FreeBSD's sed(1) doesn't support using "\n" to insert a newline,
so the installed default.xml file ends up containing a literal
"n" between tags; to work around this problem, add a tr(1)
invocation as suggested by the sed FAQ[1].
[1] http://sed.sourceforge.net/sedfaq4.html (4.1 c)
The stream serial number is the serial number of the RPC call
that initiated a data transfer. And as such can never be
negative. Moreover, when looking up internal state for a stream,
the serial numbers are compared. But hey, the serial number in
message header is unsigned too!
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
According to the autoconf manual, using '$(LN_S) -f' is not
portable; remove the target explicitly beforehand to work around
this limitation.
Adjust some slightly awkward indentation while at it.
My commit 0d1579572 crashes on a URI without a scheme, like via
'virsh --connect frob'
Add a check on uri->server too while we are at it, and centralize
them all
The current rule fails if the target already exists:
cd /home/jenkins/build/libvirt/lib && \
ln -s libnss_libvirt.so.1 nss_libvirt.so.1
ln: nss_libvirt.so.1: File exists
Makefile:3357: recipe for target 'install-exec-hook' failed
However, all other rules concerned with installation are
idempotent and will happily overwrite an existing target,
so this one should as well.
We don't have input devices in SDK thus for define/dumpxml
operations to be consistent we need to:
1. on dumpxml: infer input devices from other parts of config.
It is already done in prlsdkLoadDomain.
2. on define: check that input devices are the same that
will be infer back on dumpxml operation.
The second part should be fixed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Remove all the plumbing needed for the different qcow-create/kvm-img
non-raw file creation.
We can drop the error messages because CreateQemuImg will thrown an
error for us but with slightly less fidelity (unable to find qemu-img),
which I think is acceptable given the unlikeliness of that error in
practice.
This an ubuntu/debian packaging convention. At one point it may have
been an actually different binary, but at least as of ubuntu precise
(the oldest supported ubuntu distro, released april 2012) kvm-img is
just a symlink to qemu-img for back compat.
I think it's safe to drop support for it
qcow-create was a crippled qemu-img impl that shipped with xen. I
think supporting this was only relevant for really old distros
that didn't have a proper qemu package, like early RHEL5. I think
it's fair to drop support
VIR_ERR_NO_SUPPORT maps to the error string
this function is not supported by the connection driver
and is largely only used for when a driver doesn't have any
implementation for a public API. So its usage with invalid
net-update requests is a bit out of place. Instead use
VIR_ERR_OPERATION_UNSUPPORTED which maps to:
Operation not supported
And is what qemu's hotplug routines use in similar scenarios
QEMU introduced the query-gic-capabilities QMP command
with commit 4468d4e0f383: use the command, if available,
to probe available GIC capabilities.
The information obtained is stored in a virQEMUCaps
instance, and will be later used to fill in a
virDomainCaps instance.
The struct contains a single boolean field, 'supported':
the meaning of this field is too generic to be limited to
devices only, and in fact it's already being used for
other things like loaders and OSs.
Instead of trying to come up with a more generic name just
get rid of the struct altogether.
libvirt handles empty source as NULL, while vz sdk as
"" thus we need a bit of conversion.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Current implementation does not detect all incompatible configurations.
For example if we have in vzsdk bootorder "cdrom1, cdrom0" (that is
"hdb, hda" in case of ide cdroms) and cdroms do not have disk
images inserted. In this case boot order check code fails to
distiguish them at all as for both PrlVmDev_GetFriendlyName gives "".
Well the consequences are only missing warnings but as
we just have introduced all the necessary tools to face the problem -
let's fix it.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Actually using disk PrlVmDev_GetFriendlyName as id on
detaching volumes is not a problem. We can only detach
hard disks and these can not have empty friendly names.
But upcoming update device functionality for cdroms
can not use disk source as id at all as update operation
typically change this same source value. Thus we will need
to use cdrom bus and cdrom target name as cdrom id. So in attempt
to use same id scheme for all purpuses lets fix hard disk
detach function to use new id.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Our intention is to use disk bus and disk target name pair
as disk id instead of name returned by PrlVmDev_GetFriendlyName.
We already have the code that extracts this pair from vzsdk
data. Let's factor it out into a function.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Prior to this patch we didn't make any attempt to prevent two entries
in the array of interfaces/PCI devices from pointing to the same
device.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1002423
The common idiom in the driver API implementations is roughly:
- ACL check
- BeginJob (if needed)
- AgentAvailable (if needed)
- !IsActive
A few calls had an extra !IsActive before BeginJob, which doesn't
seem to serve much use. Drop them
It isn't implemented and does not work:
error: internal error: guest failed to start: /usr/lib/libvirt/libvirt_lxc: option '--veth' requires an argument
syntax: /usr/lib/libvirt/libvirt_lxc [OPTIONS] ...
We previously threw an explicit error, but this changed in
22cff52a2b8e06c913b1f97767e5d390fb17fc3b , which I suspect was
untested for LXC
So in glibc-2.23 sys/sysmacros.h is no longer included from sys/types.h
and we don't build because of the usage of major/minor/makedev macros.
Autoconf already has AC_HEADER_MAJOR macro that check where exactly
these functions/macros are defined, so let's use that.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
These API already support VIR_DOMAIN_AFFECT_* flags. But the
documentation does not mention it. Eww.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Since threadpool increments the current number of threads according to current
load, i.e. how many jobs are waiting in the queue. The count however, is
constrained by max and min limits of workers. The logic of this new API works
like this:
1) setting the minimum
a) When the limit is increased, depending on the current number of
threads, new threads are possibly spawned if the current number of
threads is less than the new minimum limit
b) Decreasing the minimum limit has no possible effect on the current
number of threads
2) setting the maximum
a) Icreasing the maximum limit has no immediate effect on the current
number of threads, it only allows the threadpool to spawn more
threads when new jobs, that would otherwise end up queued, arrive.
b) Decreasing the maximum limit may affect the current number of
threads, if the current number of threads is less than the new
maximum limit. Since there may be some ongoing time-consuming jobs
that would effectively block this API from killing any threads.
Therefore, this API is asynchronous with best-effort execution,
i.e. the necessary number of workers will be terminated once they
finish their previous job, unless other workers had already
terminated, decreasing the limit to the requested value.
3) setting priority workers
- both increase and decrease in count of these workers have an
immediate impact on the current number of workers, new ones will be
spawned or some of them get terminated respectively.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
New API to retrieve current server workerpool specs. Since it uses typed
parameters, more specs to retrieve can be further included in the pool of
supported ones.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
