Not only we should set the MTU on the host end of the device but
also let qemu know what MTU did we set.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far we allow to set MTU for libvirt networks. However, not all
domain interfaces have to be plugged into a libvirt network and
even if they are, they might want to have a different MTU (e.g.
for testing purposes).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
We use @ret to hold the actual return value of the function we
are currently in. To hold a return value of a function called we
use different variables: @rv, @rc, etc. Honour this naming
scheme in virDomainNetDefParseXML too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The current logic around configuring timers in libxl based on
virDomainDef object is a bit brain dead. Unsupported timers are
silently ignored and tsc is only recognized if it is the first
timer specified.
Change the logic to reject unsupported timers and honor the tsc
timer regardless of its order when multiple timers are specified.
It is destructive to attempt reset on a pci- or cardbus-bridge, the
host can crash. The bridges won't contain any guest data and neither
they can be passed through using vfio/stub. So, no point in allowing a
reset on them.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Non-endpoint devices like pci-bridges cannot be assigned to guests.
Prevent such attempts.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Avoid return with the closeCallbacks locked when get callbacks list for connect fail.
Signed-off-by: Wang King <king.wang@huawei.com>
Signed-off-by: John Ferlan <jferlan@redhat.com>
We lacked of timestamp in tainting of guests log,
which bring troubles for finding guest issues:
such as whether a guest powerdown caused by qemu-monitor-command
or others issues inside guests.
If we had timestamp in tainting of guests log,
it would be helpful when checking guest's /var/log/messages.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
==24748== 12 bytes in 2 blocks are definitely lost in loss record 25 of 84
==24748== at 0x4C2BF80: malloc (vg_replace_malloc.c:296)
==24748== by 0x1A1E1E78: xmlStrndup (in /usr/lib64/libxml2.so.2.9.4)
==24748== by 0x18D0495F: virXMLPropString (virxml.c:506)
==24748== by 0x18D1FB3E: virDomainHostdevSubsysSCSIVHostDefParseXML (domain_conf.c:6280)
==24748== by 0x18D20350: virDomainHostdevDefParseXMLSubsys (domain_conf.c:6450)
==24748== by 0x18D34E7D: virDomainHostdevDefParseXML (domain_conf.c:13218)
==24748== by 0x18D42598: virDomainDefParseXML (domain_conf.c:17745)
==24748== by 0x18D440A9: virDomainDefParseNode (domain_conf.c:18236)
==24748== by 0x18D43EFA: virDomainDefParse (domain_conf.c:18180)
==24748== by 0x18D43FA0: virDomainDefParseFile (domain_conf.c:18206)
==24748== by 0x44EDA1: testCompareDomXML2XMLFiles (testutils.c:1140)
==24748== by 0x4365F8: testXML2XMLActive (qemuxml2xmltest.c:59)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Based on work of Mehdi Abaakouk <sileht@sileht.net>.
When parsing vhost-user interface XML and no ifname is found we
can try to fill it in in post parse callback. The way this works
is we try to make up interface name from given socket path and
then ask openvswitch whether it knows the interface.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The event needs to be emitted after the last monitor call, so that it's
not possible to find the device in the XML accidentally while the vm
object is unlocked.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414393
When generating a domain XML from native command (i.e. via
the connectDomainXMLFromNative call), we should use
interface type 'bridge' rather than 'ethernet' because we only
support bridges at this point.
As we don't have bridge name explicitly specified on the command line,
just use 'virbr0' as a default.
The recent deprecation in glibc (commit b76e065991ec) means the
module will fail to build entirely:
nss/libvirt_nss.c: In function '_nss_libvirt_gethostbyname_r':
nss/libvirt_nss.c:363:13: error: RES_USE_INET6 is deprecated [-Werror]
int af = ((_res.options & RES_USE_INET6) ? AF_INET6 : AF_INET);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This resolver option was removed shortly after being introduced,
and application using it are already broken anyway.
Previous commit tried to change configure logic such that the
GLUSTER_CLI parameter would always be set:
commit 9e97c8c0f0
Author: Peter Krempa <pkrempa@redhat.com>
Date: Mon Jan 9 15:56:12 2017 +0100
storage: gluster: Remove build-time dependency on the 'gluster' cli tool
This missed the fact that the AC_PATH_PROG call was itself inside an 'if'
conditional that would not be called in with_storage_gluster was false. As
a result, GLUSTER_CLI was still conditionally defined.
Just kill the GLUSTER_CLI parameter and AC_PATH_PROG call entirely and pass a
bare "gluster" string to virFindFileInPath instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Previously when QEMU failed "drive_add" due to an error opening
a file it would report
"could not open disk image"
These days though, QEMU reports
"Could not open '/tmp/virtd-test_e3hnhh5/disk1.qcow2': Permission denied"
which we were not detecting as an error condition.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
The iSCSI backend driver was using stuff from the SCSI driver without
making sure that it's compiled in. Move the common code into the
storage_util.c since it does not contain any specific code.
The file backend code was mistakenly put into #if WITH_STORAGE_FS. This
is not necessary since all the backends just access files on disk, and
thus the code for WITH_STORAGE_DIR is sufficient to compile everything.
The file became a garbage dump for all kinds of utility functions over
time. Move them to a separate file so that the files can become a clean
interface for the storage backends.
While local builds succeed fine, a build worker building in a
chroot environment is encountering the following error with
libvirt 3.0.0 release candidates
[ 162s] shunloadtest.o: In function `main':
[ 162s] /home/abuild/rpmbuild/BUILD/libvirt-3.0.0/tests/shunloadtest.c:110: undefined reference to `dlopen'
[ 162s] /home/abuild/rpmbuild/BUILD/libvirt-3.0.0/tests/shunloadtest.c:114: undefined reference to `dlsym'
[ 162s] /home/abuild/rpmbuild/BUILD/libvirt-3.0.0/tests/shunloadtest.c:133: undefined reference to `dlclose'
[ 162s] /home/abuild/rpmbuild/BUILD/libvirt-3.0.0/tests/shunloadtest.c:111: undefined reference to `dlerror'
[ 162s] /home/abuild/rpmbuild/BUILD/libvirt-3.0.0/tests/shunloadtest.c:115: undefined reference to `dlerror'
[ 162s] /home/abuild/rpmbuild/BUILD/libvirt-3.0.0/tests/shunloadtest.c:116: undefined reference to `dlclose'
Fix by appending DLOPEN_LIBS to shunloadtest_LDADD.
This patch will allow --uuid and --name in one cmd.
The pool's UUID and name will be printed side by side.
Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com>
fabric_name is one of many fc_host attributes in Linux that is optional
and left to the low-level driver to decide if it is implemented.
The zfcp device driver does not provide a fabric name for an fcp host.
This patch removes the requirement for a fabric name by making it optional.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
File open errors are prevented by a file exists check before
virFileReadAll is called since all callers of the virReadFCHost
method handle errors themselves based on the NULL return anyway.
Also included is a minor spelling correction in a comment.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1346566
If libvirt_parthelper is erroneously told to append the partition
separator 'p' onto the generated output for a disk pool using device
mapper that has 'user_friendly_names' set to true, then the error
recovery path will fail to find volume resulting in the pool being
in an unusable state.
So, augment the documentation to provide the better hint that the
part_separator='yes' should be set when user_friendly_names are not
being used. Additionally, once we're in the error path where the
returned name doesn't match the expected partition name try to see
if the reason is because the 'p' was erroneosly added. If so alter
the about to be removed vol->target.path so that the DiskDeleteVol
code can find the partition that was created and remove it.
If the voldef type is VIR_STORAGE_VOL_BLOCK, then as long as the
format is known, let's allow the probe to happen - gets a truer value
and the same probe/update would be allowed for the same volume defined
in a domain.
For volume processing in virStorageBackendUpdateVolTargetInfo to get
the capacity commit id 'a760ba3a7' added the ability to probe a volume
that didn't list a target format. Unfortunately, the code used the
virStorageSource (e.g. target->type - virStorageType) rather than
virStorageVolDef (e.g. vol->type - virStorageVolType) in order to
make the comparison. As it turns out target->type for a volume is
not filled in at all for a voldef as the code relies on vol->type.
Ironically the result is that only VIR_STORAGE_VOL_BLOCK's would get
their capacity updated.
This patch will adjust the code to check the "vol->type" field instead
as an argument. This way for a voldef, the correct comparison is made.
Additionally for a backingStore, the 'type' field is never filled in;
however, since we know that the provided path is a location at which
the backing store can be accessed on the local filesystem thus just
pass VIR_STORAGE_VOL_FILE in order to satisfy the adjusted voltype
check. Whether it's a FILE or a BLOCK only matters if we're trying to
get more data based on the target->format.
Starting from a245abce43 another set of tests for
qemuhotplugtest has been introduced. This time for vcpu hotplug.
However, the test data (which live in qemuhotplugtestcpus dir)
are not being distributed properly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The tool is used for pool discovery. Since we call an external binary we
don't really need to compile out the code that uses it. We can check
whether it exists at runtime.
In commit 4090e15399 we went back from reporting no errors if no storage
pools were found on a given host to reporting a bad error. And only in
cases when gluster was not installed.
Report a less bad error in case there are no volumes. Also report the
error when gluster is installed but no volumes were found, since
virStorageBackendFindGlusterPoolSources would return success in that
case.
The cpu hotplug operation is rather complex so the testing code needs to
provide quite lot of data and monitor conversations to successfully test
it. The code mainly tests the selection of cpus according to the target
count request.
Similar to the existing qemuMonitorTestNewFromFile the *Full version
will allow to check both commands and supply responses for a better
monitor testing.
