Currently we set the gnutls log function when creating a
TLS context, however, the setting is in fact global, not
per context. So we should be setting it when we first call
gnutls_global_init() instead.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
We need to use the gnutls_priority_set_direct method which
was not introduced until 2.1.7, so bump version to 2.2.0
which is the first stable release with it included. This
release dates from Dec 2007 so it is reasonable to ditch
support for the 1.x.x series for gnutls releases entirely.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
In commit 1e38ef72 the disk startup policy check was moved prior to the
call to virDomainObjSetDefTransient which dropped the disk from the
config rather than the def to be started which is a bug.
Additionally we'd not report the disk change event for this since the
disk aliases were not set at that point.
Finally 'volume' based disks would not work with startup policy too.
Fix it by moving it back after the definition is copied, aliases are
assigned and disk sources are translated.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1341415
qemuProcessStart does not unset the infrastructure that retrieves errors
from the qemu log file in case of migration. As this wasn't handled
properly in qemuDomainSaveImageStartVM we kept the logging context/fd
open for the lifetime of the VM rather than closing it after it's not
needed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1325080
tap2 only handles 'aio', but not 'raw', which must be explicitly given:
| $ virsh domxml-to-native yyy.xml > yyy.xm
| $ xm new yyy.xm
| Error: tap:/srv/xen/xxx.img not a valid disk type
| $ sed -i -e 's/tap2:/&aio:/' yyy.xm
| $ xm new yyy.xm
Fix reading and writing "xen-xm" format for "tap2" by handling it the
same as "tap".
Use qemuDomainLogAppendMessage rather than attempting to open a new
logging context with file descriptors. The new approach allows to log
the message even if qemu is still running at that point which appens
during migration finish phase where qemuProcessStop is killing qemu.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1312188
Along with the virtlogd addition of the log file appending API implement
a helper for logging one-shot entries to the log file including the
fallback approach of using direct file access.
This will be used for noting the shutdown of the qemu proces and
possibly other actions such as VM migration and other critical VM
lifecycle events.
For logging one-shot entries to the VM log file it's quite a waste to
hold open the file descriptor for logging that is provided by the
current API.
This new API will be ideal for logging one-shot entries to the file
e.g. at the point when we shut the VM down rather than having to add the
whole file-descriptor infrastructure.
Additionally this will allow to add the messages even after restart of
libvirtd since virtlogd doesn't allow to obtain a regular context with
filedescriptors while the VM is still active.
Since it will not be called from outside of conf we can unexport it too
if we move it to the appropriate place.
Test suite change is necessary since the error will be reported sooner
now.
Validation of qemu process startup requires to know whether the process
is used for a fresh VM or whether it's reloaded from a
snapshot/migration. Pass this information in via a flag rather than
calculating it from a bunch of bools.
Similarly to the domain definition validator add a device validator. The
change to the prototype of the domain validator is necessary as
virDomainDeviceInfoIterateInternal requires a non-const pointer.
Until now we weren't able to add checks that would reject configuration
once accepted by the parser. This patch adds a new callback and
infrastructure to add such checks. In this patch all the places where
rejecting a now-invalid configuration wouldn't be a good idea are marked
with a new parser flag.
Historically, we added heads=1 to videos, but for example for qxl, we
did not reflect that on the command line.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1283207
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Use udevHasDeviceProperty instead of udevGetStringProperty.
We do not need to copy the string since we do not need it.
Also add braces around the if body, since the change made
syntax check complain.
Two out of three callers free it right after converting it to a number.
Also change the comment at the beginning of the function, because
the comment inside the function told me to.
The wrapper adds an error message or a debug log.
Since we already log the properties we get from udev as strings,
there is no much use for the debug logs.
Open code the error message and delete the function.
Most of the code paths had to reset it to -1 and returning 0 was
only possible if we made it to the end of the function.
Initialize it to -1 and only set it to 0 if we reach the end, as we do
in most of libvirt code.
The sd_notify method is used to tell systemd when libvirtd
has finished starting up. All it does is send a datagram
containing the string parameter to systemd on a UNIX socket
named in the NOTIFY_SOCKET environment variable. Rather than
pulling in the systemd libraries for this, just code the
notification directly in libvirt as this is a stable ABI
from systemd's POV which explicitly allows independant
implementations:
See "Reimplementable Independently" column in the
"$NOTIFY_SOCKET Daemon Notifications" row:
https://www.freedesktop.org/wiki/Software/systemd/InterfacePortabilityAndStabilityChart/
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1314881
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Move the module from qemu_command.c to a new module virqemu.c and
rename the API to virQEMUBuildObjectCommandline.
This API will then be shareable with qemu-img and the need to build
a security object for luks support.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Split out a helper from virStorageBackendCreateQemuImgCmdFromVol
to check the encryption - soon a new encryption sheriff will be
patroling and that'll mean all sorts of new checks.
Signed-off-by: John Ferlan <jferlan@redhat.com>
Remove the live attribute and mark the definition as transient
whether the domain is runing or not.
There were only two callers left calling with live=false:
* testDomainStartState, where the domain already is active
because we assigned vm->def->id just a few lines above the call
* virDomainObjGetPersistentDef, which now only calls
virDomainObjSetDefTransient for an active domain
Calling virDomainObjSetDefTransient with live=false is a no-op
on an inactive domain.
Only call it on an active domain, since this is the only place using
the live bool.
Commit 45ec297d from November 2010:
Make state driver device hotplug/update actually transient
added virDomainObjSetDefTransient calls to the domain startup
function in several drivers.
In November 2011, commit 8866eed:
Set aliases for LXC/UML console devices
added a call earlier in the startup function, without removing the
existing ones.
Also, in the UML driver it seems the function never did anything
useful - vm->def->id is set asynchronnously in umlNotifyEvent.
At the time of calling virDomainObjSetDefTransient with live=false,
vm->def->id was likely still -1, making the call a no-op.
When building using -Og, gcc sees that some variables can be used
uninitialized It can be debatable whether it is possible with our
codeflow, but functions should be self-contained and initializations are
always good. The return instead of goto is due to actualType being used
in the cleanup.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
So imagine the following. You connect read only to a daemon and
try to fetch stats for a shut off domain, e.g.:
virsh -r domstats $dom
but all of a sudden, virsh instead of printing the stats throws
the following error at you:
error: Disconnected from qemu:///system due to I/O error
error: End of file while reading data: Input/output error
The daemon crashed. This is its backtrace:
#0 0x00007fa43e3751a8 in virPerfEventIsEnabled (perf=0x0, type=VIR_PERF_EVENT_MBMT) at util/virperf.c:241
#1 0x00007fa424a9f042 in qemuDomainGetStatsPerf (driver=0x7fa3f4022a30, dom=0x7fa3f40e24c0, record=0x7fa41c000e20, maxparams=0x7fa4360b38d0, privflags=1) at qemu/qemu_driver.c:19110
#2 0x00007fa424a9f2e7 in qemuDomainGetStats (conn=0x7fa41c001b20, dom=0x7fa3f40e24c0, stats=127, record=0x7fa4360b3970, flags=1) at qemu/qemu_driver.c:19213
#3 0x00007fa424a9f672 in qemuConnectGetAllDomainStats (conn=0x7fa41c001b20, doms=0x7fa41c0017f0, ndoms=1, stats=127, retStats=0x7fa4360b3a50, flags=0) at qemu/qemu_driver.c:19303
#4 0x00007fa43e4e15f6 in virDomainListGetStats (doms=0x7fa41c0017f0, stats=0, retStats=0x7fa4360b3a50, flags=0) at libvirt-domain.c:11615
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7f28d1a38700 (LWP 16154)]
0x00007f28da4fa1a8 in virPerfEventIsEnabled (perf=0x0, type=VIR_PERF_EVENT_MBMT) at util/virperf.c:241
241 return event->enabled;
Problem is, shut off domains don't have priv->perf allocated.
Therefore if in frame #1 qemuDomainGetStatsPerf() tries to check
if perf events are enabled, NULL is passed to
virPerfEventIsEnabled() which due to some incredible
implementation dereference it. Fix this by checking whether
passed object is not NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
This function is not used anywhere. Moreover, the code that would
use lives in virperf.c and therefore has access to the FD anyway.
Well, for instance virPerfReadEvent is doing just that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's this problem on the recent gcc-6.1:
In file included from conf/domain_conf.c:37:0:
conf/domain_conf.c: In function 'virDomainChrPreAlloc':
conf/domain_conf.c:14109:35: error: potential null pointer dereference [-Werror=null-dereference]
return VIR_REALLOC_N(*arrPtr, *cntPtr + 1);
^~
./util/viralloc.h:158:73: note: in definition of macro 'VIR_REALLOC_N'
# define VIR_REALLOC_N(ptr, count) virReallocN(&(ptr), sizeof(*(ptr)), (count), \
^~~~~
conf/domain_conf.c: In function 'virDomainChrRemove':
conf/domain_conf.c:14133:21: error: potential null pointer dereference [-Werror=null-dereference]
for (i = 0; i < *cntPtr; i++) {
^~~~~~~
GCC basically fails to see, that the
virDomainChrGetDomainPtrsInternal will never actually return NULL
because it's never called over a domain char device with _LAST
type. But to make it shut up, lets turn this function into
returning an integer and check in the callers if a zero value
value was returned.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Okay, I admit that our code here is complex. It's not easy to
spot that NULL deref can't really happen here. So it's no wonder
that a dumb compiler fails to see all the connections and
produces the following errors:
CC conf/libvirt_conf_la-domain_conf.lo
conf/domain_conf.c: In function 'virDomainDefFormatInternal':
conf/domain_conf.c:22162:22: error: potential null pointer dereference [-Werror=null-dereference]
if (sched->policy == i)
~~~~~^~~~~~~~
<snip/>
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
cpu/cpu_ppc64.c: In function 'ppc64Compute':
cpu/cpu_ppc64.c:620:27: error: potential null pointer dereference [-Werror=null-dereference]
if (STRNEQ(guest_model->name, host_model->name)) {
~~~~~~~~~~~^~~
cpu/cpu_ppc64.c:620:9: note: in expansion of macro 'STRNEQ'
if (STRNEQ(guest_model->name, host_model->name)) {
^~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So far, this function has just three callers. Two of them call
virNetDevSetupControl to create a socket that we can then
optionally use for ioctl() to fetch data. However, querying sysfs
is preferred. Therefore it doesn't make much sense to require
users to set up the socket if they don't even know it will be
used in favour of sysfs. We can set up the socket iff we need to.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Although dns host records are stored in a separate configuration file
that is reread by dnsmasq when it receives a SIGHUP, the txt and srv
records are directly in the dnsmasq .conf file which can't be reread
after initial dnsmasq startup. This means that if an srv or txt record
is modified in a network config, libvirt needs to restart the dnsmasq
process rather than just sending a SIGHUP.
This was pointed out in a question in
https://bugzilla.redhat.com/show_bug.cgi?id=988718 , but no separate
BZ was filed.
Commit b4a5fd95 introduced vram64 attribute for QXL video device but
there were two issues. Only function
qemuMonitorJSONUpdateVideoVram64Size should update the vram64 attribute
and also the value is in MiB, not in B.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
So the idea is as follows: firstly we obtain a list of all the
luns, then iterate over it trying to find the one we want to work
with and after all the iterations we detect whether we have found
something. Now, the last check is broken, because it compares a
value form previous iteration, not the one we've just been
through.
Then, when computing md5 sum of lun's UUID, we use wrong variable
again. Well, @hostScsiDisk which is type of esxVI_HostScsiDisk
extends esxVI_ScsiLun type so they both have the uuid member, but
it just doesn't feel right to access the data via two different
variables in one function call.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
There's a bug in the function. We expect the following format for
the data we are parsing here:
key: value
So we use strchr() to find ':' and then see if it is followed by
space. But the check that does just that is slightly incorrect.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Yet another one of those where signed int (or long int) is not
enough. And useless to as we're aiming at unsigned anyway.
../../src/util/virsocketaddr.c: In function 'virSocketAddrIsPrivate':
../../src/util/virsocketaddr.c:289:45: error: result of '192l << 24' requires 33 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=]
return ((val & 0xFFFF0000) == ((192L << 24) + (168 << 16)) ||
^~
../../src/util/virsocketaddr.c:290:45: error: result of '172l << 24' requires 33 bits to represent, but 'long int' only has 32 bits [-Werror=shift-overflow=]
(val & 0xFFF00000) == ((172L << 24) + (16 << 16)) ||
^~
cc1: all warnings being treated as errors
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Apparently, 1 << 31 is signed which in turn does not fit into
a signed integer variable:
../../include/libvirt/libvirt-domain.h:1881:57: error: result of '1 << 31' requires 33 bits to represent, but 'int' only has 32 bits [-Werror=shift-overflow=]
VIR_CONNECT_GET_ALL_DOMAINS_STATS_ENFORCE_STATS = 1 << 31, /* enforce requested stats */
^~
cc1: all warnings being treated as errors
The solution is to make it an unsigned value. I've found only two
such occurrences in our code base.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Adjust the code to perform the virLXCDomainObjBeginJob first
and then the call virDomainLiveConfigHelperMethod.
As Ján Tomko pointed out, in virDomainLiveConfigHelperMethod,
there is a check to see if the domain is active when AFFECT_LIVE is set.
Since virLXCDomainObjBeginJob unlocks the virDomainObjPtr lock,
the domain could possibly be destroyed while we wait for the job
and the check results would no longer be valid.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
This patch fixes an issue where screenshot API call was failing when
the esx/vcenter password contains special characters such as
apostrophee. The reason for failures was that passwords were escaped
for XML and stored in esxVI_Context which was then passed to raw CURL
API calls where the password must be passed in original form to
authenticate successfully. So this patch addresses this by storing
original passwords in the esxVI_Context struct and escape only for
esxVI_Login call.
Commit ff2126225d changed the error message to be more
detailed about the failure at hand; however, while the new
error message claims that "bus must be <= index", the error
message is displayed if "idx <= addr->bus", ie. when bus
is larger than or *equal to* index.
Change the error message to report the correct constraint,
and format it in a way that mirrors the check exactly to
make it clearer to people reading the code. The new error
message reads "index must be larger than bus".
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1339900
This patch aims to fix observed crash on daemon shutdown. Main thread is in
the process of state drivers cleanup, network driver is cleaned up and
qemu driver is not yet. Meanwhile eof event from qemu process triggers
qemuProcessStop -> networkReleaseActualDevice and crash happens as
network driver is already cleaned up.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
When a SCSI controller is present, ESX adds several pciBridge devices
to vmx file. This fixes an error message where it refuses to create VM
due to not enough PCI devices available. This applies only to virtualHW
version >= 7.
Hand-entering indexes for 20 PCI controllers is not as tedious as
manually determining and entering their PCI addresses, but it's still
annoying, and the algorithm for determining the proper index is
incredibly simple (in all cases except one) - just pick the lowest
unused index.
The one exception is USB2 controllers because multiple controllers in
the same group have the same index. For these we look to see if 1) the
most recently added USB controller is also a USB2 controller, and 2)
the group *that* controller belongs to doesn't yet have a controller
of the exact model we're just now adding - if both are true, the new
controller gets the same index, but in all other cases we just assign
the lowest unused index.
With this patch in place and combined with the automatic PCI address
assignment, we can define a PCIe switch with several ports like this:
<controller type='pci' model='pcie-root-port'/>
<controller type='pci' model='pcie-switch-upstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
<controller type='pci' model='pcie-switch-downstream-port'/>
...
These will each get a unique index, and PCI addresses that connect
them together appropriately with no pesky numbers required.
Make virDomainControllerFindUnusedIndex() a global function so that it
can be used outside domain_conf.c (as well as higher up in
domain_conf.c itself)/ Also make its DomainDef arg a const* so that
functions which only have a const* to the domain can use it.
IS_USB2_CONTROLLER() is useful in more places aside from just when
assigning PCI addresses in QEMU, and is checking for enum values that
are all defined in conf/domain_conf.h anyway, so define it there
instead.
Add .domainInterfaceAddresses so that user can have a way to
get domain interface address by 'virsh domifaddr'. Currently
it only supports '--source lease'.
Signed-off: Chunyan Liu <cyliu@suse.com>
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
will result in:
-acpitable sig=SLIC,file=/path/to/acpi/table/file
This option was introduced by QEMU commit 8a92ea2 in 2009.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
Add a new element to <domain> XML:
<os>
<acpi>
<table type="slic">/path/to/acpi/table/file</table>
</acpi>
</os>
To supply a path to a SLIC (Software Licensing) ACPI
table blob.
https://bugzilla.redhat.com/show_bug.cgi?id=1327537
Xen only supports network-based disks with the qemu (aka qdisk) driver.
Set the driverName to 'qemu' in libxlDomainDeviceDefPostParse() if
not already set. When starting a domain with network-based disks,
ensure the driverName is 'qemu'.
Resolves: https://bugzilla.opensuse.org/show_bug.cgi?id=981094
The libvirt internal bits can be changed for disks that don't otherwise
support changing media. Remove the switch statement and allow changes of
non-source data for all disks.
qemuDomainChangeDiskLive rolled back few changes to the disk definition
if changing of the media failed. This can be avoided by moving some code
around.
Commit id '15ccb0dbf' added job functions for the lxc driver; however,
for shutdown and nonpersistent path, the vm was removed from the domain
object list and the vm pointer cleared before the endjob.
Adjust the code to perform the endjob first and then perform the
ObjListRemove as long as the vm wasn't NULL. This follows more closely
models from qemu and libxl
Found by Coverity (FORWARD_NULL)
Based on some digital archaeology performed by jtomko, it's been determined
that the persistentAddrs variable is no longer necessary...
The variable was added by:
commit 141dea6bc7
CommitDate: 2010-02-12 17:25:52 +0000
Add persistence of PCI addresses to QEMU
Where it was set to 0 on domain startup if qemu did not support the
QEMUD_CMD_FLAG_DEVICE capability, to clear the addresses at shutdown,
because QEMU might make up different ones next time.
As of commit f5dd58a608
CommitDate: 2012-07-11 11:19:05 +0200
qemu: Extended qemuDomainAssignAddresses to be callable from
everywhere.
this was broken, when the persistentAddrs = 0 assignment was moved
inside qemuDomainAssignPCIAddresses and while it pretends to check
for !QEMU_CAPS_DEVICE, its parent qemuDomainAssignAddresses is only
called if QEMU_CAPS_DEVICE is present.
Since commit id '20a0fa8e' removed the QEMU_CAPS_DEVICE, Coverity notes
that it's no longer possible to have 'addrs' be NULL when checking for
a live domain since qemuDomainPCIAddressSetCreate would have jumped to
cleanup if addrs was NULL.
Instead of setting the flag before parsing the PCI address, set
it afterwards. This ensure we can never end up in a situation
where the flag has been set but pci_dev.physical_function has
not been filled in.
Commit c8b1a83605 changed the function, making it
impossible for callers to be able to tell whether a
non-negative return value means "physical function
address found and parsed correctly" or "couldn't find
corresponding physical function".
The important difference between the two being that,
in the latter case, the returned pointer is NULL and
should never, ever be dereferenced.
In order to cope with these changes, the callers
have to be updated.
Use the detected tray presence flag to trigger the tray waiting code
only if the given storage device in qemu reports to have a tray.
This is necessary as the floppy device lost it's tray as of qemu commit:
commit abb3e55b5b718d6392441f56ba0729a62105ac56
Author: Max Reitz <mreitz@redhat.com>
Date: Fri Jan 29 20:49:12 2016 +0100
Revert "hw/block/fdc: Implement tray status"
Commit 1fad65d49a used a really big hammer
and overwrote the error message that might be reported by qemu if the
tray is locked. Fix it by reporting the error only if no error is
currently set.
Error after commit mentioned above:
error: internal error: timed out waiting for disk tray status update
New error:
error: internal error: unable to execute QEMU command 'eject': Tray of
device 'drive-ide0-0-0' is not open
Extract information for all disks and update tray state and source only
for removable drives. Additionally store whether a drive is removable
and whether it has a tray.
Extract whether a given drive has a tray and whether there is no image
inserted.
Negative logic for the image insertion is chosen so that the flag is set
only if we are certain of the fact.
When reviewing libxl vif typename series[0] I found a bug
on xen-xm formatter where "virsh domxml-to-native xen-xm file.xml"
can lead to a NULL dereference if the disk driver isn't specified.
Fix this by checking for driver before writing/testing it down.
[0] https://www.redhat.com/archives/libvir-list/2016-April/msg01434.html
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
This is identical to type='bridge', but without the "connect to a
bridge" part, so it can be handled by using the same functions (and
often even the same cases in switch statements), after renaming
virLXCProcessSetupInterfaceBridged() to virLXCProcessInterfaceTap()
and enhancing it to skip bridge-related items when brname == NULL.
To be truly useful, we need to support setting the ip address on the
host side veth as well as guest side veth (already supported for
type='bridge'), as well as setting the peer address for both.
The <script> element (supported by type='ethernet' in qemu) isn't
supported in this patch. An error is logged at domain start time if it
is encountered. This may be changed in a later patch.
This patch follows the pattern used in qemu driver regarding
reference counting.
It changes lxcDomObjFromDomain() to ref the domain (using
virDomainObjListFindByUUIDRef()) and adds virDomainObjEndAPI() which
should be the only function in which the return value of
virObjectUnref() is checked. This makes all reference counting
deterministic and makes the code a bit clearer.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Below is backtraces of two deadlocked threads:
thread #1:
virDomainConfVMNWFilterTeardown
virNWFilterTeardownFilter
lock updateMutex <------------
_virNWFilterTeardownFilter
try to lock interface <----------
thread #2:
learnIPAddressThread
lock interface <-------
virNWFilterInstantiateFilterLate
try to lock updateMutex <----------
The problem is fixed by unlocking interface before calling
virNWFilterInstantiateFilterLate to avoid updateMutex and interface ordering
deadlocks. Otherwise we are going to instantiate the filter while holding
interface lock, which will try to lock updateMutex, and if some other thread
instantiating a filter in parallel is holding updateMutex and is trying to
lock interface, both will deadlock.
Also it is safe to unlock interface before virNWFilterInstantiateFilterLate
because learnIPAddressThread stopped capturing packets and applied necessary
rules on the interface, while instantiating a new filter doesn't require a
locked interface.
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
We need to append GNUTLS_CFLAGS while building utils because virtcrypto
is using it. This fixes build on freebsd where gnutuls is in
/usr/local/include.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
If try to stop VM or container which is already stopped than
Virtuozzo 7 returns code PRL_ERR_INVALID_ACTION_REQUESTED.
Error code PRL_ERR_DISP_VM_IS_NOT_STARTED is used in Virtuozzo 6
Commit 5e54361c added virStoragePoolObjClearVols before refreshPool
to prevent duplicate volume entries.
However it is not needed here because we're not refreshing the pool yet,
just checking for the existence of the refresh callback.
The actual refresh is done via virStorageVolFDStreamCloseCb
in virStorageVolPoolRefreshThread, which already calls
virStoragePoolObjClearVols.
Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address (virDeviceInfoPCIAddressWanted()).
There are also several places after parsing but prior to address
assignment where code previously expected that any info with address
type='pci' would have a *valid* PCI address, which isn't always the
case - now we check not only for type='pci', but also for a valid
address (virDeviceInfoPCIAddressPresent()).
The test case added in this patch was directly copied from Cole's patch titled:
qemu: Wire up address type=pci auto_allocate
Rather than only assigning a PCI address when no address is given at
all, also do it when the config says that the address type is 'pci',
but it gives no address.
Prior to this, <address type='pci'/> wasn't allowed when parsing
(domain+bus+slot+function needed to be a "valid" PCI address, meaning
that at least one of domain/bus/slot had to be non-0), the RNG
required bus to be specified, and if type was set to PCI when
formatting, domain+bus+slot+function would always be output.
This makes all the address attributes optional during parse and RNG
validation, and suppresses domain+bus+slot+function if domain+bus+slot
are all 0 (NB: if d+b+s are all 0, any value for function is
nonsensical as that will never happen in the real world, and after
the next patch we will always assign a real working address to any
empty PCI address before it is ever output to anywhere).
Note that explicitly setting all attributes to 0 is equivalent to
setting none of them, which is okay, since 0000:00:00 is reserved in
any PCI bus setup, and can't be used anyway.
In order to allow <address type='pci'/> with no other attributes to
mean "I want a PCI address, but any PCI address will do" (just as
having no <address> at all usually indicates), we will need to change
several places in the code from a simple "info->type == (or !=)
VIR_DOMAIN_DEVICE_ADDRESS_TYPE_(PCI|NONE)" into something slightly
more complex, this patch adds to new functions that take a
virDomainDeviceInfoPtr and return true/false depending on 1) whether
the current state of the info indicates that we "want" a PCI address
for this device (virDeviceInfoPCIAddressWanted()) and 2) whether this
device already has a valid PCI address
(virDeviceInfoPCIAddressPresent()).
Both of these functions required the simpler check for whether a pci
address is "empty" (i.e. all of its attributes are 0, which can never
happen in a real PCI address, since slot 0 of bus 0 of domain 0 is
always reserved), so that function is also added.
Also moves all the subordinate structs. This is necessary due to a new
inline function that will be defined in device_conf.h, and also makes
sense, because it is the *device* info that's in the struct. (Actually
a lot more stuff from domain_conf.h could move to this newer file, but
I didn't want to disturb any more than necessary).
https://bugzilla.redhat.com/show_bug.cgi?id=1182074
If they're available and we need to pass secrets to qemu, then use the
qemu domain secret object in order to pass the secrets for RBD volumes
instead of passing the base64 encoded secret on the command line.
The goal is to make AES secrets the default and have no user interaction
required in order to allow using the AES mechanism. If the mechanism
is not available, then fall back to the current plain mechanism using
a base64 encoded secret.
New APIs:
qemu_domain.c:
qemuDomainGetSecretAESAlias:
Generate/return the secret object alias for an AES Secret Info type.
This will be called from qemuDomainSecretAESSetup.
qemuDomainSecretAESSetup: (private)
This API handles the details of the generation of the AES secret
and saves the pieces that need to be passed to qemu in order for
the secret to be decrypted. The encrypted secret based upon the
domain master key, an initialization vector (16 byte random value),
and the stored secret. Finally, the requirement from qemu is the IV
and encrypted secret are to be base64 encoded.
qemu_command.c:
qemuBuildSecretInfoProps: (private)
Generate/return a JSON properties object for the AES secret to
be used by both the command building and eventually the hotplug
code in order to add the secret object. Code was designed so that
in the future perhaps hotplug could use it if it made sense.
qemuBuildObjectSecretCommandLine (private)
Generate and add to the command line the -object secret for the
secret. This will be required for the subsequent RBD reference
to the object.
qemuBuildDiskSecinfoCommandLine (private)
Handle adding the AES secret object.
Adjustments:
qemu_domain.c:
The qemuDomainSecretSetup was altered to call either the AES or Plain
Setup functions based upon whether AES secrets are possible (we have
the encryption API) or not, we have secrets, and of course if the
protocol source is RBD.
qemu_command.c:
Adjust the qemuBuildRBDSecinfoURI API's in order to generate the
specific command options for an AES secret, such as:
-object secret,id=$alias,keyid=$masterKey,data=$base64encodedencrypted,
format=base64
-drive file=rbd:pool/image:id=myname:auth_supported=cephx\;none:\
mon_host=mon1.example.org\:6321,password-secret=$alias,...
where the 'id=' value is the secret object alias generated by
concatenating the disk alias and "-aesKey0". The 'keyid= $masterKey'
is the master key shared with qemu, and the -drive syntax will
reference that alias as the 'password-secret'. For the -drive
syntax, the 'id=myname' is kept to define the username, while the
'key=$base64 encoded secret' is removed.
While according to the syntax described for qemu commit '60390a21'
or as seen in the email archive:
https://lists.gnu.org/archive/html/qemu-devel/2016-01/msg04083.html
it is possible to pass a plaintext password via a file, the qemu
commit 'ac1d8878' describes the more feature rich 'keyid=' option
based upon the shared masterKey.
Add tests for checking/comparing output.
NB: For hotplug, since the hotplug code doesn't add command line
arguments, passing the encoded secret directly to the monitor
will suffice.
Move the logic from qemuDomainGenerateRandomKey into this new
function, altering the comments, variable names, and error messages
to keep things more generic.
NB: Although perhaps more reasonable to add soemthing to virrandom.c.
The virrandom.c was included in the setuid_rpc_client, so I chose
placement in vircrypto.
Introduce virCryptoHaveCipher and virCryptoEncryptData to handle
performing encryption.
virCryptoHaveCipher:
Boolean function to determine whether the requested cipher algorithm
is available. It's expected this API will be called prior to
virCryptoEncryptdata. It will return true/false.
virCryptoEncryptData:
Based on the requested cipher type, call the specific encryption
API to encrypt the data.
Currently the only algorithm support is the AES 256 CBC encryption.
Adjust tests for the API's
According to QEMU docs, the '-m' option for specifying RAM is by default
in MiB, and a suffix of "M" or "G" may be passed for values in MiB and
GiB respectively. This commit adds support and a test for the same.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=812295
Signed-off-by: Nishith Shah <nishithshah.2211@gmail.com>
Both VNC and SPICE requires the same code to resolve address for listen
type network. Remove code duplication and create a new function that
will be used in qemuProcessSetupGraphics().
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Move code that decide whether we print the 'listen' attribute or not
into virDomainGraphicsListenDefFormatAddr() function.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
All callers of cpuGetModels expect @models to be NULL-terminated. Once
both x86GetModels and ppc64GetModels were fixed to meet this
expectation, we can explicitly document it.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The architecture specific loaders are now called with a list of all
elements of a given type (rather than a single element at a time). This
avoids the need to reallocate the arrays in CPU maps for each element.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the models in a linked list. Especially
when we know upfront the total number of models we are loading.
As a nice side effect, this fixes ppc64GetModels to always return a
NULL-terminated list of models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the vendors in a linked list. Especially
when we know upfront the total number of models we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the features in a linked list. Especially
when we know upfront the total number of features we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the vendors in a linked list. Especially
when we know upfront the total number of models we are loading.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
There's no reason for keeping the models in a linked list. Especially
when we know upfront the total number of models we are loading.
As a nice side effect, this fixes x86GetModels to always return a
NULL-terminated list of models.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
For some disk types (SD), we want to emit the syntax
we used for disks before -device was available even
if QEMU supports -device.
Use the qemuDiskBusNeedsDeviceArg helper to figure out
whether to use the old or new syntax.
Name the validation function distinctively since it's called in the
parser. Later patches will add function that will validate disk
definitions that are invalid but need to be parsed to avoid losing
domains.
Seems recent versions of Coverity have (mostly) resolved the issue using
ternary operations in VIR_FREE (and now VIR_DISPOSE*) macros. So let's
just remove it and if necessary handle one off issues as the arise.
Rather than return 0/-1 and/or a pointer to some memory, adjust the
helper to just return the allocated structure or NULL on failure.
Adjust the callers in order to handle that
Signed-off-by: John Ferlan <jferlan@redhat.com>
If we get to the error: label and clear out the *virtual_functions[]
pointers and then return w/ error to the caller - the caller has it's
own cleanup of the same array in the out: label which is keyed off the
value of num_virt_fns, which wasn't reset to 0 in the called function
leading to a possible problem.
Just clear the value (found by Coverity)
Signed-off-by: John Ferlan <jferlan@redhat.com>
Use the recently added job functions and unlock the virDomainObj while
performing the respective modify operation.
This commit affects lxcDomain{DestroyFlags, Reboot, SetBlkioParameters,
SetMemoryParameters, SetMetadata, SetSchedulerParameterFlags, ShutdownFlags}
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
These operations aren't necessarily time consuming, but need to
wait in the queue of modify jobs.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Large balloon operation can be time consuming. Use the recently
added job functions and unlock the virDomainObj while ballooning.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Creating a large domain could potentially be time consuming. Use the
recently added job functions and unlock the virDomainObj while
the create operation is in progress.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
Follows the pattern used in the libxl driver for managing multiple,
simultaneous jobs within the driver.
Signed-off-by: Katerina Koukiou <k.koukiou@gmail.com>
If the stats for a block device can't be acquired from qemu we've
fallen back to loading them from the file on the disk in libvirt.
If qemu is not cooperating due to being stuck on an inaccessible NFS
share we would then attempt to read the files and get stuck too with
the VM object locked. All other APIs would eventually get stuck waiting
on the VM lock.
Avoid this problem by skipping the block stats if the VM is online but
the monitor did not provide any stats.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1337073
Some Intel processor families (e.g. the Intel Xeon processor E5 v3
family) introduced some RDT (Resource Director Technology) features
to monitor or control shared resource. Among these features, MBM
(Memory Bandwidth Monitoring), which is build on the CMT (Cache
Monitoring Technology) infrastructure, provides OS/VMM a way to
monitor bandwidth from one level of cache to another.
With current perf framework, this patch adds support to perf event
for MBM.
Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com>
vz puts uuids into curly braces. Simply introduce new contstant to reflect this
and get rid of magic +2 in code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Peer to peer migration is implemented just as in managed case. Basically
it is copy paste from managed case but with all the branches that are not
applied to vz removed.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
The newest version of migration protocol - version 3 with parameters is implemented.
Supported flags is VIR_MIGRATE_PAUSED only. Supported parameters are
VIR_MIGRATE_PARAM_URI and VIR_MIGRATE_PARAM_DEST_NAME. VIR_MIGRATE_PARAM_DEST_XML
is in VZ_MIGRATION_PARAMETERS for technical onyl reasons.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
This session uuid acts as authN token for different multihost vz operations one
of which is migration. Unfortunately we can't get it from server at any time
thus we need to save it at login.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Opposite operation to virAdmServerGetClientLimits. Understandably though,
setting values for current number of clients connected or still waiting
for authentication does not make sense, since changes to these values are event
dependent, i.e. a client connects - counter is increased. Thus only the limits
to maximum clients connected and waiting for authentication can be set. Should
a request for other controls to be set arrive (provided such a setting will
be first introduced to the config), the set of configuration controls can be
later expanded (thanks to typed params). This patch also introduces a
constraint that the maximum number of clients waiting for authentication has to
be less than the overall maximum number of clients connected and any attempt to
violate this constraint will be denied.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Enable retrieval of the number of maximum clients connected to all sockets
combined, as well as the number of maximum clients waiting for authentication,
in order to be successfully connected. These are the attributes configurable
through libvirtd.conf, however, it could be handy to not only know values for
these limits, but also the values for the current number of clients
connected and number of clients currently waiting for authentication which are
changing dynamically. This API does both, retrieves the limits as well as the
current dynamic values.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Add some trivial getters for client related attributes to virnetserver before
any admin method can be introduced.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
QEMU needs access to the /dev/dri/render* device for
virgl to work.
Allow access to all /dev/dri/* devices for domains with
<video>
<model type='virtio' heads='1' primary='yes'>
<acceleration accel3d='yes'/>
</model>
</video>
https://bugzilla.redhat.com/show_bug.cgi?id=1337290
All qemu versions we support have QEMU_CAPS_DEVICE, so checking
for it is redundant. Remove the usage.
The code diff isn't clear, but all that code is just inindented
with no other change.
Test cases that hit qemuDomainAssignAddresses but don't have
infrastructure for specifying qemuCaps values see lots of
churn, since now PCI addresses are in the XML output.
hotplug APIs with the AFFECT_CONFIG flag are essentially replicating
'insert <device> into XML document, and redefine XML'. Thinking of
it this way, it's natural that we call virDomainDefPostParse after
manually editing the XML here.
Not only does doing so allow us to drop a bunch of open coded calls
to qemuDomainAssignAddresses, but it also means we are going through
the standard channels for XML validation and potentially catching
errors in user submitted XML.
This wires up qemuDomainAssignAddresses into the new
virDomainDefAssignAddressesCallback, so it's always triggered
via virDomainDefPostParse. We are essentially doing this already
with open coded calls sprinkled about.
qemu argv parse output changes slightly since previously it wasn't
hitting qemuDomainAssignAddresses.
This solution does not keep snapshots cache because vz sdk lacks good support
for snapshot related events.
Libvirt and vz sdk has different approach to snapshot ids. vz sdk always
auto generate them while libvirt has ability to specify id by user.
Thus I have no other choice rather than simply ignore ids set by user
or generated by libvirt.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
https://bugzilla.redhat.com/show_bug.cgi?id=1331552
Instead of disabling auto-login of all scsi targets (even those
that do not "belong" to libvirt), use iscsiadm's "--op nonpersistent"
during discovery of iSCSI targets (e.g. "iscsiadm --mode discovery
--type sendtargets") in order to avoid the node database being altered
which led to the need for the "large hammer" approach taken by
commit id '3c12b654'.
This commit removes the virISCSITargetAutologin adjustment (eg. the setting
of node.startup to "manual"). The iscsiadm command has supported this mode
of operation as of commit id 'ad873767' to open-iscsi.
Utilize the exit status parameter for virCommandRunRegex in order to
check the return error from the 'iscsiadm --mode session' command.
Without this enabled, if there are no sessions running then virCommandRun
would have displayed an error such as:
2016-05-13 15:17:15.165+0000: 10920: error : virCommandWait:2553 :
internal error: Child process (iscsiadm --mode session)
unexpected exit status 21: iscsiadm: No active sessions.
It is possible that for certain paths (when probe is true) we only care
whether it's running or not to make certain decisions. Spitting out
the error for those paths is unnecessary.
If we do have a situation where probe = false and there's an error,
then display the error from iscsiadm if it's there.
Rather than have virCommandRun just spit out the error, allow callers
to decide to pass the exitstatus so the caller can make intelligent
decisions based on the error.
When the <gic/> element in not present in the domain XML, use the
domain capabilities to figure out what GIC version is usable and
choose that one automatically.
This allows guests to be created on hardware that only supports
GIC v3 without having to update virt-manager and similar tools.
Keep using the default GIC version if the <gic/> element has been
added to the domain XML but no version has been specified, as not
to break existing guests.
According to current xl.cfg docs and xl codes, it uses type=vif
instead of type=netfront.
Currently after domxml-to-native, libvirt xml model=netfront will be
converted to xl type=netfront. This has no problem before, xen codes
for a long time just check type=ioemu, if not, set type to _VIF.
Since libxl uses parse_nic_config to avoid duplicate codes, it
compares 'type=vif' and 'type=ioemu' for valid parameters, others
are considered as invalid, thus we have problem with type=netfront
in xl config file.
#xl create sles12gm-hvm.orig
Parsing config from sles12gm-hvm.orig
Invalid parameter `type'.
Correct the conversion in libvirt, so that it matchs libxl codes
and also xl.cfg.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
SDK handles empty cdroms all right. We just need to
pass "" instead of NULL (not setting is good too).
However we can get problems here. Disk detaching treats source
as ids. Fortunately disk detaching is not supported for cdroms
yet and for hard disks we can not get empty source - this is prohibitited
by xml parsing code.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
Signed-off-by: Maxim Nestratov <mnestratov@virtuozzo.com>
Current version of the function does not check format of cdroms at all.
At the same time prlsdkGetDiskInfo give hints that cdroms always
have format VIR_STORAGE_FILE_RAW. So fix vzCheckUnsupportedDisks.
About structure of checks. As we don't have means to store format
in SDK we always have only one format in every situation. So instead
of setting boolean let's get allowed format instead and finally compare
it to the requested. This structure of checks seems stable to me
because we have only one format in every situation.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
