset after the chardev
was removed. This kept the FDs open by qemu even after they were not
used any more.
After the refactor to use qemuFDPass for chardevs we now configure the
'opaque' field for fdsets used for chardevs so we can use
qemuHotplugRemoveFDSet to remove the unused fdset.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Rewrite the parts which already pass FDs via fdset or directly to use
the new infrastructure.
Apart from simpler code this also adds the appropriate names to the fds
in the fdsets which will allow us to properly remove the fdsets won
hot-unplug of chardevs, which we didn't do for now and resulted in
leaking the FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Prefix the file descriptor name with the alias of the network device so
that it's similar to other upcoming use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
For now we have only one code path ('vdpa' interface) which actually
cleans up the fdset after it's done, but there are more device types
using fdsets.
In order to unify the handling of fdsets the removal code will now be
able to remove fdsets based on a prefix of the 'opaque' field, which
we'll always prefix with a device alias or e.g. node name once fdsets
are also used for disk backing.
To keep compatibility with old QEMUs, retain the possibility for the
VDPA interface to use the path.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The code unplugging the fdset for a 'vdpa' network device can be later
reused. Extract it into 'qemuHotplugRemoveFDSet'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use the new helpers for passing of the file descriptor needed for 'vdpa'
interfaces.
Apart from the simplification in this case it will allow further changes
to unify all fdset handling.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
The existing helpers we have are very clumsy and there's no integration
with the monitor.
This patch introduces new helpers to bridge the gap and simplify handing
of fdsets and classic FD passing when generating commandline/hotplug
arguments.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
When starting a VM we must assign unique IDs for fdsets we add via
'-add-fd'. For now it was done by using the index of the filedescriptor
passed to the virCommand. That approach is not very flexible, because
you need to have already passed the 'fd' to virCommand before generating
the fdset path, and also won't nicely work with fdsets containing two or
more fds.
This patch introduces a counter into the private data of a qemu domain
so that we can allocate unique ids without relying on virCommand.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Similarly to the 'qemuMonitorRemoveFdset', it doesn't make sense
to store it as signed when only unsigned values are expected.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
'qemuMonitorRemoveFdset' validates that the 'fdset' argument isn't less
than 0. We can turn it to unsigned and thus avoid the error message
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Caller passes 'driver->securityManager', and 'priv->qemuCaps' as
arguments along with 'vm', but both aforementioned objects are
accessible directly from 'vm'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Code paths which don't wish to use FD passing are supposed to not call
the function which sets up the chardev for FD passing.
This is ensured by calling it only in the host prepare step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
In a patch adding similarly named APIs I was asked to use 'ID' instead
of 'Id'. Since the code is being put together fix
qemuDomainStorageIdNew/Reset first.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
They're used only inside qemu_domain.c. Move it before their usage,
and unexport them.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
We can exit early when the input is an empty string, and we can
avoid storing the string length in a variable since we only use
that information once.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The hw.cpufrequency sysctl, which we use to obtain the CPU
frequency on macOS, is not available when running on Apple
Silicon, and as a consequence we currently report an error
whenever such information is requested.
The virNodeInfo.mhz field, where the CPU frequency gets stored,
is documented as being zero when the information could not be
obtained, and we already do that for Linux on aarch64. Extend
this behavior to macOS on Apple Silicon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
If the mutex is part of the `driver` object, it cannot guard that
object's creation and destruction perfectly.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
