Commit Graph

47 Commits

Author SHA1 Message Date
Daniel P. Berrangé
bb8ccb050d conf: add control over COW for storage pool directories
The storage pool code now attempts to disable COW by default on btrfs,
but management applications may wish to override this behaviour. Thus we
introduce a concept of storage pool features:

  <features>
    <cow state='yes|no'/>
  </features>

If the <cow> feature policy is set, it will be enforced. It will always
return an hard error if COW cannot be explicitly set or unset.

Reviewed-by: Neal Gompa <ngompa13@gmail.com>
Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-23 16:18:09 +01:00
Pino Toscano
df1a26ebac storage: add vmfs filesystem type
It will be used to represent the type of a filesystem pool in ESXi.

Signed-off-by: Pino Toscano <ptoscano@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
2019-12-20 14:31:08 +01:00
Yi Li
cdd362e0e7 storage: escape ipv6 for ceph mon hosts to librados
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.

Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.

Signed-off-by: Yi Li <yili@winhong.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Ján Tomko <jtomko@redhat.com>
2019-06-18 17:14:17 +02:00
Jason Dillaman
669018bc9c storage: optional 'refresh' elemement on pool
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:

<pool>
...
  <refresh>
    <volume allocation='capacity'/>
  </refresh>
...
</pool>

This is useful for certain backends where computing the actual allocation
of a volume might be an expensive operation.

Signed-off-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2019-03-19 16:46:21 +01:00
Daniel P. Berrangé
4a8d9d4953 storage: change custom namespace URIs to drop '/source' component
The custom namespaces were originally registered against the storage
pool source struct, but during review this was changed to the top level
storage pool struct. The namespace URIs were not updated to match, so
had a redundant '/source' component.

Reviewed-by: John Ferlan <jferlan@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-31 12:34:05 +00:00
John Ferlan
ab6ca81276 rbd: Utilize storage pool namespace to manage config options
Allow for adjustment of RBD configuration options via Storage
Pool XML Namespace adjustments. When namespace arguments are
used to start the pool, add a VIR_WARN to indicate that the
startup was tainted by custom config_opts.

Based off original patch/concept:

https://www.redhat.com/archives/libvir-list/2014-May/msg00940.html

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-29 19:16:25 -05:00
John Ferlan
7a227688a8 storage: Add infrastructure to manage XML namespace options
Introduce the virStoragePoolFSMountOptionsDef to be used to
manage the Storage Pool XML Namespace for mount options.

Using a new virStorageBackendNamespaceInit function, set the
virStoragePoolXMLNamespace into the _virStoragePoolOptions when
the storage backend is loaded.

Modify the storagepool.rng to allow for the usage of a different
XML namespace to parse the fs_mount_opts to be included with
the fs and netfs storage pool definitions.

Modify the storagepoolxml2xmltest to utilize a properly modified
XML file to parse and format the namespace for a netfs storage pool.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-29 19:16:13 -05:00
John Ferlan
801f8cfb37 conf: Add optional NFS Source Pool <protocol ver='n'/> option
Add an optional way to define which NFS Server version will be
used to content the target NFS server.

Signed-off-by: John Ferlan <jferlan@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-01-29 19:15:27 -05:00
Pavel Hrdina
be16f170e7 docs: move storage initiator def into storagecommon.rng
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
2018-08-08 17:33:12 +02:00
Clementine Hayat
f0bf1be3e7 storage: Introduce iscsi_direct pool type
Introducing the pool as a noop. Integration inside the build
system. Implementation will be in the following commits.

Signed-off-by: Clementine Hayat <clem@lse.epita.fr>
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2018-08-06 12:23:55 +02:00
John Ferlan
5d7659027f docs,rng: Adjust storage pool name grammar checks
https://bugzilla.redhat.com/show_bug.cgi?id=1475250

It's possible to define and start a pool with a '.' in the
name; however, when trying to add a volume to a domain using
the storage pool source with a '.' in the storage pool name,
the domain RNG validation fails because RNG uses 'genericName'
which does not allow a '.' in the name.

Domain XML def parsing has a virXMLValidateAgainstSchema which
generates the error. The Storage Pool XML def parsing has no
call to virXMLValidateAgainstSchema. The only Storage Pool name
validation occurs in virStoragePoolDefParseXML to ensure the
name doesn't have a '/' in it and in storagePoolDefineXML to
call virXMLCheckIllegalChars using the same parameter "\n" as
qemuDomainDefineXMLFlags would check after the RNG check
could be succesful.

In order to resolve this, create a poolName definition in
storagecommon.rng that will mimic the domain name regex that
disallows a newline character, but add the "/" in the exclude
list. Then modify the pool and volume source name definitions
to key off that poolName.
2017-10-05 08:10:46 -04:00
Michal Privoznik
ff5c5a9bbb rng: Fix formatting
Some elements are offset just one space compared to their parent,
some are misaligned completely, and so on.

Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
2017-09-12 13:41:21 +02:00
Ján Tomko
8ef12b96fa schema: do not require name for certain pool types
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set
allow omitting the <name> element and instead fill out the pool name
from the <source><name> element.

Relax the schema to make <name> optional for these pools.
Expressing that at least one of these is required is out of scope
of the schema.
2017-03-29 10:36:55 +02:00
Olga Krishtal
a55ddc8774 storage: vstorage pool documentation and simple test
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
2017-01-26 10:43:42 -05:00
John Ferlan
4f84617078 conf: Add storage pool device attribute part_separator
Add a new storage pool source device attribute 'part_separator=[yes|no]'
in order to allow a 'disk' storage pool using a device mapper multipath
device to not add the "p" partition separator to the generated device
name when libvirt_parthelper is run.

This will allow libvirt to find device mapper multipath devices which were
configured in /etc/multipath.conf to use 'user_friendly_names' or custom
'alias' names for the LUN.
2016-01-19 13:02:59 -05:00
John Ferlan
f153832266 docs: Adjust Disk storage rng
Currently the grammar uses "none" for a "valid" Disk Storage Pool
format type; however, virStoragePoolFormatDisk uses "unknown" so
virt-xml-validate will fail to validate when "unknown" is found
2015-06-23 09:25:24 -04:00
John Ferlan
38c9494878 storage: Fix the schema and add tests for cifs pool
Commit id '887dd362' added support for a netfs pool format type 'cifs'
and 'gluster' in order to add rng support for Samba and glusterfs netfs
pools. Originally, the CIFS type support was added as part of commit
id '61fb6979'. Eventually commit id 'b325be12' fixed the gluster rng
definition to match expectations.

As it turns out the CIFS rng needed a similar change since the directory
path is not an absDirPath, rather just a dirPath will be required.
2015-06-15 17:25:33 -04:00
Martin Kletzander
d2632d60aa storage: unify permission formatting
Volume and pool formatting functions took different approaches to
unspecified uids/gids.  When unknown, it is always parsed as -1, but one
of the functions formatted it as unsigned int (wrong) and one as
int (better).  Due to that, our two of our XML files from tests cannot
be parsed on 32-bit machines.

RNG schema needs to be modified as well, but because both
storagepool.rng and storagevol.rng need same schema for permission
element, save some space by moving it to storagecommon.rng.

Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
2014-12-16 15:47:56 +01:00
Erik Skultety
1be67cd31b storage: Fix logical pool fmt type
According to our documentation logical pool supports formats 'auto' and
'lvm2'. However, in storage_conf.c we previously defined storage pool
formats: unknown, lvm2. Due to backward compatibility reasons
we must continue refer to pool format type 'unknown' instead of 'auto'.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1123767
2014-09-29 05:59:09 -04:00
Roman Bogorodskiy
b4af40226d storage: zfs: implement pool build and delete
- Provide an implementation for buildPool and deletePool operations
   for the ZFS storage backend.
 - Add VIR_STORAGE_POOL_SOURCE_DEVICE flag to ZFS pool poolOptions
   as now we can specify devices to build pool from
 - storagepool.rng: add an optional 'sourceinfodev' to 'sourcezfs' and
   add an optional 'target' to 'poolzfs' entity
 - Add a couple of tests to storagepoolxml2xmltest
2014-09-18 18:08:29 +04:00
Roman Bogorodskiy
0257d06ba4 storage: ZFS support
Implement ZFS storage backend driver. Currently supported
only on FreeBSD because of ZFS limitations on Linux.

Features supported:

 - pool-start, pool-stop
 - pool-info
 - vol-list
 - vol-create / vol-delete

Pool definition looks like that:

 <pool type='zfs'>
  <name>myzfspool</name>
  <source>
    <name>actualpoolname</name>
  </source>
 </pool>

The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.

User has to create a pool on his own, this driver doesn't
support pool creation currently.

A volume could be used with Qemu by adding an entry like this:

    <disk type='volume' device='disk'>
      <driver name='qemu' type='raw'/>
      <source pool='myzfspool' volume='vol5'/>
      <target dev='hdc' bus='ide'/>
    </disk>
2014-08-12 19:40:20 +04:00
Peter Krempa
b325be128a schema: pool: netfs: Don't enforce slash in glusterfs pool source
Gluster volumes don't start with a leading slash. Our schema for netfs
gluster pools enforces it though. Luckily mount.glusterfs skips it.
Allow a slashless volume name for glusterfs netfs mounts in the schema.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1101999
2014-07-21 18:28:17 +02:00
Eric Blake
ed5fa7f393 storage: document gluster pool
Add support for a new <pool type='gluster'>, similar to
RBD and Sheepdog.  Terminology wise, a gluster volume
forms a libvirt storage pool, within the gluster volume,
individual files are treated as libvirt storage volumes.

* docs/schemas/storagepool.rng (poolgluster): New pool type.
* docs/formatstorage.html.in: Document gluster.
* docs/storage.html.in: Likewise, and contrast it with netfs.
* tests/storagepoolxml2xmlin/pool-gluster.xml: New test.
* tests/storagepoolxml2xmlout/pool-gluster.xml: Likewise.
* tests/storagepoolxml2xmltest.c (mymain): Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-25 11:03:19 -07:00
Eric Blake
887dd3625b storage: fix RNG validation of gluster via netfs
While trying to compare netfs against my new gluster pool, I
discovered two things:

virt-xml-validate chokes on valid xml produced by 'virsh pool-dumpxml'
[yet another reason that ALL patches that add new xml should be adding
corresponding tests]

When using glusterfs FUSE mounts, you cannot access a subdirectory
of a gluster volume.  The recommended workaround in the gluster
community is to mount the volume to an intermediate location, then
bind-mount the desired subdirectory to the final location.  Maybe
we should teach libvirt to do bind-mounting, but for now I chose to
just document the limitation.

* docs/storage.html.in: Improve documentation.
* docs/schemas/storagepool.rng (sourcefmtnetfs): Allow all
formats, and drop redundant info-vendor.
* tests/storagepoolxml2xmltest.c (mymain): New test.
* tests/storagepoolxml2xmlin/pool-netfs-gluster.xml: New file.
* tests/storagepoolxml2xmlout/pool-netfs-gluster.xml: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-11-13 12:10:00 -07:00
Eric Blake
caf516db51 storage: allow interleave in pool XML
The RNG grammar did not allow arbitrary interleaving, which makes
it harder than necessary to create a new pool from handwritten XML.

* docs/schemas/storagepool.rng: Allow interleaving.
* tests/storagepoolxml2xmlin/pool-sheepdog.xml: Test interleave.
* tests/storagepoolxml2xmlin/pool-iscsi-auth.xml: Likewise.

Signed-off-by: Eric Blake <eblake@redhat.com>
2013-10-16 10:15:44 -06:00
Martin Kletzander
efab27afbf Make logical pools independent on target path
When using logical pools, we had to trust the target->path provided.
This parameter, however, can be completely ommited and we can use
'/dev/<source.name>' safely and populate it to target.path.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=952973
2013-07-16 12:16:37 +02:00
John Ferlan
eb0d79c64b storage_pool: Rework chap XML to mimic ceph
The existing 'chap' XML logic was never used - just defined.  Rather than
try to insert a square peg into a round hole, blow it up and rewrite the
logic to follow the 'ceph' format.

Remove the former "chap.login" and "chap.passwd" fields and replace
with "chap.username" and "chap.secret" in _virStoragePoolAuthChap.
Adjust the virStoragePoolDefParseAuthChap() to process.

Change the rng file to describe the new layout

Update the formatstorage.html to describe the usage of the secret element
to mention that the secret type "iscsi" and "ceph" can be used
to storage pool too.

Update the formatsecret.html to include a reference to the storage pool

Update tests to handle the changes from 'login' and 'passwd' to 'username'
and '<secret>' format
2013-07-15 12:41:12 -04:00
Ján Tomko
a07b88ee03 schema: require target path in storage pool xml
Make target path mandatory for pool types that require target,
since we refuse to parse a target without a path.

https://bugzilla.redhat.com/show_bug.cgi?id=893273
2013-05-17 08:33:22 +02:00
Han Cheng
0f5837aac2 schemas: Move PortNumber and sourceinfoadapter to basictypes.rng
The definiton of scsi adapter in storagespool.rng (sourceinfoadapter)
can be used by scsi hostdev in later patch. Move it to basictypes.rng.

PortNumber is defined in both domaincommon.rng and storagespool.rng,
simplify it by moving it to basictypes.rng.

Signed-off-by: Han Cheng <hanc.fnst@cn.fujitsu.com>
2013-04-09 22:34:02 +08:00
Osier Yang
9f781da69d New XML attributes for storage pool source adapter
This introduces 4 new attributes for storage pool source adapter.
E.g.

<adapter type='fc_host' parent='scsi_host5' wwnn='20000000c9831b4b' wwpn='10000000c9831b4b'/>

Attribute 'type' can be either 'scsi_host' or 'fc_host', and defaults
to 'scsi_host' if attribute 'name' is specified. I.e. It's optional
for 'scsi_host' adapter, for back-compat reason. However, mandatory
for 'fc_host' adapter and any new future adapter types. Attribute
'parent' is to specify the parent for the fc_host adapter.

* docs/formatstorage.html.in:
  - Add documents for the 4 new attrs
* docs/schemas/storagepool.rng:
  - Add RNG schema
* src/conf/storage_conf.c:
  - Parse and format the new XMLs
* src/conf/storage_conf.h:
  - New struct virStoragePoolSourceAdapter, replace "char *adapter" with it;
  - New enum virStoragePoolSourceAdapterType
* src/libvirt_private.syms:
  - Export TypeToString and TypeFromString
* src/phyp/phyp_driver.c:
  - Replace "adapter" with "adapter.data.name", which is member of the union
    of the new struct virStoragePoolSourceAdapter now. Later patch will
    add the checking, as "adapter.data.name" is only valid for "scsi_host"
    adapter.
* src/storage/storage_backend_scsi.c:
  - Like above
* tests/storagepoolxml2xmlin/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlin/pool-scsi-type-fc-host.xml:
  - New test for 'fc_host' and "scsi_host" adapter
* tests/storagepoolxml2xmlout/pool-scsi.xml:
  - Change the expected output, as the 'type' defaults to 'scsi_host' if 'name"
    specified now
* tests/storagepoolxml2xmlout/pool-scsi-type-scsi-host.xml:
* tests/storagepoolxml2xmlout/pool-scsi-type-fc-host.xml:
  - New test
* tests/storagepoolxml2xmltest.c:
  - Include the test
2013-04-08 18:41:06 +08:00
Philipp Hahn
10219f2076 doc/schema: Support iqn for storage pools
iSCSI qualified names (iqn) from RFC3721 may contain colons (':'), which
neither matches the absFilePath nor genericName:

 $ virsh pool-dumpxml myiscsipool
 <pool type='iscsi'>
 ...
   <source>
 ...
     <device path='iqn.2003-01.org.linux-iscsi.phahn-sid93.x8664:sn.8a3daa0d4efd'/>
   </source>
 ...
 </pool>

Add IscsiQualifiedName type and allow its use in sourceiscsi.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2013-03-20 21:47:26 +08:00
Philipp Hahn
141deb9feb schema: Restrict mode to octal
virStrToLong(..., 8, ...) already requires the mode to be octal.
Change the relax-ng schema to check for octal as well.

Signed-off-by: Philipp Hahn <hahn@univention.de>
2013-02-26 16:23:21 -07:00
Osier Yang
c9d9cc5eae eng: Remove the duplicate definition
The RE for data type "name" storagepool.rng uses is same with
"genericName" in basictypes.rng.
2013-01-28 11:52:51 +08:00
Ján Tomko
37a10129c2 Update xml schemas according to libvirt source
capability.rng: Guest features can be in any order.
nodedev.rng: Added <driver> element, <capability> phys_function and
virt_functions for PCI devices.
storagepool.rng: Owner or group ID can be -1.

schema tests: New capabilities and nodedev files; changed owner and
group to -1 in pool-dir.xml.
storage_conf: Print uid_t and gid_t as signed to storage pool XML.
2012-08-02 14:36:23 -06:00
Sebastian Wiedenroth
29bc4fe646 Add a sheepdog backend for the storage driver
This patch brings support to manage sheepdog pools and volumes to libvirt.
It uses the "collie" command-line utility that comes with sheepdog for that.

A sheepdog pool in libvirt maps to a sheepdog cluster.
It needs a host and port to connect to, which in most cases
is just going to be the default of localhost on port 7000.

A sheepdog volume in libvirt maps to a sheepdog vdi.
To create one specify the pool, a name and the capacity.
Volumes can also be resized later.

In the volume XML the vdi name has to be put into the <target><path>.
To use the volume as a disk source for virtual machines specify
the vdi name as "name" attribute of the <source>.
The host and port information from the pool are specified inside the host tag.

  <disk type='network'>
    ...
    <source protocol="sheepdog" name="vdi_name">
      <host name="localhost" port="7000"/>
    </source>
  </disk>

To work right this patch parses the output of collie,
so it relies on the raw output option. There recently was a bug which caused
size information to be reported wrong. This is fixed upstream already and
will be in the next release.

Signed-off-by: Sebastian Wiedenroth <wiedi@frubar.net>
2012-07-18 20:08:27 +01:00
Wido den Hollander
74951eadef storage backend: Add RBD (RADOS Block Device) support
This patch adds support for a new storage backend with RBD support.

RBD is the RADOS Block Device and is part of the Ceph distributed storage
system.

It comes in two flavours: Qemu-RBD and Kernel RBD, this storage backend only
supports Qemu-RBD, thus limiting the use of this storage driver to Qemu only.

To function this backend relies on librbd and librados being present on the
local system.

The backend also supports Cephx authentication for safe authentication with
the Ceph cluster.

For storing credentials it uses the built-in secret mechanism of libvirt.

Signed-off-by: Wido den Hollander <wido@widodh.nl>
2012-05-21 12:37:38 -06:00
Eric Blake
265457845f xml: output memory unit for clarity
Make it obvious to 'dumpxml' readers what unit we are using,
since our default of KiB for memory (1024) differs from qemu's
default of MiB; and differs from our use of bytes for storage.

Tests were updated via:

$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(memory\|currentMemory\|hard_limit\|soft_limit\|min_guarantee\|swap_hard_limit\)>/<\1 unit='"'KiB'>/"
$ find tests/*data tests/*out -name '*.xml' | \
  xargs sed -i 's/<\(capacity\|allocation\|available\)>/<\1 unit='"'bytes'>/"

followed by a few fixes for the stragglers.

Note that with this patch, the RNG for <memory> still forbids
validation of anything except unit='KiB', since the code silently
ignores the attribute; a later patch will expand <memory> to allow
scaled input in the code and update the RNG to match.

* docs/schemas/basictypes.rng (unit): Add 'bytes'.
(scaledInteger): New define.
* docs/schemas/storagevol.rng (sizing): Use it.
* docs/schemas/storagepool.rng (sizing): Likewise.
* docs/schemas/domaincommon.rng (memoryKBElement): New define; use
for memory elements.
* src/conf/storage_conf.c (virStoragePoolDefFormat)
(virStorageVolDefFormat): Likewise.
* src/conf/domain_conf.h (_virDomainDef): Document unit used
internally.
* src/conf/storage_conf.h (_virStoragePoolDef, _virStorageVolDef):
Likewise.
* tests/*data/*.xml: Update all tests.
* tests/*out/*.xml: Likewise.
* tests/define-dev-segfault: Likewise.
* tests/openvzutilstest.c (testReadNetworkConf): Likewise.
* tests/qemuargv2xmltest.c (blankProblemElements): Likewise.
2012-03-07 18:24:43 -07:00
Eric Blake
cb7583e161 xml: share 'unit' in RNG
The code supported unit='E' for "exabyte", but the RNG did not;
conversely, the RNG supported "z" and "y" but the code did not
(I'm jealous if you have that much storage, particularly since
it won't fit in 64-bit off_t).  Also, the code supported
<allocation unit='...'>, but not the RNG.

In an effort to make 'unit' more worthwhile in future patches,
it's easier to share it between files.

In making this factorization, note that absFilePath is more
permissive than 'path', so storage pools and storage volumes
will now validate with a wider set of file names than before.
I don't think this should be a problem in practice.

* docs/schemas/storagepool.rng: Include basic types, rather than
repeating things here.
* docs/schemas/storagevol.rng: Likewise.
* docs/schemas/basictypes.rng: Add 'unsignedLong', 'unit', and fix
to match storage code.
2012-03-07 18:24:43 -07:00
Daniel P. Berrange
b6e5a0a26e Fix parsing of port attribute in storage XML configuration
The XML docs describe a 'port' attribute for the
storage source <host> element, but the parser never
handled it.

* docs/schemas/storagepool.rng: Define port attribute
* src/conf/storage_conf.c: Add missing parsing/formatting
  of host port number
* src/conf/storage_conf.h: Remove bogus/unused 'protocol' field
2010-11-23 14:55:33 +00:00
Patrick Dignan
20be699ee3 storage: add support for Vendor and Model in XML
I wrote a patch to add support for listing the Vendor and Model of a
storage pool in the storage pool XML.  This would allow vendor
extensions of specific devices.  The patch includes a test for the new
attributes as well.

Patrick Dignan
2010-08-19 15:58:43 -06:00
David Allan
77da2487ea Add multiIQN tests
* Fix broken rng schema
* Add test input & output files
2010-06-08 13:14:26 -04:00
Jim Meyering
aa7847d3ad maint: convert leading TABs in *.rng files to equivalent spaces
* docs/schemas/capability.rng: Likewise.
* docs/schemas/network.rng: Likewise.
* docs/schemas/nodedev.rng: Likewise.
* docs/schemas/storagepool.rng: Likewise.
* docs/schemas/storagevol.rng: Likewise.
Use these commands:
t=$'\t'
git ls-files | grep '\.rng$' | xargs grep -lE "^ *$t" \
  | xargs perl -MText::Tabs -ni -le \
    '$m=/^( *\t[ \t]*)(.*)/; print $m ? expand($1) . $2 : $_'
2010-03-01 20:19:20 +01:00
David Allan
6aabcb5bd8 Implement support for multi IQN
Allows the initiator to use a variety of IQNs rather than just the
system IQN when creating iSCSI pools.
* docs/schemas/storagepool.rng: extends the syntax with <iqn name="..."/>
* src/conf/storage_conf.[ch]: read and stores the iqn name
* src/storage/storage_backend_iscsi.[ch]: implement the IQN selection
  when detected
2010-01-21 12:50:52 +01:00
Jim Fehlig
e391595890 Add ocfs2 to list of fs pool types
* src/conf/storage_conf.c src/conf/storage_conf.h: extend the enums
  and values
* docs/schemas/storagepool.rng: add to the list of storage pool type
  formats
2009-10-14 17:03:22 +02:00
Cole Robinson
be2cd079af schema: Update storage pool schema.
- mpath pools weren't listed
- scsi pools were missing an adapter section
- iscsi pools were missing an auth section
- Logical pools do not require a source name to be specified
2009-10-13 10:56:43 -04:00
Aron Griffis
3879b33447 Typo and comment fixes
* docs/schemas/*.rng: the comments were wrong
* src/qemu_conf.c: typo in an error message
2009-08-05 11:56:56 +02:00
Daniel P. Berrange
2c22a68ce2 Added complete set of RNG schemas for all XML formats 2009-01-27 15:29:53 +00:00